- 13 Aug, 2009 40 commits
-
-
Neil Horman authored
skb allocation / consumption corelator - Add config option This patch adds a Kconfig option to enable the addtition of the skb source tracer. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neil Horman authored
skb allocation / cosumption tracer - Add consumption tracepoint This patch adds a tracepoint to skb_copy_datagram_iovec, which is called each time a userspace process copies a frame from a socket receive queue to a user space buffer. It allows us to hook in and examine each sk_buff that the system receives on a per-socket bases, and can be use to compile a list of which skb's were received by which processes. Signed-off-by:
-
Wan ZongShun authored
I fixed up my mac driver, which relatives to previous mac driver actually in the tree. Signed-off-by:
Wan ZongShun <mcuos.com@gmail.com> Signed-off-by:
-
Phil Sutter authored
This also avoids a potential buffer overflow in case the very first receive descriptor fails to allocate, as an index of -1 would be used afterwards. Kudos to Roel Kluin for pointing this out and providing an initial patch. Signed-off-by:
Phil Sutter <n0-1@freewrt.org> Signed-off-by:
-
Phil Sutter authored
The macro DRV_NAME contains "korina", the field dev->name points to the actual interface name. So messages were formerly prefixed with 'korinaeth2:' (on my system). Signed-off-by:
-
Fischer, Anna authored
This patch adds a 'hairpin' (also called 'reflective relay') mode port configuration to the Linux Ethernet bridge kernel module. A bridge supporting hairpin forwarding mode can send frames back out through the port the frame was received on. Hairpin mode is required to support basic VEPA (Virtual Ethernet Port Aggregator) capabilities. You can find additional information on VEPA here: http://tech.groups.yahoo.com/group/evb/ http://www.ieee802.org/1/files/public/docs2009/new-hudson-vepa_seminar-20090514d.pdf http://www.internet2.edu/presentations/jt2009jul/20090719-congdon.pdf An additional patch 'bridge-utils: Add 'hairpin' port forwarding mode' is provided to allow configuring hairpin mode from userspace tools. Signed-off-by:
Paul Congdon <paul.congdon@hp.com> Signed-off-by:
Anna Fischer <anna.fischer@hp.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
roel kluin authored
If dev_alloc_skb() fails on the first iteration of the allocation loop, then we end up writing before the start of the array. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Jens Rosenboom authored
If an interface has multiple addresses, the current message for DAD failure isn't really helpful, so this patch adds the address itself to the printk. Signed-off-by:
Jens Rosenboom <jens@mcbone.net> Signed-off-by:
-
Sarveshwar Bandi authored
Signed-off-by:
sarveshwarb <sarveshwarb@serverengines.com> Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
Yitchak Gertner <gertner@broadcom.com> Signed-off-by:
-
Eilon Greenstein authored
Moving the code to a more logical place and beautifying it. No real change in behavior. Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
-
Eilon Greenstein authored
Change ieee_fc to u16 instead of u32 and re-arrange the link parameters structures Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
-
Eilon Greenstein authored
Disable bmac access while working with emac and keep the single lane SerDes in reset while working with 4 lanes XGXS Signed-off-by:
-
Eilon Greenstein authored
Without this check, when running out of memory, we will see PSOD's in bnx2x_init_fill() when doing a memset(). This is because at that time, bp->gunzip_buf is not pointing to a valid allocated space. Signed-off-by:
Benjamin Li <benli@broadcom.com> Signed-off-by:
-
Eilon Greenstein authored
Moved the dmae_command from the heap to the stack. This will save 56 bytes per bnx2x structure. As a side benefit, we can also reduce the time the dmae_mutex is held. This is because do we not need to hold this mutex when setting up the dmae command. The memory where is dmae command is stored is not a shared resource and doesn not need to be protected. Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
-
Eilon Greenstein authored
Move printing of version from probe to the init function Rather then checking if this is the first module probe call to print the version of the driver only once, the statement is moved to the init function of the module where init is only called once Signed-off-by:
-
Eilon Greenstein authored
The functions bnx2x_get_pcie_width() and bnx2x_get_pcie_speed() were combined into bnx2x_get_pcie_width_speed() so that there is only 1 PCI read to PCICFG_OFFSET + PCICFG_LINK_CONTROL rather then 2 reads. Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
-
Eilon Greenstein authored
In case of error, bnx2x_init_dev calls pci_set_drvdata(pdev, NULL) Signed-off-by:
-
Eilon Greenstein authored
When a given ring is running out of space, the FW can send pause towards the network. When working with multi-queues, when one queue is getting out of space it can block all other queues. The preferred scheme is to send pause frames only when running out of the shared internal chip buffers and if a given queue cannot place a packet on the host, it will drop it. Since some users might want to work in drop-less mode, allowing changing the behavior as a module parameter. Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
-
Eilon Greenstein authored
This is required for NCSI statistics Signed-off-by:
-
Eilon Greenstein authored
This code should not have resided in the driver. Now that we have a new interface, this logic can reside in the application that whishes to upgrade the PHY FW Signed-off-by:
-
Eilon Greenstein authored
There are 3 operations that the driver needs to support to allow applications to access the PHY FW (on top of the MDC/MDIO access). Since those are essentially nvram access commands, adding them to the ethtool -E interface. Signed-off-by:
-
Eilon Greenstein authored
As suggested by Ben Hutchings <bhutchings@solarflare.com>, using the MDC/MDIO IOCTL Signed-off-by:
-
Eilon Greenstein authored
Adding CL73 support to the built in PHY in the 5771x device. Also supporting fallbacks to CL73 if the link partner does not respond. Signed-off-by:
-
Eilon Greenstein authored
The BCM8727 is a dual port PHY. The FW must be loaded in a given order on all designs - including those which swapped the ports (calling port number zero the second port) Signed-off-by:
-
Eilon Greenstein authored
To avoid confusion, if the PHY does not have a FW (and so, no FW version) make sure that the string is NULL. Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
-
Eilon Greenstein authored
The BCM8481 does not generate LASI interrupt for 10M, 100M and 1G link, so we are using LED4 output as the interrupt input to the 57711. This requires some adaptation in the link interrupt routines Signed-off-by:
-
