It's only used to keep count of caps being trimmed, but that requires
that we hold the session->s_mutex to prevent multiple trimming
operations from running concurrently.

We can achieve the same effect using an integer on the stack, which
allows us to (eventually) not need the s_mutex.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

It's protected by the s_gen_ttl_lock, so we should fetch under it
and ensure that we're using the same generation in both places.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Nothing calls these routines.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

We already mark the mapping in that case, and doing this can cause
false positives to occur at fsync time, as well as spurious read
errors.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Make client use osd reply and session message to infer if itself is
blacklisted. Client reconnect to cluster using new entity addr if it
is blacklisted. Auto reconnect is limited to once every 30 minutes.

Auto reconnect is disabled by default. It can be enabled/disabled by
recover_session=<no|clean> mount option. In 'clean' mode, client drops
any dirty data/metadata, invalidates page caches and invalidates all
writable file handles. After reconnect, file locks become stale because
MDS loses track of them. If an inode contains any stale file locks,
read/write on the indoe are not allowed until applications release all
stale file locks.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

After mds evicts session, file locks get lost sliently. It's not safe to
let programs continue to do read/write.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

It closes mds sessions, drop all caps and invalidates page caches,
then use new entity address to reconnect to the cluster.

After reconnect, all dirty data/metadata are dropped, file locks
get lost sliently. Open files continue to work because client will
try renewing caps on later read/write.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Also change several other functions' arguments, no logical changes.
This is preparetion for later patch that checks filp error.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Use errseq_t to track and report errors of async metadata operations,
similar to how kernel handles errors during writeback.

If any dirty caps or any unsafe request gets dropped during session
eviction, record -EIO in corresponding inode's i_meta_err. The error
will be reported by subsequent fsync,
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

CEPH_MDS_SESSION_{RESTARTING,RECONNECTING} are for for mds failover,
they are sub-states of CEPH_MDS_SESSION_OPEN. So __close_session()
should send close request for session in these two state.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

This function also re-open connections to OSD/MON, and re-send in-flight
OSD requests after re-opening connections to OSD.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Most filesystems that provide virtual xattrs (e.g. CIFS) don't display
them via listxattr(). Ceph does, and that causes some of the tests in
xfstests to fail.

Have cephfs stop listing vxattrs in listxattr. Userspace can always
query them directly when the name is known.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

There is no reason to prevent this. The OSD should be able to handle
this as long as the objects are different, and the existing code falls
back when the offset into the object is different.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

When filling an inode with info from the MDS, i_blkbits is being
initialized using fl_stripe_unit, which contains the stripe unit in
bytes.  Unfortunately, this doesn't make sense for directories as they
have fl_stripe_unit set to '0'.  This means that i_blkbits will be set
to 0xff, causing an UBSAN undefined behaviour in i_blocksize():

  UBSAN: Undefined behaviour in ./include/linux/fs.h:731:12
  shift exponent 255 is too large for 32-bit type 'int'

Fix this by initializing i_blkbits to CEPH_BLOCK_SHIFT if fl_stripe_unit
is zero.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

This reverts commit b03755ad.

This is sad, and done for all the wrong reasons.  Because that commit is
good, and does exactly what it says: avoids a lot of small disk requests
for the inode table read-ahead.

However, it turns out that it causes an entirely unrelated problem: the
getrandom() system call was introduced back in 2014 by commit
c6e9d6f3 ("random: introduce getrandom(2) system call"), and people
use it as a convenient source of good random numbers.

But part of the current semantics for getrandom() is that it waits for
the entropy pool to fill at least partially (unlike /dev/urandom).  And
at least ArchLinux apparently has a systemd that uses getrandom() at
boot time, and the improvements in IO patterns means that existing
installations suddenly start hanging, waiting for entropy that will
never happen.

It seems to be an unlucky combination of not _quite_ enough entropy,
together with a particular systemd version and configuration.  Lennart
says that the systemd-random-seed process (which is what does this early
access) is supposed to not block any other boot activity, but sadly that
doesn't actually seem to be the case (possibly due bogus dependencies on
cryptsetup for encrypted swapspace).

