- 17 Oct, 2008 40 commits
-
-
Darron Broad authored
This add frontend R/W mutual exclusion. Prior to this point in time it was possible to open both frontends simultaneously which an MFE card cannot support. In order to stop this, a delayed open is performed which has the following function: - Return EBUSY after a configurable amount of time if a frontend is unavailable due to the other being in use. - Only allow opening of a frontend if the kernel thread of the other has stopped. This solution was chosen to allow switching between frontends to work as seamlessly as possible. When both frontends are actually opened simultaneously then one will only open, but if quick switching is performed between one of many then the new open will succeed in a clean fashion rather than interrupting a kernel thread. Signed-off-by:
Darron Broad <darron@kewl.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Darron Broad authored
The cx22702 is now always reset on module load. Prior to this the cx22702 was not found on i2c scan without a full reset. Signed-off-by:
-
Darron Broad authored
This adds a configurable (one per card) gate control option for multi-frontend. Prior to this point gate control was assumed to be on the primary frontend, this is a fault when the gate to the analogue section is on the secondary which is the default for both the HVR-3000 and HVR-4000 in MFE. Signed-off-by:
-
Darron Broad authored
When using MFE on a setup with both and HVR-3000 and ASUS P7131 card it was noticed that frontend allocation for saa7134 adapters was missing. This patch adds that allocation for both saa7134 and cx23885 adapters. Signed-off-by:
-
Darron Broad authored
A number of reference to videobuf_dvb_get_frontend used an invalid index. This has been fixed. The section for the HVR3000 in advise_acquire was redundant as the same logic is used on the HVR4000. This has been removed and both cards now use the same function. A number of small errors and whitespace errors are also fixed. Signed-off-by:
-
Steven Toth authored
A detailed description from the original patches 2 years ago: "The WinTV-HVR3000 has a single transport bus which is shared between a DVB-T and DVB-S modulator. These patches build on the bus acquisition cx88 work from a few weeks ago to add support for this. So to applications the HVR3000 looks like this: /dev/dvb/adapter0/fe0 (cx24123 DVB-S demod) /dev/dvb/adapter0/fe1 (cx22702 DVB-T demod) Additional boards continue as before, eg: /dev/dvb/adapter1/fe0 (lgdt3302 ATSC demod) The basic change is removing the single instance of the videobuf_dvb in cx8802_dev and saa7134_dev(?) and replacing it with a list and some supporting functions. *NOTE* This branch was taken before v4l-dvb was closed for 2.6.19 so two or three current cx88 patches appear to be reversed by this tree, this will be cleaned up in the near future. The patches missing change the mutex handing to core->lock, fix an enumeration problem." It should be recognised that a number of people have been maintaining this patchset. Significant levels of Kudos to everyone one involved, including but not limited to: Darron Broad Fabio M. Di Nitto Carlo Scarfoglio Hans Werner Without the work of these people, and countless others, my two year old patches would of died on the Mercurial linuxtv.org vine a long time ago. TODO: Revise these patches a little further so that the need for demux1 and dvr0 is optional, not mandatory on the HVR3000. HISTORY (darron): This is the last update to MFE prepared by Hans which is based upon the `scratchpad' diff created by Carlo. All MFE work prior to that point must be attributed to Fabio who ported and maintained Steve's original patch up to that time. Signed-off-by:
Steven Toth <stoth@linuxtv.org> Signed-off-by:
-
Tobias Lorenz authored
Just a trivial typo fix. Signed-off-by: -
Tobias Lorenz authored
This patch removes the unnecessary get/set input/audio functions. The reason is, that the V4L2 specification says, that if input or audio cannot be switched anyway, the functions doesn't need to be implemented. I've tested the new driver with all current radio programs in Debian/testing and found no problems with that. In my opinion, the driver is much cleaner by removing these unnecessary functions. Signed-off-by:
Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by:
-
Tobias Lorenz authored
This patch corrects the behavior of mono/stereo indication and selection. These functions now work conform to what's defined in the V4L2 specification. Signed-off-by:
