- 09 Feb, 2009 17 commits
-
-
Vivek Natarajan authored
Enable operating mode specific interrupts in ath9k_add_interface instead of ath9k_start. Signed-off-by:
Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Sujith authored
This patch fixes the lockdep warning shown below, and also initializes the starting sequence number when starting a TX aggregation session. ============================================= [ INFO: possible recursive locking detected ] 2.6.29-rc2-wl #21 --------------------------------------------- swapper/0 is trying to acquire lock: (_xmit_IEEE80211#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290 but task is already holding lock: (_xmit_IEEE80211#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290 other info that might help us debug this: 7 locks held by swapper/0: #0: (rcu_read_lock){..--}, at: [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 #1: (_xmit_ETHER#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290 #2: (rcu_read_lock){..--}, at: [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 #3: (_xmit_IEEE80211#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290 #4: (rcu_read_lock){..--}, at: [<ffffffffa0154919>] ieee80211_master_start_xmit+0x219/0x6c0 [mac80211] #5: (rcu_read_lock){..--}, at: [<ffffffffa01427c6>] ieee80211_start_tx_ba_session+0x66/0x4e0 [mac80211] #6: (rcu_read_lock){..--}, at: [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.29-rc2-wl #21 Call Trace: <IRQ> [<ffffffff8026c329>] __lock_acquire+0x1be9/0x1c40 [<ffffffff80442af1>] dev_queue_xmit+0xe1/0x620 [<ffffffff8026a8cc>] __lock_acquire+0x18c/0x1c40 [<ffffffff8026c3d5>] lock_acquire+0x55/0x70 [<ffffffff80456d71>] __qdisc_run+0x221/0x290 [<ffffffff804dbeb9>] _spin_lock+0x39/0x50 [<ffffffff80456d71>] __qdisc_run+0x221/0x290 [<ffffffff804dbd2f>] _spin_unlock+0x1f/0x50 [<ffffffff80456d71>] __qdisc_run+0x221/0x290 [<ffffffff80442d18>] dev_queue_xmit+0x308/0x620 [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 [<ffffffffa0142a63>] ieee80211_start_tx_ba_session+0x303/0x4e0 [mac80211] [<ffffffffa01427c6>] ieee80211_start_tx_ba_session+0x66/0x4e0 [mac80211] [<ffffffffa0149dae>] rate_control_get_rate+0xae/0xc0 [mac80211] [<ffffffffa01526b5>] invoke_tx_handlers+0x655/0x1000 [mac80211] [<ffffffff802699fd>] mark_held_locks+0x4d/0x90 [<ffffffff804dbcf5>] _spin_unlock_irqrestore+0x65/0x80 [<ffffffffa0151aaa>] __ieee80211_tx_prepare+0x16a/0x310 [mac80211] [<ffffffffa0151adc>] __ieee80211_tx_prepare+0x19c/0x310 [mac80211] [<ffffffff80439cc2>] pskb_expand_head+0x112/0x190 [<ffffffffa0154986>] ieee80211_master_start_xmit+0x286/0x6c0 [mac80211] [<ffffffffa0154919>] ieee80211_master_start_xmit+0x219/0x6c0 [mac80211] [<ffffffff8026a8cc>] __lock_acquire+0x18c/0x1c40 [<ffffffff80456d8e>] __qdisc_run+0x23e/0x290 [<ffffffff80442d18>] dev_queue_xmit+0x308/0x620 [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 [<ffffffffa0154221>] ieee80211_subif_start_xmit+0x4a1/0x980 [mac80211] [<ffffffffa0153f18>] ieee80211_subif_start_xmit+0x198/0x980 [mac80211] [<ffffffff80456d8e>] __qdisc_run+0x23e/0x290 [<ffffffff80442d18>] dev_queue_xmit+0x308/0x620 [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 [<ffffffffa028ecfd>] ip6_output+0x62d/0x1230 [ipv6] [<ffffffff8024ca00>] __mod_timer+0xb0/0xd0 [<ffffffffa02ad25a>] mld_sendpack+0x3fa/0x4a0 [ipv6] [<ffffffffa02ace60>] mld_sendpack+0x0/0x4a0 [ipv6] [<ffffffffa02adf90>] mld_ifc_timer_expire+0x0/0x340 [ipv6] [<ffffffffa02ae219>] mld_ifc_timer_expire+0x289/0x340 [ipv6] [<ffffffffa02adf90>] mld_ifc_timer_expire+0x0/0x340 [ipv6] [<ffffffff8024c097>] run_timer_softirq+0x147/0x220 [<ffffffff802473fb>] __do_softirq+0x9b/0x180 [<ffffffff80265516>] tick_dev_program_event+0x36/0xb0 [<ffffffff8020d77c>] call_softirq+0x1c/0x30 [<ffffffff8020f2c5>] do_softirq+0x65/0xb0 [<ffffffff80246ebd>] irq_exit+0x9d/0xc0 [<ffffffff80221db6>] smp_apic_timer_interrupt+0x86/0xd0 [<ffffffff8020d1b3>] apic_timer_interrupt+0x13/0x20 Signed-off-by:Sujith <Sujith.Manoharan@atheros.com> Signed-off-by:
-
Ivo van Doorn authored
The get_firmware_crc() callback function isn't flexible enough when dealing with multiple firmware versions. It might in some cases be possible that the firmware file contains multiple CRC checksums. Create the check_firmware() callback function where the driver has complete freedom in how to validate the firmware. Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Ivo van Doorn authored
