Pull RTC updates from Alexandre Belloni:
 "RTC subsystem update:
   - Add OF device ID table for i2c drivers

  New RTC driver:
   - Motorola CPCAP PMIC RTC

  RTC driver updates:
   - cmos: fix IRQ selection
   - ds1307: Add ST m41t0 support
   - ds1374: fix watchdog configuration
   - sh: Add rza series support"

* tag 'rtc-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
  rtc: gemini: add return value validation
  rtc: snvs: fix an incorrect check of return value
  rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL
  rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks
  rtc: sh: mark PM functions as unused
  rtc: hid-sensor-time: remove some dead code
  rtc: m41t80: Add proper compatible for rv4162
  rtc: ds1307: Add m41t0 to OF device ID table
  rtc: ds1307: support m41t0 variant
  rtc: cpcap: fix improper use of IRQ_NONE for request_threaded_irq
  rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs
  x86: i8259: export legacy_pic symbol
  dt-bindings: rtc: document the rtc-sh bindings
  rtc: sh: add support for rza series
  rtc: cpcap: kfreeing devm allocated memory
  rtc: wm8350: Remove unused to_wm8350_from_rtc_dev
  rtc: cpcap: new rtc driver
  dt-bindings: Add vendor prefix for Motorola
  rtc: omap: mark PM methods as __maybe_unused
  rtc: omap: remove incorrect __exit markups
  ...

Pull hw lockdown support from David Howells:
 "Annotation of module parameters that configure hardware resources
  including ioports, iomem addresses, irq lines and dma channels.

  This allows a future patch to prohibit the use of such module
  parameters to prevent that hardware from being abused to gain access
  to the running kernel image as part of locking the kernel down under
  UEFI secure boot conditions.

  Annotations are made by changing:

        module_param(n, t, p)
        module_param_named(n, v, t, p)
        module_param_array(n, t, m, p)

  to:

        module_param_hw(n, t, hwtype, p)
        module_param_hw_named(n, v, t, hwtype, p)
        module_param_hw_array(n, t, hwtype, m, p)

  where the module parameter refers to a hardware setting

  hwtype specifies the type of the resource being configured. This can
  be one of:

        ioport          Module parameter configures an I/O port
        iomem           Module parameter configures an I/O mem address
        ioport_or_iomem Module parameter could be either (runtime set)
        irq             Module parameter configures an I/O port
        dma             Module parameter configures a DMA channel
        dma_addr        Module parameter configures a DMA buffer address
        other           Module parameter configures some other value

  Note that the hwtype is compile checked, but not currently stored (the
  lockdown code probably won't require it). It is, however, there for
  future use.

  A bonus is that the hwtype can also be used for grepping.

  The intention is for the kernel to ignore or reject attempts to set
  annotated module parameters if lockdown is enabled. This applies to
  options passed on the boot command line, passed to insmod/modprobe or
  direct twiddling in /sys/module/ parameter files.

  The module initialisation then needs to handle the parameter not being
  set, by (1) giving an error, (2) probing for a value or (3) using a
  reasonable default.

  What I can't do is just reject a module out of hand because it may
  take a hardware setting in the module parameters. Some important
  modules, some ipmi stuff for instance, both probe for hardware and
  allow hardware to be manually specified; if the driver is aborts with
  any error, you don't get any ipmi hardware.

  Further, trying to do this entirely in the module initialisation code
  doesn't protect against sysfs twiddling.

  [!] Note that in and of itself, this series of patches should have no
      effect on the the size of the kernel or code execution - that is
      left to a patch in the next series to effect. It does mark
      annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
      an already existing field"

* tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
  Annotate hardware config module parameters in sound/pci/
  Annotate hardware config module parameters in sound/oss/
  Annotate hardware config module parameters in sound/isa/
  Annotate hardware config module parameters in sound/drivers/
  Annotate hardware config module parameters in fs/pstore/
  Annotate hardware config module parameters in drivers/watchdog/
  Annotate hardware config module parameters in drivers/video/
  Annotate hardware config module parameters in drivers/tty/
  Annotate hardware config module parameters in drivers/staging/vme/
  Annotate hardware config module parameters in drivers/staging/speakup/
  Annotate hardware config module parameters in drivers/staging/media/
  Annotate hardware config module parameters in drivers/scsi/
  Annotate hardware config module parameters in drivers/pcmcia/
  Annotate hardware config module parameters in drivers/pci/hotplug/
  Annotate hardware config module parameters in drivers/parport/
  Annotate hardware config module parameters in drivers/net/wireless/
  Annotate hardware config module parameters in drivers/net/wan/
  Annotate hardware config module parameters in drivers/net/irda/
  Annotate hardware config module parameters in drivers/net/hamradio/
  Annotate hardware config module parameters in drivers/net/ethernet/
  ...

Pull clk updates from Stephen Boyd:
 "Sort of on the quieter side this time, which is probably due more to
  me not catching up as quickly on patch review than anything else.
  Overall it seems normal though, a few small changes to the core,
  mostly small non-critical fixes here and there as well as driver
  updates for new and existing hardware support.

  The biggest things are the TI clk driver rework to lay the groundwork
  for clkctrl support in the next merge window and the AmLogic
  audio/graphics clk support.

