- 04 Jul, 2018 14 commits
-
-
Jason Gunthorpe authored
Instead of the large set of indirecting macros, define the few needed macros to directly instantiate the struct uverbs_method_def and associated attributes list. This is small amount of code duplication but the readability is far better. Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com>
-
Jason Gunthorpe authored
Instead of using a complex cascade of macros, just directly provide the initializer list each of the declarations is trying to create. Now that the macros are simplified this also reworks the uverbs_attr_spec to be friendly to older compilers by eliminating any unnamed structures/unions inside, and removing the duplication of some fields. The structure size remains at 16 bytes which was the original motivation for some of this oddness. Signed-off-by:
-
Jason Gunthorpe authored
Two methods are sharing the same attribute constant, but the attribute definitions are not the same. This should not have been done, instead split them into two attributes with the same number. Signed-off-by:
-
Jason Gunthorpe authored
The specs are required to operate the uverbs file, so they belong inside the ib_uverbs_device, not inside the ib_device. The spec passed in the ib_device is just a communication from the driver and should not be used during runtime. This also changes the lifetime of the spec memory to match the ib_uverbs_device, however at this time the spec_root can still contain driver pointers after disassociation, so it cannot be used if ib_dev is NULL. This is preparation for another series. Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
-
Jason Gunthorpe authored
For dependencies, branch based on 'mellanox/mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git Pull Dump and fill MKEY from Leon Romanovsky: ==================== MLX5 IB HCA offers the memory key, dump_fill_mkey to increase performance, when used in a send or receive operations. It is used to force local HCA operations to skip the PCI bus access, while keeping track of the processed length in the ibv_sge handling. In this three patch series, we expose various bits in our HW spec file (mlx5_ifc.h), move unneeded for mlx5_core FW command and export such memory key to user space thought our mlx5-abi header file. ==================== Botched auto-merge in mlx5_ib_alloc_ucontext() resolved by hand. * branch 'mlx5-dump-fill-mkey': IB/mlx5: Expose dump and fill memory key net/mlx5: Add hardware definitions for dump_fill_mkey net/mlx5: Limit scope of dump_fill_mkey function net/mlx5: Rate limit errors in command interface Signed-off-by:
-
Yonatan Cohen authored
MLX5 IB HCA offers the memory key, dump_fill_mkey to boost performance, when used in a send or receive operations. It is used to force local HCA operations to skip the PCI bus access, while keeping track of the processed length in the ibv_sge handling. Meaning, instead of a PCI write access the HCA leaves the target memory untouched, and skips filling that packet section. Similar behavior is done upon send, the HCA skips data in memory relevant to this key and saves PCI bus access. This functionality saves PCI read/write operations. Signed-off-by:
Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Reviewed-by:
Guy Levi <guyle@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
MLX5 IB HCA offers the memory key, dump_fill_mkey to boost performance by forcing local HCA operations to skip the PCI bus access, This patch adds needed hardware definitions. Signed-off-by: -
Yonatan Cohen authored
mlx5_core_dump_fill_mkey() is going to be used in next patch in IB and doesn't need to be visible to whole mlx5_core. Move that command to mlx5_ib. Signed-off-by:
-
Dan Carpenter authored
The srq->swq[] is allocated in bnxt_qplib_create_srq(). It has srq->hwq.max_elements elements so these tests should be > instead of >= or we might go beyond the end of the array. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
-
Dan Carpenter authored
The sgid_tbl->tbl[] array is allocated in bnxt_qplib_alloc_sgid_tbl(). It has sgid_tbl->max elements. So the > should be >= to prevent accessing one element beyond the end of the array. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by:
-
Dan Carpenter authored
"nents" is an unsigned int, so if ib_map_mr_sg() returns a negative error code then it's type promoted to a high unsigned int which is treated as success. Fixes: a060b562 ("IB/core: generic RDMA READ/WRITE API") Signed-off-by:
-
Or Gerlitz authored
The 2.6.18... was a hell of a ride, and by now both me and Roi are not dealing with iser any more. Max will replace us as maintainer, good luck to you dear! Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Acked-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Leon Romanovsky authored
VMA lookup is supposed to be performed while mmap_sem is held. Fixes: f26c7c83 ("i40iw: Add 2MB page support") Signed-off-by:
-
Tarick Bedeir authored
rdma_ah_find_type() can reach into ib_device->port_immutable with a potentially out-of-bounds port number, so check that the port number is valid first. Fixes: 44c58487 ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") Signed-off-by:
Tarick Bedeir <tarick@google.com> Reviewed-by:
-
- 03 Jul, 2018 9 commits
-
-
Neil Horman authored
On repeated module load/unload cycles, its possible for the pvrmda driver to encounter this crash: ... [ 297.032448] RIP: 0010:[<ffffffff839e4620>] [<ffffffff839e4620>] netdev_walk_all_upper_dev_rcu+0x50/0xb0 [ 297.034078] RSP: 0018:ffff95087780bd08 EFLAGS: 00010286 [ 297.034986] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff95087a0c0000 [ 297.036196] RDX: ffff95087a0c0000 RSI: ffffffff839e44e0 RDI: ffff950835d0c000 [ 297.037421] RBP: ffff95087780bd40 R08: ffff95087a0e0ea0 R09: abddacd03f8e0ea0 [ 297.038636] R10: abddacd03f8e0ea0 R11: ffffef5901e9dbc0 R12: ffff95087a0c0000 [ 297.039854] R13: ffffffff839e44e0 R14: ffff95087a0c0000 R15: ffff950835d0c828 [ 297.041071] FS: 0000000000000000(0000) GS:ffff95087fc00000(0000) knlGS:0000000000000000 [ 297.042443] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 297.043429] CR2: ffffffffffffffe8 CR3: 000000007a652000 CR4: 00000000003607f0 [ 297.044674] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 297.045893] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 297.047109] Call Trace: [ 297.047545] [<ffffffff839e4698>] netdev_has_upper_dev_all_rcu+0x18/0x20 [ 297.048691] [<ffffffffc05d31af>] is_eth_port_of_netdev+0x2f/0xa0 [ib_core] [ 297.049886] [<ffffffffc05d3180>] ? is_eth_active_slave_of_bonding_rcu+0x70/0x70 [ib_core] ... This occurs because vmw_pvrdma on probe stores a pointer to the netdev that exists on function 0 of the same bus/device/slot (which represents the vmxnet3 ethernet driver). However, it never removes this pointer if the vmxnet3 module is removed, leading to crashes resulting from use after free dereferencing incidents like the one above. The fix is pretty straightforward. vmw_pvrdma should listen for NETDEV_REGISTER and NETDEV_UNREGISTER events in its event listener code block, and update the stored netdev pointer accordingly. This solution has been tested by myself and the reporter with successful results. This fix also allows the pvrdma driver to find its underlying ethernet device in the event that vmxnet3 is loaded after pvrdma, which it was not able to do before. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by: ruquin@redhat.com Tested-by:
Adit Ranadive <aditr@vmware.com> Acked-by:
-
Maor Gottlieb authored
Currently the driver sets the mask of the gre_protocol to 0xffff without consideration in the user request. Fix it by copy the mask from the verbs spec. Fixes: da2f22ae ("IB/mlx5: Add support for GRE flow specification") Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Reviewed-by:
Ariel Levkovich <lariel@mellanox.com> Signed-off-by:
-
Michael J. Ruhl authored
The general interrupt handler is_rcv_avail_int() has two paths, do_interrupt() (callback) and handle_user_interrupt(). The do_interrupt() callback is for the threaded receive handling. is_rcv_avail_int() cannot handle threaded IRQs. If the do_interrupt() path is taken, and the IRQ returns IRQ_WAKE_THREAD, the IRQ behavior will be indeterminate. Remove incorrect call to do_interrupt() from is_rcv_avail_int(), leaving the un-threaded (handle_user_interrupt()) path. Fixes: f4f30031 ("staging/rdma/hfi1: Thread the receive interrupt.") Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
