- 17 Jan, 2010 16 commits
-
-
Hannes Reinecke authored
When removing several devices aic79xx will occasionally Oops in ahd_handle_nonpkt_busfree during rescan. Looking at the code I found that we're indeed not checking if the scb in question is NULL. So check for it before accessing it. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Swen Schillig authored
The hardware used with zfcp provides a timer for CT and ELS requests instead of an abort capability for these commands. To correctly handle the FC BSG timeouts, pass the timeout from the BSG requests to the hardware. Signed-off-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
-
Swen Schillig authored
Introduce a zfcp callback for timeouts triggered from FC BSG. With zfcp, the underlying hardware cannot abort CT or ELS requests, so there is nothing to do when the block layer timeout expires. To avoid interference with the block layer timeout, simply indicate that the block layer timer should be reset. The timer running in the hardware for the pending CT or ELS request will return the request when it expires. Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
-
Swen Schillig authored
The hardware used with zfcp cannot abort a currently pending CT or ELS request. Therefore we need the option to postpone the timeout triggered request abort within the fc layer, since there is nothing zfcp can do to stop the request at this point. Cc: James Smart <James.Smart@emulex.com> Signed-off-by:
-
Heiko Carstens authored
Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Christof Schmitt authored
Advance the correct pointer when inserting the linebreak for the HBA trace. It was missing in the output since the pointer to the output buffer was never advanced, and the linebreak character was overwritten later. Reviewed-by:
-
Christof Schmitt authored
The patch "zfcp: Simplify handling of ct and els requests" accidentally removed the call to zfcp_fc_wka_port_put for FC CT BSG requests, thus not issuing a "close" request for the WKA ports. Introduce a CT specific handler to first call zfcp_fc_wka_port_put and then continue with the generic handler when returning from FC CT BSG requests. Reviewed-by:
-
Giridhar Malavali authored
Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by:
-
Harish Zunjarrao authored
The 32bit kernel does not add padding bytes in the fc_bsg_request structure whereas the 64bit kernel adds padding bytes in the fc_bsg_request structure. Due to this, structure elements gets mismatched with 32bit application and 64bit kernel.To resolve this, used packed modifier to avoid adding padding bytes. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
The driver did not account for non-tape devices needing to employ proper FCP2 recovery. Driver now checks the FCP2-capable flag only, rather than using a midlayer-determined flag (TYPE_TAPE). Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Boaz Harrosh authored
Because of the terrible structuring of scsi-bidi-commands it breaks some of the life time rules of a scsi-command. It is now not allowed to free up the block-request before cleanup and partial deallocation of the scsi-command. (Which is not so for none bidi commands) The right fix to this problem would be to make bidi command a first citizen by allocating a scsi_sdb pointer at scsi command just like cmd->prot_sdb. The bidi sdb should be allocated/deallocated as part of the get/put_command (Again like the prot_sdb) and the current decoupling of scsi_cmnd and blk-request should be kept. For now make sure scsi_release_buffers() is called before the call to blk_end_request_all() which might cause the suicide of the block requests. At best the leak of bidi buffers, at worse a crash, as there is a race between the existence of the bidi_request and the free of the associated bidi_sdb. The reason this was never hit before is because only OSD has the potential of doing asynchronous bidi commands. (So does bsg but it is never used) And OSD clients just happen to do all their bidi commands synchronously, up until recently. CC: Stable Tree <stable@kernel.org> Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
