- 19 Nov, 2018 28 commits
-
-
Joerg Roedel authored
Running kfdtest on an AMD Carizzo flooded the kernel log with thousands of these "was not implemented" messages, making it impossible to see other messages there. Ratelimit the messages to prevent user-space from flooding the kernel log. Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
David Francis authored
[Why] There was a full clock request struct of which only one value was being used. [How] Replace the struct with a uint32_t Signed-off-by:
David Francis <David.Francis@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by:
Sun peng Li <Sunpeng.Li@amd.com> Acked-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] Many panels support more than 8bpc but some modes are unavailable while running at greater than 8bpc due to DP/HDMI bandwidth constraints. Support for more than 8bpc was added recently in the driver but it defaults to the maximum supported bpc - locking out these modes. This should be a user configurable option such that the user can select what bpc configuration they would like. [How] This patch adds support for getting and setting the amdgpu driver specific "max bpc" property on the connector. It also adds support for limiting the output bpc based on the property value. The default limitation is the lowest value in the range, 8bpc. This was the old value before the range was uncapped. This patch should be updated/replaced later once common drm support for max bpc lands. Bugzilla: https://bugs.freedesktop.org/108542 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201585 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200645 Fixes: e03fd3f3 ("drm/amd/display: Do not limit color depth to 8bpc") v2: rebase on upstream (Alex) Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] Many panels support more than 8bpc but some modes are unavailable while running at greater than 8bpc due to DP/HDMI bandwidth constraints. Support for more than 8bpc was added recently in the driver but it defaults to the maximum supported bpc - locking out these modes. This should be a user configurable option such that the user can select what bpc configuration they would like. [How] This patch introduces the "max bpc" amdgpu driver specific connector property so the user can limit the maximum bpc. It ranges from 8 to 16. This doesn't directly set the preferred bpc for the panel since it follows Intel's existing driver conventions. This proprety should be removed once common drm support for max bpc lands. v2: rebase on upstream (Alex) Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/amd/amdgpu/psp_v10_0.c: In function 'psp_v10_0_ring_stop': drivers/gpu/drm/amd/amdgpu/psp_v10_0.c:230:19: warning: variable 'ring' set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/amdgpu/psp_v3_1.c: In function 'psp_v3_1_ring_stop': drivers/gpu/drm/amd/amdgpu/psp_v3_1.c:359:19: warning: variable ‘ring’ set but not used [-Wunused-but-set-variable] It not used since commit 4ef72453 ("drm/amdgpu: added api for stopping psp ring (v2)") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Emily Deng authored
Aligned the amd_sriov_msg_pf2vf_info_header and amd_sriov_msg_pf2vf_info_header's definition with libgv. Signed-off-by:
Emily Deng <Emily.Deng@amd.com> Reviewed-by:
Frank.Min <Frank.Min@amd.com> Signed-off-by:
-
David Francis authored
[Why] dc_link_set_backlight_level can be called from a context where the stream is unknown. In this case, we can still find which controller is driving this particular backlight [How] Compare links for equality instead of streams Signed-off-by:
-
Charlene Liu authored
expose dcn10_get_surface_visual_confirm_color() to be used in the future Signed-off-by:
Charlene Liu <charlene.liu@amd.com> Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
-
Dmytro Laktyushkin authored
A number of registers need to be updated for all active pipes wherever any pipe causes a change in watermarks. This change separates programming of these registers into a separate function call that is called for all active pipes during a bw update. Signed-off-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Joshua Aberback authored
[Why] We observed an issue where a display would not accept programming of the ignore_MSA_timing_param bit if the stream was blanked. [How] move enable_stream_features from enable_link_dp to core_link_enable_stream, after unblank_stream Signed-off-by:
Joshua Aberback <joshua.aberback@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Eric Bernstein authored
[Why] For some complicated blending transition cases, the head pipe of the second stream may end up being a higher pipe index than the free pipe. In those cases dc_add_plane_to_context will incorrectly set the tail_pipe to the free pipe, which will cause the top_pipe and bottom_pipe to be the same [How] Move the call to resource_get_tail_pipe_for_stream() to be before call to acquire_free_pipe_for_stream(). Signed-off-by:
Eric Bernstein <eric.bernstein@amd.com> Reviewed-by:
-
Xiaodong Yan authored
DPCD Extended Receiver Capability Field [Why] 1.dpcd extended receiver capability sometimes read fail, and corrupted data leads to sink caps is not correct. 2.sometimes sink reply ack with fewer data [How] check the return value of core_link_read_dpcd, try to read again when failure happens Signed-off-by:
Xiaodong Yan <Xiaodong.Yan@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
-
Steven Chiu authored
Signed-off-by:
Steven Chiu <steven.chiu@amd.com> Reviewed-by:
-
Dmytro Laktyushkin authored
Change the math to work in viewport rotation when calculating viewport and viewport adjustment. This simplifies the math for viewport calculation and makes viewport adjustment easier to understand. Signed-off-by:
-
Jun Lei authored
[why] Underflow is asserted due to some timing condition which does not actually result in visible underflow (i.e. it occurs while blanked). [how] Force clear underflow occured bit whenver we unblank. Signed-off-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
-
Nikola Cornij authored
[why] The condition to check for two pixels per containter has become rather long and is used in number of places. [how] Move the check to a helper function. Signed-off-by:
Nikola Cornij <nikola.cornij@amd.com> Reviewed-by:
-
Yogesh Mohan Marimuthu authored
[why] phy_pix_clk is one of the variable used to check if one PLL can be shared with displays having common mode set configuration. As of now phy_pix_clock varialbe is calculated in function dc_validate_stream(). dc_validate_stream() function is called after clocks are assigned for the new display. Due to this during hotplug, when PLL sharing conditions are checked for new display phy_pix_clk variable will be 0 and for displays that are already enabled phy_pix_clk will have some value. Hence PLL will not be shared and if the display hardware doesn't have any more PLL to assign, mode set will fail due to resource unavailability. [how] Instead of only calculating the phy_pix_clk variable after the PLL is assigned for new display, this patch calculates phy_pix_clk also during the before assigning the PLL for new display. Signed-off-by:
Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com> Reviewed-by:
-
Yongqiang Sun authored
[Why] Typo for return check value. [How] Correct one should be "return enable ? true : false;" Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by:
-
David Francis authored
[Why] Unused variable "refresh" and incorrect comment formatting [How] Remove variable, reindent comments Signed-off-by:
-
David Francis authored
[Why] DMCU firmware is not required - the system is expected to run fine without it. Therefore, wherever dmcu functions could be called, dmcu initialization shoudl be checked [How] Use the helpful hook dmcu_funcs->is_dmcu_initialized Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Acked-by:
-
Murton Liu authored
[why] Gamma was always being set as identity on SDR monitor, leading to no changes in gamma. This caused nightlight to not apply correctly. [how] Added a default gamma structure to compare against in the sdr case. Signed-off-by:
Murton Liu <murton.liu@amd.com> Reviewed-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by:
-
Jun Lei authored
[why] HUBP underflow is never cleared, which causes underflow in one test to fail another test, violating the independence requirements [how] Rather than make clearing implicit, we explicitly clear underflow status in DTN. Signed-off-by:
-
Nevenko Stupar authored
expose this functions for future use. Signed-off-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by:
-
Wenjing Liu authored
[Why] dc_add_stream_to_context is used to check bw requirement. It is not an error if it fails. [How] Replace DC_ERROR with DC_LOG_WARNING. Signed-off-by:
-
David Francis authored
[Why] dc_state has an array of dc_stream_status that contain pointers to the dc_plane_state and other useful information Confusingly, dc_stream_state also contains a dc_stream_status called status. This struct was partially initialized and used in a few places [How] stream->status.link has been replaced with stream->sink->link. If a stream does not have a sink, or a sink does not have a link, something has gone seriously wrong All other properties of stream->status were zeroed by kzalloc and never initialized, so they have been replaced by the number 0 This is a refactor: no functional change is intended Signed-off-by:
-
Steven Chiu authored
Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
New features for 4.21: amdgpu: - Support for SDMA paging queue on vega - Put compute EOP buffers into vram for better performance - Share more code with amdkfd - Support for scanout with DCC on gfx9 - Initial kerneldoc for DC - Updated SMU firmware support for gfx8 chips - Rework CSA handling for eventual support for preemption - XGMI PSP support - Clean up RLC handling - Enable GPU reset by default on VI, SOC15 dGPUs - Ring and IB test cleanups amdkfd: - Share more code with amdgpu ttm: - Move global init out of the drivers scheduler: - Track if schedulers are ready for work - Timeout/fault handling changes to facilitate GPU recovery Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114165113.3751-1-alexander.deucher@amd.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v4.21, part 1: UAPI Changes: - Add syncobj timeline support to drm. Cross-subsystem Changes: - Remove shared fence staging in dma-buf's fence object, and allow reserving more than 1 fence and add more paranoia when debugging. - Constify infoframe functions in video/hdmi. Core Changes: - Add vkms todo, and a lot of assorted doc fixes. - Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown(). - Move atomic state helper functions to drm_atomic_state_helper.[ch] - Refactor drm selftests, and add new tests. - DP MST atomic state cleanups. - Drop EXPORT_SYMBOL from drm leases. - Lease cleanups and fixes. - Create render node for vgem. Driver Changes: - Fix build failure in imx without fbdev emulation. - Add rotation quirk for GPD win2 panel. - Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG, Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, Himax HX8357D, simulated RTSM AEMv8. - Add dw_hdmi support to rockchip driver. - Fix YUV support in vc4. - Fix resource id handling in virtio. - Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support. - Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR. - Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup(). - Add Mali linear tiled formats, and enable them in the Mali-DP driver. - Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP. - Assorted driver cleanups and fixes. Signed-off-by:
-
- 18 Nov, 2018 12 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "A small batch of fixes for v4.20-rc3. The overflow continuation fix addresses something that has been broken for several releases. Arguably it could wait even longer, but it's a one line fix and this finishes the last of the known address range scrub bug reports. The revert addresses a lockdep regression. The unit tests are not critical to fix, but no reason to hold this fix back. Summary: - Address Range Scrub overflow continuation handling has been broken since it was initially merged. It was only recently that error injection and platform-BIOS support enabled this corner case to be exercised. - The recent attempt to provide more isolation for the kernel Address Range Scrub state machine from userapace initiated sessions triggers a lockdep report. Revert and try again at the next merge window. - Fix a kasan reported buffer overflow in libnvdimm unit test infrastrucutre (nfit_test)" * tag 'libnvdimm-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: Revert "acpi, nfit: Further restrict userspace ARS start requests" acpi, nfit: Fix ARS overflow continuation tools/testing/nvdimm: Fix the array size for dimm devices. -
