Pull scheduler fixes from Thomas Gleixner:
 "This scheduler update provides:

   - The (hopefully) final fix for the vtime accounting issues which
     were around for quite some time

   - Use types known to user space in UAPI headers to unbreak user space
     builds

   - Make load balancing respect the current scheduling domain again
     instead of evaluating unrelated CPUs"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/headers/uapi: Fix linux/sched/types.h userspace compilation errors
  sched/fair: Fix load_balance() affinity redo path
  sched/cputime: Accumulate vtime on top of nsec clocksource
  sched/cputime: Move the vtime task fields to their own struct
  sched/cputime: Rename vtime fields
  sched/cputime: Always set tsk->vtime_snap_whence after accounting vtime
  vtime, sched/cputime: Remove vtime_account_user()
  Revert "sched/cputime: Refactor the cputime_adjust() code"

Pull perf fixes from Thomas Gleixner:
 "A couple of fixes for perf and kprobes:

   - Add he missing exclude_kernel attribute for the precise_ip level so
     !CAP_SYS_ADMIN users get the proper results.

   - Warn instead of failing completely when perf has no unwind support
     for a particular architectiure built in.

   - Ensure that jprobes are at function entry and not at some random
     place"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kprobes: Ensure that jprobe probepoints are at function entry
  kprobes: Simplify register_jprobes()
  kprobes: Rename [arch_]function_offset_within_entry() to [arch_]kprobe_on_func_entry()
  perf unwind: Do not fail due to missing unwind support
  perf evsel: Set attr.exclude_kernel when probing max attr.precise_ip

Pull locking fixes from Thomas Gleixner:

 - Fix the EINTR logic in rwsem-spinlock to avoid double locking by a
   writer and a reader

 - Add a missing include to qspinlocks

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/qspinlock: Explicitly include asm/prefetch.h
  locking/rwsem-spinlock: Fix EINTR branch in __down_write_common()

Pull irq fixes from Thomas Gleixner:

 - A few fixes mopping up the fallout of the big irq overhaul

 - Move the interrupt resource management logic out of the spin locked,
   irq disabled region to avoid unnecessary restrictions of the resource
   callbacks

 - Preparation for reworking the per cpu irq request function.

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqdomain: Allow ACPI device nodes to be used as irqdomain identifiers
  genirq/debugfs: Remove redundant NULL pointer check
  genirq: Allow to pass the IRQF_TIMER flag with percpu irq request
  genirq/timings: Move free timings out of spinlocked region
  genirq: Move irq resource handling out of spinlocked region
  genirq: Add mutex to irq desc to serialize request/free_irq()
  genirq: Move bus locking into __setup_irq()
  genirq: Force inlining of __irq_startup_managed to prevent build failure
  genirq/debugfs: Fix build for !CONFIG_IRQ_DOMAIN

Pull objtool fix from Thomas Gleixner:
 "A fix to the objtool sibling call detection logic to distinguish
  normal jumps inside a function from a real sibling call"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix sibling call detection logic

Pull ext4 updates from Ted Ts'o:
 "The first major feature for ext4 this merge window is the largedir
  feature, which allows ext4 directories to support over 2 billion
  directory entries (assuming ~64 byte file names; in practice, users
  will run into practical performance limits first.) This feature was
  originally written by the Lustre team, and credit goes to Artem
  Blagodarenko from Seagate for getting this feature upstream.

  The second major major feature allows ext4 to support extended
  attribute values up to 64k. This feature was also originally from
  Lustre, and has been enhanced by Tahsin Erdogan from Google with a
  deduplication feature so that if multiple files have the same xattr
  value (for example, Windows ACL's stored by Samba), only one copy will
  be stored on disk for encoding and caching efficiency.

  We also have the usual set of bug fixes, cleanups, and optimizations"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (47 commits)
  ext4: fix spelling mistake: "prellocated" -> "preallocated"
  ext4: fix __ext4_new_inode() journal credits calculation
  ext4: skip ext4_init_security() and encryption on ea_inodes
  fs: generic_block_bmap(): initialize all of the fields in the temp bh
  ext4: change fast symlink test to not rely on i_blocks
  ext4: require key for truncate(2) of encrypted file
  ext4: don't bother checking for encryption key in ->mmap()
  ext4: check return value of kstrtoull correctly in reserved_clusters_store
  ext4: fix off-by-one fsmap error on 1k block filesystems
  ext4: return EFSBADCRC if a bad checksum error is found in ext4_find_entry()
  ext4: return EIO on read error in ext4_find_entry
  ext4: forbid encrypting root directory
  ext4: send parallel discards on commit completions
  ext4: avoid unnecessary stalls in ext4_evict_inode()
  ext4: add nombcache mount option
  ext4: strong binding of xattr inode references
  ext4: eliminate xattr entry e_hash recalculation for removes
  ext4: reserve space for xattr entries/names
  quota: add get_inode_usage callback to transfer multi-inode charges
  ext4: xattr inode deduplication
  ...