-
Anatolij Gustschin authored
Since commit 9d2e9d66 mptsas driver fails to allocate memory for the MPT chain buffers for second LSI adapter on PPC440SPe Katmai platform: ... ioc1: LSISAS1068E B3: Capabilities={Initiator} mptbase: ioc1: ERROR - Unable to allocate Reply, Request, Chain Buffers! mptbase: ioc1: ERROR - didn't initialize properly! (-3) mptsas: probe of 0002:31:00.0 failed with error -3 This commit increased MPT_FC_CAN_QUEUE value but initChainBuffers() doesn't differentiate between SAS and FC causing increased allocation for SAS case, too. Later pci_alloc_consistent() fails to allocate increased chain buffer pool size for SAS case. Provide a fix by looking at the bus type and using appropriate MPT_SAS_CAN_QUEUE value while calculation of the number of chain buffers. Signed-off-by:
Anatolij Gustschin <agust@denx.de> Acked-by:
Kashyap Desai <kashyap.desai@lsi.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by:
-
These particular problems were reported by Cisco and SAP and customers as well. Cisco reported on RHEL4 U6 and SAP reported on SLES9 SP4 and SLES10 SP2. We added these fixes on RHEL4 U6 and gave a private build to IBM and Cisco. Cisco and IBM tested it for more than 15 days and they reported that they did not see the issue so far. Before the fix, Cisco used to see the issue within 5 days. We generated a patch for SLES9 SP4 and SLES10 SP2 and submitted to Novell. Novell applied the patch and gave a test build to SAP. SAP tested and reported that the build is working properly. We also tested in our lab using the tools "dishogsync", which is IO stress tool and the tool was provided by Cisco. Issue1: File System going into read-only mode Root cause: The driver tends to not free the memory (FIB) when the management request exits prematurely. The accumulation of such un-freed memory causes the driver to fail to allocate anymore memory (FIB) and hence return 0x70000 value to the upper layer, which puts the file system into read only mode. Fix details: The fix makes sure to free the memory (FIB) even if the request exits prematurely hence ensuring the driver wouldn't run out of memory (FIBs). Issue2: False Raid Alert occurs When the Physical Drives and Logical drives are reported as deleted or added, even though there is no change done on the system Root cause: Driver IOCTLs is signaled with EINTR while waiting on response from the lower layers. Returning "EINTR" will never initiate internal retry. Fix details: The issue was fixed by replacing "EINTR" with "ERESTARTSYS" for mid-layer retries. Signed-off-by:
Penchala Narasimha Reddy <ServeRAIDDriver@hcl.in> Signed-off-by:
-
James Bottomley authored
lpfc_hbadisc.c and lpfc_hw4.h accidentally got set executable. Reported-by:
Thomas Backlund <tmb@mandriva.org> Cc: James Smart <James.Smart@Emulex.Com> Signed-off-by:
-
KOSAKI Motohiro authored
commit f2260e6b (page allocator: update NR_FREE_PAGES only as necessary) made one minor regression. if __rmqueue() was failed, NR_FREE_PAGES stat go wrong. this patch fixes it. Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Reviewed-by:
Minchan Kim <minchan.kim@gmail.com> Reported-by:
Huang Shijie <shijie8@gmail.com> Reviewed-by:
Christoph Lameter <cl@linux-foundation.org> Cc: <stable@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 16 Jan, 2010 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Do not use device name after device_unregister i2c/pca: Don't use *_interruptible i2c-ali1563: Remove sparse warnings i2c: Test off by one in {piix4,vt596}_transaction() i2c-core: Storage class should be before const qualifier
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, uv: Ensure hub revision set for all ACPI modes. x86, uv: Add function retrieving node controller revision number x86: xen: 64-bit kernel RPL should be 0 x86: kernel_thread() -- initialize SS to a known state x86/agp: Fix agp_amd64_init and agp_amd64_cleanup x86: SGI UV: Fix mapping of MMIO registers x86: mce.h: Fix warning in header checks
-
Linus Torvalds authored
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futexes: Remove rw parameter from get_futex_key()