  Core:
   - clk_possible_parents debugfs file so we know which parents a clk
     could possibly have
   - Fix to make clk rate change notifiers stop on the first failure
     instead of continuing

  New Drivers:
   - Mediatek MT6797 SoCs
   - hi655x PMIC clks
   - AmLogic Meson SoC i2s and spdif audio clks and Mali graphics clks
   - Allwinner H5 SoCs and PRCM hardware

  Updates:
   - Nvidia Tegra T210 cleanups and non-critical fixes
   - TI OMAP cleanups in preparation for clkctrl support
   - trivial fixes like kcalloc(), devm_* conversions, and seq_puts()
   - ZTE zx296718 SoC VGA clks
   - Rockchip clk-ids, fixups, and rename of rk1108 to rv1108
   - IDT VersaClock 5P49V5935 support
   - Renesas R-Car H3 and M3-W IMR clks and ES2.0 rev of R-Car H3
     support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (151 commits)
  clk: x86: pmc-atom: Checking for IS_ERR() instead of NULL
  clk: ti: divider: try to fix ti_clk_register_divider
  clk: mvebu: Use kcalloc() in two functions
  clk: mvebu: Use kcalloc() in of_cpu_clk_setup()
  clk: nomadik: Delete error messages for a failed memory allocation in two functions
  clk: nomadik: Use seq_puts() in nomadik_src_clk_show()
  clk: Improve a size determination in two functions
  clk: Replace four seq_printf() calls by seq_putc()
  clk: si5351: Delete an error message for a failed memory allocation in si5351_i2c_probe()
  clk: si5351: Use devm_kcalloc() in si5351_i2c_probe()
  clk: at91: Use kcalloc() in of_at91_clk_pll_get_characteristics()
  reset: mediatek: Add MT2701 ethsys reset controller include file
  clk: mediatek: add mt2701 ethernet reset
  clk: hi6220: Add the hi655x's pmic clock
  clk: ti: fix building without legacy omap3
  clk: ti: fix linker error with !SOC_OMAP4
  clk: hi3620: Fix a typo in one variable name
  clk: hi3620: Delete error messages for a failed memory allocation in two functions
  clk: hi3620: Use kcalloc() in hi3620_mmc_clk_init()
  clk: hisilicon: Delete error messages for failed memory allocations in hisi_clk_init()
  ...

Pull nfsd updates from Bruce Fields:
 "Another RDMA update from Chuck Lever, and a bunch of miscellaneous
  bugfixes"

* tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux: (26 commits)
  nfsd: Fix up the "supattr_exclcreat" attributes
  nfsd: encoders mustn't use unitialized values in error cases
  nfsd: fix undefined behavior in nfsd4_layout_verify
  lockd: fix lockd shutdown race
  NFSv4: Fix callback server shutdown
  SUNRPC: Refactor svc_set_num_threads()
  NFSv4.x/callback: Create the callback service through svc_create_pooled
  lockd: remove redundant check on block
  svcrdma: Clean out old XDR encoders
  svcrdma: Remove the req_map cache
  svcrdma: Remove unused RDMA Write completion handler
  svcrdma: Reduce size of sge array in struct svc_rdma_op_ctxt
  svcrdma: Clean up RPC-over-RDMA backchannel reply processing
  svcrdma: Report Write/Reply chunk overruns
  svcrdma: Clean up RDMA_ERROR path
  svcrdma: Use rdma_rw API in RPC reply path
  svcrdma: Introduce local rdma_rw API helpers
  svcrdma: Clean up svc_rdma_get_inv_rkey()
  svcrdma: Add helper to save pages under I/O
  svcrdma: Eliminate RPCRDMA_SQ_DEPTH_MULT
  ...

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable bugfixes:
   - Fix use after free in write error path
   - Use GFP_NOIO for two allocations in writeback
   - Fix a hang in OPEN related to server reboot
   - Check the result of nfs4_pnfs_ds_connect
   - Fix an rcu lock leak

  Features:
   - Removal of the unmaintained and unused OSD pNFS layout
   - Cleanup and removal of lots of unnecessary dprintk()s
   - Cleanup and removal of some memory failure paths now that GFP_NOFS
     is guaranteed to never fail.
   - Remove the v3-only data server limitation on pNFS/flexfiles

  Bugfixes:
   - RPC/RDMA connection handling bugfixes
   - Copy offload: fixes to ensure the copied data is COMMITed to disk.
   - Readdir: switch back to using the ->iterate VFS interface
   - File locking fixes from Ben Coddington
   - Various use-after-free and deadlock issues in pNFS
   - Write path bugfixes"

* tag 'nfs-for-4.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (89 commits)
  pNFS/flexfiles: Always attempt to call layoutstats when flexfiles is enabled
  NFSv4.1: Work around a Linux server bug...
  NFS append COMMIT after synchronous COPY
  NFSv4: Fix exclusive create attributes encoding
  NFSv4: Fix an rcu lock leak
  nfs: use kmap/kunmap directly
  NFS: always treat the invocation of nfs_getattr as cache hit when noac is on
  Fix nfs_client refcounting if kmalloc fails in nfs4_proc_exchange_id and nfs4_proc_async_renew
  NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION
  pNFS: Fix NULL dereference in pnfs_generic_alloc_ds_commits
  pNFS: Fix a typo in pnfs_generic_alloc_ds_commits
  pNFS: Fix a deadlock when coalescing writes and returning the layout
  pNFS: Don't clear the layout return info if there are segments to return
  pNFS: Ensure we commit the layout if it has been invalidated
  pNFS: Don't send COMMITs to the DSes if the server invalidated our layout
  pNFS/flexfiles: Fix up the ff_layout_write_pagelist failure path
  pNFS: Ensure we check layout validity before marking it for return
  NFS4.1 handle interrupted slot reuse from ERR_DELAY
  NFSv4: check return value of xdr_inline_decode
  nfs/filelayout: fix NULL pointer dereference in fl_pnfs_update_layout()
  ...

Pull metag updates from James Hogan:
 "These patches primarily make some usercopy improvements (following on
  from the recent usercopy fixes):

   - reformat and simplify rapf copy loops

   - add 64-bit get_user support

  And fix a couple more uaccess issues, partily pointed out by Al:

   - fix access_ok() serious shortcomings

   - fix strncpy_from_user() address validation

  Also included is a trivial removal of a redundant increment"

* tag 'metag-for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag/mm: Drop pointless increment
  metag/uaccess: Check access_ok in strncpy_from_user
  metag/uaccess: Fix access_ok()
  metag/usercopy: Add 64-bit get_user support
  metag/usercopy: Simplify rapf loop fixup corner case
  metag/usercopy: Reformat rapf loop inline asm

Pull virtio updates from Michael Tsirkin:
 "Fixes, cleanups, performance

  A bunch of changes to virtio, most affecting virtio net. Also ptr_ring
  batched zeroing - first of batching enhancements that seems ready."

