It was discovered that after commit 65efa61d ("selftests: kvm: provide
common function to enable eVMCS") hyperv_cpuid selftest is failing on AMD.
The reason is that the commit changed _vcpu_ioctl() to vcpu_ioctl() in the
test and this one can't fail.

Instead of fixing the test is seems to make more sense to not announce
KVM_CAP_HYPERV_ENLIGHTENED_VMCS support if it is definitely missing
(on svm and in case kvm_intel.nested=0).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Since commit 5158917c ("KVM: x86: nVMX: Allow nested_enable_evmcs to
be NULL") the code in x86.c is prepared to see nested_enable_evmcs being
NULL and in VMX case it actually is when nesting is disabled. Remove the
unneeded stub from SVM code.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Hyper-V provides direct tlb flush function which helps
L1 Hypervisor to handle Hyper-V tlb flush request from
L2 guest. Add the function support for VMX.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Hyper-V direct tlb flush function should be enabled for
guest that only uses Hyper-V hypercall. User space
hypervisor(e.g, Qemu) can disable KVM identification in
CPUID and just exposes Hyper-V identification to make
sure the precondition. Add new KVM capability KVM_CAP_
HYPERV_DIRECT_TLBFLUSH for user space to enable Hyper-V
direct tlb function and this function is default to be
disabled in KVM.
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The struct hv_vp_assist_page was defined incorrectly.
The "vtl_control" should be u64[3], "nested_enlightenments
_control" should be a u64 and there are 7 reserved bytes
following "enlighten_vmentry". Fix the definition.
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

These MSRs should be enumerated by KVM_GET_MSR_INDEX_LIST, so that
userspace knows that these MSRs may be part of the vCPU state.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Eric Hankland <ehankland@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for Merrifield Basin Cove PMIC

  New Device Support:
   - Add support for Intel Tiger Lake to Intel LPSS PCI
   - Add support for Intel Sky Lake to Intel LPSS PCI
   - Add support for ST-Ericsson DB8520 to DB8500 PRCMU

  New Functionality:
   - Add RTC and PWRC support to MT6323

  Fix-ups:
   - Clean-up include files; davinci_voicecodec, asic3, sm501, mt6397
   - Ignore return values from debugfs_create*(); ab3100-*, ab8500-debugfs, aat2870-core
   - Device Tree changes; rn5t618, mt6397
   - Use new I2C API; tps80031, 88pm860x-core, ab3100-core, bcm590xx,
                      da9150-core, max14577, max77693, max77843, max8907,
                      max8925-i2c, max8997, max8998, palmas, twl-core,
   - Remove obsolete code; da9063, jz4740-adc
   - Simplify semantics; timberdale, htc-i2cpld
   - Add 'fall-through' tags; omap-usb-host, db8500-prcmu
   - Remove superfluous prints; ab8500-debugfs, db8500-prcmu, fsl-imx25-tsadc,
                                intel_soc_pmic_bxtwc, qcom_rpm, sm501
   - Trivial rename/whitespace/typo fixes; mt6397-core, MAINTAINERS
   - Reorganise code structure; mt6397-*
   - Improve code consistency; intel-lpss
   - Use MODULE_SOFTDEP() helper; intel-lpss
   - Use DEFINE_RES_*() helpers; mt6397-core

  Bug Fixes:
   - Clean-up resources; max77620
   - Prevent input events being dropped on resume; intel-lpss-pci
   - Prevent sleeping in IRQ context; ezx-pcap"

* tag 'mfd-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (48 commits)
  mfd: mt6323: Add MT6323 RTC and PWRC
  mfd: mt6323: Replace boilerplate resource code with DEFINE_RES_* macros
  mfd: mt6397: Add mutex include
  dt-bindings: mfd: mediatek: Add MT6323 Power Controller
  dt-bindings: mfd: mediatek: Update RTC to include MT6323
  dt-bindings: mfd: mediatek: mt6397: Change to relative paths
  mfd: db8500-prcmu: Support the higher DB8520 ARMSS
  mfd: intel-lpss: Use MODULE_SOFTDEP() instead of implicit request
  mfd: htc-i2cpld: Drop check because i2c_unregister_device() is NULL safe
  mfd: sm501: Include the GPIO driver header
  mfd: intel-lpss: Add Intel Skylake ACPI IDs
  mfd: intel-lpss: Consistently use GENMASK()
  mfd: Add support for Merrifield Basin Cove PMIC
  mfd: ezx-pcap: Replace mutex_lock with spin_lock
  mfd: asic3: Include the right header
  MAINTAINERS: altera-sysmgr: Fix typo in a filepath
  mfd: mt6397: Extract IRQ related code from core driver
  mfd: mt6397: Rename macros to something more readable
  mfd: Remove dev_err() usage after platform_get_irq()
  mfd: db8500-prcmu: Mark expected switch fall-throughs
  ...