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Check if /dev/null can be used as the -o gcc argument perf tools: Move QUIET_STDERR def to before first use perf: Stop stack frame walking off kernel addresses boundaries
-
Linus Torvalds authored
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing/filters: Add comment for match callbacks tracing/filters: Fix MATCH_FULL filter matching for PTR_STRING tracing/filters: Fix MATCH_MIDDLE_ONLY filter matching lib: Introduce strnstr() tracing/filters: Fix MATCH_END_ONLY filter matching tracing/filters: Fix MATCH_FRONT_ONLY filter matching ftrace: Fix MATCH_END_ONLY function filter tracing/x86: Derive arch from bits argument in recordmcount.pl ring-buffer: Add rb_list_head() wrapper around new reader page next field ring-buffer: Wrap a list.next reference with rb_list_head()
-
Mark Brown authored
Fix divide by zero and broken output. Commit 600ce1a0 ("fix clock setting for Samsung SoC Framebuffer") introduced a mandatory refresh parameter to the platform data for the S3C framebuffer but did not introduce any validation code, causing existing platforms (none of which have refresh set) to divide by zero whenever the framebuffer is configured, generating warnings and unusable output. Ben Dooks noted several problems with the patch: - The platform data supplies the pixclk directly and should already have taken care of the refresh rate. - The addition of a window ID parameter doesn't help since only the root framebuffer can control the pixclk. - pixclk is specified in picoseconds (rather than Hz) as the patch assumed. and suggests reverting the commit so do that. Without fixing this no mainline user of the driver will produce output. [akpm@linux-foundation.org: don't revert the correct bit] Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: <stable@kernel.org> Signed-off-by:
-
David Howells authored
Fix a problem in NOMMU mmap with ramfs whereby a shared mmap can happen over the end of a truncation. The problem is that ramfs_nommu_check_mappings() checks that the reduced file size against the VMA tree, but not the vm_region tree. The following sequence of events can cause the problem: fd = open("/tmp/x", O_RDWR|O_TRUNC|O_CREAT, 0600); ftruncate(fd, 32 * 1024); a = mmap(NULL, 32 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); b = mmap(NULL, 16 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); munmap(a, 32 * 1024); ftruncate(fd, 16 * 1024); c = mmap(NULL, 32 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); Mapping 'a' creates a vm_region covering 32KB of the file. Mapping 'b' sees that the vm_region from 'a' is covering the region it wants and so shares it, pinning it in memory. Mapping 'a' then goes away and the file is truncated to the end of VMA 'b'. However, the region allocated by 'a' is still in effect, and has _not_ been reduced. Mapping 'c' is then created, and because there's a vm_region covering the desired region, get_unmapped_area() is _not_ called to repeat the check, and the mapping is granted, even though the pages from the latter half of the mapping have been discarded. However: d = mmap(NULL, 16 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); Mapping 'd' should work, and should end up sharing the region allocated by 'a'. To deal with this, we shrink the vm_region struct during the truncation, lest do_mmap_pgoff() take it as licence to share the full region automatically without calling the get_unmapped_area() file op again. Signed-off-by:David Howells <dhowells@redhat.com> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Greg Ungerer <gerg@snapgear.com> Signed-off-by:
-
David Howells authored
Fix the race between the truncation of a ramfs file and an attempt to make a shared mmap of region of that file. The problem is that do_mmap_pgoff() calls f_op->get_unmapped_area() to verify that the file region is made of contiguous pages and to find its base address - but there isn't any locking to guarantee this region until vma_prio_tree_insert() is called by add_vma_to_mm(). Note that moving the functionality into f_op->mmap() doesn't help as that is also called before vma_prio_tree_insert(). Instead make ramfs_nommu_check_mappings() grab nommu_region_sem whilst it does its checks. This means that this function will wait whilst mmaps take place. Signed-off-by:
-
David Howells authored
get_unmapped_area() is unnecessary for NOMMU as no-one calls it. Signed-off-by:
-
David Howells authored
In split_vma(), there's no need to check if the VMA being split has a region that's in use by more than one VMA because: (1) The preceding test prohibits splitting of non-anonymous VMAs and regions (eg: file or chardev backed VMAs). (2) Anonymous regions can't be mapped multiple times because there's no handle by which to refer to the already existing region. (3) If a VMA has previously been split, then the region backing it has also been split into two regions, each of usage 1. Signed-off-by: -
David Howells authored
The vm_usage count field in struct vm_region does not need to be atomic as it's only even modified whilst nommu_region_sem is write locked. Signed-off-by:
-
David Howells authored
Commit c4caa778 ("file ->get_unmapped_area() shouldn't duplicate work of get_unmapped_area()") broke SYSV SHM for NOMMU by taking away the pointer to shm_get_unmapped_area() from shm_file_operations. Put it back conditionally on CONFIG_MMU=n. file->f_ops->get_unmapped_area() is used to find out the base address for a mapping of a mappable chardev device or mappable memory-based file (such as a ramfs file). It needs to be called prior to file->f_ops->mmap() being called. Signed-off-by:
-
Wu Fengguang authored
The function prototype mismatches in call stack: [<ffffffff81494268>] print_block_size+0x58/0x60 [<ffffffff81487e3f>] sysdev_class_show+0x1f/0x30 [<ffffffff811d629b>] sysfs_read_file+0xcb/0x1f0 [<ffffffff81176328>] vfs_read+0xc8/0x180 Due to prototype mismatch, print_block_size() will sprintf() into *attribute instead of *buf, hence user space will read the initial zeros from *buf: $ hexdump /sys/devices/system/memory/block_size_bytes 0000000 0000 0000 0000 0000 0000008 After patch: cat /sys/devices/system/memory/block_size_bytes 0x8000000 This complements commits c29af9636 and 4a0b2b4d. Signed-off-by:Wu Fengguang <fengguang.wu@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: "Zheng, Shaohui" <shaohui.zheng@intel.com> Signed-off-by:
-
Wu Fengguang authored
Signed-off-by:
-
Daisuke Nishimura authored
Current mem_cgroup_force_empty() only ensures mem->res.usage == 0 on success. But this doesn't guarantee memcg's LRU is really empty, because there are some cases in which !PageCgrupUsed pages exist on memcg's LRU. For example: - Pages can be uncharged by its owner process while they are on LRU. - race between mem_cgroup_add_lru_list() and __mem_cgroup_uncharge_common(). So there can be a case in which the usage is zero but some of the LRUs are not empty. OTOH, mem_cgroup_del_lru_list(), which can be called asynchronously with rmdir, accesses the mem_cgroup, so this access can cause a problem if it races with rmdir because the mem_cgroup might have been freed by rmdir. Actually, I saw a bug which seems to be caused by this race. [1530745.949906] BUG: unable to handle kernel NULL pointer dereference at 0000000000000230 [1530745.950651] IP: [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] PGD 3863de067 PUD 3862c7067 PMD 0 [1530745.950651] Oops: 0002 [#1] SMP [1530745.950651] last sysfs file: /sys/devices/system/cpu/cpu7/cache/index1/shared_cpu_map [1530745.950651] CPU 3 [1530745.950651] Modules linked in: configs ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp nfsd nfs_acl auth_rpcgss exportfs autofs4 hidp rfcomm l2cap crc16 bluetooth lockd sunrpc ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_mirror dm_multipath scsi_dh video output sbs sbshc battery ac lp kvm_intel kvm sg ide_cd_mod cdrom serio_raw tpm_tis tpm tpm_bios acpi_memhotplug button parport_pc parport rtc_cmos rtc_core rtc_lib e1000 i2c_i801 i2c_core pcspkr dm_region_hash dm_log dm_mod ata_piix libata shpchp megaraid_mbox sd_mod scsi_mod megaraid_mm ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table] [1530745.950651] Pid: 