- 17 Jul, 2015 23 commits
-
-
Jiang Liu authored
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Signed-off-by:
Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and update was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Thomas Gleixner authored
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by:
-
Thomas Gleixner authored
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by:
-
Timur Tabi authored
Add the pinctrl driver for the Qualcomm Technologies QDF2xxx ARM64 SoCs, which uses the Qualcomm Technologies TLMM pinctrl/gpio device. This driver is probed via ACPI and uses the pinctrl-msm.c backend driver. This driver is intended to be used only an ACPI-enabled system. As such, UEFI will handle all pin control configuration, so this driver does not provide pin control functions. It is effectively a GPIO-only driver. Signed-off-by:
Timur Tabi <timur@codeaurora.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Bjorn Andersson authored
This introduces pinctrl drivers for gpio and mpp blocks found in family A PMICs. Tested-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Bjorn Andersson authored
The "function" of the MPP driver was inherited from the GPIO driver, but the differences between the two hardware blocks makes both the driver and the device tree binding to be awkward. Instead of overloading the "normal" function with various modes this patch transposes the pinmux function to represent the three operating modes of the MPP (digital, analog and current sink). The properties of pin pairing and DTEST routing is moved to separate properties. Signed-off-by:
-
Bjorn Andersson authored
When the MPP is configured for analog output the output level is selected by the AOUT_CTL register, this patch makes it possible to control this. Signed-off-by:
-
Joachim Eastwood authored
The dedicated USB1 pins can be configured with pull-down and for low power mode (suspend). Add support for this in the pinctrl driver. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
-
Jon Hunter authored
The function pinconf_dbg_config_print() only prints the configuration of the 1st pin config in an array of pin configurations. Fix this so that all pin configurations in the array are displayed. There are a few places in the code where the pin configs are displayed and so add a helper function to display the pin configs to simplify the code. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
-
Jon Hunter authored
The function pinconf_dbg_config_write() currently only supports configuring a pin configuration mapping via the debugfs. Allow group mappings to also be configured via the debugfs. Signed-off-by:
-
Stephen Boyd authored
Assign pm_power_off() if we have the PS_HOLD functionality so that we can properly shutdown the SoC. Otherwise, shutdown won't do anything besides put the CPU into a tight loop. Unfortunately, we have to use a singleton here because pm_power_off() doesn't take any arguments. Fortunately there's only one instance of the pinctrl device on a running system so this isn't a problem. Cc: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Acked-by:
-
- 16 Jul, 2015 17 commits
-
-
Krzysztof Kozlowski authored
platform_driver does not need to set an owner because platform_driver_register() will set it. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Grygorii Strashko authored
On DRA7 there is one pinctrl domain (dra7_pmx_core) and PRCM wake-up IRQ is not shared, so remove quirk. Cc: Nishanth Menon <nm@ti.com> Fixes: 31320bea ('pinctrl: single: Add DRA7 pinctrl compatibility') Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Acked-by:
Tero Kristo <t-kristo@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Geert Uytterhoeven authored
Since the removal of the r8a7740 legacy SoC code in commit 44d88c75 ("ARM: shmobile: Remove legacy SoC code for R-Mobile A1"), r8a7740 is only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Geert Uytterhoeven authored
Since the removal of the r8a7740 legacy SoC code in commit 44d88c75 ("ARM: shmobile: Remove legacy SoC code for R-Mobile A1"), r8a7740 is only supported in generic ARM multi-platform builds. Hence CONFIG_ARCH_MULTIPLATFORM is always set, and the check can be removed. Signed-off-by:
-
Geert Uytterhoeven authored
Since the removal of the sh73a0 legacy SoC code in commit 9a986398 ("ARM: shmobile: Remove legacy SoC code for SH-Mobile AG5"), sh73a0 is only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by:
-
Geert Uytterhoeven authored
