- 27 Jul, 2017 29 commits
-
-
Yoshihiro Shimoda authored
This patch adds support for usb2.0 host ch3 device nodes for R-Car H3 ES2.0. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Yoshihiro Shimoda authored
This patch adds support for usb3_phy ch3 device node for R-Car H3 ES2.0. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Kazuya Mizuguchi authored
This patch adds the "companion" property in the EHCI ch0, ch1 and ch2 nodes to wait for the usb companion controller startup at resume. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [remove ch3 node and revise the commit log] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Basic support for the Renesas Draak board based on R-Car D3: - Memory, - Main crystal, - Serial console, - Watchdog. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Basic support for the R-Car D3 SoC: - PSCI, - CPU, - Cache controller, - Main clocks and controller, - Interrupt controller, - Timer, - Watchdog, - PMU, - Reset controller, - Product register, - System controller, - UART for console. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Add a configuration option for the R-Car D3 SoC. Note that r8a77995 is the first Renesas "r8a<n>" SoC using a 5 digit number in its Kconfig symbol, as r8a77990 will be a different SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
The DU dot clocks 0 and 3 are provided by the programmable VC6 clock generator. Connect them to the clock source node. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
The VC6 is an I2C-controlled programmable clock generator, used on the board to provide a display dot clock. Add it to DT. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
MSIOF0 and MSIOF1 are tied to two DMA controllers through two pairs of DMA specifiers. However, the second pair of corresponding DMA names was missing. Fixes: 80fab06e ("arm64: dts: r8a7796: Add all MSIOF nodes") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
Add the device nodes for all MSIOF SPI controllers, incl. clocks, power domain, dma, and reset properties. Due to a hardware erratum on R-Car H3 ES1.x, using MSIOF for SPI is only supported on ES2.0 and later. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
Add a compatible string and VSP links to the DU node. The H3 ES1.x and H3 ES2.0 are compatible save for the links to the VSPs that are described explicitly in DT, so there's no need for a new ES2-specific compatible string. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Vladimir Barinov authored
Enable the HDMI encoder for ULCB board and hook it up to the HDMI connector. The HDMI encoder and connector are available on both the H3 and M3-W ULCB boards. Add them to the ulcb.dtsi file. Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Vladimir Barinov authored
The ULCB board has one HDMI output connector. This connector is available on both the H3 and M3-W ULCB boards. Add this to the ulcb.dtsi file. Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Vladimir Barinov authored
The DU0/DU1/DU2 external dot clocks are provided by the programmable Versaclock5 clock generator. Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Vladimir Barinov authored
The DU0/DU1/DU2/DU3 external dot clocks are provided by the programmable Versaclock5 clock generator. Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Vladimir Barinov authored
The DU0/DU1/DU2/DU3 external dot clocks are generated by an I2C-controlled programmable clock generator. Clock generator is available on both the H3 and M3-W ULCB boards. Add this to the ulcb.dtsi file. Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
Enable the HDMI encoder for the M3-W Salvator-X board and hook it up to the HDMI connector. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
The DU1 external dot clock is provided by the fixed frequency clock generator X21, while the DU0 and DU2 clocks are provided by the programmable Versaclock5 clock generator. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
Add the HDMI encoder to the R8A7796 DT in disabled state. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
Add the DU device to r8a7796.dtsi in a disabled state. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
The r8a7796 has 5 VSP instances. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
The FCPs handle the interface between various IP cores and memory. Add the instances related to the FDPs and VSP2s. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Vladimir Barinov authored
This enables I2C4 for ULCB board Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Vladimir Barinov authored