-
Tobias Lorenz authored
The V4L2 specification says, when to check and when to return tuner->type as constant value. This patch corrects exactly this behavior, so that it is now conform to the V4L2 specification. Signed-off-by:
-
Tobias Lorenz authored
This patch changes the handling of unsupported base controls. In the former version, specific unsupported base controls were listed in the queryctrl table and were flagged as disabled controls. This was done for all base controls used by the applications. The patch now removes the specific base controls and instead lets queryctrl automatically return unsupported base controls flagged as disabled. Signed-off-by:
-
Tobias Lorenz authored
This patch improves support for multiple radio devices. In previous versions all region relevant settings were derived from one module parameter. As in future versions, the region and other configuration should be configurable per device from the user space, this patch already retrieves all relevant information from the actual device specific settings. Signed-off-by:
-
Tobias Lorenz authored
This patch mainly adds correct module_param access rights. Also there are a lot of small coding style enhancements and some corrections of the variable references in module_param. Signed-off-by:
-
Hans Verkuil authored
Looking at these headers as they appear in the kernel makes you wonder why it is done that way. Refer to the v4l-dvb repository where the full unstripped header can be found to understand the reasoning behind this. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Hans Verkuil authored
- Convert to use v4l2-i2c-drv-legacy.h to be able to handle the new i2c API - Cleanups - Use v4l_dbg/v4l_info to have uniform kernel messages Signed-off-by:
-
Jean Delvare authored
The adapter class of the zoran driver was never set. However, converting i2c drivers used by zoran to the new i2c API requires this field to be correct. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Manu Abraham authored
Signed-off-by:
-
David Ellingsworth authored
This patch prevents stk-webcam from updating usb device information once the camera has been removed. This prevents a crash that would otherwise occur if the camera is disconnected while it is still in use. Signed-off-by:
David Ellingsworth <david@identd.dyndns.org> Signed-off-by:
-
David Ellingsworth authored
This patch: 1) removes the unnecessary kref.h include file 2) removes unnecessary pointer validation from read and poll routines. (Neither poll nor read may be called unless a call to open succeeds. A successful call to open will always set the file private_data pointer. Verifying that it is not null is therefore unnecessary. The associated release and mmap calls currently ignore this check.) 3) adds a space to syslog output. 4) removes an unused function prototype. Signed-off-by:
-
Hans Verkuil authored
Ian Armstrong pointed out to me that it is perfectly valid to have a 576 lines YUV video with NTSC output in this particular case. In fact, without this the X driver for ivtv does not function properly. Reverted my earlier change that restrictred the height to 480 for NTSC and add the comments provided by Ian to explain what is happening here. Thanks-to: Ian Armstrong <ian@iarmst.co.uk> Signed-off-by:
-
Ian Armstrong authored
Modifies behaviour of a failed dma write() operation for the yuv device. If the dma transfer for the yuv device fails, the write() operation will now exit immediately. Signed-off-by:
Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (25 commits) staging: at76_usb wireless driver Staging: workaround build system bug Staging: Lindent sxg.c Staging: SLICOSS: Call pci_release_regions at driver exit Staging: SLICOSS: Fix remaining type names Staging: SLICOSS: Fix warnings due to static usage Staging: SLICOSS: lots of checkpatch fixes Staging: go7007 v4l fixes Staging: Fix gcc warnings in sxg Staging: add echo cancelation module Staging: add wlan-ng prism2 usb driver Staging: add w35und wifi driver Staging: USB/IP: add host driver Staging: USB/IP: add client driver Staging: USB/IP: add common functions needed Staging: add the go7007 video driver Staging: add me4000 pci data collection driver Staging: add me4000 firmware files Staging: add sxg network driver Staging: add Alacritech slicoss network driver ... Fixed up conflicts due to taint flags changes and MAINTAINERS cleanup in MAINTAINERS, include/linux/kernel.h and kernel/panic.c.
