ECN signals currently forces TCP to enter quickack mode for
up to 16 (TCP_MAX_QUICKACKS) following incoming packets.

We believe this is not needed, and only sending one immediate ack
for the current packet should be enough.

This should reduce the extra load noticed in DCTCP environments,
after congestion events.

This is part 2 of our effort to reduce pure ACK packets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We want to add finer control of the number of ACK packets sent after
ECN events.

This patch is not changing current behavior, it only enables following
change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Initial net_device implementation used ingress_lock spinlock to synchronize
ingress path of device. This lock was used in both process and bh context.
In some code paths action map lock was obtained while holding ingress_lock.
Commit e1e992e5 ("[NET_SCHED] protect action config/dump from irqs")
modified actions to always disable bh, while using action map lock, in
order to prevent deadlock on ingress_lock in softirq. This lock was removed
from net_device, so disabling bh, while accessing action map, is no longer
necessary.

Replace all action idr spinlock usage with regular calls that do not
disable bh.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern says:

====================
net/ipv6: Fix route append and replace use cases

This patch set fixes a few append and replace uses cases for IPv6 and
adds test cases that codifies the expectations of how append and replace
are expected to work. In paricular it allows a multipath route to have
a dev-only nexthop, something Thomas tried to accomplish with commit
edd7ceb7 ("ipv6: Allow non-gateway ECMP for IPv6") which had to be
reverted because of breakage, and to replace an existing FIB entry
with a reject route.

There are a number of inconsistent and surprising aspects to the Linux
API for adding, deleting, replacing and changing FIB entries. For example,
with IPv4 NLM_F_APPEND means insert the route after any existing entries
with the same key (prefix + priority + TOS for IPv4) and NLM_F_CREATE
without the append flag inserts the new route before any existing entries.

IPv6 on the other hand attempts to guess whether a new route should be
appended to an existing one, possibly creating a multipath route, or to
add a new entry after any existing ones. This applies to both the 'append'
(NLM_F_CREATE + NLM_F_APPEND) and 'prepend' (NLM_F_CREATE only) cases
meaning for IPv6 the NLM_F_APPEND is basically ignored. This guessing
whether the route should be added to a multipath route (gateway routes)
or inserted after existing entries (non-gateway based routes) means a
multipath route can not have a dev only nexthop (potentially required in
some cases - tunnels or VRF route leaking for example) and route 'replace'
is a bit adhoc treating gateway based routes and dev-only / reject routes
differently.

This has led to frustration with developers working on routing suites
such as FRR where workarounds such as delete and add are used instead of
replace.

After this patch set there are 2 differences between IPv4 and IPv6:
1. 'ip ro prepend' = NLM_F_CREATE only
    IPv4 adds the new route before any existing ones
    IPv6 adds new route after any existing ones

2. 'ip ro append' = NLM_F_CREATE|NLM_F_APPEND
   IPv4 adds the new route after any existing ones
   IPv6 adds the nexthop to existing routes converting to multipath

For the former, there are cases where we want same prefix routes added
after existing ones (e.g., multicast, prefix routes for macvlan when used
for virtual router redundancy). Requiring the APPEND flag to add a new
route to an existing one helps here but is a slight change in behavior
since prepend with gateway routes now create a separate entry.

For the latter IPv6 behavior is preferred - appending a route for the same
prefix and metric to make a multipath route, so really IPv4 not allowing an
existing route to be updated is the limiter. This will be fixed when
nexthops become separate objects - a future patch set.

Thank you to Thomas and Ido for testing earlier versions of this set, and
to Ido for providing an update to the mlxsw driver.

Changes since RFC
- cleanup wording in test script; add comments about expected failures
  and why
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add IPv4 route tests covering add, append and replace permutations.
Assumes the ability to add a basic single path route works; this is
required for example when adding an address to an interface.

$ fib_tests.sh -t ipv4_rt

IPv4 route add / append tests
    TEST: Attempt to add duplicate route - gw                           [ OK ]
    TEST: Attempt to add duplicate route - dev only                     [ OK ]
    TEST: Attempt to add duplicate route - reject route                 [ OK ]
    TEST: Add new nexthop for existing prefix                           [ OK ]
    TEST: Append nexthop to existing route - gw                         [ OK ]
    TEST: Append nexthop to existing route - dev only                   [ OK ]
    TEST: Append nexthop to existing route - reject route               [ OK ]
    TEST: Append nexthop to existing reject route - gw                  [ OK ]
    TEST: Append nexthop to existing reject route - dev only            [ OK ]
    TEST: add multipath route                                           [ OK ]
    TEST: Attempt to add duplicate multipath route                      [ OK ]
    TEST: Route add with different metrics                              [ OK ]
    TEST: Route delete with metric                                      [ OK ]