Pull backlight updates from Lee Jones:
 "Core Frameworks
   - Obtain scale type through sysfs

  New Functionality:
   - Provide Device Tree functionality in rave-sp-backlight
   - Calculate if scale type is (non-)linear in pwm_bl

  Fix-ups:
   - Simplify code in lm3630a_bl
   - Trivial rename/whitespace/typo fixes in lms283gf05
   - Remove superfluous NULL check in tosa_lcd
   - Fix power state initialisation in gpio_backlight
   - List supported file in MAINTAINERS

  Bug Fixes:
   - Kconfig - default to not building unless requested in
     {LED,BACKLIGHT}_CLASS_DEVICE"

* tag 'backlight-next-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm_bl: Set scale type for brightness curves specified in the DT
  backlight: pwm_bl: Set scale type for CIE 1931 curves
  backlight: Expose brightness curve type through sysfs
  MAINTAINERS: Add entry for stable backlight sysfs ABI documentation
  backlight: gpio-backlight: Correct initial power state handling
  video: backlight: tosa_lcd: drop check because i2c_unregister_device() is NULL safe
  video: backlight: Drop default m for {LCD,BACKLIGHT_CLASS_DEVICE}
  backlight: lms283gf05: Fix a typo in the description passed to 'devm_gpio_request_one()'
  backlight: lm3630a: Switch to use fwnode_property_count_uXX()
  backlight: rave-sp: Leave initial state and register with correct device

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it
     (Krzysztof Wilczynski)

   - Fix incorrect PCIe device types and remove dev->has_secondary_link
     to simplify code that deals with upstream/downstream ports (Mika
     Westerberg)

   - After suspend, restore Resizable BAR size bits correctly for 1MB
     BARs (Sumit Saxena)

   - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra)

  Virtualization:

   - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna
     Labs (Ali Saidi)

   - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg)

   - Remove group write permissions from sysfs sriov_numvfs,
     sriov_drivers_autoprobe (Kelsey Skunberg)

  Hotplug:

   - Simplify pciehp indicator control (Denis Efremov)

  Peer-to-peer DMA:

   - Allow P2P DMA between root ports for whitelisted bridges (Logan
     Gunthorpe)

   - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe)

   - DMA map P2P DMA requests that traverse host bridge (Logan
     Gunthorpe)

  Amazon Annapurna Labs host bridge driver:

   - Add DT binding and controller driver (Jonathan Chocron)

  Hyper-V host bridge driver:

   - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui)

   - Fix PCI domain number collisions (Haiyang Zhang)

   - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang)

   - Fix build errors on non-SYSFS config (Randy Dunlap)

  i.MX6 host bridge driver:

   - Limit DBI register length (Stefan Agner)

  Intel VMD host bridge driver:

   - Fix config addressing issues (Jon Derrick)

  Layerscape host bridge driver:

   - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao)

   - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately
     (Xiaowei Bao)

  Mediatek host bridge driver:

   - Add MT7629 controller support (Jianjun Wang)

  Mobiveil host bridge driver:

   - Fix CPU base address setup (Hou Zhiqiang)

   - Make "num-lanes" property optional (Hou Zhiqiang)

  Tegra host bridge driver:

   - Fix OF node reference leak (Nishka Dasgupta)

   - Disable MSI for root ports to work around design problem (Vidya
     Sagar)

   - Add Tegra194 DT binding and controller support (Vidya Sagar)

   - Add support for sideband pins and slot regulators (Vidya Sagar)

   - Add PIPE2UPHY support (Vidya Sagar)

  Misc:

   - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg)

   - Unexport pci_bus_get(), etc (Kelsey Skunberg)

   - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in
     the PCI core (Kelsey Skunberg)

   - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg)

   - Mark expected switch fall-through (Gustavo A. R. Silva)

   - Propagate errors for optional regulators and PHYs (Thierry Reding)

