- 02 Sep, 2016 14 commits
-
-
Kevin Barnett authored
minor tweaks to update time support Reviewed-by:
Scott Teel <scott.teel@microsemi.com> Reviewed-by:
Scott Benesh <scott.benesh@microsemi.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Kevin Barnett authored
reformatted pqi_num_elements_free() to match the rest of the driver Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Kevin Barnett authored
the driver no longer waits for the firmware to consume the event ack IU. Reviewed-by:
-
Kevin Barnett authored
Fixes: 6c223761 'smartpqi: initial commit of Microsemi smartpqi driver' Fixed a bug where the driver would not free all of the controller resources if the controller ever went offline. Reviewed-by:
-
Kevin Barnett authored
Reviewed-by:
-
Kevin Barnett authored
Eliminated timeout from LUN reset logic. Reviewed-by:
-
Kevin Barnett authored
Made a couple of error messages more verbose. Reviewed-by:
-
Kevin Barnett authored
Removed the workaround for the transition to spanning. Reviewed-by:
-
Kevin Barnett authored
small change to make code look cleaner Reviewed-by:
-
Kevin Barnett authored
Take advantage of controller improvements. Reviewed-by:
-
Bhaktipriya Shridhar authored
The workqueues "ioc->reset_work_q" and "ioc->fw_event_q" queue a single work item &ioc->fault_reset_work and &fw_event->work, respectively and hence don't require ordering. Hence, they have been converted to use alloc_workqueue(). The WQ_MEM_RECLAIM flag has been set to ensure forward progress under memory pressure since the workqueue belongs to a storage driver which is being used on a memory reclaim path. Since there are fixed number of work items, explicit concurrency limit is unnecessary here. Signed-off-by:
Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Bhaktipriya Shridhar authored
The workqueue "fc_rescan_work_q" queues multiple work items viz &ioc->fc_rescan_work, &ioc->fc_lsc_work, &ioc->fc_setup_reset_work, which require strict execution ordering. Hence, an ordered dedicated workqueue has been used. WQ_MEM_RECLAIM has been set since the workqueue is belongs to a storage driver which is being used on a memory reclaim path and hence, requires forward progress under memory pressure. Signed-off-by:
-
Colin Ian King authored
Port is deferenced before it is null sanity checked, hence we potentially have a null pointer dereference bug. Instead, initialise trl_enabled from port->fcs->bfa after we are sure port is not null. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Baoyou Xie authored
We get 1 warning when build kernel with W=1: drivers/scsi/qla4xxx/ql4_nx.c:1846:10: warning: no previous prototype for 'ql4_84xx_ipmdio_rd_reg' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. This patch marks this function with 'static'. Signed-off-by:
Baoyou Xie <baoyou.xie@linaro.org> Acked-by:
Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by:
-
- 31 Aug, 2016 11 commits
-
-
Baoyou Xie authored
We get 2 warnings about global functions without a declaration in the scsi driver when building with W=1: drivers/scsi/scsi_lib.c:467:6: warning: no previous prototype for 'scsi_requeue_run_queue' [-Wmissing-prototypes] drivers/scsi/scsi_lib.c:2609:6: warning: no previous prototype for 'scsi_evt_thread' [-Wmissing-prototypes] In fact, both functions are declared in drivers/scsi/scsi_scan.c but need to move them into scsi_priv.h. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistakes in ql_dbg messages. Signed-off-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by:
-
Finn Thain authored
With commit 3a0f64bf ("mac_scsi: Fix pseudo DMA implementation") some versions of gcc now warn: In file included from drivers/scsi/mac_scsi.c:335: drivers/scsi/NCR5380.h:295: warning: `NCR5380_poll_politely' declared inline after being called drivers/scsi/NCR5380.h:295: warning: previous declaration of `NCR5380_poll_politely' was here Avoid this by defining NCR5380_poll_politely() in NCR5380.h. [mkp: checkpatch warnings] Suggested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Tested-by:
-
Finn Thain authored
The driver that used the 'nodisconnect' parameter was removed in commit 565bae6a ("[SCSI] 53c7xx: kill driver"). Related documentation was cleaned up in commit f37a7238 ("[SCSI] 53c7xx: fix removal fallout"), except for the remaining two mentions that are removed here. Signed-off-by:
-
Wei Yongjun authored
Using list_move_tail() instead of list_del() + list_add_tail(). Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Reviewed-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
-
Jitendra Bhivare authored
Julia pointed out beiscsi_boot_get_sinfo does not unlock mbox_lock on nonemb_cmd memory allocation failure. Signed-off-by:
Jitendra Bhivare <jitendra.bhivare@broadcom.com> Reviewed-by:
-
Jitendra Bhivare authored
alloc_wrb_handle already does memset zero of iscsi_wrb descriptor so remove redundant memset in WRB submission paths. Add pwrb_handle NULL check before memsett'ing pwrb. Signed-off-by:
-
Christophe JAILLET authored
We know that 'ret' is not an error code because it has been tested a few lines above. So, if one of these function fails, 0 will be returned instead of an error code. Return -ENOMEM instead. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> 'ret' needs to be set with error code if hba_setup_cid_tbls fails. Signed-off-by:
-
Christophe JAILLET authored
The 2nd parameter of 'find_first_bit' is the number of bits to search. In this case, we are passing 'sizeof(unsigned long)' which is likely to be 4. It is likely that the number of bits in a long was expected here, so use BITS_PER_LONG instead. Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
Paul Burton authored
The MULDIV macro is essentially a duplicate of the more standard mult_frac macro. Replace use of MULDIV with mult_frac & drop the duplication. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Paul Burton authored