IPv4 route replace tests
    TEST: Single path with single path                                  [ OK ]
    TEST: Single path with multipath                                    [ OK ]
    TEST: Single path with reject route                                 [ OK ]
    TEST: Single path with single path via multipath attribute          [ OK ]
    TEST: Invalid nexthop                                               [ OK ]
    TEST: Single path - replace of non-existent route                   [ OK ]
    TEST: Multipath with multipath                                      [ OK ]
    TEST: Multipath with single path                                    [ OK ]
    TEST: Multipath with single path via multipath attribute            [ OK ]
    TEST: Multipath with reject route                                   [ OK ]
    TEST: Multipath - invalid first nexthop                             [ OK ]
    TEST: Multipath - invalid second nexthop                            [ OK ]
    TEST: Multipath - replace of non-existent route                     [ OK ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add IPv6 route tests covering add, append and replace permutations.
Assumes the ability to add a basic single path route works; this is
required for example when adding an address to an interface.

$ fib_tests.sh -t ipv6_rt

IPv6 route add / append tests
    TEST: Attempt to add duplicate route - gw                           [ OK ]
    TEST: Attempt to add duplicate route - dev only                     [ OK ]
    TEST: Attempt to add duplicate route - reject route                 [ OK ]
    TEST: Add new route for existing prefix (w/o NLM_F_EXCL)            [ OK ]
    TEST: Append nexthop to existing route - gw                         [ OK ]
    TEST: Append nexthop to existing route - dev only                   [ OK ]
    TEST: Append nexthop to existing route - reject route               [ OK ]
    TEST: Append nexthop to existing reject route - gw                  [ OK ]
    TEST: Append nexthop to existing reject route - dev only            [ OK ]
    TEST: Add multipath route                                           [ OK ]
    TEST: Attempt to add duplicate multipath route                      [ OK ]
    TEST: Route add with different metrics                              [ OK ]
    TEST: Route delete with metric                                      [ OK ]

IPv6 route replace tests
    TEST: Single path with single path                                  [ OK ]
    TEST: Single path with multipath                                    [ OK ]
    TEST: Single path with reject route                                 [ OK ]
    TEST: Single path with single path via multipath attribute          [ OK ]
    TEST: Invalid nexthop                                               [ OK ]
    TEST: Single path - replace of non-existent route                   [ OK ]
    TEST: Multipath with multipath                                      [ OK ]
    TEST: Multipath with single path                                    [ OK ]
    TEST: Multipath with single path via multipath attribute            [ OK ]
    TEST: Multipath with reject route                                   [ OK ]
    TEST: Multipath - invalid first nexthop                             [ OK ]
    TEST: Multipath - invalid second nexthop                            [ OK ]
    TEST: Multipath - replace of non-existent route                     [ OK ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add option to pause after each test before cleanup is done. Allows
user to do manual inspection or more ad-hoc testing after each test
with the setup in tact.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add command line options for controlling pause on fail, controlling
specific tests to run and verbose mode rather than relying on environment
variables.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As more tests are added, it is convenient to have a tally at the end.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bring consistency to ipv6 route replace and append semantics.

Remove rt6_qualify_for_ecmp which is just guess work. It fails in 2 cases:
1. can not replace a route with a reject route. Existing code appends
   a new route instead of replacing the existing one.

2. can not have a multipath route where a leg uses a dev only nexthop

Existing use cases affected by this change:
1. adding a route with existing prefix and metric using NLM_F_CREATE
   without NLM_F_APPEND or NLM_F_EXCL (ie., what iproute2 calls
   'prepend'). Existing code auto-determines that the new nexthop can
   be appended to an existing route to create a multipath route. This
   change breaks that by requiring the APPEND flag for the new route
   to be added to an existing one. Instead the prepend just adds another
   route entry.

2. route replace. Existing code replaces first matching multipath route
   if new route is multipath capable and fallback to first matching
   non-ECMP route (reject or dev only route) in case one isn't available.
   New behavior replaces first matching route. (Thanks to Ido for spotting
   this one)

Note: Newer iproute2 is needed to display multipath routes with a dev-only
      nexthop. This is due to a bug in iproute2 and parsing nexthops.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Handle append for gateway based routes. Dev-only multipath routes will
be handled by a follow on patch.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
TI Ethernet driver warnings fixes

This patch series attempts to fix properly the warnings observed with turning
on COMPILE_TEST and TI Ethernet drivers on 64-bit hosts.

