- 15 Jan, 2020 2 commits
-
-
John Crispin authored
This patch adds the attributes, policy and parsing code to allow userland to send the info about the BSS coloring settings to the kernel. Signed-off-by:
John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20191217141921.8114-1-john@phrozen.org [johannes: remove the strict policy parsing, that was a misunderstanding] Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
This is too low, at least ETSI regulatory domain would allow 36 dBm on 5 GHz in (some? most?) cases. But there's no reason hwsim should have a limit at all, so remove it. See also https://lore.kernel.org/r/20191108152013.13418-1-ramonreisfontes@gmail.com Change-Id: I6edf81d2e82bc8ce7baa40bfc0f210b7b56ef275 Reported-by:
Ramon Fontes <ramonreisfontes@gmail.com> Signed-off-by:
-
- 02 Jan, 2020 2 commits
-
-
Lorenzo Bianconi authored
Improve airtime_flags debugfs handler readability reporting configured airtime flags in both numeric and human readable manner Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/9df7e40b45e95bb0b320317831455beaed1ee3ee.1574872357.git.lorenzo@kernel.org [remove AQL since it's no longer there] Signed-off-by:
-
Johannes Berg authored
Merging to get the mac80211 updates that have since propagated into net-next. Signed-off-by:
-
- 01 Jan, 2020 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2019-12-31 This series contains updates to e1000e, igb and igc only. Robert Beckett provide an igb change to assist in keeping packets from being dropped due to receive descriptor ring being full when receive flow control is enabled. Create a separate function to setup SRRCTL to ease in reuse and ensure that setting of the drop enable bit only if receive flow control is not enabled. Sasha adds support for scatter gather support in igc. Improve the direct memory address mapping flow by optimizing/simplifying and more clear. Update igc to use pci_release_mem_regions() instead of pci_release_selected_regions(). Clean up function header comments to align with the actual code. Adds support for 64 bit DMA access, to help handle socket buffer fragments in high memory. Adds legacy power management support in igc by implementing suspend, resume, runtime_suspend/resume, and runtime_idle callbacks. Clean up references to Serdes interface in igc since that interface is not supported for i225 devices. Alex replaces the pr_info calls with netdev_info in all cases related to netdev link state, as suggested by Joe Perches. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
- 31 Dec, 2019 30 commits
-
-
Sasha Neftin authored
Serdes interface is not applicable for i225 devices. Remove this from comments and make comments more clearly. Signed-off-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
Replace the pr_info calls with netdev_info in all cases related to the netdevice link state. As a result of this patch the link messages will change as shown below. Before: e1000e: ens3 NIC Link is Down e1000e: ens3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx After: e1000e 0000:00:03.0 ens3: NIC Link is Down e1000e 0000:00:03.0 ens3: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Tested-by:
-
Sasha Neftin authored
Add suspend, resume, runtime_suspend, runtime_resume and runtime_idle callbacks implementation. Reported-by:
kbuild test robot <lpk@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller authored
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: -
Sasha Neftin authored
On relevant platforms ndo_start_xmit can handle socket buffer fragments in high memory Signed-off-by:
-
Sasha Neftin authored
igc_watchdog, igc_set_interrupt_capability, igc_init_interrupt_scheme, __igc_open and __igc_close parameter descriptions has not reflected functions meaning. Add meaningful description. Signed-off-by:
-
Sasha Neftin authored
The function description for igc_alloc_rx_buffers has not reflected the function meaning. Add meaningful description. Signed-off-by:
-
Sasha Neftin authored
The function description for igc_is_non_eop includes an extra @skb parameter description. This parameter doesn't exist on the function, so remove it. Suggested-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
Sasha Neftin authored
Use the pci_release_mem_regions method instead of the pci_release_selected_regions method Signed-off-by:
-
Sasha Neftin authored
Improve the probe flow and set both the DMA mask and the coherent to the same thing. Make the flow optimized and cleared. Signed-off-by:
-
Sasha Neftin authored
Scatter gather is used to do DMA data transfers of data that is written to noncontiguous areas of memory. This patch enables scatter gather support. Signed-off-by:
-
Robert Beckett authored
If Rx flow control has been enabled (via autoneg or forced), packets should not be dropped due to Rx descriptor ring exhaustion. Instead pause frames should be used to apply back pressure. This only applies if VFs are not in use. Move SRRCTL setup to its own function for easy reuse and only set drop enable bit if Rx flow control is not enabled. Since v1: always enable dropping of packets if VFs in use. Signed-off-by:
Robert Beckett <bob.beckett@collabora.com> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix big endian overflow in nf_flow_table, from Arnd Bergmann. 2) Fix port selection on big endian in nft_tproxy, from Phil Sutter. 3) Fix precision tracking for unbound scalars in bpf verifier, from Daniel Borkmann. 4) Fix integer overflow in socket rcvbuf check in UDP, from Antonio Messina. 5) Do not perform a neigh confirmation during a pmtu update over a tunnel, from Hangbin Liu. 6) Fix DMA mapping leak in dpaa_eth driver, from Madalin Bucur. 7) Various PTP fixes for sja1105 dsa driver, from Vladimir Oltean. 8) Add missing to dummy definition of of_mdiobus_child_is_phy(), from Geert Uytterhoeven * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits) hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename() net/sched: add delete_empty() to filters and use it in cls_flower tcp: Fix highest_sack and highest_sack_seq ptp: fix the race between the release of ptp_clock and cdev net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/S Documentation: net: dsa: sja1105: Remove text about taprio base-time limitation net: dsa: sja1105: Remove restriction of zero base-time for taprio offload net: dsa: sja1105: Really make the PTP command read-write net: dsa: sja1105: Take PTP egress timestamp by port, not mgmt slot cxgb4/cxgb4vf: fix flow control display for auto negotiation mlxsw: spectrum: Use dedicated policer for VRRP packets mlxsw: spectrum_router: Skip loopback RIFs during MAC validation net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs net/sched: act_mirred: Pull mac prior redir to non mac_header_xmit device net_sched: sch_fq: properly set sk->sk_pacing_status bnx2x: Fix accounting of vlan resources among the PFs bnx2x: Use appropriate define for vlan credit of: mdio: Add missing inline to of_mdiobus_child_is_phy() dummy net: phy: aquantia: add suspend / resume ops for AQR105 dpaa_eth: fix DMA mapping leak ... -
git://git.osdn.net/gitroot/tomoyo/tomoyo-test1Linus Torvalds authored
Pull tomoyo fixes from Tetsuo Handa: "Two bug fixes: - Suppress RCU warning at list_for_each_entry_rcu() - Don't use fancy names on sockets" * tag 'tomoyo-fixes-for-5.5' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1: tomoyo: Suppress RCU warning at list_for_each_entry_rcu(). tomoyo: Don't use nifty names on sockets.