Pull fscrypt updates from Ted Ts'o:
 "Add support for 128-bit AES and some cleanups to fscrypt"

* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
  fscrypt: make ->dummy_context() return bool
  fscrypt: add support for AES-128-CBC
  fscrypt: inline fscrypt_free_filename()

Pull waitid fix from Al Viro.

* 'waitid-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix waitid(2) breakage

Pull PCI updates from Bjorn Helgaas:

  - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee
    Khee)

  - make host bridge IRQ mapping much more generic (Matthew Minter,
    Lorenzo Pieralisi)

  - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo
    Pieralisi)

  - mutex sriov_configure() (Jakub Kicinski)

  - mutex pci_error_handlers callbacks (Christoph Hellwig)

  - split ->reset_notify() into ->reset_prepare()/reset_done()
    (Christoph Hellwig)

  - support multiple PCIe portdrv interrupts for MSI as well as MSI-X
    (Gabriele Paoloni)

  - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele
    Paoloni)

  - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez)

  - test INTx masking during enumeration, not at run-time (Piotr Gregor)

  - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki)

  - restore the status of PCI devices across hibernation (Chen Yu)

  - keep parent resources that start at 0x0 (Ard Biesheuvel)

  - enable ECRC only if device supports it (Bjorn Helgaas)

  - restore PRI and PASID state after Function-Level Reset (CQ Tang)

  - skip DPC event if device is not present (Keith Busch)

  - check domain when matching SMBIOS info (Sujith Pandel)

  - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson)

  - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng)

  - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas)

  - add Switchtec "running" status flag (Logan Gunthorpe)

  - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav)

  - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar
    Gogada)

  - move VMD SRCU cleanup after bus, child device removal (Jon Derrick)

  - add Faraday clock handling (Linus Walleij)

  - configure Rockchip MPS and reorganize (Shawn Lin)

  - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla)

  - support Tegra MSI 64-bit addressing (Thierry Reding)

  - use Rockchip normal (not privileged) register bank (Shawn Lin)

  - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song)

  - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc
    Gonzalez)

  - add MediaTek PCIe host controller support (Ryder Lee)

  - add Qualcomm IPQ4019 support (John Crispin)

  - add HyperV vPCI protocol v1.2 support (Jork Loeser)

  - add i.MX6 regulator support (Quentin Schulz)

* tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits)
  PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support
  PCI: Add DT binding for Sigma Designs Tango PCIe controller
  PCI: rockchip: Use normal register bank for config accessors
  dt-bindings: PCI: Add documentation for MediaTek PCIe
  PCI: Remove __pci_dev_reset() and pci_dev_reset()
  PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done()
  PCI: xilinx: Make of_device_ids const
  PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts
  PCI: vmd: Move SRCU cleanup after bus, child device removal
  PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000
  PCI: versatile: Add local struct device pointers
  PCI: tegra: Do not allocate MSI target memory
  PCI: tegra: Support MSI 64-bit addressing
  PCI: rockchip: Use local struct device pointer consistently
  PCI: rockchip: Check for clk_prepare_enable() errors during resume
  MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer
  PCI: rockchip: Configure RC's MPS setting
  PCI: rockchip: Reconfigure configuration space header type
  PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses()
  PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu()
  ...