Since I don't have any of this hardware, please review carefully for possible
breakage!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we can compile test this driver on 64-bit hosts, we get some
warnings about how a pointer/address is written/read to/from a register
(sw_token). Fix this by doing the appropriate conversions, we cannot
possibly have the driver work on 64-bit hosts the way the tokens are
managed though, since the registers being written to a 32-bit only.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use %pa which is the correct formatter to print a physical address,
instead of %p which is just a pointer.

Fixes: a6286ee6 ("net: Add TI DaVinci EMAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When building on a 64-bit host we will get the following warning:

drivers/net/ethernet/ti/cpsw.c: In function 'cpsw_add_ch_strings':
drivers/net/ethernet/ti/cpsw.c:1284:19: warning: format '%d' expects
argument of type 'int', but argument 5 has type 'long unsigned int'
[-Wformat=]
     "%s DMA chan %d: %s", rx_dir ? "Rx" : "Tx",
                  ~^
                  %ld

Fix this by using an %ld format and casting to long.

Fixes: e05107e6 ("net: ethernet: ti: cpsw: add multi queue support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On 64-bit hosts we will get the following warning:

drivers/net/ethernet/ti/cpts.c: In function 'cpts_overflow_check':
drivers/net/ethernet/ti/cpts.c:297:11: warning: format '%lld' expects
argument of type 'long long int', but argument 3 has type
'__kernel_time_t {aka long int}' [-Wformat=]
  pr_debug("cpts overflow check at %lld.%09lu\n", ts.tv_sec,
ts.tv_nsec);

Fix this by using an appropriate casting that works on all bit sizes.

Fixes: a5c79c26 ("ptp: cpts: convert to the 64 bit get/set time methods.")
Fixes: 87c0e764 ("cpts: introduce time stamping code and a PTP hardware clock.")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we can compile davinci_cpdma.c on 64-bit hosts, we can see that
the format used for printing a size_t type is incorrect, use %zd
accordingly.

Fixes: aeec3021 ("net: ethernet: ti: cpdma: remove used_desc counter")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.

TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.

The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.

Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix below build warning:

WARNING: vmlinux.o(.text+0x422bb8): Section mismatch in reference from
the function vmcore_add_device_dump() to the function
.init.text:get_vmcore_size.constprop.5()

The function vmcore_add_device_dump() references
the function __init get_vmcore_size.constprop.5().
This is often because vmcore_add_device_dump lacks a __init
annotation or the annotation of get_vmcore_size.constprop.5 is wrong.

Fixes: 7efe48df ("vmcore: append device dumps to vmcore as elf notes")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

immdlen field of FW_ETH_TX_PKT_WR is filled in a wrong way,
we must copy the length of all the cpls encapsulated in fw
work request. In the xmit path we missed adding the length
of CPL_TX_PKT_CORE but we added the length of WR_HDR and it
worked because WR_HDR and CPL_TX_PKT_CORE are of same length.
Add the length of cpl_tx_pkt_core not WR_HDR's. This also
fixes the lso cpl errors for udp tunnels

Fixes: d0a1299c ("cxgb4: add support for vxlan segmentation offload")
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A number of entries were not alphabetically sorted, remedy that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

If CONFIG_GPIOLIB is disabled, gpiod_put() becomes a stub that produces a
warning, this helped identify that we could be attempting to release a NULL
pl->link_gpio GPIO descriptor, so guard against that.

Fixes: daab3349 ("net: phy: phylink: Release link GPIO")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MIPS fixes from James Hogan:

 - fix build with DEBUG_ZBOOT and MACH_JZ4770 (4.16)

 - include xilfpga FDT in fitImage and stop generating dtb.o (4.15)

 - fix software IO coherence on CM SMP systems (4.8)

 - ptrace: Fix PEEKUSR/POKEUSR to o32 FGRs (3.14)

 - ptrace: Expose FIR register through FP regset (3.13)

 - fix typo in KVM debugfs file name (3.10)

* tag 'mips_fixes_4.17_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
  MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs
  MIPS: xilfpga: Actually include FDT in fitImage
  MIPS: xilfpga: Stop generating useless dtb.o
  KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable"
  MIPS: ptrace: Expose FIR register through FP regset
  MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4770
  MIPS: c-r4k: Fix data corruption related to cache coherence

Pull networking fixes from David Miller:

 1) Fix refcounting bug for connections in on-packet scheduling mode of
    IPVS, from Julian Anastasov.