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  s390/virtio: change maintainership
  tools/virtio: fix spelling mistake: "wakeus" -> "wakeups"
  virtio_net: tidy a couple debug statements
  ptr_ring: support testing different batching sizes
  ringtest: support test specific parameters
  ptr_ring: batch ring zeroing
  virtio: virtio_driver doc
  virtio_net: don't reset twice on XDP on/off
  virtio_net: fix support for small rings
  virtio_net: reduce alignment for buffers
  virtio_net: rework mergeable buffer handling
  virtio_net: allow specifying context for rx
  virtio: allow extra context per descriptor
  tools/virtio: fix build breakage
  virtio: add context flag to find vqs
  virtio: wrap find_vqs
  ringtest: fix an assert statement

If an NFSv4 client asks us for the supattr_exclcreat, then we must
not return attributes that are unsupported by this minor version.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fixes: 75976de6 ("NFSD: Return word2 bitmask if setting security..,")
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Pull more KVM updates from Paolo Bonzini:
 "ARM:
   - bugfixes
   - moved shared 32-bit/64-bit files to virt/kvm/arm
   - support for saving/restoring virtual ITS state to userspace

  PPC:
   - XIVE (eXternal Interrupt Virtualization Engine) support

  x86:
   - nVMX improvements, including emulated page modification logging
     (PML) which brings nice performance improvements on some workloads"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (45 commits)
  KVM: arm/arm64: vgic-its: Cleanup after failed ITT restore
  KVM: arm/arm64: Don't call map_resources when restoring ITS tables
  KVM: arm/arm64: Register ITS iodev when setting base address
  KVM: arm/arm64: Get rid of its->initialized field
  KVM: arm/arm64: Register iodevs when setting redist base and creating VCPUs
  KVM: arm/arm64: Slightly rework kvm_vgic_addr
  KVM: arm/arm64: Make vgic_v3_check_base more broadly usable
  KVM: arm/arm64: Refactor vgic_register_redist_iodevs
  KVM: Add kvm_vcpu_get_idx to get vcpu index in kvm->vcpus
  nVMX: Advertise PML to L1 hypervisor
  nVMX: Implement emulated Page Modification Logging
  kvm: x86: Add a hook for arch specific dirty logging emulation
  kvm: nVMX: Validate CR3 target count on nested VM-entry
  KVM: set no_llseek in stat_fops_per_vm
  KVM: arm/arm64: vgic: Rename kvm_vgic_vcpu_init to kvm_vgic_vcpu_enable
  KVM: arm/arm64: Clarification and relaxation to ITS save/restore ABI
  KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES
  KVM: arm64: vgic-its: Fix pending table sync
  KVM: arm64: vgic-its: ITT save and restore
  KVM: arm64: vgic-its: Device table save/restore
  ...

Pull tracing fix from Steven Rostedt:
 "This is a trivial patch that changes a check for a cpumask from a NULL
  pointer to using cpumask_available(), which will do the check. This is
  because cpumasks when not allocated are always set, and clang
  complains about it"

* tag 'trace-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Use cpumask_available() to check if cpumask variable may be used

In error cases, lgp->lg_layout_type may be out of bounds; so we
shouldn't be using it until after the check of nfserr.

This was seen to crash nfsd threads when the server receives a LAYOUTGET
request with a large layout type.

GETDEVICEINFO has the same problem.
Reported-by: Ari Kauppi <Ari.Kauppi@synopsys.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Pull TEE driver infrastructure and OP-TEE drivers from Arnd Bergmann:
 "This introduces a generic TEE framework in the kernel, to handle
  trusted environemtns (security coprocessor or software implementations
  such as OP-TEE/TrustZone). I'm sending it separately from the other
  arm-soc driver changes to give it a little more visibility, once the
  subsystem is merged, we will likely keep this in the arm₋soc drivers
  branch or have the maintainers submit pull requests directly,
  depending on the patch volume.

  I have reviewed earlier versions in the past, and have reviewed the
  latest version in person during Linaro Connect BUD17.

  Here is my overall assessment of the subsystem:

   - There is clearly demand for this, both for the generic
     infrastructure and the specific OP-TEE implementation.

   - The code has gone through a large number of reviews, and the review
     comments have all been addressed, but the reviews were not coming
     up with serious issues any more and nobody volunteered to vouch for
     the quality.

   - The user space ioctl interface is sufficient to work with the
     OP-TEE driver, and it should in principle work with other TEE
     implementations that follow the GlobalPlatform[1] standards, but it
     might need to be extended in minor ways depending on specific
     requirements of future TEE implementations

   - The main downside of the API to me is how the user space is tied to
     the TEE implementation in hardware or firmware, but uses a generic
     way to communicate with it. This seems to be an inherent problem
     with what it is trying to do, and I could not come up with any
     better solution than what is implemented here.

  For a detailed history of the patch series, see

    https://lkml.org/lkml/2017/3/10/1277"

* tag 'armsoc-tee' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: dt: hikey: Add optee node
  Documentation: tee subsystem and op-tee driver
  tee: add OP-TEE driver
  tee: generic TEE subsystem
  dt/bindings: add bindings for optee

Pull RCU updates from Ingo Molnar:
 "The main changes are:

   - Debloat RCU headers

   - Parallelize SRCU callback handling (plus overlapping patches)

   - Improve the performance of Tree SRCU on a CPU-hotplug stress test

   - Documentation updates

   - Miscellaneous fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits)
  rcu: Open-code the rcu_cblist_n_lazy_cbs() function
  rcu: Open-code the rcu_cblist_n_cbs() function
  rcu: Open-code the rcu_cblist_empty() function
  rcu: Separately compile large rcu_segcblist functions
  srcu: Debloat the <linux/rcu_segcblist.h> header
  srcu: Adjust default auto-expediting holdoff
  srcu: Specify auto-expedite holdoff time
  srcu: Expedite first synchronize_srcu() when idle
  srcu: Expedited grace periods with reduced memory contention
  srcu: Make rcutorture writer stalls print SRCU GP state
  srcu: Exact tracking of srcu_data structures containing callbacks
  srcu: Make SRCU be built by default
  srcu: Fix Kconfig botch when SRCU not selected
  rcu: Make non-preemptive schedule be Tasks RCU quiescent state
  srcu: Expedite srcu_schedule_cbs_snp() callback invocation
  srcu: Parallelize callback handling
  kvm: Move srcu_struct fields to end of struct kvm
  rcu: Fix typo in PER_RCU_NODE_PERIOD header comment
  rcu: Use true/false in assignment to bool
  rcu: Use bool value directly
  ...