Pull MD update from Shaohua Li:

 - fixed deadlock in MD suspend and a potential bug in bio allocation
   (Neil Brown)

 - fixed signal issue (Mikulas Patocka)

 - fixed typo in FailFast test (Guoqing Jiang)

 - other trival fixes

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  MD: fix sleep in atomic
  MD: fix a null dereference
  md: use a separate bio_set for synchronous IO.
  md: change the initialization value for a spare device spot to MD_DISK_ROLE_SPARE
  md/raid1: remove unused bio in sync_request_write
  md/raid10: fix FailFast test for wrong device
  md: don't use flush_signals in userspace processes
  md: fix deadlock between mddev_suspend() and md_write_start()

Pull input updates from Dmitry Torokhov:

 - a new driver for STM FingerTip touchscreen

 - a new driver for D-Link DIR-685 touch keys

 - updated list of supported devices in xpad driver

 - other assorted updates and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (23 commits)
  MAINTAINERS: update input subsystem patterns
  Input: introduce KEY_ASSISTANT
  Input: xpad - sync supported devices with XBCD
  Input: xpad - sync supported devices with 360Controller
  Input: xen-kbdfront - use string constants from PV protocol
  Input: stmfts - mark all PM functions as __maybe_unused
  Input: add support for the STMicroelectronics FingerTip touchscreen
  Input: add D-Link DIR-685 touchkeys driver
  Input: s3c2410_ts - handle return value of clk_prepare_enable
  Input: axp20x-pek - add wakeup support
  Input: synaptics-rmi4 - use %phN to form F34 configuration ID
  Input: synaptics-rmi4 - change a char type to u8
  Input: sparse-keymap - remove sparse_keymap_free()
  Input: tsc2007 - move header file out of I2C realm
  Input: mms114 - move header file out of I2C realm
  Input: mcs - move header file out of I2C realm
  Input: lm8323 - move header file out of I2C realm
  Input: elantech - force relative mode on a certain module
  Input: elan_i2c - add support for fetching chip type on newer hardware
  Input: elan_i2c - check if device is there before really probing
  ...

Pull dmaengine updates from Vinod Koul:

 - removal of AVR32 support in dw driver as AVR32 is gone

 - new driver for Broadcom stream buffer accelerator (SBA) RAID driver

 - add support for Faraday Technology FTDMAC020 in amba-pl08x driver

 - IOMMU support in pl330 driver

 - updates to bunch of drivers

* tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits)
  dmaengine: qcom_hidma: correct API violation for submit
  dmaengine: zynqmp_dma: Remove max len check in zynqmp_dma_prep_memcpy
  dmaengine: tegra-apb: Really fix runtime-pm usage
  dmaengine: fsl_raid: make of_device_ids const.
  dmaengine: qcom_hidma: allow ACPI/DT parameters to be overridden
  dmaengine: fsldma: set BWC, DAHTS and SAHTS values correctly
  dmaengine: Kconfig: Simplify the help text for MXS_DMA
  dmaengine: pl330: Delete unused functions
  dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once()
  dmaengine: Kconfig: Extend the dependency for MXS_DMA
  dmaengine: mxs: Use %zu for printing a size_t variable
  dmaengine: ste_dma40: Cleanup scatterlist layering violations
  dmaengine: imx-dma: cleanup scatterlist layering violations
  dmaengine: use proper name for the R-Car SoC
  dmaengine: imx-sdma: Fix compilation warning.
  dmaengine: imx-sdma: Handle return value of clk_prepare_enable
  dmaengine: pl330: Add IOMMU support to slave tranfers
  dmaengine: DW DMAC: Handle return value of clk_prepare_enable
  dmaengine: pl08x: use GENMASK() to create bitmasks
  dmaengine: pl08x: Add support for Faraday Technology FTDMAC020
  ...

Pull ARM updates from Russell King:

 - add support for ftrace-with-registers, which is needed for kgraft and
   other ftrace tools

 - support for mremap() for the sigpage/vDSO so that checkpoint/restore
   can work

 - add timestamps to each line of the register dump output

 - remove the unused KTHREAD_SIZE from nommu

 - align the ARM bitops APIs with the generic API (using unsigned long
   pointers rather than void pointers)

 - make the configuration of userspace Thumb support an expert option so
   that we can default it on, and avoid some hard to debug userspace
   crashes

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8684/1: NOMMU: Remove unused KTHREAD_SIZE definition
  ARM: 8683/1: ARM32: Support mremap() for sigpage/vDSO
  ARM: 8679/1: bitops: Align prototypes to generic API
  ARM: 8678/1: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS
  ARM: make configuration of userspace Thumb support an expert option
  ARM: 8673/1: Fix __show_regs output timestamps

Pull sparc updates from David Miller:

 1) Queued spinlocks and rwlocks for sparc64, from Babu Moger.

 2) Some const'ification from Arvind Yadav.

 3) LDC/VIO driver infrastructure changes to facilitate future upcoming
    drivers, from Jag Raman.