   - Fix kernel command line resource_alignment parameter issues (Logan
     Gunthorpe)"

* tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits)
  PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI
  arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
  arm64: tegra: Add configuration for PCIe C5 sideband signals
  PCI: tegra: Add support to enable slot regulators
  PCI: tegra: Add support to configure sideband pins
  PCI: vmd: Fix shadow offsets to reflect spec changes
  PCI: vmd: Fix config addressing when using bus offsets
  PCI: dwc: Add validation that PCIe core is set to correct mode
  PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver
  dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding
  PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
  PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port
  PCI: Add ACS quirk for Amazon Annapurna Labs root ports
  PCI: Add Amazon's Annapurna Labs vendor ID
  MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer
  PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers
  dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
  dt-bindings: PCI: tegra: Add sideband pins configuration entries
  PCI: tegra: Add Tegra194 PCIe support
  PCI: Get rid of dev->has_secondary_link flag
  ...

Pull smack updates from Casey Schaufler:
 "Four patches for v5.4. Nothing is major.

  All but one are in response to mechanically detected potential issues.
  The remaining patch cleans up kernel-doc notations"

* tag 'smack-for-5.4-rc1' of git://github.com/cschaufler/smack-next:
  smack: use GFP_NOFS while holding inode_smack::smk_lock
  security: smack: Fix possible null-pointer dereferences in smack_socket_sock_rcv_skb()
  smack: fix some kernel-doc notations
  Smack: Don't ignore other bprm->unsafe flags if LSM_UNSAFE_PTRACE is set

  - Fix typos and whitespace errors (Bjorn Helgaas, Krzysztof Wilczynski)

  - Remove unnecessary "return" statements (Krzysztof Wilczynski)

  - Correct of_irq_parse_pci() function documentation (Lubomir Rintel)

* pci/trivial:
  PCI: Remove unnecessary returns
  PCI: OF: Correct of_irq_parse_pci() documentation
  PCI: Fix typos and whitespace errors

  - Fix VMD config addressing to ignore starting bus offset (Jon Derrick)

  - Fix VMD shadow offset scratchpad address (Jon Derrick)

* remotes/lorenzo/pci/vmd:
  PCI: vmd: Fix shadow offsets to reflect spec changes
  PCI: vmd: Fix config addressing when using bus offsets

  - Fix Tegra OF node reference leak (Nishka Dasgupta)

  - Add #defines for PCIe Data Link Feature and Physical Layer 16.0 GT/s
    features (Vidya Sagar)

  - Disable MSI for Tegra Root Ports since they don't support using MSI for
    all Root Port events (Vidya Sagar)

  - Group DesignWare write-protected register writes together (Vidya Sagar)

  - Move DesignWare capability search interfaces so they can be used by
    both host and endpoint drivers (Vidya Sagar)

  - Add DesignWare extended capability search interfaces (Vidya Sagar)

  - Export dw_pcie_wait_for_link() so drivers can be modules (Vidya Sagar)

  - Add "snps,enable-cdm-check" DT binding for Configuration Dependent
    Module (CDM) register checking (Vidya Sagar)

  - Add DesignWare support for "snps,enable-cdm-check" CDM checking (Vidya
    Sagar)

  - Add "supports-clkreq" DT binding for host drivers to decide whether to
    advertise low power features (Vidya Sagar)

  - Add DT binding for Tegra194 (Vidya Sagar)

  - Add DT binding for Tegra194 P2U (PIPE to UPHY) block (Vidya Sagar)

  - Add support for Tegra194 P2U (PIPE to UPHY) (Vidya Sagar)

  - Add support for Tegra194 host controller (Vidya Sagar)

  - Add Tegra support for sideband PERST# and CLKREQ# for C5 (Vidya Sagar)

  - Add Tegra support for slot regulators for p2972-0000 platform (Vidya
    Sagar)