The in_use_ctxts bitmask is for user receive contexts only. Setting it for any other type of receive context is incorrect. Move initial set of in_use_ctxts bits from the general context init to the user context specific init. Having this bit set can allow contexts to be incorrectly identified by some IRQ handlers. This will allow handle_user_interrupt() will now filter user contexts correctly. Clean up redundant is_rcv_urgent_int() user context check. A follow on patch will clean up an incorrect code path in the is_rcv_avail_int(). Fixes: 8737ce95 ("IB/hfi1: Fix an assign/ordering issue with shared context IDs") Reviewed-by:
-
Bart Van Assche authored
BUG: KASAN: use-after-free in srpt_set_enabled+0x1a9/0x1e0 [ib_srpt] Read of size 4 at addr ffff8801269d23f8 by task check/29726 CPU: 4 PID: 29726 Comm: check Not tainted 4.18.0-rc2-dbg+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 srpt_set_enabled+0x1a9/0x1e0 [ib_srpt] srpt_tpg_enable_store+0xb8/0x120 [ib_srpt] configfs_write_file+0x14e/0x1d0 [configfs] __vfs_write+0xd2/0x3b0 vfs_write+0x101/0x270 ksys_write+0xab/0x120 __x64_sys_write+0x43/0x50 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f235cfe6154 Fixes: aaf45bd8 ("IB/srpt: Detect session shutdown reliably") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Bart Van Assche authored
Avoid that KASAN reports the following: BUG: KASAN: use-after-free in srpt_close_ch+0x4f/0x1b0 [ib_srpt] Read of size 4 at addr ffff880151180cb8 by task check/4681 CPU: 15 PID: 4681 Comm: check Not tainted 4.18.0-rc2-dbg+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 srpt_close_ch+0x4f/0x1b0 [ib_srpt] srpt_set_enabled+0xf7/0x1e0 [ib_srpt] srpt_tpg_enable_store+0xb8/0x120 [ib_srpt] configfs_write_file+0x14e/0x1d0 [configfs] __vfs_write+0xd2/0x3b0 vfs_write+0x101/0x270 ksys_write+0xab/0x120 __x64_sys_write+0x43/0x50 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: aaf45bd8 ("IB/srpt: Detect session shutdown reliably") Signed-off-by:
-
Bart Van Assche authored
Avoid that the compiler complains about set-but-not-used variables when building with W=1. This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
Remove the driver version and release date information because such information is not relevant for an upstream driver. See also commit e1267b01 ("RDMA: Remove useless MODULE_VERSION"). Signed-off-by:
-
Bart Van Assche authored
IB_MULTICAST_LID_BASE is defined as follows: #define IB_MULTICAST_LID_BASE cpu_to_be16(0xC000) Hence use be16_to_cpu() to convert it to CPU endianness. Compile-tested only. Fixes: af808ece ("IB/SA: Check dlid before SA agent queries for ClassPortInfo") Signed-off-by:
-
- 29 Jun, 2018 6 commits
-
-
Yishai Hadas authored
Improve uverbs_cleanup_ucontext algorithm to work properly when the topology graph of the objects cannot be determined at compile time. This is the case with objects created via the devx interface in mlx5. Typically uverbs objects must be created in a strict topologically sorted order, so that LIFO ordering will generally cause them to be freed properly. There are only a few cases (eg memory windows) where objects can point to things out of the strict LIFO order. Instead of using an explicit ordering scheme where the HW destroy is not allowed to fail, go over the list multiple times and allow the destroy function to fail. If progress halts then a final, desperate, cleanup is done before leaking the memory. This indicates a driver bug. Signed-off-by:
-
Bart Van Assche authored
Since there are adapters that have four ports, increase the size of the srpt_device.port[] array. This patch avoids that the following warning is hit with quad port Chelsio adapters: WARN_ON(sdev->device->phys_port_cnt > ARRAY_SIZE(sdev->port)); Reported-by:Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Sagi Grimberg authored
We need to set can_queue earlier than when enabling the scsi host. in a blk-mq enabled environment, the tagset allocation is taken from can_queue which cannot be modified later. Also, pass an updated .can_queue to iscsi_session_setup to have enough iscsi tasks allocated in the session kfifo. Reported-by:
Karandeep Chahal <karandeepchahal@gmail.com> Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
-
Vijay Immanuel authored
Do not call sk_dst_set() on every packet transfer because that calls sk_tx_queue_clear(), which clears the tx queue. A QP must stay on the same tx queue to maintain packet order. Signed-off-by:
Vijay Immanuel <vijayi@attalasystems.com> Acked-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Jason Gunthorpe authored
This lock used to be protecting a call to dst_get_neighbour_noref, however the below commit changed it to dst_neigh_lookup which no longer requires rcu. Access to nud_state, neigh_event_send or rdma_copy_addr does not require RCU, so delete the lock. Fixes: 02b61955 ("infiniband: Convert dst_fetch_ha() over to dst_neigh_lookup().") Signed-off-by:
-
Leon Romanovsky authored
The failure in releasing one UAR doesn't mean that we can't continue to release rest of system pages, so don't return too early. As part of cleanup, there is no need to print warning if mlx5_cmd_free_uar() fails because such warning will be printed as part of mlx5_cmd_exec(). Signed-off-by:
-
- 27 Jun, 2018 3 commits
-
-
Yuval Shaia authored
This function is not in use - delete it. Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Acked-by:
-
Jason Gunthorpe authored
port_num is untrusted data from the user, so it should be checked after calling fill_sgid_attr, which validates it. Fixes: 8d9ec9ad ("IB/core: Add a sgid_attr pointer to struct rdma_ah_attr") Signed-off-by:
-
Leon Romanovsky authored
Any error status returned by FW will trigger a print similar to the following error message in the dmesg. [ 55.884355] mlx5_core 0000:00:04.0: mlx5_cmd_check:712:(pid 555): ALLOC_UAR(0x802) op_mod(0x0) failed, status limits exceeded(0x8), syndrome (0x0) Those prints are extremely valuable to diagnose issues with running system and it is important to keep them. However, not-so-careful user can trigger endless number of such prints by depleting HW resources and will spam dmesg. Rate limiting of such messages solves this issue. Signed-off-by:
-
- 26 Jun, 2018 4 commits
-
-
Jason Gunthorpe authored
Since slave GID's do not exist in the core gid table we can no longer use the core code to help do this without creating inconsistencies. Directly create the AH using mlx4 internal APIs. Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Leon Romanovsky authored
kern_spec->reserved is checked prior to calling kern_spec_to_ib_spec_filter() which makes this second check redundant. Signed-off-by:
-
Leon Romanovsky authored
dma_map_sg_attrs() returns 0 on error and can't return a negative number (ensured by BUG_ON), so don't check. Signed-off-by:
-
Leon Romanovsky authored
Number of specs is provided by user and in valid case can be equal to zero. Such argument causes to call to kcalloc() with zero-length request and in return the ZERO_SIZE_PTR is assigned. This pointer is different from NULL and makes various if (..) checks to success. Fixes: b6ba4a9a ("IB/uverbs: Add support for flow counters") Signed-off-by:
-
- 25 Jun, 2018 4 commits
-
-
Leon Romanovsky authored
Following the removal of ib_create_flow(), adjust the code to get rid of ib_destroy_flow() too. Signed-off-by:
-
Leon Romanovsky authored
There are no kernel users of this interface so lets drop it. Signed-off-by:
-
Jason Gunthorpe authored
In the accepted series "Refactor ib_uverbs_write path", we presented the roadmap to get rid of uverbs_cmd_mask and uverbs_ex_cmd_mask fields in favor of simple check of function pointer. So let's put NULL check of create_flow function callback despite the fact that uverbs_ex_cmd_mask still exists. Link: https://www.spinics.net/lists/linux-rdma/msg60753.htmlSuggested-by:
-
Bart Van Assche authored
Reflect the acquisition of SanDisk by Western Digital in my e-mail address. Remove the reference to David Dillow's git tree since SRP patches are queued by Doug and Jason. Remove the reference to the OpenFabrics website since the srp_daemon source code has been moved from that website into the rdma-core project. Add an entry for the SRP target driver. Signed-off-by:
-