 4) Initialize sched_clock() et al. early so that the initial printk
    timestamps are all done while the implementation is available and
    functioning. From Pavel Tatashin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: (38 commits)
  sparc: kernel: pmc: make of_device_ids const.
  sparc64: fix typo in property
  sparc64: add port_id to VIO device metadata
  sparc64: Enhance search for VIO device in MDESC
  sparc64: enhance VIO device probing
  sparc64: check if a client is allowed to register for MDESC notifications
  sparc64: remove restriction on VIO device name size
  sparc64: refactor code to obtain cfg_handle property from MDESC
  sparc64: add MDESC node name property to VIO device metadata
  sparc64: mdesc: use __GFP_REPEAT action modifier for VM allocation
  sparc64: expand MDESC interface
  sparc64: skip handshake for LDC channels in RAW mode
  sparc64: specify the device class in VIO version info. packet
  sparc64: ensure VIO operations are defined while being used
  sparc: kernel: apc: make of_device_ids const
  sparc/time: make of_device_ids const
  sparc64: broken %tick frequency on spitfire cpus
  sparc64: use prom interface to get %stick frequency
  sparc64: optimize functions that access tick
  sparc64: add hot-patched and inlined get_tick()
  ...

Pull networking fixes from David Miller:
 "Mostly fixing some light fallout from the changes that went into the
  merge window.

   1) Fix memory leaks on network namespace teardown in netfilter, from
      Liping Zhang.

   2) When comparing ipv6 nexthops, we have to take the lightweight
      tunnel state into account as well. From David Ahern.

   3) Fix socket option object length check in the new TLS code, from
      Matthias Rosenfelder.

   4) Fix memory leak in nfp driver flower support, from Jakub Kicinski.

   5) Several netlink attribute validation fixes in cfg80211, from
      Srinivas Dasari.

   6) Fix context array leak in virtio_net, from Jason Wang.

   7) SKB use after free in hns driver, from Yusheng Lin.

   8) Fix socket leak on accept() in RDS, from Sowmini Varadhan. Also
      add a WARN_ON() to sock_graft() so other protocol stacks don't
      trip over this as well"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
  net: ethernet: mediatek: remove useless code in mtk_probe()
  mpls: fix uninitialized in_label var warning in mpls_getroute
  doc: SKB_GSO_[IPIP|SIT] have been replaced
  bonding: avoid NETDEV_CHANGEMTU event when unregistering slave
  net/sock: add WARN_ON(parent->sk) in sock_graft()
  rds: tcp: use sock_create_lite() to create the accept socket
  net: hns: Fix a skb used after free bug
  net: hns: Fix a wrong op phy C45 code
  net: macb: Adding Support for Jumbo Frames up to 10240 Bytes in SAMA5D3
  net: Update networking MAINTAINERS entry.
  virtio-net: fix leaking of ctx array
  cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIES
  cfg80211: Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE
  cfg80211: Check if NAN service ID is of expected size
  cfg80211: Check if PMKID attribute is of expected size
  arcnet: com20020-pci: Fix an error handling path in 'com20020pci_probe()'
  nfp: flower: add missing clean up call to avoid memory leaks
  vrf: fix bug_on triggered by rx when destroying a vrf
  ptp: dte: Use LL suffix for 64-bit constants
  sctp: set the value of flowi6_oif to sk_bound_dev_if to make sctp_v6_get_dst to find the correct route entry.
  ...

Pull misc filesystem updates from Al Viro:
 "Assorted normal VFS / filesystems stuff..."

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  dentry name snapshots
  Make statfs properly return read-only state after emergency remount
  fs/dcache: init in_lookup_hashtable
  minix: Deinline get_block, save 2691 bytes
  fs: Reorder inode_owner_or_capable() to avoid needless
  fs: warn in case userspace lied about modprobe return

Pull spi uaccess delousing from Al Viro:
 "Getting rid of pointless __get_user() and friends in drivers/spi.

  [ the only reason it's on a separate branch is that I hoped it would
    be picked by spi folks; looks like mail asking them to grab it got
    lost and I hadn't followed up on that ]"

* 'for-spi' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  spidev: quit messing with access_ok()

Pull __copy_in_user removal from Al Viro:
 "There used to be 6 places in the entire tree calling __copy_in_user(),
  all of them bogus.