Pull more ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20170303 which adds a few minor fixes and improvements, update ACPI
  SoC drivers with new device IDs, platform-related information and
  similar, fix the register information in the xpower PMIC driver,
  introduce a concept of "always present" devices to the ACPI device
  enumeration code and use it to fix a problem with one platform, and
  fix a system resume issue related to power resources.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20170303
     which includes:
      * Minor fixes and improvements in the core code (Bob Moore,
        Seunghun Han).
      * Debugger fixes (Colin Ian King, Lv Zheng).
      * Compiler/disassembler improvements (Bob Moore, David Box, Lv
        Zheng).
      * Build-related update (Lv Zheng).

   - Add new device IDs and platform-related information to the ACPI
     drivers for Intel (LPSS) and AMD (APD) SoCs (Hanjun Guo, Hans de
     Goede).

   - Make it possible to quirk ACPI-enumerated devices as "always
     present" on platforms where they are incorrectly reported as not
     present by the AML and add the INT0002 device ID to the list of
     "always present" devices (Hans de Goede).

   - Fix the register information in the xpower PMIC driver and add
     comments to map the registers to symbols used by AML to it (Hans de
     Goede).

   - Move the code turning off unused ACPI power resources during system
     resume to a point after all devices have been resumed to avoid
     issues with power resources that do not behave as expected (Hans de
     Goede)"

* tag 'acpi-extra-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
  ACPI / power: Delay turning off unused power resources after suspend
  ACPI / PMIC: xpower: Fix power_table addresses
  ACPI / LPSS: Call pwm_add_table() for Bay Trail PWM device
  ACPICA: Update version to 20170303
  ACPICA: iasl: add ASL conversion tool
  ACPICA: Local cache support: Allow small cache objects
  ACPICA: Disassembler: Do not unconditionally remove temporary names
  ACPICA: iasl: Fix IORT SMMU GSI disassembling
  ACPICA: Cleanup AML opcode definitions, no functional change
  ACPICA: Debugger: Add interpreter blocking mark for single-step mode
  ACPICA: debugger: fix memory leak on Pathname
  ACPICA: Update for automatic repair code for objects returned by evaluate_object
  ACPICA: Namespace: fix operand cache leak
  ACPICA: Fix several incorrect invocations of ACPICA return macro
  ACPICA: Fix a module for excessive debug output
  ACPICA: Update some function headers, no funtional change
  ACPICA: Disassembler: Enhance resource descriptor detection
  i2c: designware: Add ACPI HID for Hisilicon Hip07/08 I2C controller
  ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller
  ACPI / bus: Add INT0002 to list of always-present devices
  ...

Pull more power management updates from Rafael Wysocki:
 "These add new CPU IDs to a couple of drivers, fix a possible NULL
  pointer dereference in the cpuidle core, update DT-related things in
  the generic power domains framework and finally update the
  suspend/resume infrastructure to improve the handling of wakeups from
  suspend-to-idle.

  Specifics:

   - Add Intel Gemini Lake CPU IDs to the intel_idle and intel_rapl
     drivers (David Box).

   - Add a NULL pointer check to the cpuidle core to prevent it from
     crashing on platforms with incomplete cpuidle configuration (Fei
     Li).

   - Fix DT-related documentation in the generic power domains (genpd)
     framework and add a MAINTAINERS entry for DT-related material in
     genpd (Viresh Kumar).

   - Update the system suspend/resume infrastructure to improve the
     handling of aborts of suspend transitions in progress in the wakeup
     framework and rework the suspend-to-idle core loop to make it
     possible to filter out spurious wakeup events (specifically the
     ones coming from ACPI) without resuming all the way up to user
     space every time (Rafael Wysocki)"

* tag 'pm-extra-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle
  PM / wakeup: Integrate mechanism to abort transitions in progress
  x86/intel_idle: add Gemini Lake support
  cpuidle: check dev before usage in cpuidle_use_deepest_state()
  powercap: intel_rapl: Add support for Gemini Lake
  PM / Domains: Add DT file to MAINTAINERS
  PM / Domains: Fix DT example

Pull overlayfs update from Miklos Szeredi:
 "The biggest part of this is making st_dev/st_ino on the overlay behave
  like a normal filesystem (i.e. st_ino doesn't change on copy up,
  st_dev is the same for all files and directories). Currently this only
  works if all layers are on the same filesystem, but future work will
  move the general case towards more sane behavior.

  There are also miscellaneous fixes, including fixes to handling
  append-only files. There's a small change in the VFS, but that only
  has an effect on overlayfs, since otherwise file->f_path.dentry->inode
  and file_inode(file) are always the same"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: update documentation w.r.t. constant inode numbers
  ovl: persistent inode numbers for upper hardlinks
  ovl: merge getattr for dir and nondir
  ovl: constant st_ino/st_dev across copy up
  ovl: persistent inode number for directories
  ovl: set the ORIGIN type flag
  ovl: lookup non-dir copy-up-origin by file handle
  ovl: use an auxiliary var for overlay root entry
  ovl: store file handle of lower inode on copy up
  ovl: check if all layers are on the same fs
  ovl: do not set overlay.opaque on non-dir create
  ovl: check IS_APPEND() on real upper inode
  vfs: ftruncate check IS_APPEND() on real upper inode
  ovl: Use designated initializers
  ovl: lockdep annotate of nested stacked overlayfs inode lock

Pull fuse updates from Miklos Szeredi:
 "Support for pid namespaces from Seth and refcount_t work from Elena"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: Add support for pid namespaces
  fuse: convert fuse_conn.count from atomic_t to refcount_t
  fuse: convert fuse_req.count from atomic_t to refcount_t
  fuse: convert fuse_file.count from atomic_t to refcount_t

Pull ceph updates from Ilya Dryomov:
 "The two main items are support for disabling automatic rbd exclusive
  lock transfers from myself and the long awaited -ENOSPC handling
  series from Jeff.

