- 06 Mar, 2017 33 commits
-
-
David Matlack authored
[ Upstream commit b6416e61 ] Modules that use static_key_deferred need a way to synchronize with any delayed work that is still pending when the module is unloaded. Introduce static_key_deferred_flush() which flushes any pending jump label updates. Signed-off-by:
David Matlack <dmatlack@google.com> Cc: stable@vger.kernel.org Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
Stefan Wahren authored
[ Upstream commit 01167c7b ] According to the code the intention is to append 8 SCK cycles instead of 4 at end of a MMC_STOP_TRANSMISSION command. But this will never happened because it's an AC command not an ADTC command. So fix this by moving the statement into the right function. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: e4243f13 (mmc: mxs-mmc: add mmc host driver for i.MX23/28) Cc: <stable@vger.kernel.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit fdf35a6b ] I noticed that the VT switch doesn't work any longer with a Dell laptop with 1366x768 eDP when the machine is connected with a DP monitor. It behaves as if VT were switched, but the graphics remain frozen. Actually the keyboard works, so I could switch back to VT7 again. I tried to track down the problem, and encountered a long story until we reach to this error: - The machine is booted with video=1366x768 option (the distro installer seems to add it as default). - Recently, drm_helper_probe_single_connector_modes() deals with cmdline modes, and it tries to create a new mode when no matching mode is found. - The drm_mode_create_from_cmdline_mode() creates a mode based on either CVT of GFT according to the given cmdline mode; in our case, it's 1366x768. - Since both CVT and GFT can't express the width 1366 due to alignment, the resultant mode becomes 1368x768, slightly larger than the given size. - Later on, the atomic commit is performed, and in drm_atomic_check_only(), the size of each plane is checked. - The size check of 1366x768 fails due to the above, and eventually the whole VT switch fails. Back in the history, we've had a manual fix-up of 1368x768 in various places via c09dedb7 ("drm/edid: Add a workaround for 1366x768 HD panel"), but they have been all in drm_edid.c at probing the modes from EDID. For addressing the problem above, we need a similar hack to the mode newly created from cmdline, manually adjusting the width when the expected size is 1366 while we get 1368 instead. Fixes: eaf99c74 ("drm: Perform cmdline mode parsing during...") Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20170109145614.29454-1-tiwai@suse.deReviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
[ Upstream commit d6169d04 ] If a URB is killed while the host is removed we can end up in a situation where the hub thread takes the roothub device lock, and waits for the URB to be given back by xhci-hcd, blocking the host remove code. xhci-hcd tries to stop the endpoint and give back the urb, but can't as the host is removed from PCI bus at the same time, preventing the normal way of giving back urb. Instead we need to rely on the stop command timeout function to give back the urb. This xhci_stop_endpoint_command_watchdog() timeout function used a XHCI_STATE_DYING flag to indicate if the timeout function is already running, but later this flag has been taking into use in other places to mark that xhci is dying. Remove checks for XHCI_STATE_DYING in xhci_urb_dequeue. We are still checking that reading from pci state does not return 0xffffffff or that host is not halted before trying to stop the endpoint. This whole area of stopping endpoints, giving back URBs, and the wathdog timeout need rework, this fix focuses on solving a specific deadlock issue that we can then send to stable before any major rework. Cc: <stable@vger.kernel.