  Four got killed off in work.drm branch, this takes care of the
  remaining ones and kills the definition of that sucker"

* 'work.__copy_in_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  kill __copy_in_user()
  sanitize do_i2c_smbus_ioctl()

We lose the distinction between "found a PID" and "nothing, but that's not
an error" a bit too early in waitid().  Easily fixed, fortunately...
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Fixes: 67d7ddde ("waitid(2): leave copyout of siginfo to syscall itself")
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Remove useless local variables _match_, _soc_ and the code related.

Notice that

const struct of_device_id of_mtk_match[] = {
        { .compatible = "mediatek,mt2701-eth" },
        {},
};

So match->data is NULL.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the below warning generated by static checker:
    net/mpls/af_mpls.c:2111 mpls_getroute()
    error: uninitialized symbol 'in_label'."

Fixes: 397fc9e5 ("mpls: route get support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Those enum values don't exist anymore.

Fixes: 7e13318d ("net: define gso types for IPx over IPv4 and IPv6")
CC: Tom Herbert <tom@herbertland.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As Hongjun/Nicolas summarized in their original patch:

"
When a device changes from one netns to another, it's first unregistered,
then the netns reference is updated and the dev is registered in the new
netns. Thus, when a slave moves to another netns, it is first
unregistered. This triggers a NETDEV_UNREGISTER event which is caught by
the bonding driver. The driver calls bond_release(), which calls
dev_set_mtu() and thus triggers NETDEV_CHANGEMTU (the device is still in
the old netns).
"

This is a very special case, because the device is being unregistered
no one should still care about the NETDEV_CHANGEMTU event triggered
at this point, we can avoid broadcasting this event on this path,
and avoid touching inetdev_event()/addrconf_notify() path.

It requires to export __dev_set_mtu() to bonding driver.
Reported-by: Hongjun Li <hongjun.li@6wind.com>
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sowmini Varadhan says:

====================
rds-tcp: sock_graft() leak

Following up on the discussion at
  https://www.spinics.net/lists/netdev/msg442859.html
- make rds_tcp_accept_one() call sock_create_lite()
- add a WARN_ON() to sock_graft()

Tested by running an infinite while() loop that does
(module-load; rds-stress; module-unload) and monitors
TCP slabinfo while the test is running.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

sock_graft() unilaterally sets up parent->sk based on the
assumption that the existing parent->sk is null. If this
condition is not true, then the existing parent->sk would
be leaked, so add a WARN_ON() to alert callers who may fall
in this category.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two problems with calling sock_create_kern() from
rds_tcp_accept_one()
1. it sets up a new_sock->sk that is wasteful, because this ->sk
   is going to get replaced by inet_accept() in the subsequent ->accept()
2. The new_sock->sk is a leaked reference in sock_graft() which
   expects to find a null parent->sk

Avoid these problems by calling sock_create_lite().
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Lin Yun Sheng says:

====================
Bugfixs for hns ethernet driver

This patchset fix skb used after free and C45 op code issues
in hns driver.

Patch V2:
	1. Remove ndev->feature checking in TX description patch.
	2. Add Fixes: Tag in patch description.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

skb maybe freed in hns_nic_net_xmit_hw() and return NETDEV_TX_OK,
which cause hns_nic_net_xmit to use a freed skb.

BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x62c/0x940...
	[17659.112635]      alloc_debug_processing+0x18c/0x1a0
	[17659.117208]      __slab_alloc+0x52c/0x560
	[17659.120909]      kmem_cache_alloc_node+0xac/0x2c0
	[17659.125309]      __alloc_skb+0x6c/0x260
	[17659.128837]      tcp_send_ack+0x8c/0x280
	[17659.132449]      __tcp_ack_snd_check+0x9c/0xf0
	[17659.136587]      tcp_rcv_established+0x5a4/0xa70
	[17659.140899]      tcp_v4_do_rcv+0x27c/0x620
	[17659.144687]      tcp_prequeue_process+0x108/0x170
	[17659.149085]      tcp_recvmsg+0x940/0x1020
	[17659.152787]      inet_recvmsg+0x124/0x180
	[17659.156488]      sock_recvmsg+0x64/0x80
	[17659.160012]      SyS_recvfrom+0xd8/0x180
	[17659.163626]      __sys_trace_return+0x0/0x4
	[17659.167506] INFO: Freed in kfree_skbmem+0xa0/0xb0 age=23 cpu=1 pid=13
	[17659.174000]      free_debug_processing+0x1d4/0x2c0
	[17659.178486]      __slab_free+0x240/0x390
	[17659.182100]      kmem_cache_free+0x24c/0x270
	[17659.186062]      kfree_skbmem+0xa0/0xb0
	[17659.189587]      __kfree_skb+0x28/0x40
	[17659.193025]      napi_gro_receive+0x168/0x1c0
	[17659.197074]      hns_nic_rx_up_pro+0x58/0x90
	[17659.201038]      hns_nic_rx_poll_one+0x518/0xbc0
	[17659.205352]      hns_nic_common_poll+0x94/0x140
	[17659.209576]      net_rx_action+0x458/0x5e0
	[17659.213363]      __do_softirq+0x1b8/0x480
	[17659.217062]      run_ksoftirqd+0x64/0x80
	[17659.220679]      smpboot_thread_fn+0x224/0x310
	[17659.224821]      kthread+0x150/0x170
	[17659.228084]      ret_from_fork+0x10/0x40