  The former will allow rbd users to take advantage of exclusive lock's
  built-in blacklist/break-lock functionality while staying in control
  of who owns the lock. With the latter in place, we will abort
  filesystem writes on -ENOSPC instead of having them block
  indefinitely.

  Beyond that we've got the usual pile of filesystem fixes from Zheng,
  some refcount_t conversion patches from Elena and a patch for an
  ancient open() flags handling bug from Alexander"

* tag 'ceph-for-4.12-rc1' of git://github.com/ceph/ceph-client: (31 commits)
  ceph: fix memory leak in __ceph_setxattr()
  ceph: fix file open flags on ppc64
  ceph: choose readdir frag based on previous readdir reply
  rbd: exclusive map option
  rbd: return ResponseMessage result from rbd_handle_request_lock()
  rbd: kill rbd_is_lock_supported()
  rbd: support updating the lock cookie without releasing the lock
  rbd: store lock cookie
  rbd: ignore unlock errors
  rbd: fix error handling around rbd_init_disk()
  rbd: move rbd_unregister_watch() call into rbd_dev_image_release()
  rbd: move rbd_dev_destroy() call out of rbd_dev_image_release()
  ceph: when seeing write errors on an inode, switch to sync writes
  Revert "ceph: SetPageError() for writeback pages if writepages fails"
  ceph: handle epoch barriers in cap messages
  libceph: add an epoch_barrier field to struct ceph_osd_client
  libceph: abort already submitted but abortable requests when map or pool goes full
  libceph: allow requests to return immediately on full conditions if caller wishes
  libceph: remove req->r_replay_version
  ceph: make seeky readdir more efficient
  ...

Pull btrfs updates from Chris Mason:
 "This has fixes and cleanups Dave Sterba collected for the merge
  window.

  The biggest functional fixes are between btrfs raid5/6 and scrub, and
  raid5/6 and device replacement. Some of our pending qgroup fixes are
  included as well while I bash on the rest in testing.

  We also have the usual set of cleanups, including one that makes
  __btrfs_map_block() much more maintainable, and conversions from
  atomic_t to refcount_t"

* 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (71 commits)
  btrfs: fix the gfp_mask for the reada_zones radix tree
  Btrfs: fix reported number of inode blocks
  Btrfs: send, fix file hole not being preserved due to inline extent
  Btrfs: fix extent map leak during fallocate error path
  Btrfs: fix incorrect space accounting after failure to insert inline extent
  Btrfs: fix invalid attempt to free reserved space on failure to cow range
  btrfs: Handle delalloc error correctly to avoid ordered extent hang
  btrfs: Fix metadata underflow caused by btrfs_reloc_clone_csum error
  btrfs: check if the device is flush capable
  btrfs: delete unused member nobarriers
  btrfs: scrub: Fix RAID56 recovery race condition
  btrfs: scrub: Introduce full stripe lock for RAID56
  btrfs: Use ktime_get_real_ts for root ctime
  Btrfs: handle only applicable errors returned by btrfs_get_extent
  btrfs: qgroup: Fix qgroup corruption caused by inode_cache mount option
  btrfs: use q which is already obtained from bdev_get_queue
  Btrfs: switch to div64_u64 if with a u64 divisor
  Btrfs: update scrub_parity to use u64 stripe_len
  Btrfs: enable repair during read for raid56 profile
  btrfs: use clear_page where appropriate
  ...

Pull IDE updates from David Miller:
 "Two small cleanups in the IDE layer"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: don't call memcpy with the same source and destination
  ide: use setup_timer

Pull sparc updates from David Miller:
 "sparc changes, including a bug fix for handling exceptions during
  bzero on some sparc64 cpus"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: fix fault handling in NGbzero.S and GENbzero.S
  sparc: use memdup_user_nul in sun4m LED driver
  sparc: Remove redundant tests in boot_flags_init().

Pull networking fixes from David Miller:

 1) Fix multiqueue in stmmac driver on PCI, from Andy Shevchenko.

 2) cdc_ncm doesn't actually fully zero out the padding area is
    allocates on TX, from Jim Baxter.

 3) Don't leak map addresses in BPF verifier, from Daniel Borkmann.

 4) If we randomize TCP timestamps, we have to do it everywhere
    including SYN cookies. From Eric Dumazet.

 5) Fix "ethtool -S" crash in aquantia driver, from Pavel Belous.

 6) Fix allocation size for ntp filter bitmap in bnxt_en driver, from
    Dan Carpenter.

 7) Add missing memory allocation return value check to DSA loop driver,
    from Christophe Jaillet.

 8) Fix XDP leak on driver unload in qed driver, from Suddarsana Reddy
    Kalluru.

 9) Don't inherit MC list from parent inet connection sockets, another
    syzkaller spotted gem. Fix from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  dccp/tcp: do not inherit mc_list from parent
  qede: Split PF/VF ndos.
  qed: Correct doorbell configuration for !4Kb pages
  qed: Tell QM the number of tasks
  qed: Fix VF removal sequence
  qede: Fix XDP memory leak on unload
  net/mlx4_core: Reduce harmless SRIOV error message to debug level
  net/mlx4_en: Avoid adding steering rules with invalid ring
  net/mlx4_en: Change the error print to debug print
  drivers: net: wimax: i2400m: i2400m-usb: Use time_after for time comparison
  DECnet: Use container_of() for embedded struct
  Revert "ipv4: restore rt->fi for reference counting"
  net: mdio-mux: bcm-iproc: call mdiobus_free() in error path
  net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control
  ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf
  net: cdc_ncm: Fix TX zero padding
  stmmac: pci: split out common_default_data() helper
  stmmac: pci: RX queue routing configuration
  stmmac: pci: TX and RX queue priority configuration
  stmmac: pci: set default number of rx and tx queues
  ...