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit 51ebfc92 ] A PCI-to-PCIe bridge (a "reverse bridge") has a PCI or PCI-X primary interface and a PCI Express secondary interface. The PCIe interface is a Downstream Port that originates a Link. See the "PCI Express to PCI/PCI-X Bridge Specification", rev 1.0, sections 1.2 and A.6. The bug report below involves a PCI-to-PCIe bridge and a PCIe switch below the bridge: 00:1e.0 Intel 82801 PCI Bridge to [bus 01-0a] 01:00.0 Pericom PI7C9X111SL PCIe-to-PCI Reversible Bridge to [bus 02-0a] 02:00.0 Pericom Device 8608 [PCIe Upstream Port] to [bus 03-0a] 03:01.0 Pericom Device 8608 [PCIe Downstream Port] to [bus 0a] 01:00.0 is configured as a PCI-to-PCIe bridge (despite the name printed by lspci). As we traverse a PCIe hierarchy, device connections alternate between PCIe Links and internal Switch logic. Previously we did not recognize that 01:00.0 had a secondary link, so we thought the 02:00.0 Upstream Port *did* have a secondary link. In fact, it's the other way around: 01:00.0 has a secondary link, and 02:00.0 has internal Switch logic on its secondary side. When we thought 02:00.0 had a secondary link, the pci_scan_slot() -> only_one_child() path assumed 02:00.0 could have only one child, so 03:00.0 was the only possible downstream device. But 03:00.0 doesn't exist, so we didn't look for any other devices on bus 03. Booting with "pci=pcie_scan_all" is a workaround, but we don't want users to have to do that. Recognize that PCI-to-PCIe bridges originate links on their secondary interfaces. Link: https://bugzilla.kernel.org/show_bug.cgi?id=189361 Fixes: d0751b98 ("PCI: Add dev->has_secondary_link to track downstream PCIe links") Tested-by:
Blake Moore <blake.moore@men.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.2+ Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit 89e9f7bc ] Martin reported that the Supermicro X8DTH-i/6/iF/6F advertises incorrect host bridge windows via _CRS: pci_root PNP0A08:00: host bridge window [io 0xf000-0xffff] pci_root PNP0A08:01: host bridge window [io 0xf000-0xffff] Both bridges advertise the 0xf000-0xffff window, which cannot be correct. Work around this by ignoring _CRS on this system. The downside is that we may not assign resources correctly to hot-added PCI devices (if they are possible on this system). Link: https://bugzilla.kernel.org/show_bug.cgi?id=42606Reported-by:
Martin Burnicki <martin.burnicki@meinberg.de> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 2d5a9c72 ] A short control transfer would currently fail to be detected, something which could lead to stale buffer data being used as valid input. Check for short transfers, and make sure to log any transfer errors. Note that this also avoids leaking heap data to user space (TIOCMGET) and the remote device (break control). Fixes: 6ce76104 ("USB: Driver for CH341 USB-serial adaptor") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Augusto Mecking Caringi authored
[ Upstream commit c8a6a09c ] In ca91cx42_slave_get function, the value pointed by vme_base pointer is set through: *vme_base = ioread32(bridge->base + CA91CX42_VSI_BS[i]); So it must be dereferenced to be used in calculation of pci_base: *pci_base = (dma_addr_t)*vme_base + pci_offset; This bug was caught thanks to the following gcc warning: drivers/vme/bridges/vme_ca91cx42.c: In function ‘ca91cx42_slave_get’: drivers/vme/bridges/vme_ca91cx42.c:467:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] *pci_base = (dma_addr_t)vme_base + pci_offset; Signed-off-by:
Augusto Mecking Caringi <augustocaringi@gmail.com> Acked-By:
Martyn Welch <martyn@welchs.me.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Akinobu Mita authored
[ Upstream commit 802c0388 ] The sysrq input handler should be attached to the input device which has a left alt key. On 32-bit kernels, some input devices which has a left alt key cannot attach sysrq handler. Because the keybit bitmap in struct input_device_id for sysrq is not correctly initialized. KEY_LEFTALT is 56 which is greater than BITS_PER_LONG on 32-bit kernels. I found this problem when using a matrix keypad device which defines a KEY_LEFTALT (56) but doesn't have a KEY_O (24 == 56%32). Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Mike Kravetz authored
[ Upstream commit e5bbc8a6 ] return_unused_surplus_pages() decrements the global reservation count, and frees any unused surplus pages that were backing the reservation. Commit 7848a4bf ("mm/hugetlb.c: add cond_resched_lock() in return_unused_surplus_pages()") added a call to cond_resched_lock in the loop freeing the pages. As a result, the hugetlb_lock could be dropped, and someone else could use the pages that will be freed in subsequent iterations of the loop. This could result in inconsistent global hugetlb page state, application api failures (such as mmap) failures or application crashes. When dropping the lock in return_unused_surplus_pages, make sure that the global reservation count (resv_huge_pages) remains sufficiently large to prevent someone else from claiming pages about to be freed. Analyzed by Paul Cassella. Fixes: 7848a4bf ("mm/hugetlb.c: add cond_resched_lock() in return_unused_surplus_pages()") Link: http://lkml.kernel.org/r/1483991767-6879-1-git-send-email-mike.kravetz@oracle.comSigned-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Reported-by:
Paul Cassella <cassella@cray.com> Suggested-by:
Michal Hocko <mhocko@kernel.org> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: <stable@vger.kernel.org> [3.15+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric Ren authored
[ Upstream commit e7ee2c08 ] The crash happens rather often when we reset some cluster nodes while nodes contend fiercely to do truncate and append. The crash backtrace is below: dlm: C21CBDA5E0774F4BA5A9D4F317717495: dlm_recover_grant 1 locks on 971 resources dlm: C21CBDA5E0774F4BA5A9D4F317717495: dlm_recover 9 generation 5 done: 4 ms ocfs2: Begin replay journal (node 318952601, slot 2) on device (253,18) ocfs2: End replay journal (node 318952601, slot 2) on device (253,18) ocfs2: Beginning quota recovery on device (253,18) for slot 2 ocfs2: Finishing quota recovery on device (253,18) for slot 2 (truncate,30154,1):ocfs2_truncate_file:470 ERROR: bug expression: le64_to_cpu(fe->i_size) != i_size_read(inode) (truncate,30154,1):ocfs2_truncate_file:470 ERROR: Inode 290321, inode i_size = 732 != di i_size = 937, i_flags = 0x1 ------------[ cut here ]------------ kernel BUG at /usr/src/linux/fs/ocfs2/file.c:470! invalid opcode: 0000 [#1] SMP Modules linked in: ocfs2_stack_user(OEN) ocfs2(OEN) ocfs2_nodemanager ocfs2_stackglue(OEN) quota_tree dlm(OEN) configfs fuse sd_mod iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi af_packet iscsi_ibft iscsi_boot_sysfs softdog xfs libcrc32c ppdev parport_pc pcspkr parport joydev virtio_balloon virtio_net i2c_piix4 acpi_cpufreq button processor ext4 crc16 jbd2 mbcache ata_generic cirrus virtio_blk ata_piix drm_kms_helper ahci syscopyarea libahci sysfillrect sysimgblt fb_sys_fops ttm floppy libata drm virtio_pci virtio_ring uhci_hcd virtio ehci_hcd usbcore serio_raw usb_common sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 Supported: No, Unsupported modules are loaded CPU: 1 PID: 30154 Comm: truncate Tainted: G OE N 4.4.21-69-default #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20151112_172657-sheep25 04/01/2014 task: ffff88004ff6d240 ti: ffff880074e68000 task.ti: ffff880074e68000 RIP: 0010:[<ffffffffa05c8c30>] [<ffffffffa05c8c30>] ocfs2_truncate_file+0x640/0x6c0 [ocfs2] RSP: 0018:ffff880074e6bd50 EFLAGS: 00010282 RAX: 0000000000000074 RBX: 000000000000029e RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffff880074e6bda8 R08: 000000003675dc7a R09: ffffffff82013414 R10: 0000000000034c50 R11: 0000000000000000 R12: ffff88003aab3448 R13: 00000000000002dc R14: 0000000000046e11 R15: 0000000000000020 FS: 00007f839f965700(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f839f97e000 CR3: 0000000036723000 CR4: 00000000000006e0 Call Trace: ocfs2_setattr+0x698/0xa90 [ocfs2] notify_change+0x1ae/0x380 do_truncate+0x5e/0x90 do_sys_ftruncate.constprop.11+0x108/0x160 entry_SYSCALL_64_fastpath+0x12/0x6d Code: 24 28 ba d6 01 00 00 48 c7 c6 30 43 62 a0 8b 41 2c 89 44 24 08 48 8b 41 20 48 c7 c1 78 a3 62 a0 48 89 04 24 31 c0 e8 a0 97 f9 ff <0f> 0b 3d 00 fe ff ff 0f 84 ab fd ff ff 83 f8 fc 0f 84 a2 fd ff RIP [<ffffffffa05c8c30>] ocfs2_truncate_file+0x640/0x6c0 [ocfs2] It's because ocfs2_inode_lock() get us stale LVB in which the i_size is not equal to the disk i_size. We mistakenly trust the LVB because the underlaying fsdlm dlm_lock() doesn't set lkb_sbflags with DLM_SBF_VALNOTVALID properly for us. But, why? The current code tries to downconvert lock without DLM_LKF_VALBLK flag to tell o2cb don't update RSB's LVB if it's a PR->NULL conversion, even if the lock resource type needs LVB. This is not the right way for fsdlm. The fsdlm plugin behaves different on DLM_LKF_VALBLK, it depends on DLM_LKF_VALBLK to decide if we care about the LVB in the LKB. If DLM_LKF_VALBLK is not set, fsdlm will skip recovering RSB's LVB from this lkb and set the right DLM_SBF_VALNOTVALID appropriately when node failure happens. The following diagram briefly illustrates how this crash happens: RSB1 is inode metadata lock resource with LOCK_TYPE_USES_LVB; The 1st round: Node1 Node2 RSB1: PR RSB1(master): NULL->EX ocfs2_downconvert_lock(PR->NULL, set_lvb==0) ocfs2_dlm_lock(no DLM_LKF_VALBLK) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - dlm_lock(no DLM_LKF_VALBLK) convert_lock(overwrite lkb->lkb_exflags with no DLM_LKF_VALBLK) RSB1: NULL RSB1: EX reset Node2 dlm_recover_rsbs() recover_lvb() /* The LVB is not trustable if the node with EX fails and * no lock >= PR is left. We should set RSB_VALNOTVALID for RSB1. */ if(!