	BUG: KASAN: use-after-free in hns_nic_net_xmit+0x8c/0xc0...
	[17751.080490]      __slab_alloc+0x52c/0x560
	[17751.084188]      kmem_cache_alloc+0x244/0x280
	[17751.088238]      __build_skb+0x40/0x150
	[17751.091764]      build_skb+0x28/0x100
	[17751.095115]      __alloc_rx_skb+0x94/0x150
	[17751.098900]      __napi_alloc_skb+0x34/0x90
	[17751.102776]      hns_nic_rx_poll_one+0x180/0xbc0
	[17751.107097]      hns_nic_common_poll+0x94/0x140
	[17751.111333]      net_rx_action+0x458/0x5e0
	[17751.115123]      __do_softirq+0x1b8/0x480
	[17751.118823]      run_ksoftirqd+0x64/0x80
	[17751.122437]      smpboot_thread_fn+0x224/0x310
	[17751.126575]      kthread+0x150/0x170
	[17751.129838]      ret_from_fork+0x10/0x40
	[17751.133454] INFO: Freed in kfree_skbmem+0xa0/0xb0 age=19 cpu=7 pid=43
	[17751.139951]      free_debug_processing+0x1d4/0x2c0
	[17751.144436]      __slab_free+0x240/0x390
	[17751.148051]      kmem_cache_free+0x24c/0x270
	[17751.152014]      kfree_skbmem+0xa0/0xb0
	[17751.155543]      __kfree_skb+0x28/0x40
	[17751.159022]      napi_gro_receive+0x168/0x1c0
	[17751.163074]      hns_nic_rx_up_pro+0x58/0x90
	[17751.167041]      hns_nic_rx_poll_one+0x518/0xbc0
	[17751.171358]      hns_nic_common_poll+0x94/0x140
	[17751.175585]      net_rx_action+0x458/0x5e0
	[17751.179373]      __do_softirq+0x1b8/0x480
	[17751.183076]      run_ksoftirqd+0x64/0x80
	[17751.186691]      smpboot_thread_fn+0x224/0x310
	[17751.190826]      kthread+0x150/0x170
	[17751.194093]      ret_from_fork+0x10/0x40

Fixes: 13ac695e ("net:hns: Add support of Hip06 SoC to the Hislicon Network Subsystem")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Reported-by: Jun He <hjat2005@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As the user manual described, the second step to write to C45 phy
by mdio should be data, but not address. Here we should fix this
issue.

Fixes: 5b904d39 ("net: add Hisilicon Network Subsystem MDIO support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As per the SAMA5D3 device specification it supports Jumbo frames.
But the suggested flag and length of bytes it supports was not updated
in this driver config_structure.
The maximum jumbo frames the device supports :
10240 bytes as per the device spec.

While changing the MTU value greater than 1500, it threw error:
sudo ifconfig eth1 mtu 9000
SIOCSIFMTU: Invalid argument

Add this support to driver so that it works as expected and designed.
Signed-off-by: vishnuvardhan <vardhanraj4143@gmail.com>
[nicolas.ferre@microchip.com: modify slightly commit msg]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Consistently use types provided by <linux/types.h> to fix the following
linux/sched/types.h userspace compilation errors:

  /usr/include/linux/sched/types.h:57:2: error: unknown type name 'u32'
    u32 size;
  ...
  u64 sched_period;
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # v4.12
Fixes: e2d1e2ae ("sched/headers: Move various ABI definitions to <uapi/linux/sched/types.h>")
Link: http://lkml.kernel.org/r/20170705162328.GA11026@altlinux.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Similar to commit 90ec5e89 ("kretprobes: Ensure probe location is
at function entry"), ensure that the jprobe probepoint is at function
entry.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a4525af6c5a42df385efa31251246cf7cca73598.1499443367.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Re-factor jprobe registration functions as the current version is
getting too unwieldy. Move the actual jprobe registration to
register_jprobe() and re-organize code accordingly.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/089cae4bfe73767f765291ee0e6fb0c3d240e5f1.1499443367.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Rename function_offset_within_entry() to scope it to kprobe namespace by
using kprobe_ prefix, and to also simplify it.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/3aa6c7e2e4fb6e00f3c24fa306496a66edb558ea.1499443367.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

In architectures that use qspinlock, like x86, prefetch is loaded
indirectly via the asm/qspinlock.h include.  On other architectures, like
OpenRISC, which may want to use asm-generic/qspinlock.h the built will
fail without the asm/prefetch.h include.

Fix this by including directly.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170707195658.23840-1-shorne@gmail.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

With some configs, objtool reports the following warning:

  arch/x86/kernel/ftrace.o: warning: objtool: ftrace_modify_code_direct()+0x2d: sibling call from callable instruction with modified stack frame

The instruction it's complaining about isn't actually a sibling call.
It's just a normal jump to an address inside the function.  Objtool
thought it was a sibling call because the instruction's jump_dest wasn't
initialized because the function was supposed to be ignored due to its
use of sync_core().

Objtool ended up validating the function instead of ignoring it because
it didn't properly recognize a sibling call to the function.  So fix the
sibling call logic.  Also add a warning to catch ignored functions being
validated so we'll get a more useful error message next time.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/96cc8ecbcdd8cb29ddd783817b4af918a6a171b0.1499437107.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull read/write fix from Al Viro:
 "file_start_write()/file_end_write() got mixed into vfs_iter_write() by
  accident; that's a deadlock for all existing callers - they already do
  that, some - quite a bit outside.

  Easily fixed, fortunately"

* 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  move file_{start,end}_write() out of do_iter_write()

Pull iov_iter hardening from Al Viro:
 "This is the iov_iter/uaccess/hardening pile.

  For one thing, it trims the inline part of copy_to_user/copy_from_user
  to the minimum that *does* need to be inlined - object size checks,
  basically. For another, it sanitizes the checks for iov_iter
  primitives. There are 4 groups of checks: access_ok(), might_fault(),
  object size and KASAN.

   - access_ok() had been verified by whoever had set the iov_iter up.
     However, that has happened in a function far away, so proving that
     there's no path to actual copying bypassing those checks is hard
     and proving that iov_iter has not been buggered in the meanwhile is
     also not pleasant. So we want those redone in actual
     copyin/copyout.

   - might_fault() is better off consolidated - we know whether it needs
     to be checked as soon as we enter iov_iter primitive and observe
     the iov_iter flavour. No need to wait until the copyin/copyout. The
     call chains are short enough to make sure we won't miss anything -
     in fact, it's more robust that way, since there are cases where we
     do e.g. forced fault-in before getting to copyin/copyout. It's not
     quite what we need to check (in particular, combination of
     iovec-backed and set_fs(KERNEL_DS) is almost certainly a bug, not a
     cause to skip checks), but that's for later series. For now let's
     keep might_fault().

   - KASAN checks belong in copyin/copyout - at the same level where
     other iov_iter flavours would've hit them in memcpy().

   - object size checks should apply to *all* iov_iter flavours, not
     just iovec-backed ones.

  There are two groups of primitives - one gets the kernel object
  described as pointer + size (copy_to_iter(), etc.) while another gets
  it as page + offset + size (copy_page_to_iter(), etc.)

  For the first group the checks are best done where we actually have a
  chance to find the object size. In other words, those belong in inline
  wrappers in uio.h, before calling into iov_iter.c. Same kind as we
  have for inlined part of copy_to_user().

  For the second group there is no object to look at - offset in page is
  just a number, it bears no type information. So we do them in the
  common helper called by iov_iter.c primitives of that kind. All it
  currently does is checking that we are not trying to access outside of
  the compound page; eventually we might want to add some sanity checks
  on the page involved.

  So the things we need in copyin/copyout part of iov_iter.c do not
  quite match anything in uaccess.h (we want no zeroing, we *do* want
  access_ok() and KASAN and we want no might_fault() or object size
  checks done on that level). OTOH, these needs are simple enough to
  provide a couple of helpers (static in iov_iter.c) doing just what we
  need..."