Pull dmaengine updates from Vinod Koul:
 "This time again a smaller update consisting of:

   - support for TI DA8xx dma controller and updates to the cppi driver

   - updates on bunch of drivers like xilinx, pl08x, stm32-dma, mv_xor,
     ioat, dmatest"

* tag 'dmaengine-4.12-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (35 commits)
  dmaengine: pl08x: remove lock documentation
  dmaengine: pl08x: fix pl08x_dma_chan_state documentation
  dmaengine: pl08x: Use the BIT() macro consistently
  dmaengine: pl080: Fix some missing kerneldoc
  dmaengine: pl080: Cut some unused defines
  dmaengine: dmatest: Add check for supported buffer count (sg_buffers)
  dmaengine: dmatest: Select DMA_ENGINE_RAID as its needed for the slave_sg test
  dmaengine: virt-dma: Convert to use list_for_each_entry_safe()
  dma-debug: use offset_in_page() macro
  dmaengine: mv_xor: use offset_in_page() macro
  dmaengine: dmatest: use offset_in_page() macro
  dmaengine: sun4i: fix invalid argument
  dmaengine: ioat: use setup_timer
  dmaengine: cppi41: Fix an Oops happening in cppi41_dma_probe()
  dmaengine: pl330: remove pdata based initialization
  dmaengine: cppi: fix build error due to bad variable
  dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped
  dmaengine: cppi41: use managed functions devm_*()
  dmaengine: cppi41: fix cppi41_dma_tx_status() logic
  dmaengine: qcom_hidma: pause the channel on shutdown
  ...

Merge tag 'pwm/for-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "Adds a new driver for the PWM controller found on MediaTek SoCs and
  extends support for the Atmel PWM controller to include the SAMA5D2.

  Some existing drivers have been migrated to the atomic API and a few
  others see miscellaneous improvements"

* tag 'pwm/for-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: tegra: Read PWM clock source rate in driver init
  pwm: pca9685: Fix GPIO-only operation
  pwm: mediatek: Don't explicitly set .owner
  pwm: tegra: Avoid potential overflow for short periods
  pwm: tegra: Add support to configure pin state in suspends/resume
  pwm: tegra: Add DT binding details to configure pin in suspends/resume
  pwm: tegra: Increase precision in PWM rate calculation
  pwm: tegra: Use DIV_ROUND_CLOSEST_ULL() instead of local implementation
  pwm: Add MediaTek PWM support
  dt-bindings: pwm: Add MediaTek PWM bindings
  pwm: atmel: Enable PWM on sama5d2
  pwm: atmel: Switch to atomic PWM
  pwm: atmel-hlcdc: Implement the suspend/resume hooks
  pwm: atmel-hlcdc: Convert to the atomic PWM API

Pull IOMMU updates from Joerg Roedel:

 - code optimizations for the Intel VT-d driver

 - ability to switch off a previously enabled Intel IOMMU

 - support for 'struct iommu_device' for OMAP, Rockchip and Mediatek
   IOMMUs

 - header optimizations for IOMMU core code headers and a few fixes that
   became necessary in other parts of the kernel because of that

 - ACPI/IORT updates and fixes

 - Exynos IOMMU optimizations

 - updates for the IOMMU dma-api code to bring it closer to use per-cpu
   iova caches

 - new command-line option to set default domain type allocated by the
   iommu core code

 - another command line option to allow the Intel IOMMU switched off in
   a tboot environment

 - ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an
   IDENTITY domain in conjunction with DMA ops, Support for SMR masking,
   Support for 16-bit ASIDs (was previously broken)

 - various other small fixes and improvements

* tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits)
  soc/qbman: Move dma-mapping.h include to qman_priv.h
  soc/qbman: Fix implicit header dependency now causing build fails
  iommu: Remove trace-events include from iommu.h
  iommu: Remove pci.h include from trace/events/iommu.h
  arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops()
  ACPI/IORT: Fix CONFIG_IOMMU_API dependency
  iommu/vt-d: Don't print the failure message when booting non-kdump kernel
  iommu: Move report_iommu_fault() to iommu.c
  iommu: Include device.h in iommu.h
  x86, iommu/vt-d: Add an option to disable Intel IOMMU force on
  iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed
  iommu/arm-smmu: Correct sid to mask
  iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid()
  iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code
  omap3isp: Remove iommu_group related code
  iommu/omap: Add iommu-group support
  iommu/omap: Make use of 'struct iommu_device'
  iommu/omap: Store iommu_dev pointer in arch_data
  iommu/omap: Move data structures to omap-iommu.h
  iommu/omap: Drop legacy-style device support
  ...

* acpi-soc:
  ACPI / LPSS: Call pwm_add_table() for Bay Trail PWM device
  i2c: designware: Add ACPI HID for Hisilicon Hip07/08 I2C controller
  ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller

* acpi-bus:
  ACPI / bus: Add INT0002 to list of always-present devices
  ACPI / bus: Introduce a list of ids for "always present" devices

* acpi-pmic:
  ACPI / PMIC: xpower: Fix power_table addresses

* acpi-power:
  ACPI / power: Delay turning off unused power resources after suspend

* acpica:
  ACPICA: Update version to 20170303
  ACPICA: iasl: add ASL conversion tool
  ACPICA: Local cache support: Allow small cache objects
  ACPICA: Disassembler: Do not unconditionally remove temporary names
  ACPICA: iasl: Fix IORT SMMU GSI disassembling
  ACPICA: Cleanup AML opcode definitions, no functional change
  ACPICA: Debugger: Add interpreter blocking mark for single-step mode
  ACPICA: debugger: fix memory leak on Pathname
  ACPICA: Update for automatic repair code for objects returned by evaluate_object
  ACPICA: Namespace: fix operand cache leak
  ACPICA: Fix several incorrect invocations of ACPICA return macro
  ACPICA: Fix a module for excessive debug output
  ACPICA: Update some function headers, no funtional change
  ACPICA: Disassembler: Enhance resource descriptor detection
  ACPICA: Add non-linux host build support

* pm-domains:
  PM / Domains: Add DT file to MAINTAINERS
  PM / Domains: Fix DT example