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "16 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/memblock.c: fix a typo in __next_mem_pfn_range() comments mm, page_alloc: check for max order in hot path scripts/spdxcheck.py: make python3 compliant tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn mm/vmstat.c: fix NUMA statistics updates mm/gup.c: fix follow_page_mask() kerneldoc comment ocfs2: free up write context when direct IO failed scripts/faddr2line: fix location of start_kernel in comment mm: don't reclaim inodes with many attached pages mm, memory_hotplug: check zone_movable in has_unmovable_pages mm/swapfile.c: use kvzalloc for swap_info_struct allocation MAINTAINERS: update OMAP MMC entry hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444! kernel/sched/psi.c: simplify cgroup_move_task() z3fold: fix possible reclaim races
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "Fix an exec() related scalability/performance regression, which was caused by incorrectly calculating load and migrating tasks on exec() when they shouldn't be" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix cpu_util_wake() for 'execl' type workloads
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Fix uncore PMU enumeration for CofeeLake CPUs" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Support CoffeeLake 8th CBOX perf/x86/intel/uncore: Add more IMC PCI IDs for KabyLake and CoffeeLake CPUs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Ingo Molnar: "Misc fixes: two warning splat fixes, a leak fix and persistent memory allocation fixes for ARM" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Permit calling efi_mem_reserve_persistent() from atomic context efi/arm: Defer persistent reservations until after paging_init() efi/arm/libstub: Pack FDT after populating it efi/arm: Revert deferred unmap of early memmap mapping efi: Fix debugobjects warning on 'efi_rts_work'
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM spectre updates from Russell King: "These are the currently known final bits that resolve the Spectre issues. big.Little systems used to be sufficiently identical in that there were no differences between individual CPUs in the system that mattered to the kernel. With the advent of the Spectre problem, the CPUs now have differences in how the workaround is applied. As a result of previous Spectre patches, these systems ended up reporting quite a lot of: "CPUx: Spectre v2: incorrect context switching function, system vulnerable" messages due to the action of the big.Little switcher causing the CPUs to be re-initialised regularly. This series resolves that issue by making the CPU vtable unique to each CPU. However, since this is used very early, before per-cpu is setup, per-cpu can't be used. We also have a problem that two of the methods are not called from preempt-safe paths, but thankfully these remain identical between all CPUs in the system. To make sure, we validate that these are identical during boot" * 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: spectre-v2: per-CPU vtables to work around big.Little systems ARM: add PROC_VTABLE and PROC_TABLE macros ARM: clean up per-processor check_bugs method call ARM: split out processor lookup ARM: make lookup_processor_type() non-__init -
Chen Chang authored
Link: http://lkml.kernel.org/r/20181107100247.13359-1-rainccrun@gmail.comSigned-off-by:
Chen Chang <rainccrun@gmail.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Mike Rapoport <rppt@linux.ibm.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Hocko authored
Konstantin has noticed that kvmalloc might trigger the following warning: WARNING: CPU: 0 PID: 6676 at mm/vmstat.c:986 __fragmentation_index+0x54/0x60 [...] Call Trace: fragmentation_index+0x76/0x90 compaction_suitable+0x4f/0xf0 shrink_node+0x295/0x310 node_reclaim+0x205/0x250 get_page_from_freelist+0x649/0xad0 __alloc_pages_nodemask+0x12a/0x2a0 kmalloc_large_node+0x47/0x90 __kmalloc_node+0x22b/0x2e0 kvmalloc_node+0x3e/0x70 xt_alloc_table_info+0x3a/0x80 [x_tables] do_ip6t_set_ctl+0xcd/0x1c0 [ip6_tables] nf_setsockopt+0x44/0x60 SyS_setsockopt+0x6f/0xc0 do_syscall_64+0x67/0x120 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 the problem is that we only check for an out of bound order in the slow path and the node reclaim might happen from the fast path already. This is fixable by making sure that kvmalloc doesn't ever use kmalloc for requests that are larger than KMALLOC_MAX_SIZE but this also shows that the code is rather fragile. A recent UBSAN report