(kb_exflags & DLM_LKF_VALBLK)) /* This means we miss the chance to return; * to invalid the LVB here. */ The 2nd round: Node 1 Node2 RSB1(become master from recovery) ocfs2_setattr() ocfs2_inode_lock(NULL->EX) /* dlm_lock() return the stale lvb without setting DLM_SBF_VALNOTVALID */ ocfs2_meta_lvb_is_trustable() return 1 /* so we don't refresh inode from disk */ ocfs2_truncate_file() mlog_bug_on_msg(disk isize != i_size_read(inode)) /* crash! */ The fix is quite straightforward. We keep to set DLM_LKF_VALBLK flag for dlm_lock() if the lock resource type needs LVB and the fsdlm plugin is uesed. Link: http://lkml.kernel.org/r/1481275846-6604-1-git-send-email-zren@suse.comSigned-off-by:
Eric Ren <zren@suse.com> Reviewed-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Mark Rutland authored
[ Upstream commit ddc37832 ] On APQ8060, the kernel crashes in arch_hw_breakpoint_init, taking an undefined instruction trap within write_wb_reg. This is because Scorpion CPUs erroneously appear to set DBGPRSR.SPD when WFI is issued, even if the core is not powered down. When DBGPRSR.SPD is set, breakpoint and watchpoint registers are treated as undefined. It's possible to trigger similar crashes later on from userspace, by requesting the kernel to install a breakpoint or watchpoint, as we can go idle at any point between the reset of the debug registers and their later use. This has always been the case. Given that this has always been broken, no-one has complained until now, and there is no clear workaround, disable hardware breakpoints and watchpoints on Scorpion to avoid these issues. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Reported-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Stephen Boyd <sboyd@codeaurora.org> Acked-by:
Will Deacon <will.deacon@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: stable@vger.kernel.org Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 146cc8a1 ] The current implementation failed to detect short transfers when attempting to read the line state, and also, to make things worse, logged the content of the uninitialised heap transfer buffer. Fixes: abf492e7 ("USB: kl5kusb105: fix DMA buffers on stack") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by:
-
Dennis Kadioglu authored
[ Upstream commit 2e40795c ] Plantronics BT600 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x1" and "cannot get freq at ep 0x82". This patch adds the USB ID of the BT600 to quirks.c and avoids those error messages. Signed-off-by:
Dennis Kadioglu <denk@post.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Zhou Chengming authored
[ Upstream commit 93362fa4 ] Fixes CVE-2016-9191, proc_sys_readdir doesn't drop reference added by grab_header when return from !dir_emit_dots path. It can cause any path called unregister_sysctl_table will wait forever. The calltrace of CVE-2016-9191: [ 5535.960522] Call Trace: [ 5535.963265] [<ffffffff817cdaaf>] schedule+0x3f/0xa0 [ 5535.968817] [<ffffffff817d33fb>] schedule_timeout+0x3db/0x6f0 [ 5535.975346] [<ffffffff817cf055>] ? wait_for_completion+0x45/0x130 [ 5535.982256] [<ffffffff817cf0d3>] wait_for_completion+0xc3/0x130 [ 5535.988972] [<ffffffff810d1fd0>] ? wake_up_q+0x80/0x80 [ 5535.994804] [<ffffffff8130de64>] drop_sysctl_table+0xc4/0xe0 [ 5536.001227] [<ffffffff8130de17>] drop_sysctl_table+0x77/0xe0 [ 5536.007648] [<ffffffff8130decd>] unregister_sysctl_table+0x4d/0xa0 [ 5536.014654] [<ffffffff8130deff>] unregister_sysctl_table+0x7f/0xa0 [ 5536.021657] [<ffffffff810f57f5>] unregister_sched_domain_sysctl+0x15/0x40 [ 5536.029344] [<ffffffff810d7704>] partition_sched_domains+0x44/0x450 [ 5536.036447] [<ffffffff817d0761>] ? __mutex_unlock_slowpath+0x111/0x1f0 [ 5536.043844] [<ffffffff81167684>] rebuild_sched_domains_locked+0x64/0xb0 [ 5536.051336] [<ffffffff8116789d>] update_flag+0x11d/0x210 [ 5536.057373] [<ffffffff817cf61f>] ? mutex_lock_nested+0x2df/0x450 [ 5536.064186] [<ffffffff81167acb>] ? cpuset_css_offline+0x1b/0x60 [ 5536.070899] [<ffffffff810fce3d>] ? trace_hardirqs_on+0xd/0x10 [ 5536.077420] [<ffffffff817cf61f>] ? mutex_lock_nested+0x2df/0x450 [ 5536.084234] [<ffffffff8115a9f5>] ? css_killed_work_fn+0x25/0x220 [ 5536.091049] [<ffffffff81167ae5>] cpuset_css_offline+0x35/0x60 [ 5536.097571] [<ffffffff8115aa2c>] css_killed_work_fn+0x5c/0x220 [ 5536.104207] [<ffffffff810bc83f>] process_one_work+0x1df/0x710 [ 5536.110736] [<ffffffff810bc7c0>] ? process_one_work+0x160/0x710 [ 5536.117461] [<ffffffff810bce9b>] worker_thread+0x12b/0x4a0 [ 5536.123697] [<ffffffff810bcd70>] ? process_one_work+0x710/0x710 [ 5536.130426] [<ffffffff810c3f7e>] kthread+0xfe/0x120 [ 5536.135991] [<ffffffff817d4baf>] ret_from_fork+0x1f/0x40 [ 5536.142041] [<ffffffff810c3e80>] ? kthread_create_on_node+0x230/0x230 One cgroup maintainer mentioned that "cgroup is trying to offline a cpuset css, which takes place under cgroup_mutex. The offlining ends up trying to drain active usages of a sysctl table which apprently is not happening." The real reason is that proc_sys_readdir doesn't drop reference added by grab_header when return from !dir_emit_dots path. So this cpuset offline path will wait here forever. See here for details: http://www.openwall.com/lists/oss-security/2016/11/04/13 Fixes: f0c3b509 ("[readdir] convert procfs") Cc: stable@vger.kernel.org Reported-by:
CAI Qian <caiqian@redhat.com> Tested-by:
Yang Shukui <yangshukui@huawei.com> Signed-off-by:
Zhou Chengming <zhouchengming1@huawei.com> Acked-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit 3895dbf8 ] Protecting the mountpoint hashtable with namespace_sem was sufficient until a call to umount_mnt was added to mntput_no_expire. At which point it became possible for multiple calls of put_mountpoint on the same hash chain to happen on the same time. Kristen Johansen <kjlx@templeofstupid.com> reported: > This can cause a panic when simultaneous callers of put_mountpoint > attempt to free the same mountpoint. This occurs because some callers > hold the mount_hash_lock, while others hold the namespace lock. Some > even hold both. > > In this submitter's case, the panic manifested itself as a GP fault in > put_mountpoint() when it called hlist_del() and attempted to dereference > a m_hash.pprev that had been poisioned by another thread. Al Viro observed that the simple fix is to switch from using the namespace_sem to the mount_lock to protect the mountpoint hash table. I have taken Al's suggested patch moved put_mountpoint in pivot_root (instead of taking mount_lock an additional time), and have replaced new_mountpoint with get_mountpoint a function that does the hash table lookup and addition under the mount_lock. The introduction of get_mounptoint ensures that only the mount_lock is needed to manipulate the mountpoint hashtable. d_set_mounted is modified to only set DCACHE_MOUNTED if it is not already set. This allows get_mountpoint to use the setting of DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry happens exactly once. Cc: stable@vger.kernel.org Fixes: ce07d891 ("mnt: Honor MNT_LOCKED when detaching mounts") Reported-by:
Krister Johansen <kjlx@templeofstupid.com> Suggested-by:
-
Johan Hovold authored
[ Upstream commit f2950b78 ] Make sure to stop the interrupt URB before returning on errors during open. Fixes: 664d5df9 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 030ee7ae ] The modem-control signals are managed by the tty-layer during open and should not be asserted prematurely when set_termios is called from driver open. Also make sure that the signals are asserted only when changing speed from B0. Fixes: 664d5df9 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit a20047f3 ] The private baud_rate variable is used to configure the port at open and reset-resume and must never be set to (and left at) zero or reset-resume and all further open attempts will fail. Fixes: aa91def4 ("USB: ch341: set tty baud speed according to tty struct") Fixes: 664d5df9 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 4e2da446 ] DTR and RTS will be asserted by the tty-layer when the port is opened and deasserted on close (if HUPCL is set). Make sure the initial state is not-asserted before the port is first opened as well. Fixes: 664d5df9 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 8a08403b ] fixes: https://bugs.freedesktop.org/show_bug.cgi?id=98897 https://bugs.launchpad.net/bugs/1651981Acked-by:
Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Cc: Adrian Fiergolski <A.Fiergolski@gmail.com> Signed-off-by:
-
Arvind Yadav authored
[ Upstream commit 064c3db9 ] Here, If devm_ioremap will fail. It will return NULL. Then hpriv->base = NULL - 0x20000; Kernel can run into a NULL-pointer dereference. This error check will avoid NULL pointer dereference. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Damien Le Moal authored
[ Upstream commit 2dae9955 ] For an ATA device supporting the sense data reporting feature set, a failed command will trigger the execution of ata_eh_request_sense if the result task file of the failed command has the ATA_SENSE bit set (sense data available bit). ata_eh_request_sense executes the REQUEST SENSE DATA EXT command to retrieve the sense data of the failed command. On success of REQUEST SENSE DATA EXT, the ATA_SENSE bit will NOT be set (the command succeeded) but ata_eh_request_sense nevertheless tests the availability of sense data by testing that bit presence in the result tf of the REQUEST SENSE DATA EXT command. This leads us to falsely assume that request sense data failed and to the warning message: atax.xx: request sense failed stat 50 emask 0 Upon success of REQUEST SENSE DATA EXT, set the ATA_SENSE bit in the result task file command so that sense data can be returned by ata_eh_request_sense. Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Dave Martin authored
[ Upstream commit fd7c9914 ] Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Cc: stable@vger.kernel.org Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Signed-off-by:
Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by:
-
Tejun Heo authored
[ Upstream commit e0edc8c5 ] Marko reports that CX1-JB512-HP shows the same timeout issues as CX1-JB256-HP. Let's apply MAX_SEC_128 to all devices in the series. Signed-off-by:
Marko Koski-Vähälä <marko@koski-vahala.com> Cc: stable@vger.kernel.org # v3.19+ Signed-off-by:
-
Greg Kroah-Hartman authored
[ Upstream commit 1ebb7114 ] Make sure we have enough of a report structure to validate before looking at it. Reported-by:
Benoit Camredon <benoit.camredon@airbus.com> Tested-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit 1c3415a0 ] The following crash may be seen if bad data is received from the touchscreen. [ 2189.425150] elants_i2c i2c-ELAN0001:00: unknown packet ff ff ff ff [ 2189.430738] divide error: 0000 [#1] PREEMPT SMP [ 2189.434679] gsmi: Log Shutdown Reason 0x03 [ 2189.434689] Modules linked in: ip6t_REJECT nf_reject_ipv6 rfcomm evdi uinput uvcvideo cmac videobuf2_vmalloc videobuf2_memops snd_hda_codec_hdmi i2c_dev videobuf2_core snd_soc_sst_cht_bsw_rt5645 snd_hda_intel snd_intel_sst_acpi btusb btrtl btbcm btintel bluetooth snd_soc_sst_acpi snd_hda_codec snd_intel_sst_core snd_hwdep snd_soc_sst_mfld_platform snd_hda_core snd_soc_rt5645 memconsole_x86_legacy memconsole zram snd_soc_rl6231 fuse ip6table_filter iwlmvm iwlwifi iwl7000_mac80211 cfg80211 iio_trig_sysfs joydev cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf industrialio snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun [ 2189.434866] CPU: 0 PID: 106 Comm: irq/184-ELAN000 Tainted: G W 3.18.0-13101-g57e8190 #1 [ 2189.434883] Hardware name: GOOGLE Ultima, BIOS Google_Ultima.7287.131.43 07/20/2016 [ 2189.434898] task: ffff88017a0b6d80 ti: ffff88017a2bc000 task.ti: ffff88017a2bc000 [ 2189.434913] RIP: 0010:[<ffffffffbecc48d5>] [<ffffffffbecc48d5>] elants_i2c_irq+0x190/0x200 [ 2189.434937] RSP: 0018:ffff88017a2bfd98 EFLAGS: 00010293 [ 2189.434948] RAX: 0000000000000000 RBX: ffff88017a967828 RCX: ffff88017a9678e8 [ 2189.434962] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000000 [ 2189.434975] RBP: ffff88017a2bfdd8 R08: 00000000000003e8 R09: 0000000000000000 [ 2189.434989] R10: 0000000000000000 R11: 000000000044a2bd R12: ffff88017a991800 [ 2189.435001] R13: ffffffffbe8a2a53 R14: ffff88017a0b6d80 R15: ffff88017a0b6d80 [ 2189.435011] FS: 0000000000000000(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000 [ 2189.435022] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2189.435030] CR2: 00007f678d94b000 CR3: 000000003f41a000 CR4: 00000000001007f0 [ 2189.435039] Stack: [ 2189.435044] ffff88017a2bfda8 ffff88017a9678e8 646464647a2bfdd8 0000000006e09574 [ 2189.435060] 0000000000000000 ffff88017a088b80 ffff88017a921000 ffffffffbe8a2a53 [ 2189.435074] ffff88017a2bfe08 ffffffffbe8a2a73 ffff88017a0b6d80 0000000006e09574 [ 2189.435089] Call Trace: [ 2189.435101] [<ffffffffbe8a2a53>] ? irq_thread_dtor+0xa9/0xa9 [ 2189.435112] [<ffffffffbe8a2a73>] irq_thread_fn+0x20/0x40 [ 2189.435123] [<ffffffffbe8a2be1>] irq_thread+0x14e/0x222 [ 2189.435135] [<ffffffffbee8cbeb>] ? __schedule+0x3b3/0x57a [ 2189.435145] [<ffffffffbe8a29aa>] ? wake_threads_waitq+0x2d/0x2d [ 2189.435156] [<ffffffffbe8a2a93>] ? irq_thread_fn+0x40/0x40 [ 2189.435168] [<ffffffffbe87c385>] kthread+0x10e/0x116 [ 2189.435178] [<ffffffffbe87c277>] ? __kthread_parkme+0x67/0x67 [ 2189.435189] [<ffffffffbee900ac>] ret_from_fork+0x7c/0xb0 [ 2189.435199] [<ffffffffbe87c277>] ? __kthread_parkme+0x67/0x67 [ 2189.435208] Code: ff ff eb 73 0f b6 bb c1 00 00 00 83 ff 03 7e 13 49 8d 7c 24 20 ba 04 00 00 00 48 c7 c6 8a cd 21 bf eb 4d 0f b6 83 c2 00 00 00 99 <f7> ff 83 f8 37 75 15 48 6b f7 37 4c 8d a3 c4 00 00 00 4c 8d ac [ 2189.435312] RIP [<ffffffffbecc48d5>] elants_i2c_irq+0x190/0x200 [ 2189.435323] RSP <ffff88017a2bfd98> [ 2189.435350] ---[ end trace f4945345a75d96dd ]--- [ 2189.443841] Kernel panic - not syncing: Fatal exception [ 2189.444307] Kernel Offset: 0x3d800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 2189.444519] gsmi: Log Shutdown Reason 0x02 The problem was seen with a 3.18 based kernel, but there is no reason to believe that the upstream code is safe. Fixes: 66aee900 ("Input: add support for Elan eKTH I2C touchscreens") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Signed-off-by:
-
Rolf Eike Beer authored
[ Upstream commit 3659f98b ] Nothing in this minimal script seems to require bash. We often run these tests on embedded devices where the only shell available is the busybox ash. Use sh instead. Signed-off-by:
Rolf Eike Beer <eb@emlix.com> Cc: stable@vger.kernel.org Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Rolf Eike Beer authored
[ Upstream commit a2b1e8a2 ] Nothing in this minimal script seems to require bash. We often run these tests on embedded devices where the only shell available is the busybox ash. Use sh instead. Signed-off-by:
-
Alan Stern authored
[ Upstream commit 0a8fd134 ] When checking a new device's descriptors, the USB core does not check for duplicate endpoint addresses. This can cause a problem when the sysfs files for those endpoints are created; trying to create multiple files with the same name will provoke a WARNING: WARNING: CPU: 2 PID: 865 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x8a/0xa0 sysfs: cannot create duplicate filename '/devices/platform/dummy_hcd.0/usb2/2-1/2-1:64.0/ep_05' Kernel panic - not syncing: panic_on_warn set ... CPU: 2 PID: 865 Comm: kworker/2:1 Not tainted 4.9.0-rc7+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event ffff88006bee64c8 ffffffff81f96b8a ffffffff00000001 1ffff1000d7dcc2c ffffed000d7dcc24 0000000000000001 0000000041b58ab3 ffffffff8598b510 ffffffff81f968f8 ffffffff850fee20 ffffffff85cff020 dffffc0000000000 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff8168c88e>] panic+0x1cb/0x3a9 kernel/panic.c:179 [<ffffffff812b80b4>] __warn+0x1c4/0x1e0 kernel/panic.c:542 [<ffffffff812b8195>] warn_slowpath_fmt+0xc5/0x110 kernel/panic.c:565 [<ffffffff819e70ca>] sysfs_warn_dup+0x8a/0xa0 fs/sysfs/dir.c:30 [<ffffffff819e7308>] sysfs_create_dir_ns+0x178/0x1d0 fs/sysfs/dir.c:59 [< inline >] create_dir lib/kobject.c:71 [<ffffffff81fa1b07>] kobject_add_internal+0x227/0xa60 lib/kobject.c:229 [< inline >] kobject_add_varg lib/kobject.c:366 [<ffffffff81fa2479>] kobject_add+0x139/0x220 lib/kobject.c:411 [<ffffffff82737a63>] device_add+0x353/0x1660 drivers/base/core.c:1088 [<ffffffff82738d8d>] device_register+0x1d/0x20 drivers/base/core.c:1206 [<ffffffff82cb77d3>] usb_create_ep_devs+0x163/0x260 drivers/usb/core/endpoint.c:195 [<ffffffff82c9f27b>] create_intf_ep_devs+0x13b/0x200 drivers/usb/core/message.c:1030 [<ffffffff82ca39d3>] usb_set_configuration+0x1083/0x18d0 drivers/usb/core/message.c:1937 [<ffffffff82cc9e2e>] generic_probe+0x6e/0xe0 drivers/usb/core/generic.c:172 [<ffffffff82caa7fa>] usb_probe_device+0xaa/0xe0 drivers/usb/core/driver.c:263 This patch prevents the problem by checking for duplicate endpoint addresses during enumeration and skipping any duplicates. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