* pm-cpuidle:
  x86/intel_idle: add Gemini Lake support
  cpuidle: check dev before usage in cpuidle_use_deepest_state()

* pm-sleep:
  ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle
  PM / wakeup: Integrate mechanism to abort transitions in progress

* powercap:
  powercap: intel_rapl: Add support for Gemini Lake

  UBSAN: Undefined behaviour in fs/nfsd/nfs4proc.c:1262:34
  shift exponent 128 is too large for 32-bit type 'int'

Depending on compiler+architecture, this may cause the check for
layout_type to succeed for overly large values (which seems to be the
case with amd64). The large value will be later used in de-referencing
nfsd4_layout_ops for function pointers.
Reported-by: Jani Tuovila <tuovila@synopsys.com>
Signed-off-by: Ari Kauppi <ari@synopsys.com>
[colin.king@canonical.com: use LAYOUT_TYPE_MAX instead of 32]
Cc: stable@vger.kernel.org
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Layoutstats is always desirable when using the flexfiles driver, so
we should enable it if that driver is being loaded. It is safe to do
so, because even when the mount specifies NFSv4.1, we will turn it
off if the server tells us it is unsupported.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

It turns out the Linux server has a bug in its implementation of
supattr_exclcreat; it returns the set of all attributes, whether
or not they are supported by minor version 1.
In order to avoid a regression, we therefore apply the supported_attrs
as a mask on top of whatever the server sent us.
Reported-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

syzkaller found a way to trigger double frees from ip_mc_drop_socket()

It turns out that leave a copy of parent mc_list at accept() time,
which is very bad.

Very similar to commit 8b485ce6 ("tcp: do not inherit
fastopen_req from parent")

Initial report from Pray3r, completed by Andrey one.
Thanks a lot to them !
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Pray3r <pray3r.z@gmail.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When any of the functions contained in NGbzero.S and GENbzero.S
vector through *bzero_from_clear_user, we may end up taking a
fault when executing one of the store alternate address space
instructions. If this happens, the exception handler does not
restore the %asi register.

This commit fixes the issue by introducing a new exception
handler that ensures the %asi register is restored when
a fault is handled.

Orabug: 25577560
Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com>
Reviewed-by: Rob Gardner <rob.gardner@oracle.com>
Reviewed-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use memdup_user_nul() helper instead of open-coding to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ARC updates from Vineet Gupta:

 - AXS10x platform clk updates for I2S, PGU

 - add region based cache flush operation for ARCv2 cores

 - enforce PAE40 dependency on HIGHMEM

 - ptrace support for additional regs in ARCv2 cores

 - fix build failure in linux-next dut to a header include ordering
   change

* tag 'arc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  Revert "ARCv2: Allow enabling PAE40 w/o HIGHMEM"
  ARC: mm: fix build failure in linux-next for UP builds
  ARCv2: ptrace: provide regset for accumulator/r30 regs
  elf: Add ARCv2 specific core note section
  ARCv2: mm: micro-optimize region flush generated code
  ARCv2: mm: Merge 2 updates to DC_CTRL for region flush
  ARCv2: mm: Implement cache region flush operations
  ARC: mm: Move full_page computation into cache version agnostic wrapper
  arc: axs10x: Fix ARC PGU default clock frequency
  arc: axs10x: Add DT bindings for I2S audio playback

Pull ARM 64-bit DT updates from Olof Johansson:
 "Device-tree updates for arm64 platforms. Just as with 32-bit, a bunch
  of smaller changes, but also some new platforms that are worth
  mentioning:

   - Rockchip RK3399 platforms for Chromebooks, including Samsung
     Chromebook Plus (Kevin)

   - Orange Pi PC2 (Allwinner H5)

   - Freescale LS2088A and LS1088A SoCs

   - Expanded support for Nvidia Tegra186 (and Jetson TX2)"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (180 commits)
  arm64: dts: Add basic DT to support Spreadtrum's SP9860G
  arm64: dts: exynos: Use - instead of @ for DT OPP entries
  arm64: dts: exynos: Add support for s6e3hf2 panel device on TM2e board
  arm64: dts: juno: add information about L1 and L2 caches
  arm64: dts: juno: fix few unit address format warnings
  arm64: marvell: dts: enable the crypto engine on the Armada 8040 DB
  arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB
  arm64: marvell: dts: add crypto engine description for 7k/8k
  arm64: dts: marvell: add sdhci support for Armada 7K/8K
  arm64: dts: marvell: add eMMC support for Armada 37xx
  arm64: dts: hisi: add pinctrl dtsi file for HiKey960 development board
  arm64: dts: hisi: add drive strength levels of the pins for Hi3660 SoC
  arm64: dts: hisi: enable the NIC and SAS for the hip07-d05 board
  arm64: dts: hisi: add SAS nodes for the hip07 SoC
  arm64: dts: hisi: add RoCE nodes for the hip07 SoC
  arm64: dts: hisi: add network related nodes for the hip07 SoC
  arm64: dts: hisi: add mbigen nodes for the hip07 SoC
  arm64: dts: rockchip: fix the memory size of PX5 Evaluation board
  arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board
  dt-bindings: arm: hisilicon: add bindings for hi3798cv200 SoC and Poplar board
  ...

Pull ARM SoC 64-bit changes from Olof Johansson:
 "Changes to platform code for 64-bit ARM platforms.

  Most of these are small changes to the one defconfig we use on arm64
  (no per-platform configs there), to enable new drivers.