 2) Set network header properly in AF_PACKET's packet_snd, from Willem
    de Bruijn.

 3) Fix regressions in 3c59x by converting to generic DMA API. It was
    relying upon the hack that the PCI DMA interfaces would accept NULL
    for EISA devices. From Christoph Hellwig.

 4) Remove RDMA devices before unregistering netdev in QEDE driver, from
    Michal Kalderon.

 5) Use after free in TUN driver ptr_ring usage, from Jason Wang.

 6) Properly check for missing netlink attributes in SMC_PNETID
    requests, from Eric Biggers.

 7) Set DMA mask before performaing any DMA operations in vmxnet3
    driver, from Regis Duchesne.

 8) Fix mlx5 build with SMP=n, from Saeed Mahameed.

 9) Classifier fixes in bcm_sf2 driver from Florian Fainelli.

10) Tuntap use after free during release, from Jason Wang.

11) Don't use stack memory in scatterlists in tls code, from Matt
    Mullins.

12) Not fully initialized flow key object in ipv4 routing code, from
    David Ahern.

13) Various packet headroom bug fixes in ip6_gre driver, from Petr
    Machata.

14) Remove queues from XPS maps using correct index, from Amritha
    Nambiar.

15) Fix use after free in sock_diag, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits)
  net: ip6_gre: fix tunnel metadata device sharing.
  cxgb4: fix offset in collecting TX rate limit info
  net: sched: red: avoid hashing NULL child
  sock_diag: fix use-after-free read in __sk_free
  sh_eth: Change platform check to CONFIG_ARCH_RENESAS
  net: dsa: Do not register devlink for unused ports
  net: Fix a bug in removing queues from XPS map
  bpf: fix truncated jump targets on heavy expansions
  bpf: parse and verdict prog attach may race with bpf map update
  bpf: sockmap update rollback on error can incorrectly dec prog refcnt
  net: test tailroom before appending to linear skb
  net: ip6_gre: Fix ip6erspan hlen calculation
  net: ip6_gre: Split up ip6gre_changelink()
  net: ip6_gre: Split up ip6gre_newlink()
  net: ip6_gre: Split up ip6gre_tnl_change()
  net: ip6_gre: Split up ip6gre_tnl_link_config()
  net: ip6_gre: Fix headroom request in ip6erspan_tunnel_xmit()
  net: ip6_gre: Request headroom in __gre6_xmit()
  selftests/bpf: check return value of fopen in test_verifier.c
  erspan: fix invalid erspan version.
  ...

In mv88e6xxx_probe(), ("np" or "pdata") might be an invariant
but GCC can't see that, therefore:

drivers/net/dsa/mv88e6xxx/chip.c: In function ‘mv88e6xxx_probe’:
drivers/net/dsa/mv88e6xxx/chip.c:4420:13: warning: ‘compat_info’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  chip->info = compat_info;

Actually, it should have warned on the "if (!compat_info)" test, but
whatever.

Explicitly initialize to NULL in the variable declaration to
deal with this.

Fixes: 877b7cb0 ("net: dsa: mv88e6xxx: Add minimal platform_data support")
Signed-off-by: David S. Miller <davem@davemloft.net>

The b53 driver already defines and internally uses platform data to let the
glue drivers specify parameters such as the chip id.  What we were missing was
a way to tell the core DSA layer about the ports and their type.

Place a dsa_chip_data structure at the beginning of b53_platform_data for
dsa_register_switch() to access it. This does not require modifications to
b53_common.c which will pass platform_data trough.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
Platform data support for mv88exxx

There are a few Intel based platforms making use of the mv88exxx.
These don't easily have access to device tree in order to instantiate
the switch driver. These patches allow the use of platform data to
hold the configuration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the size of the EEPROM to the platform data, so it can also be
instantiated by a platform device.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Not all the world uses device tree. Some parts of the world still use
platform devices and platform data. Add basic support for probing a
Marvell switch via platform data.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An IRQ domain will work without an OF node. It is not possible to
reference interrupts via a phandle, but C code can still use
irq_find_mapping() to get an interrupt from the domain.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sergei Shtylyov says:

====================
sh_eth: fix typos/grammar

Here's a set of 3 patches against DaveM's 'net-next.git' repo plus the R8A77980
support patches posted earlier. They fix the comments typos/grammar and another
typo in the EESR bit...
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon has noticed a typo in the comment accompaining the BCULR write --
fix it and move the comment before the write (following the style of
the other comments), while at it...
Reported-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All the verbs in the comments to the 'struct sh_eth_cpu_data' declaration
should  be in a  3rd person singular, to match the nouns.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The  correct name of the EESR bit 8 is TRO (transmit retry over), not RTO.
Note that EESIPR bit 8, TROIP remained correct...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Salil Mehta says:

====================
Misc. bug fixes and cleanup for HNS3 driver

This patch-set presents miscellaneous bug fixes and cleanups found
during internal review, system testing and cleanup.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When vf module is loading, the cmd queue initialization should
happen before misc interrupt initialization, otherwise the misc
interrupt handle will cause using uninitialized cmd queue problem.
There is also the same issue when vf module is unloading.