* 'uaccess-work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  iov_iter: saner checks on copyin/copyout
  iov_iter: sanity checks for copy to/from page primitives
  iov_iter/hardening: move object size checks to inlined part
  copy_{to,from}_user(): consolidate object size checks
  copy_{from,to}_user(): move kasan checks and might_fault() out-of-line

To avoid pathological stack usage or the need to special-case setuid
execs, just limit all arg stack usage to at most 75% of _STK_LIM (6MB).
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull Writeback error handling updates from Jeff Layton:
 "This pile represents the bulk of the writeback error handling fixes
  that I have for this cycle. Some of the earlier patches in this pile
  may look trivial but they are prerequisites for later patches in the
  series.

  The aim of this set is to improve how we track and report writeback
  errors to userland. Most applications that care about data integrity
  will periodically call fsync/fdatasync/msync to ensure that their
  writes have made it to the backing store.

  For a very long time, we have tracked writeback errors using two flags
  in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
  writeback error occurs (via mapping_set_error) and are cleared as a
  side-effect of filemap_check_errors (as you noted yesterday). This
  model really sucks for userland.

  Only the first task to call fsync (or msync or fdatasync) will see the
  error. Any subsequent task calling fsync on a file will get back 0
  (unless another writeback error occurs in the interim). If I have
  several tasks writing to a file and calling fsync to ensure that their
  writes got stored, then I need to have them coordinate with one
  another. That's difficult enough, but in a world of containerized
  setups that coordination may even not be possible.

  But wait...it gets worse!

  The calls to filemap_check_errors can be buried pretty far down in the
  call stack, and there are internal callers of filemap_write_and_wait
  and the like that also end up clearing those errors. Many of those
  callers ignore the error return from that function or return it to
  userland at nonsensical times (e.g. truncate() or stat()). If I get
  back -EIO on a truncate, there is no reason to think that it was
  because some previous writeback failed, and a subsequent fsync() will
  (incorrectly) return 0.

  This pile aims to do three things:

   1) ensure that when a writeback error occurs that that error will be
      reported to userland on a subsequent fsync/fdatasync/msync call,
      regardless of what internal callers are doing

   2) report writeback errors on all file descriptions that were open at
      the time that the error occurred. This is a user-visible change,
      but I think most applications are written to assume this behavior
      anyway. Those that aren't are unlikely to be hurt by it.

   3) document what filesystems should do when there is a writeback
      error. Today, there is very little consistency between them, and a
      lot of cargo-cult copying. We need to make it very clear what
      filesystems should do in this situation.

  To achieve this, the set adds a new data type (errseq_t) and then
  builds new writeback error tracking infrastructure around that. Once
  all of that is in place, we change the filesystems to use the new
  infrastructure for reporting wb errors to userland.

  Note that this is just the initial foray into cleaning up this mess.
  There is a lot of work remaining here:

   1) convert the rest of the filesystems in a similar fashion. Once the
      initial set is in, then I think most other fs' will be fairly
      simple to convert. Hopefully most of those can in via individual
      filesystem trees.

   2) convert internal waiters on writeback to use errseq_t for
      detecting errors instead of relying on the AS_* flags. I have some
      draft patches for this for ext4, but they are not quite ready for
      prime time yet.

  This was a discussion topic this year at LSF/MM too. If you're
  interested in the gory details, LWN has some good articles about this:

      https://lwn.net/Articles/718734/
      https://lwn.net/Articles/724307/"

* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  btrfs: minimal conversion to errseq_t writeback error reporting on fsync
  xfs: minimal conversion to errseq_t writeback error reporting
  ext4: use errseq_t based error handling for reporting data writeback errors
  fs: convert __generic_file_fsync to use errseq_t based reporting
  block: convert to errseq_t based writeback error tracking
  dax: set errors in mapping when writeback fails
  Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
  mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
  fs: new infrastructure for writeback error handling and reporting
  lib: add errseq_t type and infrastructure for handling it
  mm: don't TestClearPageError in __filemap_fdatawait_range
  mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
  jbd2: don't clear and reset errors after waiting on writeback
  buffer: set errors in mapping at the time that the error occurs
  fs: check for writeback errors after syncing out buffers in generic_file_fsync
  buffer: use mapping_set_error instead of setting the flag
  mm: fix mapping_set_error call in me_pagecache_dirty