The correct fix is to fix getrandom() to not block when it's not
appropriate, but that fix is going to take a lot more discussion.  Do we
just make it act like /dev/urandom by default, and add a new flag for
"wait for entropy"? Do we add a boot-time option? Or do we just limit
the amount of time it will wait for entropy?

So in the meantime, we do the revert to give us time to discuss the
eventual fix for the fundamental problem, at which point we can re-apply
the ext4 inode table access optimization.
Reported-by: Ahmed S. Darwish <darwish.07@gmail.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Alexander E. Patrakov <patrakov@gmail.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull kvm fixes from Paolo Bonzini:
 "The main change here is a revert of reverts. We recently simplified
  some code that was thought unnecessary; however, since then KVM has
  grown quite a few cond_resched()s and for that reason the simplified
  code is prone to livelocks---one CPUs tries to empty a list of guest
  page tables while the others keep adding to them. This adds back the
  generation-based zapping of guest page tables, which was not
  unnecessary after all.

  On top of this, there is a fix for a kernel memory leak and a couple
  of s390 fixlets as well"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot
  KVM: x86: work around leak of uninitialized stack contents
  KVM: nVMX: handle page fault in vmread
  KVM: s390: Do not leak kernel stack data in the KVM_S390_INTERRUPT ioctl
  KVM: s390: kvm_s390_vm_start_migration: check dirty_bitmap before using it as target for memset()

Pull virtio fix from Michael Tsirkin:
 "A last minute revert

  The 32-bit build got broken by the latest defence in depth patch.
  Revert and we'll try again in the next cycle"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  Revert "vhost: block speculation of translated descriptors"

Pull RISC-V fix from Paul Walmsley:
 "Last week, Palmer and I learned that there was an error in the RISC-V
  kernel image header format that could make it less compatible with the
  ARM64 kernel image header format. I had missed this error during my
  original reviews of the patch.

  The kernel image header format is an interface that impacts
  bootloaders, QEMU, and other user tools. Those packages must be
  updated to align with whatever is merged in the kernel. We would like
  to avoid proliferating these image formats by keeping the RISC-V
  header as close as possible to the existing ARM64 header. Since the
  arch/riscv patch that adds support for the image header was merged
  with our v5.3-rc1 pull request as commit 0f327f2a ("RISC-V: Add
  an Image header that boot loader can parse."), we think it wise to try
  to fix this error before v5.3 is released.

  The fix itself should be backwards-compatible with any project that
  has already merged support for premature versions of this interface.
  It primarily involves ensuring that the RISC-V image header has
  something useful in the same field as the ARM64 image header"

* tag 'riscv/for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: modify the Image header to improve compatibility with the ARM64 header

This reverts commit a89db445.

I was hasty to include this patch, and it breaks the build on 32 bit.
Defence in depth is good but let's do it properly.

Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Pull networking fixes from David Miller:

 1) Don't corrupt xfrm_interface parms before validation, from Nicolas
    Dichtel.

 2) Revert use of usb-wakeup in btusb, from Mario Limonciello.

 3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from
    Leonardo Bras.

 4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso.

 5) Missing ULP check in sock_map, from John Fastabend.

 6) Fix receive statistic handling in forcedeth, from Zhu Yanjun.

 7) Fix length of SKB allocated in 6pack driver, from Christophe
    JAILLET.

 8) ip6_route_info_create() returns an error pointer, not NULL. From
    Maciej Żenczykowski.

 9) Only add RDS sock to the hashes after rs_transport is set, from
    Ka-Cheong Poon.

10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets.

11) Presence of transmit IPSEC offload in an SKB is not tested for
    correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff
    Kirsher.

12) Need rcu_barrier() when register_netdevice() takes one of the
    notifier based failure paths, from Subash Abhinov Kasiviswanathan.