provide rt2x00lib the possibility to kill a particular TX queue. This can be useful when disabling the radio, but more importantly will allow beaconing to be disabled when mac80211 requests this (during scanning for example) Signed-off-by:
-
Ivo van Doorn authored
ieee80211_iterate_active_interfaces() no longer acquires the RTNL lock which means the intf_work handler can be safely used from the mac80211 workqueue again. Signed-off-by:
-
Winkler, Tomas authored
This patch unifies 3945 and iwlagn power save management This patch also better separates system state from user setting. System state shall be removed later as this shall be shifted to user space Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Acked-by:
Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Tomas Winkler authored
Call IWL_DEBUG macro with explicit priv argument. Signed-off-by:
Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by:
-
Winkler, Tomas authored
pci_enable_device is tagged with __must_check therefore don't ignore the return value in pci_resume handlers Signed-off-by:
-
Winkler, Tomas authored
iwl3945_send_tx_power must be static Signed-off-by:
-
Winkler, Tomas authored
This patch adds __maybe_unused attribute to priv variables used in functions that used it solely for debug printouts Signed-off-by:
-
Samuel Ortiz authored
The iwl_rxon_cmd is really just a iwl3945_rxon_cmd structure extension. So, we can use the *_rxon fields from iwl_priv instead of the 3945 specific ones (*39_rxon). We have to then be careful when submitting REPLY_RXON host commands, since the command length as to be set according to the HW. As another precaution the reserved4 and reserved5 fields are cleared before being sent to the 3945. With the *39_rxon removal, a lot of duplicated code can be removed from the 3945 code base. Signed-off-by:
-
Andrey Borzenkov authored
Fix errors and obvious warnings reported by checkpatch in all files except orinoco.c. Orinoco.c is part of different patch series of Dave. Signed-off-by:
Andrey Borzenkov <arvidjaar@gmail.com> Signed-off-by:
-
Herbert Xu authored
gro: Optimise TCP packet reception As this function can be called more than half a million times for 10GbE, it's important to optimise it as much as we can. This patch uses bit ops to logical ops, as well as open coding memcmp to exploit alignment properties. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
As this function can be called more than half a million times for 10GbE, it's important to optimise it as much as we can. This patch does some obvious changes to use 2-byte and 4-byte operations instead of byte-oriented ones where possible. Bit ops are also used to replace logical ops to reduce branching. Signed-off-by:
-
Herbert Xu authored
This patch optimises the Ethernet header comparison to use 2-byte and 4-byte xors instead of memcmp. In order to facilitate this, the actual comparison is now carried out by the callers of the shared dev_gro_receive function. This has a significant impact when receiving 1500B packets through 10GbE. Signed-off-by:
-
Herbert Xu authored
This patch prepares for the move of the same_flow checks out of dev_gro_receive. As such we need to remember the number of held packets since doing a loop just to count them every time is silly. Signed-off-by:
-
David S. Miller authored
Several devices need to insert some "pre headers" in front of the main packet data when they transmit a packet. Currently we allocate only 16 bytes of pad room and this ends up not being enough for some types of hardware (NIU, usb-net, s390 qeth, etc.) So increase this to 32. Note that drivers still need to check in their transmit routine whether enough headroom exists, and if not use skb_realloc_headroom(). Tunneling, IPSEC, and other encapsulation methods can cause the padding area to be used up. Signed-off-by:
-
- 07 Feb, 2009 23 commits
-
-
David S. Miller authored
Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl3945-base.c
-
Jesse Brandeburg authored
Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Alexander Duyck authored
Update the version number to 1.3.16 and update copyright dates for 2009. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Alexander Duyck authored