* lorenzo/pci/tegra:
  arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
  arm64: tegra: Add configuration for PCIe C5 sideband signals
  PCI: tegra: Add support to enable slot regulators
  PCI: tegra: Add support to configure sideband pins
  dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
  dt-bindings: PCI: tegra: Add sideband pins configuration entries
  PCI: tegra: Add Tegra194 PCIe support
  phy: tegra: Add PCIe PIPE2UPHY support
  dt-bindings: PHY: P2U: Add Tegra194 P2U block
  dt-bindings: PCI: tegra: Add device tree support for Tegra194
  dt-bindings: Add PCIe supports-clkreq property
  PCI: dwc: Add support to enable CDM register check
  dt-bindings: PCI: designware: Add binding for CDM register check
  PCI: dwc: Export dw_pcie_wait_for_link() API
  PCI: dwc: Add extended configuration space capability search API
  PCI: dwc: Move config space capability search API
  PCI: dwc: Group DBI registers writes requiring unlocking
  PCI: Disable MSI for Tegra root ports
  PCI: Add #defines for some of PCIe spec r4.0 features
  PCI: tegra: Fix OF node reference leak

  - Fix mobiveil inbound window CPU base address setup (Hou Zhiqiang)

* remotes/lorenzo/pci/mobiveil:
  PCI: mobiveil: Fix the CPU base address setup in inbound window

  - Propagate regulator_get_optional() errors so callers can distinguish
    real errors from optional regulators that are absent (Thierry Reding)

  - Propagate devm_of_phy_get() errors so callers can distinguish
    real errors from optional PHYs that are absent (Thierry Reding)

  - Add Andrew Murray as PCI native driver reviewer (Lorenzo Pieralisi)

* remotes/lorenzo/pci/misc:
  MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer
  PCI: iproc: Propagate errors for optional PHYs
  PCI: histb: Propagate errors for optional regulators
  PCI: armada8x: Propagate errors for optional PHYs
  PCI: imx6: Propagate errors for optional regulators
  PCI: exynos: Propagate errors for optional PHYs
  PCI: rockchip: Propagate errors for optional regulators

  - Add mediatek support for MT7629 (Jianjun Wang)

* remotes/lorenzo/pci/mediatek:
  PCI: mediatek: Add controller support for MT7629
  dt-bindings: PCI: Add support for MT7629

  - Mark Layerscape endpoint BARs 2 and 4 as 64-bit (Xiaowei Bao)

  - Add CONFIG_PCI_LAYERSCAPE_EP so EP/RC can be built separately (Xiaowei
    Bao)

* remotes/lorenzo/pci/layerscape:
  PCI: layerscape: Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately
  PCI: layerscape: Add the bar_fixed_64bit property to the endpoint driver

  - Reduce i.MX 6Quad DBI register length to avoid aborts from accessing
    invalid registers (Stefan Agner)

* remotes/lorenzo/pci/imx:
  PCI: imx6: Limit DBI register length

  - Fix Hyper-V use-after-free in pci_dev removal (Dexuan Cui)

  - Fix Hyper-V build error in non-sysfs config (Randy Dunlap)

  - Reallocate to avoid Hyper-V domain number collisions (Haiyang Zhang)

  - Use Hyper-V instance ID bytes 4-5 to reduce domain collisions (Haiyang
    Zhang)

* remotes/lorenzo/pci/hv:
  PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers
  PCI: hv: Detect and fix Hyper-V PCI domain number collision
  PCI: pci-hyperv: Fix build errors on non-SYSFS config
  PCI: hv: Avoid use of hv_pci_dev->pci_slot after freeing it

  - Make kirin_dw_pcie_ops constant (Nishka Dasgupta)

  - Make DesignWare "num-lanes" property optional and remove from relevant
    DTs (Hou Zhiqiang)

* remotes/lorenzo/pci/dwc:
  arm64: dts: fsl: Remove num-lanes property from PCIe nodes
  ARM: dts: ls1021a: Remove num-lanes property from PCIe nodes
  PCI: dwc: Return directly when num-lanes is not found
  dt-bindings: PCI: designware: Remove the num-lanes from Required properties
  PCI: kirin: Make structure kirin_dw_pcie_ops constant

  - Add driver for Amazon Annapurna Labs PCIe controller (Jonathan Chocron)

  - Disable MSI-X since Annapurna Labs advertises it, but it's broken
    (Jonathan Chocron)

  - Disable VPD since Annapurna Labs advertises it, but it's broken
    (Jonathan Chocron)

  - Add ACS quirk since Annapurna Labs doesn't support ACS but does provide
    some equivalent protections (Ali Saidi)

* remotes/lorenzo/pci/al:
  PCI: dwc: Add validation that PCIe core is set to correct mode
  PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver
  dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding
  PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port
  PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port
  PCI: Add ACS quirk for Amazon Annapurna Labs root ports
  PCI: Add Amazon's Annapurna Labs vendor ID