13) Fix leak in sctp_do_bind(), from Mao Wenan.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
  cdc_ether: fix rndis support for Mediatek based smartphones
  sctp: destroy bucket if failed to bind addr
  sctp: remove redundant assignment when call sctp_get_port_local
  sctp: change return type of sctp_get_port_local
  ixgbevf: Fix secpath usage for IPsec Tx offload
  sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()'
  ixgbe: Fix secpath usage for IPsec TX offload.
  net: qrtr: fix memort leak in qrtr_tun_write_iter
  net: Fix null de-reference of device refcount
  ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()'
  tun: fix use-after-free when register netdev failed
  tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR
  ixgbe: fix double clean of Tx descriptors with xdp
  ixgbe: Prevent u8 wrapping of ITR value to something less than 10us
  mlx4: fix spelling mistake "veify" -> "verify"
  net: hns3: fix spelling mistake "undeflow" -> "underflow"
  net: lmc: fix spelling mistake "runnin" -> "running"
  NFC: st95hf: fix spelling mistake "receieve" -> "receive"
  net/rds: An rds_sock is added too early to the hash table
  mac80211: Do not send Layer 2 Update frame before authorization
  ...

Pull MMC fixes from Ulf Hansson:

 - tmio: Fixup runtime PM management during probe and remove

 - sdhci-pci-o2micro: Fix eMMC initialization for an AMD SoC

 - bcm2835: Prevent lockups when terminating work

* tag 'mmc-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: tmio: Fixup runtime PM management during remove
  mmc: tmio: Fixup runtime PM management during probe
  Revert "mmc: tmio: move runtime PM enablement to the driver implementations"
  Revert "mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller"
  Revert "mmc: bcm2835: Terminate timeout work synchronously"

Pull drm fixes from Dave Airlie:
 "From the maintainer summit, just some last minute fixes for final:

  lima:
   - fix gem_wait ioctl

  core:
   - constify modes list

  i915:
   - DP MST high color depth regression
   - GPU hangs on vulkan compute workloads"

* tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drm:
  drm/lima: fix lima_gem_wait() return value
  drm/i915: Restore relaxed padding (OCL_OOB_SUPPRES_ENABLE) for skl+
  drm/i915: Limit MST to <= 8bpc once again
  drm/modes: Make the whitelist more const

Merge tag 'kvm-s390-master-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master

KVM: s390: Fixes for 5.3

- prevent a user triggerable oops in the migration code
- do not leak kernel stack content

James Harvey reported a livelock that was introduced by commit
d012a06a ("Revert "KVM: x86/mmu: Zap only the relevant pages when
removing a memslot"").

The livelock occurs because kvm_mmu_zap_all() as it exists today will
voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs
to add shadow pages.  With enough vCPUs, kvm_mmu_zap_all() can get stuck
in an infinite loop as it can never zap all pages before observing lock
contention or the need to reschedule.  The equivalent of kvm_mmu_zap_all()
that was in use at the time of the reverted commit (4e103134, "KVM:
x86/mmu: Zap only the relevant pages when removing a memslot") employed
a fast invalidate mechanism and was not susceptible to the above livelock.

There are three ways to fix the livelock:

- Reverting the revert (commit d012a06a) is not a viable option as
  the revert is needed to fix a regression that occurs when the guest has
  one or more assigned devices.  It's unlikely we'll root cause the device
  assignment regression soon enough to fix the regression timely.

- Remove the conditional reschedule from kvm_mmu_zap_all().  However, although
  removing the reschedule would be a smaller code change, it's less safe
  in the sense that the resulting kvm_mmu_zap_all() hasn't been used in
  the wild for flushing memslots since the fast invalidate mechanism was
  introduced by commit 6ca18b69 ("KVM: x86: use the fast way to
  invalidate all pages"), back in 2013.

- Reintroduce the fast invalidate mechanism and use it when zapping shadow
  pages in response to a memslot being deleted/moved, which is what this
  patch does.

For all intents and purposes, this is a revert of commit ea145aac
("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of
commit 7390de1e ("Revert "KVM: x86: use the fast way to invalidate
all pages""), i.e. restores the behavior of commit 5304b8d3 ("KVM:
MMU: fast invalidate all pages") and commit 6ca18b69 ("KVM: x86:
use the fast way to invalidate all pages") respectively.