This patch addresses two minor items I found while cleaning up the igb driver for our sourceforge version. The first clears the context index if we don't flag that we need it. The second item is that eims_other should be used instead of bit defines when setting all of the EICS bits prior to reset. Signed-off-by:
-
Alexander Duyck authored
It was seen with repeated interface up/down testing that there was a large stray between the stats reported by the queues and the stats reported by the HW. It was found to be an issue in that hw stats were being reset without first being recorded. This change records the stats before wiping them from the system via the reset. Signed-off-by:
-
Alexander Duyck authored
Remove the setting of ring->count variables from igb_probe as they are duplicating the same configuration that is done igb_alloc_queues. Remove the err_hw_init tag as it can be replaced by err_sw_init. Signed-off-by:
-
Alexander Duyck authored
The disable_av variable is never used by the driver and provides no value as it is likely a leftover debugging variable. I have removed it and replaced the one spot that checked for it with a check for a valid address. Signed-off-by:
-
Alexander Duyck authored
As additional hardware is added to the igb driver it is easier to support the expansion via switch statements instead of using nested ifs. For this reason I am changing this to a switch statement. Signed-off-by:
-
Alexander Duyck authored
Move igb_get_hw_control up so that it is called just after the reset in igb_resume. This notifies the HW sooner that the driver is reassuming control of the device. Signed-off-by:
-
Alexander Duyck authored
The interrupt handler was reading eicr and then doing nothing with the result. I have removed the variable and the register read since they provide no value to the legacy interrupt handler. Signed-off-by:
-
Alexander Duyck authored
There were several spots in the code making calls to adapter->hw when they could have just been accessing hw-> directly. I cleaned up the spots where this was visibly apparent. Signed-off-by:
-
Alexander Duyck authored
There isn't much point in having the _82575 hanging off the end of this function since there aren't any other version of this function running around within this driver. This also allows for a bit of whitespace cleanup due to a shorter function name. Signed-off-by:
-
Alexander Duyck authored
The igb watchdog task is modifying the watchdog timer twice duing a single run. It only needs to be called once to reschedule itself for 2 seconds from the last time it ran. In addition I removed the allocation of the mac_info structure since it is only called twice and is easier to access via the e1000_hw struct. Signed-off-by:
-
Alexander Duyck authored
This patch cleans up igb_netpoll so that it is more friendly with both the current napi and newly introduced GRO features. Signed-off-by:
-
Alexander Duyck authored
Add a counter for dma out of sync errors reported via interrupt. Signed-off-by:
-
Alexander Duyck authored
Most of the code for the testing has pretty much become stale at this point and is need of update. This update just streamlines most of the code, widens the range of interrupt testing. Signed-off-by:
-
Alexander Duyck authored
This driver is currently using HW_CSUM which is not correct. Update this to use the IP_CSUM and IPV6_CSUM flags. In addition consolidate the TSO flag setting. Signed-off-by:
-
Alexander Duyck authored
This statistic is not used and so it is safe to remove Signed-off-by:
-
Alexander Duyck authored
All of the nvm ops have the tag _nvm added to the end which is redundant since all of the calls to the ops have to go through the nvm ops struct anyway. Signed-off-by:
-
Alexander Duyck authored
This patch renames write_phy_reg to write_reg and read_phy_reg to read_reg. It seems redundant to call out phy in an operation that is part of the phy_ops struct. Signed-off-by:
-
Alexander Duyck authored
Instead of pulling the mac address from EEPROM it is easier to pull it from the RAL/RAH registers and then just copy it into the address structures. Signed-off-by:
-
Alexander Duyck authored
This patch makes dev_spec a union and simplifies it so that it does not require dynamic allocation and freeing in the driver. Signed-off-by:
-
Alexander Duyck authored
Add a link check function to contain all activities related to verifying that the link is present. The current approach is a bit cludgy and needs to be cleaned up. Signed-off-by:
-