# Conflicts:
#	drivers/pci/quirks.c

  - Convert pci_resource_to_user() to a weak function to remove
    HAVE_ARCH_PCI_RESOURCE_TO_USER #defines (Denis Efremov)

  - Use PCI_SRIOV_NUM_BARS for idiomatic loop structure (Denis Efremov)

  - Fix Resizable BAR size suspend/restore for 1MB BARs (Sumit Saxena)

  - Correct "pci=resource_alignment" example in documentation (Alexey
    Kardashevskiy)

* pci/resource:
  PCI: Correct pci=resource_alignment parameter example
  PCI: Restore Resizable BAR size bits correctly for 1MB BARs
  PCI: Use PCI_SRIOV_NUM_BARS in loops instead of PCI_IOV_RESOURCE_END
  PCI: Convert pci_resource_to_user() to a weak function

# Conflicts:
#	drivers/pci/pci.c

  - Cleanup pciehp LED/indicator control with a new consolidated
    pciehp_set_indicators() interface that controls both Attention and
    Power Indicators (Denis Efremov)

* pci/pciehp:
  PCI: pciehp: Refer to "Indicators" instead of "LEDs" in comments
  PCI: pciehp: Remove pciehp_green_led_{on,off,blink}()
  PCI: pciehp: Remove pciehp_set_attention_status()
  PCI: pciehp: Combine adjacent indicator updates
  PCI: pciehp: Add pciehp_set_indicators() to set both indicators

  - Move P2PCMA PCI bus offset from generic dev_pagemap to
    pci_p2pdma_pagemap (Logan Gunthorpe)

  - Add provider's pci_dev to pci_p2pdma_pagemap (Logan Gunthorpe)

  - Apply host bridge whitelist for ACS (Logan Gunthorpe)

  - Whitelist some Intel host bridges for P2PDMA (Logan Gunthorpe)

  - Add attrs to pci_p2pdma_map_sg() to match dma_map_sg() (Logan
    Gunthorpe)

  - Add pci_p2pdma_unmap_sg() (Logan Gunthorpe)

  - Store P2PDMA mapping method in xarray (Logan Gunthorpe)

  - Map requests that traverse a host bridge (Logan Gunthorpe)

  - Allow IOMMU for host bridge whitelist (Logan Gunthorpe)

* pci/p2pdma:
  PCI/P2PDMA: Update pci_p2pdma_distance_many() documentation
  PCI/P2PDMA: Allow IOMMU for host bridge whitelist
  PCI/P2PDMA: dma_map() requests that traverse the host bridge
  PCI/P2PDMA: Store mapping method in an xarray
  PCI/P2PDMA: Factor out __pci_p2pdma_map_sg()
  PCI/P2PDMA: Introduce pci_p2pdma_unmap_sg()
  PCI/P2PDMA: Add attrs argument to pci_p2pdma_map_sg()
  PCI/P2PDMA: Whitelist some Intel host bridges
  PCI/P2PDMA: Factor out host_bridge_whitelist()
  PCI/P2PDMA: Apply host bridge whitelist for ACS
  PCI/P2PDMA: Factor out __upstream_bridge_distance()
  PCI/P2PDMA: Add constants for map type results to upstream_bridge_distance()
  PCI/P2PDMA: Add provider's pci_dev to pci_p2pdma_pagemap struct
  PCI/P2PDMA: Introduce private pagemap structure

  - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra)

* pci/msi:
  PCI/MSI: Enable PCI_MSI_IRQ_DOMAIN support for RISC-V

  - Use devm_add_action_or_reset() helper (Fuqian Huang)

  - Mark expected switch fall-through (Gustavo A. R. Silva)

  - Convert sysfs device attributes from __ATTR() to DEVICE_ATTR() (Kelsey
    Skunberg)

  - Convert sysfs file permissions from S_IRUSR etc to octal (Kelsey
    Skunberg)

  - Move SR-IOV sysfs functions to iov.c (Kelsey Skunberg)

  - Add pci_info_ratelimited() to ratelimit PCI messages separately
    (Krzysztof Wilczynski)

  - Fix "'static' not at beginning of declaration" warnings (Krzysztof
    Wilczynski)

  - Clean up resource_alignment parameter to not require static buffer
    (Logan Gunthorpe)

  - Add ACS quirk for iProc PAXB (Abhinav Ratna)