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (47 commits) hwmon: (adm1026) Prevent log spamming hwmon: (adm1026) Fix debug messages hwmon: (adm1029) Use mask for fan_div value hwmon: (adt7470) Add documentation hwmon: (ibmaem) Automatically load on IBM systems via DMI hwmon: (ibmpex) Automatically load on IBM systems via DMI hwmon: (w83781d) Use new style driver binding hwmon: (w83781d) Stop abusing struct i2c_client for ISA devices hwmon: (w83781d) Make ISA interface depend on CONFIG_ISA hwmon: (w83781d) Additional information about AS99127F PWM hwmon: (w83781d) Detect alias chips hwmon: (w83781d) Refactor beep enable handling hwmon: Drop dead links to old National Semiconductor chip datasheets hwmon: (w83791d) add support for thermal cruise mode hwmon: (w83791d) add pwm_enable support hwmon: (w83791d) add manual PWM support hwmon: (w83791d) fan 4/5 pins can also be used for gpio hwmon: (max1619) Use inline functions instead of macros hwmon: (it87) Fix thermal sensor type values hwmon: (lm78) Convert to a new-style i2c driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: Fix debugfs_create_dir's error checking method for sound/soc/ ALSA: ASoC: Convert playpaq_wm8510 to bulk route registration API ALSA: kernel docs: fix sound/core/ kernel-doc ALSA: Handle NULL jacks in snd_jack_report() ALSA: hda - Fix PCM type of Nvidia HDMI devices
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: remove __generic_unplug_device() from exports block: move q->unplug_work initialization blktrace: pass zfcp driver data blktrace: add support for driver data block: fix current kernel-doc warnings block: only call ->request_fn when the queue is not stopped block: simplify string handling in elv_iosched_store() block: fix kernel-doc for blk_alloc_devt() block: fix nr_phys_segments miscalculation bug block: add partition attribute for partition number block: add BIG FAT WARNING to CONFIG_DEBUG_BLOCK_EXT_DEVT softirq: Add support for triggering softirq work on softirqs.
-
git://www.jni.nu/crisLinus Torvalds authored
* 'for-linus' of git://www.jni.nu/cris: CRIS: proper defconfig setup [CRIS] Rename boot-linkscripts and fix the path to them.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits) [SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n libiscsi: fix locking in iscsi_eh_device_reset libiscsi: check reason why we are stopping iscsi session to determine error value [SCSI] iscsi_tcp: return a descriptive error value during connection errors [SCSI] libiscsi: rename host reset to target reset [SCSI] iscsi class: fix endpoint id handling [SCSI] libiscsi: Support drivers initiating session removal [SCSI] libiscsi: fix data corruption when target has to resend data-in packets [SCSI] sd: Switch kernel printing level for DIF messages [SCSI] sd: Correctly handle all combinations of DIF and DIX [SCSI] sd: Always print actual protection_type [SCSI] sd: Issue correct protection operation [SCSI] scsi_error: fix target reset handling [SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events [SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling [SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disrupted [SCSI] scsi_dh_alua: remove REQ_NOMERGE [SCSI] lpfc 8.2.8 : update driver version to 8.2.8 [SCSI] lpfc 8.2.8 : Add MSI-X support [SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code DID_TRANSPORT_DISRUPTED ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Remove CONFIG_KMOD from net/ (towards removing CONFIG_KMOD entirely) ipv4: Add a missing rcu_assign_pointer() in routing cache. [netdrvr] ibmtr: PCMCIA IBMTR is ok on 64bit xen-netfront: Avoid unaligned accesses to IP header lmc: copy_*_user under spinlock [netdrvr] myri10ge, ixgbe: remove broken select INTEL_IOATDMA
-
Jean Delvare authored
When debugging is enabled, the adm1026 driver currently logs the message "Setting VID from GPIO11-15" 108 times each time you run "sensors". Once should be enough. Signed-off-by:
-