19653, comm: shmem_test_02 Tainted: G M 2.6.32-mm1-00701-g2b04386 #3 Express5800/140Rd-4 [N8100-1065] [1530745.950651] RIP: 0010:[<ffffffff810fbc11>] [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] RSP: 0018:ffff8803863ddcb8 EFLAGS: 00010002 [1530745.950651] RAX: 00000000000001e0 RBX: ffff8803abc02238 RCX: 00000000000001e0 [1530745.950651] RDX: 0000000000000000 RSI: ffff88038611a000 RDI: ffff8803abc02238 [1530745.950651] RBP: ffff8803863ddcc8 R08: 0000000000000002 R09: ffff8803a04c8643 [1530745.950651] R10: 0000000000000000 R11: ffffffff810c7333 R12: 0000000000000000 [1530745.950651] R13: ffff880000017f00 R14: 0000000000000092 R15: ffff8800179d0310 [1530745.950651] FS: 0000000000000000(0000) GS:ffff880017800000(0000) knlGS:0000000000000000 [1530745.950651] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [1530745.950651] CR2: 0000000000000230 CR3: 0000000379d87000 CR4: 00000000000006e0 [1530745.950651] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1530745.950651] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [1530745.950651] Process shmem_test_02 (pid: 19653, threadinfo ffff8803863dc000, task ffff88038612a8a0) [1530745.950651] Stack: [1530745.950651] ffffea00040c2fe8 0000000000000000 ffff8803863ddd98 ffffffff810c739a [1530745.950651] <0> 00000000863ddd18 000000000000000c 0000000000000000 0000000000000000 [1530745.950651] <0> 0000000000000002 0000000000000000 ffff8803863ddd68 0000000000000046 [1530745.950651] Call Trace: [1530745.950651] [<ffffffff810c739a>] release_pages+0x142/0x1e7 [1530745.950651] [<ffffffff810c778f>] ? pagevec_move_tail+0x6e/0x112 [1530745.950651] [<ffffffff810c781e>] pagevec_move_tail+0xfd/0x112 [1530745.950651] [<ffffffff810c78a9>] lru_add_drain+0x76/0x94 [1530745.950651] [<ffffffff810dba0c>] exit_mmap+0x6e/0x145 [1530745.950651] [<ffffffff8103f52d>] mmput+0x5e/0xcf [1530745.950651] [<ffffffff81043ea8>] exit_mm+0x11c/0x129 [1530745.950651] [<ffffffff8108fb29>] ? audit_free+0x196/0x1c9 [1530745.950651] [<ffffffff81045353>] do_exit+0x1f5/0x6b7 [1530745.950651] [<ffffffff8106133f>] ? up_read+0x2b/0x2f [1530745.950651] [<ffffffff8137d187>] ? lockdep_sys_exit_thunk+0x35/0x67 [1530745.950651] [<ffffffff81045898>] do_group_exit+0x83/0xb0 [1530745.950651] [<ffffffff810458dc>] sys_exit_group+0x17/0x1b [1530745.950651] [<ffffffff81002c1b>] system_call_fastpath+0x16/0x1b [1530745.950651] Code: 54 53 0f 1f 44 00 00 83 3d cc 29 7c 00 00 41 89 f4 75 63 eb 4e 48 83 7b 08 00 75 04 0f 0b eb fe 48 89 df e8 18 f3 ff ff 44 89 e2 <48> ff 4c d0 50 48 8b 05 2b 2d 7c 00 48 39 43 08 74 39 48 8b 4b [1530745.950651] RIP [<ffffffff810fbc11>] mem_cgroup_del_lru_list+0x30/0x80 [1530745.950651] RSP <ffff8803863ddcb8> [1530745.950651] CR2: 0000000000000230 [1530745.950651] ---[ end trace c3419c1bb8acc34f ]--- [1530745.950651] Fixing recursive fault but reboot is needed! The problem here is pages on LRU may contain pointer to stale memcg. To make res->usage to be 0, all pages on memcg must be uncharged or moved to another(parent) memcg. Moved page_cgroup have already removed from original LRU, but uncharged page_cgroup contains pointer to memcg withou PCG_USED bit. (This asynchronous LRU work is for improving performance.) If PCG_USED bit is not set, page_cgroup will never be added to memcg's LRU. So, about pages not on LRU, they never access stale pointer. Then, what we have to take care of is page_cgroup _on_ LRU list. This patch fixes this problem by making mem_cgroup_force_empty() visit all LRUs before exiting its loop and guarantee there are no pages on its LRU. Signed-off-by:
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by:
-
Jeff Mahoney authored
Fix fixes the following warnings by renaming the driver structures to be suffixed with _driver. WARNING: drivers/virtio/virtio_balloon.o(.data+0x88): Section mismatch in reference from the variable virtio_balloon to the function .devexit.text:virtballoon_remove() WARNING: drivers/char/hw_random/virtio-rng.o(.data+0x88): Section mismatch in reference from the variable virtio_rng to the function .devexit.text:virtrng_remove() Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Acked-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