  - Add pci_irq_vector() and other stubs for !CONFIG_PCI (Herbert Xu)

* pci/misc:
  PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI
  PCI: Add ACS quirk for iProc PAXB
  PCI: Force trailing new line to resource_alignment_param in sysfs
  PCI: Move pci_[get|set]_resource_alignment_param() into their callers
  PCI: Clean up resource_alignment parameter to not require static buffer
  PCI: Use static const struct, not const static struct
  PCI: Add pci_info_ratelimited() to ratelimit PCI separately
  PCI/IOV: Remove group write permission from sriov_numvfs, sriov_drivers_autoprobe
  PCI/IOV: Move sysfs SR-IOV functions to iov.c
  PCI: sysfs: Change permissions from symbolic to octal
  PCI: sysfs: Change DEVICE_ATTR() to DEVICE_ATTR_WO()
  PCI: sysfs: Define device attributes with DEVICE_ATTR*()
  PCI: Mark expected switch fall-through
  PCI: Use devm_add_action_or_reset()

  - Consolidate _HPP & _HPX code in pci-acpi.h and remove unnecessary
    struct hotplug_program_ops (Krzysztof Wilczynski)

  - Fixup PCIe device types to remove the need for dev->has_secondary_link
    (Mika Westerberg)

* pci/enumeration:
  PCI: Get rid of dev->has_secondary_link flag
  PCI: Make pcie_downstream_port() available outside of access.c
  PCI/ACPI: Remove unnecessary struct hotplug_program_ops
  PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.c
  PCI/ACPI: Rename _HPX structs from hpp_* to hpx_*

  - Move many symbols from public linux/pci.h to subsystem-private
    drivers/pci/pci.h (Kelsey Skunberg)

  - Unexport pci_bus_get() and pci_bus_sem since they're not needed by
    modules (Kelsey Skunberg)

  - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg)

* pci/encapsulate:
  PCI: Make pci_set_of_node(), etc private
  PCI: Make pci_enable_ptm() private
  PCI: Make pcie_set_ecrc_checking(), pcie_ecrc_get_policy() private
  PCI: Make pci_ats_init() private
  PCI: Make pcie_update_link_speed() private
  PCI: Make pci_bus_get(), pci_bus_put() private
  PCI: Make pci_hotplug_io_size, mem_size, and bus_size private
  PCI: Make pci_save_vc_state(), pci_restore_vc_state(), etc private
  PCI: Make pci_get_host_bridge_device(), pci_put_host_bridge_device() private
  PCI: Make pci_check_pme_status(), pci_pme_wakeup_bus() private
  PCI: Make PCI_PM_* delay times private
  PCI: Unexport pci_bus_sem
  PCI: Unexport pci_bus_get() and pci_bus_put()
  PCI: Remove pci_block_cfg_access() et al (unused)

  - Consolidate ASPM interfaces in linux/pci.h (Krzysztof Wilczynski)

* pci/aspm:
  PCI: Move ASPM declarations to linux/pci.h

Pull livepatching fix from Jiri Kosina:
 "Error handling fix in livepatching module notifier, from Miroslav
  Benes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch: Nullify obj->mod in klp_module_coming()'s error path

Pull HID updates from Jiri Kosina:

 - syzbot memory corruption fixes for hidraw, Prodikeys, Logitech and
   Sony drivers from Alan Stern and Roderick Colenbrander

 - stuck 'fn' key fix for hid-apple from Joao Moreno

 - proper propagation of EPOLLOUT from hiddev and hidraw, from Fabian
   Henneke

 - fixes for handling power management for intel-ish devices with NO_D3
   flag set, from Zhang Lixu

 - extension of supported usage range for customer page, as some
   Logitech devices are actually making use of it. From Olivier Gay.