just underlines that by the following report UBSAN: Undefined behaviour in mm/page_alloc.c:3117:19 shift exponent 51 is too large for 32-bit type 'int' CPU: 0 PID: 6520 Comm: syz-executor1 Not tainted 4.19.0-rc2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xd2/0x148 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x94 lib/ubsan.c:159 __ubsan_handle_shift_out_of_bounds+0x2b6/0x30b lib/ubsan.c:425 __zone_watermark_ok+0x2c7/0x400 mm/page_alloc.c:3117 zone_watermark_fast mm/page_alloc.c:3216 [inline] get_page_from_freelist+0xc49/0x44c0 mm/page_alloc.c:3300 __alloc_pages_nodemask+0x21e/0x640 mm/page_alloc.c:4370 alloc_pages_current+0xcc/0x210 mm/mempolicy.c:2093 alloc_pages include/linux/gfp.h:509 [inline] __get_free_pages+0x12/0x60 mm/page_alloc.c:4414 dma_mem_alloc+0x36/0x50 arch/x86/include/asm/floppy.h:156 raw_cmd_copyin drivers/block/floppy.c:3159 [inline] raw_cmd_ioctl drivers/block/floppy.c:3206 [inline] fd_locked_ioctl+0xa00/0x2c10 drivers/block/floppy.c:3544 fd_ioctl+0x40/0x60 drivers/block/floppy.c:3571 __blkdev_driver_ioctl block/ioctl.c:303 [inline] blkdev_ioctl+0xb3c/0x1a30 block/ioctl.c:601 block_ioctl+0x105/0x150 fs/block_dev.c:1883 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x1c0/0x1150 fs/ioctl.c:687 ksys_ioctl+0x9e/0xb0 fs/ioctl.c:702 __do_sys_ioctl fs/ioctl.c:709 [inline] __se_sys_ioctl fs/ioctl.c:707 [inline] __x64_sys_ioctl+0x7e/0xc0 fs/ioctl.c:707 do_syscall_64+0xc4/0x510 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Note that this is not a kvmalloc path. It is just that the fast path really depends on having sanitzed order as well. Therefore move the order check to the fast path. Link: http://lkml.kernel.org/r/20181113094305.GM15120@dhcp22.suse.czSigned-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reported-by:
Kyungtae Kim <kt0755@gmail.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Byoungyoung Lee <lifeasageek@gmail.com> Cc: "Dae R. Jeong" <threeearcat@gmail.com> Signed-off-by:
-
Uwe Kleine-König authored
Without this change the following happens when using Python3 (3.6.6): $ echo "GPL-2.0" | python3 scripts/spdxcheck.py - FAIL: 'str' object has no attribute 'decode' Traceback (most recent call last): File "scripts/spdxcheck.py", line 253, in <module> parser.parse_lines(sys.stdin, args.maxlines, '-') File "scripts/spdxcheck.py", line 171, in parse_lines line = line.decode(locale.getpreferredencoding(False), errors='ignore') AttributeError: 'str' object has no attribute 'decode' So as the line is already a string, there is no need to decode it and the line can be dropped. /usr/bin/python on Arch is Python 3. So this would indeed be worth going into 4.19. Link: http://lkml.kernel.org/r/20181023070802.22558-1-u.kleine-koenig@pengutronix.deSigned-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Joe Perches <joe@perches.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Yufen Yu authored
Other filesystems such as ext4, f2fs and ubifs all return ENXIO when lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset. man 2 lseek says : EINVAL whence is not valid. Or: the resulting file offset would be : negative, or beyond the end of a seekable device. : : ENXIO whence is SEEK_DATA or SEEK_HOLE, and the file offset is beyond : the end of the file. Make tmpfs return ENXIO under these circumstances as well. After this, tmpfs also passes xfstests's generic/448. [akpm@linux-foundation.org: rewrite changelog] Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.comSigned-off-by:
Yufen Yu <yuyufen@huawei.com> Reviewed-by:
-
Arnd Bergmann authored
gcc-8 complains about the prototype for this function: lib/ubsan.c:432:1: error: ignoring attribute 'noreturn' in declaration of a built-in function '__ubsan_handle_builtin_unreachable' because it conflicts with attribute 'const' [-Werror=attributes] This is actually a GCC's bug. In GCC internals __ubsan_handle_builtin_unreachable() declared with both 'noreturn' and 'const' attributes instead of only 'noreturn': https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84210 Workaround this by removing the noreturn attribute. [aryabinin: add information about GCC bug in changelog] Link: http://lkml.kernel.org/r/20181107144516.4587-1-aryabinin@virtuozzo.comSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Olof Johansson <olof@lixom.net> Cc: <stable@vger.kernel.org> Signed-off-by:
-