This patch fixes it by adjusting the location of some function.

Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If CONFIG_ARM_SMMU_V3 is enabled, arm64's dma_ops will replace
arm64_swiotlb_dma_ops with iommu_dma_ops. When releasing contiguous
dma memory, the new ops will call the vunmap function which cannot
be run in interrupt context.

Currently, spin_lock_bh is called before vunmap is executed. This
disables BH and causes the interrupt context to be detected to
generate a kernel panic like below:

[ 2831.573400] kernel BUG at mm/vmalloc.c:1621!
[ 2831.577659] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
...
[ 2831.699907] Process rmmod (pid: 1893, stack limit = 0x0000000055103ee2)
[ 2831.706507] Call trace:
[ 2831.708941]  vunmap+0x48/0x50
[ 2831.711897]  dma_common_free_remap+0x78/0x88
[ 2831.716155]  __iommu_free_attrs+0xa8/0x1c0
[ 2831.720255]  hclge_free_cmd_desc+0xc8/0x118 [hclge]
[ 2831.725128]  hclge_destroy_cmd_queue+0x34/0x68 [hclge]
[ 2831.730261]  hclge_uninit_ae_dev+0x90/0x100 [hclge]
[ 2831.735127]  hnae3_unregister_ae_dev+0xb0/0x868 [hnae3]
[ 2831.740345]  hns3_remove+0x3c/0x90 [hns3]
[ 2831.744344]  pci_device_remove+0x48/0x108
[ 2831.748342]  device_release_driver_internal+0x164/0x200
[ 2831.753553]  driver_detach+0x4c/0x88
[ 2831.757116]  bus_remove_driver+0x60/0xc0
[ 2831.761026]  driver_unregister+0x34/0x60
[ 2831.764935]  pci_unregister_driver+0x30/0xb0
[ 2831.769197]  hns3_exit_module+0x10/0x978 [hns3]
[ 2831.773715]  SyS_delete_module+0x1f8/0x248
[ 2831.777799]  el0_svc_naked+0x30/0x34

This patch fixes it by using spin_lock instead of spin_lock_bh.

Fixes: 68c0a5c7 ("net: hns3: Add HNS3 IMP(Integrated Mgmt Proc) Cmd Interface Support")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The link status update function is called by timer every second. But
net_stop and net_open may be called with very short intervals. The link
status update function can not detect the link state has changed. It
causes the netdev not running problem.

This patch fixes it by updating the link state in ae_stop function.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch does bit of a clean-up by using already defined enums for
certain values in function hclge_is_special_opcode(). Below enums from
have been used as replacements for magic values:

enum hclge_opcode_type{
	<snip>
	HCLGE_OPC_STATS_64_BIT		= 0x0030,
	HCLGE_OPC_STATS_32_BIT		= 0x0031,
	HCLGE_OPC_STATS_MAC		= 0x0032,
	<snip>
};
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the hns3 driver has been built into kernel and then loaded with
the same driver which built as KLM, it may trigger an error like
below:

[   20.009555] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[   20.016789] hns3: Copyright (c) 2017 Huawei Corporation.
[   20.022100] Error: Driver 'hns3' is already registered, aborting...
[   23.517397] Unable to handle kernel NULL pointer dereference at virtual address 00000000
...
[   23.691583] Process insmod (pid: 1982, stack limit = 0x00000000cd5f21cb)
[   23.698270] Call trace:
[   23.700705]  __list_del_entry_valid+0x2c/0xd8
[   23.705049]  hnae3_unregister_client+0x68/0xa8
[   23.709487]  hns3_init_module+0x98/0x1000 [hns3]
[   23.714093]  do_one_initcall+0x5c/0x170
[   23.717918]  do_init_module+0x64/0x1f4
[   23.721654]  load_module+0x1d14/0x24b0
[   23.725390]  SyS_init_module+0x158/0x208
[   23.729300]  el0_svc_naked+0x30/0x34

This patch fixes it by adding module version info.

Fixes: 38caee9d ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>