This enables I2C for DVFS device for ULCB board Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Ramesh Shanmugasundaram authored
Adds the DRIF controller nodes for r8a7795. Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Ramesh Shanmugasundaram authored
Adds the DRIF controller nodes for r8a7796. Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Geert Uytterhoeven authored
The definition of CPG_AUDIO_CLK_I is SoC-specific, not board-specific. Hence move it from the board-specific .dts files to the SoC-specific .dtsi files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Sergei Shtylyov authored
Describe the IMR-LX4 devices in the R8A7796 device tree. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
Sergei Shtylyov authored
Describe the IMR-LX4 devices in the R8A7795 device tree. Based on the original (and large) patch by Konstantin Kozhevnikov <Konstantin.Kozhevnikov@cogentembedded.com>. Signed-off-by: Konstantin Kozhevnikov <Konstantin.Kozhevnikov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-
- 15 Jul, 2017 11 commits
-
-
Linus Torvalds authored
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation format standardization from Jonathan Corbet: "This series converts a number of top-level documents to the RST format without incorporating them into the Sphinx tree. The hope is to bring some uniformity to kernel documentation and, perhaps more importantly, have our existing docs serve as an example of the desired formatting for those that will be added later. Mauro has gone through and fixed up a lot of top-level documentation files to make them conform to the RST format, but without moving or renaming them in any way. This will help when we incorporate the ones we want to keep into the Sphinx doctree, but the real purpose is to bring a bit of uniformity to our documentation and let the top-level docs serve as examples for those writing new ones" * tag 'standardize-docs' of git://git.lwn.net/linux: (84 commits) docs: kprobes.txt: Fix whitespacing tee.txt: standardize document format cgroup-v2.txt: standardize document format dell_rbu.txt: standardize document format zorro.txt: standardize document format xz.txt: standardize document format xillybus.txt: standardize document format vfio.txt: standardize document format vfio-mediated-device.txt: standardize document format unaligned-memory-access.txt: standardize document format this_cpu_ops.txt: standardize document format svga.txt: standardize document format static-keys.txt: standardize document format smsc_ece1099.txt: standardize document format SM501.txt: standardize document format siphash.txt: standardize document format sgi-ioc4.txt: standardize document format SAK.txt: standardize document format rpmsg.txt: standardize document format robust-futexes.txt: standardize document format ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/randomLinus Torvalds authored
Pull random updates from Ted Ts'o: "Add wait_for_random_bytes() and get_random_*_wait() functions so that callers can more safely get random bytes if they can block until the CRNG is initialized. Also print a warning if get_random_*() is called before the CRNG is initialized. By default, only one single-line warning will be printed per boot. If CONFIG_WARN_ALL_UNSEEDED_RANDOM is defined, then a warning will be printed for each function which tries to get random bytes before the CRNG is initialized. This can get spammy for certain architecture types, so it is not enabled by default" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: reorder READ_ONCE() in get_random_uXX random: suppress spammy warnings about unseeded randomness random: warn when kernel uses unseeded randomness net/route: use get_random_int for random counter net/neighbor: use get_random_u32 for 32-bit hash random rhashtable: use get_random_u32 for hash_rnd ceph: ensure RNG is seeded before using iscsi: ensure RNG is seeded before use cifs: use get_random_u32 for 32-bit lock random random: add get_random_{bytes,u32,u64,int,long,once}_wait family random: add wait_for_random_bytes() API