Since the removal of the sh73a0 legacy SoC code in commit 9a986398 ("ARM: shmobile: Remove legacy SoC code for SH-Mobile AG5"), sh73a0 is only supported in generic ARM multi-platform builds. Hence CONFIG_ARCH_MULTIPLATFORM is always set, and the check can be removed. Signed-off-by:
-
Geert Uytterhoeven authored
If the pin function controller (which can be a GPIO controller) is instantiated before the interrupt controllers, due to the ordering in the DTS, the irq domains for the interrupt controllers referenced by its "interrupts-extended" property cannot be found yet: irq: no irq domain found for /interrupt-controller@e61c0000 ! As the sh-pfc driver accesses the platform device's resources directly, it cannot find the (optional) IRQ resources, and thinks no interrupts are available. This may lead to failures later, when GPIOs are used as interupts: gpio-keys keyboard: Unable to claim irq 0; error -22 gpio-keys: probe of keyboard failed with error -22 To fix this, add support for deferred probing to sh-pfc, by converting the driver from direct platform device resource access to using the platform_get_resource() and platform_get_irq() helpers. Note that while this fixes the root cause worked around by commit e4ba0a9b ("ARM: shmobile: r8a73a4: Move pfc node to work around probe ordering bug"), I strongly recommend against reverting the workaround now, as this would lead to lots of probe deferrals in drivers relying on pinctrl. This may be reconsidered once the DT code starts taking into account phandle dependencies during device instantation. Signed-off-by: -
Laurent Pinchart authored
The "function", "pins" and "groups" pinmux and pinctrl properties have been standardized. Support them in addition to the custom "renesas,*" properties. New-style and old-style properties can't be mixed in DT. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Dan Carpenter authored
Checkpatch.pl complains about these: WARNING: Possible unnecessary 'out of memory' message The messages use a little extra RAM and they add a few extra lines of code. We're probably never going to hit these out of memory situations but if we did then kmalloc() has pretty good error messages built-in. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Dan Carpenter authored
We were allocating enough space because sizeof("-grp") and sizeof("-mux") are both equal to 5 but in the snprintf() we only allowed for 4 characters so the last 'p' and 'x' characters were truncated. The allocate and sprintf can be done in one step with the kasprintf(). Signed-off-by: -
Masahiro Yamada authored
Kbuild should descend into drivers/pinctrl/ only when CONFIG_PINCTRL is enabled because everything under that directory depends on CONFIG_PINCTRL. We can avoid the conditional, ifeq ($(CONFIG_OF),y) ... endif. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Masahiro Yamada authored
Add pin configuration and pinmux support for UniPhier PH1-LD6b SoC. Changes in v2: - sort groups and funcs alphabetically - add i2c pin-mux settings - sort members of platform_driver - change to tristate - add THIS_MODULE to pinctrl_desc - use module_platform_driver Signed-off-by:
-
Masahiro Yamada authored
Add pin configuration and pinmux support for UniPhier ProXstream2 SoC. Changes in v2: - sort groups and funcs alphabetically - add i2c pin-mux settings - sort members of platform_driver - change to tristate - add THIS_MODULE to pinctrl_desc - use module_platform_driver Signed-off-by:
-
Masahiro Yamada authored
Add pin configuration and pinmux support for UniPhier PH1-Pro5 SoC. Changes in v2: - sort groups and funcs alphabetically - add i2c pin-mux settings - sort members of platform_driver - change to tristate - add THIS_MODULE to pinctrl_desc - use module_platform_driver Signed-off-by:
-
Masahiro Yamada authored
Add pin configuration and pinmux support for UniPhier PH1-sLD8 SoC. Changes in v2: - sort groups and funcs alphabetically - add i2c pin-mux settings - sort members of platform_driver - change to tristate - add THIS_MODULE to pinctrl_desc - use module_platform_driver Signed-off-by:
-
Masahiro Yamada authored
Add pin configuration and pinmux support for UniPhier PH1-Pro4 SoC. Changes in v2: - sort groups and funcs alphabetically - add i2c pin-mux settings - sort members of platform_driver - change to tristate - add THIS_MODULE to pinctrl_desc - use module_platform_driver Signed-off-by:
-
Masahiro Yamada authored
Add pin configuration and pinmux support for UniPhier PH1-LD4 SoC. Changes in v2: - sort groups and funcs alphabetically - add missing "emmc_dat8" group - add i2c pin-mux settings - sort members of platform_driver - change to tristate - add THIS_MODULE to pinctrl_desc - use module_platform_driver Signed-off-by:
-