Calculating the maximum timeout that a user can set via the SG_SET_TIMEOUT ioctl involves multiplying INT_MAX by USER_HZ/HZ. If USER_HZ is larger than HZ then this results in an overflow when performed as a 32 bit integer calculation, resulting in compiler warnings such as the following: drivers/scsi/sg.c: In function 'sg_ioctl': drivers/scsi/sg.c:91:67: warning: integer overflow in expression [-Woverflow] #define MULDIV(X,MUL,DIV) ((((X % DIV) * MUL) / DIV) + ((X / DIV) * MUL)) ^ drivers/scsi/sg.c:887:14: note: in expansion of macro 'MULDIV' if (val >= MULDIV (INT_MAX, USER_HZ, HZ)) ^ drivers/scsi/sg.c:91:67: warning: integer overflow in expression [-Woverflow] #define MULDIV(X,MUL,DIV) ((((X % DIV) * MUL) / DIV) + ((X / DIV) * MUL)) ^ drivers/scsi/sg.c:888:13: note: in expansion of macro 'MULDIV' val = MULDIV (INT_MAX, USER_HZ, HZ); ^ Avoid this overflow by performing the (constant) arithmetic on 64 bit integers, which ensures that overflow from multiplying the 32 bit values cannot occur. When converting the result back to a 32 bit integer use min_t to ensure that we don't simply truncate a value beyond INT_MAX to a 32 bit integer, but instead use INT_MAX where the result was larger than it. As the values are all compile time constant the 64 bit arithmetic should have no runtime cost. Signed-off-by:
-
- 26 Aug, 2016 15 commits
-
-
Tyrel Datwyler authored
The ibmvfc driver currently doesn't support FC Class 3 Error Recovery. However, it is simply a matter of informing the VIOS that the payload expects to use sequence level error recovery via a bit flag in the ibmvfc_cmd structure. This patch adds a module parameter to enable error recovery support at boot time. When enabled the RETRY service parameter bit is set during PRLI, and ibmvfc_cmd->flags includes the IBMVFC_CLASS_3_ERR bit. Signed-off-by:
-
Tyrel Datwyler authored
The READ FCP_XFER_READY DISABLED bit is required to always be set to one since FCP-3. Set it in the service parameter page frame during process login. Signed-off-by:
-
Christophe JAILLET authored
It is likely that checking the result of 'pci_write_config_dword' is expected here. Signed-off-by:
-
Heiner Kallweit authored
Runtime PM should be configured already once we call device_add. See also the description in this mail thread https://lists.linuxfoundation.org/pipermail/linux-pm/2009-November/023198.html or the order of calls e.g. in usb_new_device. The changed order also helps to avoid scenarios where runtime pm for &shost->shost_gendev is activated whilst the parent is suspended, resulting in error message "runtime PM trying to activate child device hostx but parent yyy is not active". In addition properly reverse the runtime pm calls in the error path. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Brian King authored
This patch implements functions for pushing HCAM (host controlled asynchronous messages) error buffers to userspace through sysfs attributes. Reads to the "async_err_log" attribute will result in a single HCAM buffer being copied to userspace; one can process the next HCAM buffer by writing any string to the same attribute. A new list was added to the ioa_cfg structure to store the HCAM buffers for later reporting. We also send a KOBJ_CHANGE event whenever a new HCAM buffer is made available to userspace. Signed-off-by:
Heitor Ricardo Alves de Siqueira <halves@linux.vnet.ibm.com> Signed-off-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
John Garry authored
Signed-off-by:
John Garry <john.garry@huawei.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
John Garry authored
When a tmf is issued, various response codes can be returned from the target. For a query tmf the response may be TMF_RESP_FUNC_COMPLETE or TMF_RESP_FUNC_SUCC. Add a condition for TMF_RESP_FUNC_SUCC to hisi_sas_exec_internal_tmf_task(). This affects query tmf, as the result is success the returned value was for failure. Signed-off-by:
-
John Garry authored
When the port is detached we cannot execute a TMF, as there can be no device attached to the port. Signed-off-by:
-
John Garry authored
Add code in slot_complete_v2_hw() to deal with the slots which have completed due to internal abort. The status codes have the following meaning: - STAT_IO_ABORTED: the IO has been aborted due to internal abort, whether by device or individual abort command - STAT_IO_COMPLETE: internal abort command has completed successfully for device or individual abort command - STAT_IO_NO_DEVICE: internal abort command has completed for device but cannot find any IO - STAT_IO_NOT_VALID: internal abort command has completed for single command but could not find the command Signed-off-by:
-
John Garry authored
Add function to prepare the an internal abort for v2 hw. Signed-off-by:
-
John Garry authored
Execute an internal abort for executing a task abort. This is for case of the command still being present in host when abort is executed. For a SATA internal abort, we set abort for all tasks associated with the device. Signed-off-by:
-
John Garry authored
Execute an internal abort for that device when it is removed, so that commands for that device are not processed. Signed-off-by:
-
John Garry authored
Add main code for internal abort functionality. The internal abort features allows the host controller to abort commands which are still active in the controller but have not yet been sent to the slave device. Typically a command only spends a relatively short time in the controller when compared to the amount of the time after it is sent to the slave device. Two modes of internal abort are supported: - device - individual command For device, when the internal abort is issued all commands in the host for that device are aborted. For a single command, only that command is aborted if it is still in the host. In HW the internal abort command is executed similar to any other sort of command, like SSP. Signed-off-by:
-
Shawn Lin authored
req_table is allocate by kzalloc, so we don't need to zero it again. Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Acked-by:
Bradley Grove <bgrove@attotech.com> Signed-off-by:
-
Shawn Lin authored
We don't need to use kzalloc as we will always memset the local_atto_ioctl later. Signed-off-by:
-