-
Oliver Neukum authored
[ Upstream commit 674aea07 ] This device gives the following error on detection. xhci_hcd 0000:00:11.0: ERROR Transfer event for disabled endpoint or incorrect stream ring The same error is not seen when it is added to unusual_device list with US_FL_NO_REPORT_OPCODES passed. Signed-off-by:
George Cherian <george.cherian@cavium.com> Signed-off-by:
Oliver Neukum <oneukun@suse.com> CC: stable@vger.kernel.org Signed-off-by:
-
Bin Liu authored
[ Upstream commit c48400ba ] During dma teardown for dequque urb, if musb load is high, musb might generate bogus rx ep interrupt even when the rx fifo is flushed. In such case any of the follow log messages could happen. musb_host_rx 1853: BOGUS RX2 ready, csr 0000, count 0 musb_host_rx 1936: RX3 dma busy, csr 2020 As mentioned in the current inline comment, clearing ep interrupt in the teardown path avoids the bogus interrupt, so implement clear_ep_rxintr() callback. This bug seems to be existing since the initial driver for musb support, but I only validated the fix back to v4.1, so only cc stable for v4.1+. cc: stable@vger.kernel.org # 4.1+ Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Bin Liu authored
[ Upstream commit 6def85a3 ] During dma teardown for dequque urb, if musb load is high, musb might generate bogus rx ep interrupt even when the rx fifo is flushed. In such case any of the follow log messages could happen. musb_host_rx 1853: BOGUS RX2 ready, csr 0000, count 0 musb_host_rx 1936: RX3 dma busy, csr 2020 As mentioned in the current inline comment, clearing ep interrupt in the teardown path avoids the bogus interrupt. Clearing ep interrupt is platform dependent, so this patch adds a platform callback to allow glue driver to clear the ep interrupt. This bug seems to be existing since the initial driver for musb support, but I only validated the fix back to v4.1, so only cc stable for v4.1+. cc: stable@vger.kernel.org # 4.1+ Signed-off-by:
-
- 03 Mar, 2017 7 commits
-
-
James Hogan authored
[ Upstream commit 32eb12a6 ] Flush the KVM entry code from the icache on all CPUs, not just the one that built the entry code. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.16.x- Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 753aacfd ] A single netlink socket might own multiple interfaces *and* a scheduled scan request (which might belong to another interface), so when it goes away both may need to be destroyed. Remove the schedule_scan_stop indirection to fix this - it's only needed for interface destruction because of the way this works right now, with a single work taking care of all interfaces. Cc: stable@vger.kernel.org Fixes: 93a1e86c ("nl80211: Stop scheduled scan if netlink client disappears") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit c7efff92 ] Although the old quirk table showed ASUS X71SL with ALC663 codec being compatible with asus-mode3 fixup, the bugzilla reporter explained that asus-model8 fits better for the dual headphone controls. So be it. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=191781 Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 85bcf96c ] ASUS ROG Ranger VIII with ALC1150 codec requires the extra GPIO pin to up for the front panel. Just use the existing fixup for setting up the GPIO pins. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189411 Cc: <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit ef079936 ] Fix NULL-pointer dereference in open() should a malicious device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 .. [<bf06a6b0>] (ti_open [ti_usb_3410_5052]) from [<bf02e118>] (serial_port_activate+0x68/0x98 [usbserial]) Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit cc090924 ] Fix NULL-pointer dereference in open() should the device lack the expected endpoints: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... PC is at spcp8x5_open+0x30/0xd0 [spcp8x5] Fixes: 619a6f1d ("USB: add usb-serial spcp8x5 driver") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit f09d1886 ] The write URB was being killed using the synchronous interface while holding a spin lock in close(). Simply drop the lock and busy-flag update, something which would have been taken care of by the completion handler if the URB was in flight. Fixes: f7a33e60 ("USB: serial: add quatech2 usb to serial driver") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