Fixes: d012a06a ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"")
Reported-by: James Harvey <jamespharvey20@gmail.com>
Cc: Alex Willamson <alex.williamson@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Emulation of VMPTRST can incorrectly inject a page fault
when passed an operand that points to an MMIO address.
The page fault will use uninitialized kernel stack memory
as the CR2 and error code.

The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR
exit to userspace; however, it is not an easy fix, so for now just ensure
that the error code and CR2 are zero.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Cc: stable@vger.kernel.org
[add comment]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The implementation of vmread to memory is still incomplete, as it
lacks the ability to do vmread to I/O memory just like vmptrst.

Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Part of the intention during the definition of the RISC-V kernel image
header was to lay the groundwork for a future merge with the ARM64
image header.  One error during my original review was not noticing
that the RISC-V header's "magic" field was at a different size and
position than the ARM64's "magic" field.  If the existing ARM64 Image
header parsing code were to attempt to parse an existing RISC-V kernel
image header format, it would see a magic number 0.  This is
undesirable, since it's our intention to align as closely as possible
with the ARM64 header format.  Another problem was that the original
"res3" field was not being initialized correctly to zero.

Address these issues by creating a 32-bit "magic2" field in the RISC-V
header which matches the ARM64 "magic" field.  RISC-V binaries will
store "RSC\x05" in this field.  The intention is that the use of the
existing 64-bit "magic" field in the RISC-V header will be deprecated
over time.  Increment the minor version number of the file format to
indicate this change, and update the documentation accordingly.  Fix
the assembler directives in head.S to ensure that reserved fields are
properly zero-initialized.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reported-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Atish Patra <atish.patra@wdc.com>
Cc: Karsten Merker <merker@debian.org>
Link: https://lore.kernel.org/linux-riscv/194c2f10c9806720623430dbf0cc59a965e50448.camel@wdc.com/T/#u
Link: https://lore.kernel.org/linux-riscv/mhng-755b14c4-8f35-4079-a7ff-e421fd1b02bc@palmer-si-x1e/T/#t

A Mediatek based smartphone owner reports problems with USB
tethering in Linux.  The verbose USB listing shows a rndis_host
interface pair (e0/01/03 + 10/00/00), but the driver fails to
bind with

[  355.960428] usb 1-4: bad CDC descriptors

The problem is a failsafe test intended to filter out ACM serial
functions using the same 02/02/ff class/subclass/protocol as RNDIS.
The serial functions are recognized by their non-zero bmCapabilities.

No RNDIS function with non-zero bmCapabilities were known at the time
this failsafe was added. But it turns out that some Wireless class
RNDIS functions are using the bmCapabilities field. These functions
are uniquely identified as RNDIS by their class/subclass/protocol, so
the failing test can safely be disabled.  The same applies to the two
types of Misc class RNDIS functions.

Applying the failsafe to Communication class functions only retains
the original functionality, and fixes the problem for the Mediatek based
smartphone.

Tow examples of CDC functional descriptors with non-zero bmCapabilities
from Wireless class RNDIS functions are:

0e8d:000a  Mediatek Crosscall Spider X5 3G Phone

      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x0f
          connection notifications
          sends break
          line coding and serial state
          get/set/clear comm features
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1

and

19d2:1023  ZTE K4201-z

      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1

The Mediatek example is believed to apply to most smartphones with
Mediatek firmware.  The ZTE example is most likely also part of a larger
family of devices/firmwares.
Suggested-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mao Wenan says:

====================
fix memory leak for sctp_do_bind

First two patches are to do cleanup, remove redundant assignment,
and change return type of sctp_get_port_local.
Third patch is to fix memory leak for sctp_do_bind if failed
to bind address.