KOSAKI Motohiro authored
Commit f50de2d3 (vmscan: have kswapd sleep for a short interval and double check it should be asleep) can cause kswapd to enter an infinite loop if running on a single-CPU system. If all zones are unreclaimble, sleeping_prematurely return 1 and kswapd will call balance_pgdat() again. but it's totally meaningless, balance_pgdat() doesn't anything against unreclaimable zone! Signed-off-by:
Will Newton <will.newton@gmail.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Tested-by:
-
David John authored
The change in acpi_cpufreq to use smp_call_function_any causes a warning when it is called since the function erroneously passes the cpu id to cpumask_of_node rather than the node that the cpu is on. Fix this. cpumask_of_node(3): node > nr_node_ids(1) Pid: 1, comm: swapper Not tainted 2.6.33-rc3-00097-g2c1f1895 #223 Call Trace: [<ffffffff81028bb3>] cpumask_of_node+0x23/0x58 [<ffffffff81061f51>] smp_call_function_any+0x65/0xfa [<ffffffff810160d1>] ? do_drv_read+0x0/0x2f [<ffffffff81015fba>] get_cur_val+0xb0/0x102 [<ffffffff81016080>] get_cur_freq_on_cpu+0x74/0xc5 [<ffffffff810168a7>] acpi_cpufreq_cpu_init+0x417/0x515 [<ffffffff81562ce9>] ? __down_write+0xb/0xd [<ffffffff8148055e>] cpufreq_add_dev+0x278/0x922 Signed-off-by:
David John <davidjon@xenontk.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Roland Dreier authored
Add BUILD_BUG_ON_NOT_POWER_OF_2() When code relies on a constant being a power of 2: #define FOO 512 /* must be a power of 2 */ it would be nice to be able to do: BUILD_BUG_ON(!is_power_of_2(FOO)); However applying an inline function does not result in a compile-time constant that can be used with BUILD_BUG_ON(), so trying that gives results in: error: bit-field '<anonymous>' width not an integer constant As suggested by akpm, rather than monkeying around with is_power_of_2() and risking gcc warts about constant expressions, just create a macro BUILD_BUG_ON_NOT_POWER_OF_2() to encapsulate this common requirement. Signed-off-by:
Roland Dreier <rolandd@cisco.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: David Dillow <dave@thedillows.org> Cc: "Robert P. J. Day" <rpjday@crashcourse.ca> Signed-off-by:
-
Kazuhisa Ichikawa authored
The current check for 'backward merging' within add_active_range() does not seem correct. start_pfn must be compared against early_node_map[i].start_pfn (and NOT against .end_pfn) to find out whether the new region is backward-mergeable with the existing range. Signed-off-by:
Kazuhisa Ichikawa <ki@epsilou.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Andi Kleen authored
On my first try using them I missed that the fifos need to be power of two, resulting in a runtime bug. Document that requirement everywhere (and fix one grammar bug) Signed-off-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
Stefani Seibold <stefani@seibold.net> Cc: Roland Dreier <rdreier@cisco.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Walls <awalls@radix.net> Cc: Vikram Dhillon <dhillonv10@gmail.com> Signed-off-by:
-
Andi Kleen authored
Simple inline that checks if kfifo_init() has been executed on a fifo. This is useful for walking all per CPU fifos, when some of them might not have been brought up yet. Signed-off-by:
-
Andi Kleen authored
In some upcoming code it's useful to peek into a FIFO without permanentely removing data. This patch implements a new kfifo_out_peek() to do this. Signed-off-by:
-
Andi Kleen authored
Right now for kfifo_*_user it's not easily possible to distingush between a user copy failing and the FIFO not containing enough data. The problem is that both conditions are multiplexed into the same return code. Avoid this by moving the "copy length" into a separate output parameter and only return 0/-EFAULT in the main return value. I didn't fully adapt the weird "record" variants, those seem to be unused anyways and were rather messy (should they be just removed?) I would appreciate some double checking if I did all the conversions correctly. Signed-off-by:
-