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull ->s_options removal from Al Viro: "Preparations for fsmount/fsopen stuff (coming next cycle). Everything gets moved to explicit ->show_options(), killing ->s_options off + some cosmetic bits around fs/namespace.c and friends. Basically, the stuff needed to work with fsmount series with minimum of conflicts with other work. It's not strictly required for this merge window, but it would reduce the PITA during the coming cycle, so it would be nice to have those bits and pieces out of the way" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: isofs: Fix isofs_show_options() VFS: Kill off s_options and helpers orangefs: Implement show_options 9p: Implement show_options isofs: Implement show_options afs: Implement show_options affs: Implement show_options befs: Implement show_options spufs: Implement show_options bpf: Implement show_options ramfs: Implement show_options pstore: Implement show_options omfs: Implement show_options hugetlbfs: Implement show_options VFS: Don't use save/replace_mount_options if not using generic_show_options VFS: Provide empty name qstr VFS: Make get_filesystem() return the affected filesystem VFS: Clean up whitespace in fs/namespace.c and fs/super.c Provide a function to create a NUL-terminated string from unterminated data
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more __copy_.._user elimination from Al Viro. * 'work.__copy_to_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: drm_dp_aux_dev: switch to read_iter/write_iter
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull uacess-unaligned removal from Al Viro: "That stuff had just one user, and an exotic one, at that - binfmt_flat on arm and m68k" * 'work.uaccess-unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kill {__,}{get,put}_user_unaligned() binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull network field-by-field copy-in updates from Al Viro: "This part of the misc compat queue was held back for review from networking folks and since davem has jus ACKed those..." * 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: get_compat_bpf_fprog(): don't copyin field-by-field get_compat_msghdr(): get rid of field-by-field copyin copy_msghdr_from_user(): get rid of field-by-field copyin
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "Boston platform support: - Document DT bindings - Add CLK driver for board clocks CM: - Avoid per-core locking with CM3 & higher - WARN on attempt to lock invalid VP, not BUG CPS: - Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6 - Prevent multi-core with dcache aliasing - Handle cores not powering down more gracefully - Handle spurious VP starts more gracefully DSP: - Add lwx & lhx missaligned access support eBPF: - Add MIPS support along with many supporting change to add the required infrastructure Generic arch code: - Misc sysmips MIPS_ATOMIC_SET fixes - Drop duplicate HAVE_SYSCALL_TRACEPOINTS - Negate error syscall return in trace - Correct forced syscall errors - Traced negative syscalls should return -ENOSYS - Allow samples/bpf/tracex5 to access syscall arguments for sane traces - Cleanup from old Kconfig options in defconfigs - Fix PREF instruction usage by memcpy for MIPS R6 - Fix various special cases in the FPU eulation - Fix some special cases in MIPS16e2 support - Fix MIPS I ISA /proc/cpuinfo reporting - Sort MIPS Kconfig alphabetically - Fix minimum alignment requirement of IRQ stack as required by ABI / GCC - Fix special cases in the module loader - Perform post-DMA cache flushes on systems with MAARs - Probe the I6500 CPU - Cleanup cmpxchg and add support for 1 and 2 byte operations - Use queued read/write locks (qrwlock) - Use queued spinlocks (qspinlock) - Add CPU shared FTLB feature detection - Handle tlbex-tlbp race condition - Allow storing pgd in C0_CONTEXT for MIPSr6 - Use current_cpu_type() in m4kc_tlbp_war() - Support Boston in the generic kernel Generic platform: - yamon-dt: Pull YAMON DT shim code out of SEAD-3 board - yamon-dt: Support > 256MB of RAM - yamon-dt: Use serial* rather than uart* aliases - Abstract FDT fixup application - Set RTC_ALWAYS_BCD to 0 - Add a MAINTAINERS entry core kernel: - qspinlock.c: include linux/prefetch.h Loongson 3: - Add support Perf: - Add I6500 support SEAD-3: - Remove GIC timer from DT - Set interrupt-parent per-device, not at root node - Fix GIC interrupt specifiers SMP: - Skip IPI setup if we only have a single CPU VDSO: - Make comment match reality - Improvements to time code in VDSO" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits) locking/qspinlock: Include linux/prefetch.h MIPS: Fix MIPS I ISA /proc/cpuinfo reporting MIPS: Fix minimum alignment requirement of IRQ stack MIPS: generic: Support MIPS Boston development boards MIPS: DTS: img: Don't attempt to build-in all .dtb files clk: boston: Add a driver for MIPS Boston board clocks dt-bindings: Document img,boston-clock binding MIPS: Traced negative syscalls should return -ENOSYS MIPS: Correct forced syscall errors MIPS: Negate error syscall return in trace MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select MIPS16e2: Provide feature overrides for non-MIPS16 systems MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions MIPS: MIPS16e2: Identify ASE presence MIPS: VDSO: Fix a mismatch between comment and preprocessor constant MIPS: VDSO: Add implementation of gettimeofday() fallback MIPS: VDSO: Add implementation of clock_gettime() fallback MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse() MIPS: Use current_cpu_type() in m4kc_tlbp_war() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML updates from Richard Weinberger: "Mostly fixes for UML: - First round of fixes for PTRACE_GETRESET/SETREGSET - A printf vs printk cleanup - Minor improvements" * 'for-linus-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Correctly check for PTRACE_GETRESET/SETREGSET um: v2: Use generic NOTES macro um: Add kerneldoc for userspace_tramp() and start_userspace() um: Add kerneldoc for segv_handler um: stub-data.h: remove superfluous include um: userspace - be more verbose in ptrace set regs error um: add dummy ioremap and iounmap functions um: Allow building and running on older hosts um: Avoid longjmp/setjmp symbol clashes with libpthread.a um: console: Ignore console= option um: Use os_warn to print out pre-boot warning/error messages um: Add os_warn() for pre-boot warning/error messages um: Use os_info for the messages on normal path um: Add os_info() for pre-boot information messages um: Use printk instead of printf in make_uml_dir
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBIFS updates from Richard Weinberger: - Updates and fixes for the file encryption mode - Minor improvements - Random fixes * tag 'upstream-4.13-rc1' of git://git.infradead.org/linux-ubifs: ubifs: Set double hash cookie also for RENAME_EXCHANGE ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrs ubifs: Don't leak kernel memory to the MTD ubifs: Change gfp flags in page allocation for bulk read ubifs: Fix oops when remounting with no_bulk_read. ubifs: Fail commit if TNC is obviously inconsistent ubifs: allow userspace to map mounts to volumes ubifs: Wire-up statx() support ubifs: Remove dead code from ubifs_get_link() ubifs: Massage debug prints wrt. fscrypt ubifs: Add assert to dent_key_init() ubifs: Fix unlink code wrt. double hash lookups ubifs: Fix data node size for truncating uncompressed nodes ubifs: Don't encrypt special files on creation ubifs: Fix memory leak in RENAME_WHITEOUT error path in do_rename ubifs: Fix inode data budget in ubifs_mknod ubifs: Correctly evict xattr inodes ubifs: Unexport ubifs_inode_slab ubifs: don't bother checking for encryption key in ->mmap() ubifs: require key for truncate(2) of encrypted file
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more KVM updates from Radim Krčmář: "Second batch of KVM updates for v4.13 Common: - add uevents for VM creation/destruction - annotate and properly access RCU-protected objects s390: - rename IOCTL added in the first v4.13 merge x86: - emulate VMLOAD VMSAVE feature in SVM - support paravirtual asynchronous page fault while nested - add Hyper-V userspace interfaces for better migration - improve master clock corner cases - extend internal error reporting after EPT misconfig - correct single-stepping of emulated instructions in SVM - handle MCE during VM entry - fix nVMX VM entry checks and nVMX VMCS shadowing" * tag 'kvm-4.13-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) kvm: x86: hyperv: make VP_INDEX managed by userspace KVM: async_pf: Let guest support delivery of async_pf from guest mode KVM: async_pf: Force a nested vmexit if the injected #PF is async_pf KVM: async_pf: Add L1 guest async_pf #PF vmexit handler KVM: x86: Simplify kvm_x86_ops->queue_exception parameter list kvm: x86: hyperv: add KVM_CAP_HYPERV_SYNIC2 KVM: x86: make backwards_tsc_observed a per-VM variable KVM: trigger uevents when creating or destroying a VM KVM: SVM: Enable Virtual VMLOAD VMSAVE feature KVM: SVM: Add Virtual VMLOAD VMSAVE feature definition KVM: SVM: Rename lbr_ctl field in the vmcb control area KVM: SVM: Prepare for new bit definition in lbr_ctl KVM: SVM: handle singlestep exception when skipping emulated instructions KVM: x86: take slots_lock in kvm_free_pit KVM: s390: Fix KVM_S390_GET_CMMA_BITS ioctl definition kvm: vmx: Properly handle machine check during VM-entry KVM: x86: update master clock before computing kvmclock_offset kvm: nVMX: Shadow "high" parts of shadowed 64-bit VMCS fields kvm: nVMX: Fix nested_vmx_check_msr_bitmap_controls kvm: nVMX: Validate the I/O bitmaps on nested VM-entry ...
-