 - hid-multitouch is no longer filtering mice node creation, from
   Benjamin Tissoires

 - MobileStudio Pro 13 support, from Ping Cheng

 - a few other device ID additions and assorted smaller fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits)
  HID: core: fix dmesg flooding if report field larger than 32bit
  HID: core: Add printk_once variants to hid_warn() etc
  HID: core: reformat and reduce hid_printk macros
  HID: prodikeys: Fix general protection fault during probe
  HID: wacom: add new MobileStudio Pro 13 support
  HID: sony: Fix memory corruption issue on cleanup.
  HID: i2c-hid: modify quirks for weida's devices
  HID: apple: Fix stuck function keys when using FN
  HID: sb0540: add support for Creative SB0540 IR receivers
  HID: Add quirk for HP X500 PIXART OEM mouse
  HID: logitech-dj: Fix crash when initial logi_dj_recv_query_paired_devices fails
  hid-logitech-dj: add the new Lightspeed receiver
  HID: logitech-dj: add support of the G700(s) receiver
  HID: multitouch: add support for the Smart Tech panel
  HID: multitouch: do not filter mice nodes
  HID: do not call hid_set_drvdata(hdev, NULL) in drivers
  HID: wacom: do not call hid_set_drvdata(hdev, NULL)
  HID: logitech: Fix general protection fault caused by Logitech driver
  HID: hidraw: Fix invalid read in hidraw_ioctl
  HID: wacom: support named keys on older devices
  ...

Pull SafeSetID fix from Micah Morton:
 "Jann Horn sent some patches to fix some bugs in SafeSetID for 5.3.
  After he had done his testing there were a couple small code tweaks
  that went in and caused this bug.

  From what I can see SafeSetID is broken in 5.3 and crashes the kernel
  every time during initialization if you try to use it. I came across
  this bug when backporting Jann's changes for 5.3 to older kernels
  (4.14 and 4.19). I've tested on a Chrome OS device with those kernels
  and verified that this change fixes things.

  It doesn't seem super useful to have this bake in linux-next, since it
  is completely broken in 5.3 and nobody noticed"

* tag 'safesetid-bugfix-5.4' of git://github.com/micah-morton/linux:
  LSM: SafeSetID: Stop releasing uninitialized ruleset

Pull selinux updates from Paul Moore:

 - Add LSM hooks, and SELinux access control hooks, for dnotify,
   fanotify, and inotify watches. This has been discussed with both the
   LSM and fs/notify folks and everybody is good with these new hooks.

 - The LSM stacking changes missed a few calls to current_security() in
   the SELinux code; we fix those and remove current_security() for
   good.

 - Improve our network object labeling cache so that we always return
   the object's label, even when under memory pressure. Previously we
   would return an error if we couldn't allocate a new cache entry, now
   we always return the label even if we can't create a new cache entry
   for it.

 - Convert the sidtab atomic_t counter to a normal u32 with
   READ/WRITE_ONCE() and memory barrier protection.

 - A few patches to policydb.c to clean things up (remove forward
   declarations, long lines, bad variable names, etc)

* tag 'selinux-pr-20190917' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  lsm: remove current_security()
  selinux: fix residual uses of current_security() for the SELinux blob
  selinux: avoid atomic_t usage in sidtab
  fanotify, inotify, dnotify, security: add security hook for fs notifications
  selinux: always return a secid from the network caches if we find one
  selinux: policydb - rename type_val_to_struct_array
  selinux: policydb - fix some checkpatch.pl warnings
  selinux: shuffle around policydb.c to get rid of forward declarations

Pull crypto fixes froim Herbert Xu:
 "This fixes the following issues:

   - potential boot hang in hwrng

   - missing switch/break in talitos

   - bugs and warnings in hisilicon

   - build warning in inside-secure"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: hisilicon - avoid unused function warning
  hwrng: core - don't wait on add_early_randomness()
  crypto: hisilicon - Fix return value check in hisi_zip_acompress()
  crypto: hisilicon - Matching the dma address for dma_pool_free()
  crypto: hisilicon - Fix double free in sec_free_hw_sgl()
  crypto: inside-secure - Fix unused variable warning when CONFIG_PCI=n
  crypto: talitos - fix missing break in switch statement

- MobileStudio Pro 13 support, from Ping Cheng

- a few other assorted fixes
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

- support for Creative SB0540 IR receivers, from Bastien Nocera
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

- support for the Smart Tech panel, from Benjamin Tissoires

- hid-multitouch is no longer filtering mice node creation,
  from Benjamin Tissoires
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

- extension of supported usage range for customer page, as some Logitech
  devices are actually making use of it. From Olivier Gay.

- support for Lightspeed and G700(s) receivers from Filipe Laíns and
  Benjamin Tissoires
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

- fixes for handling power management for intel-ish devices with NO_D3 flag
  set, from Zhang Lixu
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

- proper propagation of EPOLLOUT from hiddev and hidraw, from
  Fabian Henneke
Signed-off-by: Jiri Kosina <jkosina@suse.cz>