  There are also a few other changes. Broadcom sold off their 'Vulcan'
  design to Cavium, where it is now called ThunderX2. While we normally
  don't rename stuff based on marketing's whims, it seemed appropriate
  to bring in renames on a few things such as MAINTAINERS, etc"

* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: sunxi: always enable reset controller
  arm64: defconfig: enable the Safexcel crypto engine as a module
  arm64: configs: enable SDHCI driver for Xenon
  MAINTAINERS: Broadcom Vulcan is now Cavium ThunderX2
  arm64: defconfig: add Allwinner USB PHY
  arm64: defconfig: enable MVPP2
  arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7
  arm64: exynos: Enable Exynos PMU and PM domains drivers
  arm64: only select PINCTRL for Allwinner platforms
  arm64: set CONFIG_MMC_BCM2835=y in defconfig
  arm64: defconfig: enable I2C_PXA
  arm64: defconfig: enable MVNETA
  ARM64: defconfig: enable the leds-pwm driver and default-on trigger
  arm64: defconfig: Enable SH Mobile I2C controller

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs:

  Reset subsystem, merged through arm-soc by tradition:
   - Make bool drivers explicitly non-modular
   - New support for i.MX7 and Arria10 reset controllers

  PATA driver for Palmchip BK371 (acked by Tejun)

  Power domain drivers for i.MX (GPC, GPCv2)
   - Moved out of mach-imx for GPC
   - Bunch of tweaks, fixes, etc

  PMC support for Tegra186

  SoC detection support for Renesas RZ/G1H and RZ/G1N

  Move Tegra flow controller driver from mach directory to drivers/soc
   - (Power management / CPU power driver)

  Misc smaller tweaks for other platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  soc: pm-domain: Fix the mangled urls
  soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0
  soc: renesas: rcar-sysc: Add support for fixing up power area tables
  soc: renesas: Register SoC device early
  soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver
  dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible
  soc: imx: gpc: add defines for domain index
  soc: imx: Add GPCv2 power gating driver
  dt-bindings: Add GPCv2 power gating driver
  ARM/clk: move the ICST library to drivers/clk
  ARM: plat-versatile: remove stale clock header
  ARM: keystone: Drop PM domain support for k2g
  soc: ti: Add ti_sci_pm_domains driver
  dt-bindings: Add TI SCI PM Domains
  PM / Domains: Do not check if simple providers have phandle cells
  PM / Domains: Add generic data pointer to genpd data struct
  soc/tegra: Add initial flowctrl support for Tegra132/210
  soc/tegra: flowctrl: Add basic platform driver
  soc/tegra: Move Tegra flowctrl driver
  ARM: tegra: Remove unnecessary inclusion of flowctrl header
  ...

Pull ARM: SoC defconfig updates from Olof Johansson:
 "We've traditionally kept defconfig updates in a separate branch, often
  to encourage submaintainers to handle those patches separately to
  avoid conflicts on the shared files. The amount of changes seem to be
  decreasing though, so we might rethink how we handle this going
  forward.

  There really isn't much to write about here. The bulk of changes here
  are enabling drivers for whatever platforms the hardware is found on
  (and multi-configs)"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits)
  multi_v7_defconfig: make Rockchip usb2-phy built-in
  ARM: omap2plus_defconfig: Enable droid 4 devices
  ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules
  ARM: configs: aspeed: Add new drivers
  ARM: configs: aspeed: Update configs for BMC systems
  ARM: omap2plus_defconfig: Enable TI Ethernet PHY
  ARM: configs: Add new config fragment to change RAM start point
  ARM: configs: stm32: Add I2C support
  multi_v7_defconfig: make Rockchip DRM drivers built-in
  ARM: configs: stm32: Set CPU_V7M_NUM_IRQ to max value
  ARM: imx_v6_v7_defconfig: Select SMSC_PHY
  ARM: davinci_all_defconfig: convert to use libata PATA
  ARM: qcom_defconfig: Enable Qualcomm remoteproc and related drivers
  ARM: omap2plus_defconfig: enable ahci-dm816 module
  arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and multi_v7_defconfig
  ARM: bcm2835: Enable missing CMA settings for VC4 driver
  ARM: socfpga: updates for socfpga_defconfig
  ARM: imx_v6_v7_defconfig: Select hid-multitouchdriver
  ARM: imx_v6_v7_defconfig: Select max11801_ts touchscreen driver
  ARM: exynos_defconfig: Increase CONFIG_CMA_SIZE_MBYTES to 96
  ...

Pull ARM Device-tree updates from Olof Johansson:
 "Device-tree continues to see lots of updates. The majority of patches
  here are smaller changes for new hardware on existing platforms, and
  there are a few larger changes worth pointing out.

  Major new platforms:

   - Gemini has been ported to DT, so a handful of "new" platforms moved
     over from board files

   - Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288
     SoM and RDK

   - A bunch of embedded platforms, several Linksys platforms, Synology
     DS116,

   - Motorola Droid4 (really old OMAP-based phone) support is added.

  Some refactorings, i.e. Allwinner H3/H5 support is commonalized.

  And lots of smaller changes, cleanups, etc. See shortlog for more
  description

  We're adding ability to cross-include DT files between arm and arm64,
  by creating appropriate links in the dt-include directory, and using
  arm/ and arm64/ as include prefixes. This will avoid other local hacks
  such as per-file links between the two arch trees (this broke for
  external mirroring of DT contents). Now they can just provide their
  own appropriate dt-include hierarcy per platform"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits)
  ARM: dts: exynos: Use - instead of @ for DT OPP entries
  arm: spear6xx: add DT description of the ADC on SPEAr600
  arm: spear6xx: remove unneeded pinctrl properties in spear600-evb
  arm: spear6xx: switch spear600-evb to the new flash partition DT binding
  arm: spear6xx: fix spaces in spear600-evb.dts
  arm: spear6xx: use node labels in spear600-evb.dts
  arm: spear6xx: add labels to various nodes in spear600.dtsi
  ARM: dts: vexpress: fix few unit address format warnings
  ARM: dts: at91: sama5d3_xplained: not all ADC channels are available
  ARM: dts: at91: sama5d3_xplained: fix ADC vref
  ARM: dts: at91: add envelope detector mux to the Axentia TSE-850
  ARM: dts: armada-38x: label USB and SATA nodes
  ARM: dts: imx6q-utilite-pro: add hpd gpio
  ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
  ARM: dts: imx6qdl-sabresd: Set LDO regulator supply
  ARM: dts: imx: add Gateworks Ventana GW5903 support
  ARM: dts: i.MX25: add AIPS control registers
  ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators
  ARM: dts: imx7-colibri: remove 1.8V fixed regulator
  ARM: dts: imx7-colibri: allow to disable Ethernet rail
  ...