- 02 Apr, 2015 40 commits
-
-
Guennadi Liakhovetski authored
V4L2 clocks, e.g. used by camera sensors for their master clock, do not have to be supplied by a different V4L2 driver, they can also be supplied by an independent source. In this case the standart kernel clock API should be used to handle such clocks. This patch adds support for such cases. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
Josh Wu <josh.wu@atmel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Guennadi Liakhovetski authored
All uses of the v4l2_clk API so far only register one clock with a fixed name. This allows us to get rid of it, which also will make CCF and DT integration easier. Signed-off-by:
-
Hans Verkuil authored
The check_ext_ctrls() function in v4l2-ioctl.c checks if all controls in the control array are from the same control class as c->ctrl_class. However, that check should only be done if c->ctrl_class != 0. A 0 value means that this restriction does not apply. So return 1 (OK) if c->ctrl_class == 0. Found by running v4l2-compliance on the uvc driver. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Hans Verkuil authored
The selection/cropping ioctls are only valid for video nodes, not for vbi. Found by v4l2-compliance when run on a VBI device node. Signed-off-by:
-
Hans Verkuil authored
Commit c5036d61 ("media: au0828: drop vbi_buffer_filled() and re-use buffer_filled()") broke video and vbi streaming. The vb2_buffer struct was copied instead of taking a pointer to it, but vb2_buffer_done() needs the real object, not a copy, since it is hooking the buffer into a different list. Signed-off-by:
-
Hans Verkuil authored
Fix the example of the V4L2_PIX_FMT_SGRBG8 Bayer format. The even lines should read BGBG, not RBRB. Signed-off-by:
-
Hans Verkuil authored
If CONFIG_VIDEO_CX231XX_RC is undefined, then these compiler warnings are generated: In file included from drivers/media/usb/cx231xx/cx231xx-cards.c:23:0: drivers/media/usb/cx231xx/cx231xx-cards.c: In function ‘cx231xx_release_resources’: drivers/media/usb/cx231xx/cx231xx.h:982:30: warning: statement with no effect [-Wunused-value] #define cx231xx_ir_exit(dev) (0) ^ drivers/media/usb/cx231xx/cx231xx-cards.c:1158:2: note: in expansion of macro ‘cx231xx_ir_exit’ cx231xx_ir_exit(dev); ^ drivers/media/usb/cx231xx/cx231xx-cards.c: In function ‘cx231xx_init_dev’: drivers/media/usb/cx231xx/cx231xx.h:981:30: warning: statement with no effect [-Wunused-value] #define cx231xx_ir_init(dev) (0) ^ drivers/media/usb/cx231xx/cx231xx-cards.c:1351:2: note: in expansion of macro ‘cx231xx_ir_init’ cx231xx_ir_init(dev); ^ drivers/media/usb/cx231xx/cx231xx-cards.c: In function ‘cx231xx_usb_probe’: drivers/media/usb/cx231xx/cx231xx.h:982:30: warning: statement with no effect [-Wunused-value] #define cx231xx_ir_exit(dev) (0) ^ drivers/media/usb/cx231xx/cx231xx-cards.c:1705:2: note: in expansion of macro ‘cx231xx_ir_exit’ cx231xx_ir_exit(dev); ^ drivers/media/usb/cx231xx/cx231xx-cards.c: In function ‘cx231xx_usb_disconnect’: drivers/media/usb/cx231xx/cx231xx.h:982:30: warning: statement with no effect [-Wunused-value] #define cx231xx_ir_exit(dev) (0) ^ drivers/media/usb/cx231xx/cx231xx-cards.c:1754:3: note: in expansion of macro ‘cx231xx_ir_exit’ cx231xx_ir_exit(dev); ^ Fix by using static inlines instead of defines. Signed-off-by: -
Arnd Bergmann authored
All other drivers using the TI_ST infrastructure use 'depends on' for this symbol, and it makes no sense to only enable that if CONFIG_NET is enable, because the radio driver also depends on CONFIG_NET itself: ERROR: "skb_queue_purge" [drivers/media/radio/wl128x/fm_drv.ko] undefined! ERROR: "skb_push" [drivers/media/radio/wl128x/fm_drv.ko] undefined! ERROR: "skb_pull" [drivers/media/radio/wl128x/fm_drv.ko] undefined! Making the driver dependency explicit solves randconfig build problems and makes it more obvious to the reader. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Hans Verkuil authored
>From the daily build: rtl2832.c: In function 'rtl2832_read_status': rtl2832.c:703:12: warning: 'tmp' may be used uninitialized in this function [-Wmaybe-uninitialized] } else if (tmp == 10) { ^ The code is OK, it's just the compiler that cannot figure out what's going on. So just init 'tmp' to 0. Signed-off-by: -
Julia Lawall authored
The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ type T; identifier f; @@ static T f (...) { ... } @@ identifier r.f; declarer name EXPORT_SYMBOL; @@ -EXPORT_SYMBOL(f); // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Hans Verkuil authored
The colorspace section IDs were assigned to the title instead of to the section. Some links failed because of that. Signed-off-by:
-
Hans Verkuil authored
The documentation says that the bytesperline field in v4l2_pix_format refers to the largest plane in the case of planar formats (i.e. multiple planes stores in a single buffer). For almost all planar formats the first plane is also the largest (or equal) plane, except for two formats: V4L2_PIX_FMT_NV24/NV42. For this YUV 4:4:4 format the second chroma plane is twice the size of the first luma plane. Looking at the very few drivers that support this format the bytesperline value that they report is actually that of the first plane and not that of the largest plane. Rather than fixing the drivers it makes more sense to update the documentation since it is very difficult to use the largest plane for this. You would have to check what the format is in order to know to which plane bytesperline belongs, which makes calculations much more difficult. This patch updates the documentation accordingly. Signed-off-by:
-
Ezequiel Garcia authored
I'd rather use my work mail address to get patches, so let's update it. Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Ezequiel Garcia authored
The available (i.e. not used) buffers are returned by stk1160_clear_queue(), on the stop_streaming() path. However, this is insufficient and the current buffer must be released as well. Fix it. Cc: stable@vger.kernel.org Signed-off-by:
-
Lad, Prabhakar authored
Embed video_device struct (video_dev) in channel_obj and also the Unregister path doesn't need to free the video_device structure, hence, change the video_device.release callback point to video_device_release_empty. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Lad, Prabhakar authored
Embed video_device struct (video_dev) in channel_obj and also the Unregister path doesn't need to free the video_device structure, hence, change the video_device.release callback point to video_device_release_empty. Signed-off-by:
-
Lad, Prabhakar authored
Embed video_device struct (video_dev) in bcap_device and Unregister path doesn't need to free the video_device structure, hence, change the video_device.release callback point to video_device_release_empty. Signed-off-by:
-
Lad, Prabhakar authored
this patch drops bcap_get_unmapped_area() and uses vb2_fop_get_unmapped_area() helper provided by the vb2 core. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support to set the v4l2 buffer sequence. Signed-off-by:
Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support for VIDIOC_EXPBUF. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support for VB2_DMABUF. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support for vidioc_create_bufs. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support to return -ENODATA for *dv_timings calls if the current output does not support it. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds supports to return -ENODATA to *_std calls if the selected output does not support it. Signed-off-by:
-
Lad, Prabhakar authored
[media] media: blackfin: bfin_capture: make sure all buffers are returned on stop_streaming() callback In start_streaming() callback the buffer is removed from the dma_queue list and assigned to cur_frm, this patch makes sure that is returned to vb2 core with VB2_BUF_STATE_ERROR flag. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support to vb2_ioctl_* helpers. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support to use v4l2_fh_open() and vb2_fop_release, which allows to drop driver specific struct bcap_fh, as this is handled by core. Signed-off-by:
-
Lad, Prabhakar authored
No need to reinvent the wheel. Just use the already existing functions provided by vb2. Signed-off-by:
-
Lad, Prabhakar authored
This patch does the following: a: returns -EINVAL in case format image size is less then current image size. b: assigns nbuffers to two in case the total of vq->num_buffers and nbuffers is less then the number of buffers required by driver. c: sets the sizes[0] of plane according to the fmt passed or which is being set in the device. Signed-off-by:
-
Lad, Prabhakar authored
set the vb2 buffer field in buf_prepare() callback, alongside drop local variable buf as we already have a pointer to vb2 buffer. Signed-off-by:
-
Lad, Prabhakar authored
this patch sets the min_buffers_needed field of the vb2 queue so that the vb2 core will make sure start_streaming() callback is called only when we have minimum buffers queued. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support to release the buffer by calling vb2_buffer_done(), with state marked as VB2_BUF_STATE_QUEUED if start_streaming() call back fails. Signed-off-by:
-
Lad, Prabhakar authored
this patch drops the buf_init() callback as init of buf list is not required. Signed-off-by:
-
Hans Verkuil authored
According to the standard the R'G'B' BT.2020 colorspace is limited range, not full range. Fix this. Signed-off-by:
-
Hans Verkuil authored
The quantization comment in the header was incorrect w.r.t. BT.2020. Fix this. Signed-off-by:
-
Hans Verkuil authored
In contrast to all other colorspaces, the BT.2020 colorspace uses limited range R'G'B' quantization as the default. This was incorrected documented, so fix this. Signed-off-by:
-
Hans Verkuil authored
The denominator for the scaling and offsets is 256, not 255. Fix this. Signed-off-by:
-
Hans Verkuil authored
Make sure the format fields are reported consistently. Signed-off-by:
-
Hans Verkuil authored
The debug attribute was renamed to dev_debug. Update the doc accordingly. Signed-off-by:
-
Lad, Prabhakar authored
Embed video_device struct (video_dev) in vpfe_device and Unregister path doesn't need to free the video_device structure, hence, change the video_device.release callback point to video_device_release_empty. Signed-off-by:
-