v2: add one patch to change return type of sctp_get_port_local.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There is one memory leak bug report:
BUG: memory leak
unreferenced object 0xffff8881dc4c5ec0 (size 40):
  comm "syz-executor.0", pid 5673, jiffies 4298198457 (age 27.578s)
  hex dump (first 32 bytes):
    02 00 00 00 81 88 ff ff 00 00 00 00 00 00 00 00  ................
    f8 63 3d c1 81 88 ff ff 00 00 00 00 00 00 00 00  .c=.............
  backtrace:
    [<0000000072006339>] sctp_get_port_local+0x2a1/0xa00 [sctp]
    [<00000000c7b379ec>] sctp_do_bind+0x176/0x2c0 [sctp]
    [<000000005be274a2>] sctp_bind+0x5a/0x80 [sctp]
    [<00000000b66b4044>] inet6_bind+0x59/0xd0 [ipv6]
    [<00000000c68c7f42>] __sys_bind+0x120/0x1f0 net/socket.c:1647
    [<000000004513635b>] __do_sys_bind net/socket.c:1658 [inline]
    [<000000004513635b>] __se_sys_bind net/socket.c:1656 [inline]
    [<000000004513635b>] __x64_sys_bind+0x3e/0x50 net/socket.c:1656
    [<0000000061f2501e>] do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296
    [<0000000003d1e05e>] entry_SYSCALL_64_after_hwframe+0x49/0xbe

This is because in sctp_do_bind, if sctp_get_port_local is to
create hash bucket successfully, and sctp_add_bind_addr failed
to bind address, e.g return -ENOMEM, so memory leak found, it
needs to destroy allocated bucket.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are more parentheses in if clause when call sctp_get_port_local
in sctp_do_bind, and redundant assignment to 'ret'. This patch is to
do cleanup.
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently sctp_get_port_local() returns a long
which is either 0,1 or a pointer casted to long.
It's neither of the callers use the return value since
commit 62208f12 ("net: sctp: simplify sctp_get_port").
Now two callers are sctp_get_port and sctp_do_bind,
they actually assumend a casted to an int was the same as
a pointer casted to a long, and they don't save the return
value just check whether it is zero or non-zero, so
it would better change return type from long to int for
sctp_get_port_local.
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Port the same fix for ixgbe to ixgbevf.

The ixgbevf driver currently does IPsec Tx offloading
based on an existing secpath. However, the secpath
can also come from the Rx side, in this case it is
misinterpreted for Tx offload and the packets are
dropped with a "bad sa_idx" error. Fix this by using
the xfrm_offload() function to test for Tx offload.

CC: Shannon Nelson <snelson@pensando.io>
Fixes: 7f68d430 ("ixgbevf: enable VF IPsec offload operations")
Reported-by: Jonathan Tooker <jonathan@reliablehosting.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Accessing the device when it may be runtime suspended is a bug, which is
the case in tmio_mmc_host_remove(). Let's fix the behaviour.

Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>

The tmio_mmc_host_probe() calls pm_runtime_set_active() to update the
runtime PM status of the device, as to make it reflect the current status
of the HW. This works fine for most cases, but unfortunate not for all.
Especially, there is a generic problem when the device has a genpd attached
and that genpd have the ->start|stop() callbacks assigned.

More precisely, if the driver calls pm_runtime_set_active() during
->probe(), genpd does not get to invoke the ->start() callback for it,
which means the HW isn't really fully powered on. Furthermore, in the next
phase, when the device becomes runtime suspended, genpd will invoke the
->stop() callback for it, potentially leading to usage count imbalance
problems, depending on what's implemented behind the callbacks of course.

To fix this problem, convert to call pm_runtime_get_sync() from
tmio_mmc_host_probe() rather than pm_runtime_set_active(). Additionally, to
avoid bumping usage counters and unnecessary re-initializing the HW the
first time the tmio driver's ->runtime_resume() callback is called,
introduce a state flag to keeping track of this.

Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>

This reverts commit 7ff21319.

It turns out that the above commit introduces other problems. For example,
calling pm_runtime_set_active() must not be done prior calling
pm_runtime_enable() as that makes it fail. This leads to additional
problems, such as clock enables being wrongly balanced.

Rather than fixing the problem on top, let's start over by doing a revert.

Fixes: 7ff21319 ("mmc: tmio: move runtime PM enablement to the driver implementations")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>

Pull cgroup fix from Tejun Heo:
 "Roman found and fixed a bug in the cgroup2 freezer which allows new
  child cgroup to escape frozen state"

* 'for-5.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: freezer: fix frozen state inheritance
  kselftests: cgroup: add freezer mkdir test