-
Taehee Yoo authored
hsr slave interfaces don't have debugfs directory. So, hsr_debugfs_rename() shouldn't be called when hsr slave interface name is changed. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 ip link set dummy0 name ap Splat looks like: [21071.899367][T22666] ap: renamed from dummy0 [21071.914005][T22666] ================================================================== [21071.919008][T22666] BUG: KASAN: slab-out-of-bounds in hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.923640][T22666] Read of size 8 at addr ffff88805febcd98 by task ip/22666 [21071.926941][T22666] [21071.927750][T22666] CPU: 0 PID: 22666 Comm: ip Not tainted 5.5.0-rc2+ #240 [21071.929919][T22666] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [21071.935094][T22666] Call Trace: [21071.935867][T22666] dump_stack+0x96/0xdb [21071.936687][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.937774][T22666] print_address_description.constprop.5+0x1be/0x360 [21071.939019][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.940081][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.940949][T22666] __kasan_report+0x12a/0x16f [21071.941758][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.942674][T22666] kasan_report+0xe/0x20 [21071.943325][T22666] hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.944187][T22666] hsr_netdev_notify+0x1fe/0x9b0 [hsr] [21071.945052][T22666] ? __module_text_address+0x13/0x140 [21071.945897][T22666] notifier_call_chain+0x90/0x160 [21071.946743][T22666] dev_change_name+0x419/0x840 [21071.947496][T22666] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [21071.948600][T22666] ? netdev_adjacent_rename_links+0x280/0x280 [21071.949577][T22666] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [21071.950672][T22666] ? lock_downgrade+0x6e0/0x6e0 [21071.951345][T22666] ? do_setlink+0x811/0x2ef0 [21071.951991][T22666] do_setlink+0x811/0x2ef0 [21071.952613][T22666] ? is_bpf_text_address+0x81/0xe0 [ ... ] Reported-by: syzbot+9328206518f08318a5fd@syzkaller.appspotmail.com Fixes: 4c2d5e33 ("hsr: rename debugfs file when interface name is changed") Signed-off-by:Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Davide Caratti authored
Revert "net/sched: cls_u32: fix refcount leak in the error path of u32_change()", and fix the u32 refcount leak in a more generic way that preserves the semantic of rule dumping. On tc filters that don't support lockless insertion/removal, there is no need to guard against concurrent insertion when a removal is in progress. Therefore, for most of them we can avoid a full walk() when deleting, and just decrease the refcount, like it was done on older Linux kernels. This fixes situations where walk() was wrongly detecting a non-empty filter, like it happened with cls_u32 in the error path of change(), thus leading to failures in the following tdc selftests: 6aa7: (filter, u32) Add/Replace u32 with source match and invalid indev 6658: (filter, u32) Add/Replace u32 with custom hash table and invalid handle 74c2: (filter, u32) Add/Replace u32 filter with invalid hash table id On cls_flower, and on (future) lockless filters, this check is necessary: move all the check_empty() logic in a callback so that each filter can have its own implementation. For cls_flower, it's sufficient to check if no IDRs have been allocated. This reverts commit 275c44aa. Changes since v1: - document the need for delete_empty() when TCF_PROTO_OPS_DOIT_UNLOCKED is used, thanks to Vlad Buslov - implement delete_empty() without doing fl_walk(), thanks to Vlad Buslov - squash revert and new fix in a single patch, to be nice with bisect tests that run tdc on u32 filter, thanks to Dave Miller Fixes: 275c44aa ("net/sched: cls_u32: fix refcount leak in the error path of u32_change()") Fixes: 6676d5e4 ("net: sched: set dedicated tcf_walker flag when tp is empty") Suggested-by:
Jamal Hadi Salim <jhs@mojatatu.com> Suggested-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
-
Vijay Khemka authored
gma_flag was set at the time of GMA command request but it should only be set after getting successful response. Movinng this flag setting in GMA response handler. This flag is used mainly for not repeating GMA command once received MAC address. Signed-off-by:
Vijay Khemka <vijaykhemka@fb.com> Reviewed-by:
Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by:
-
Kevin Kou authored
sctp_outq_sack is the main function handles SACK, it is called very frequently. As the commit "move trace_sctp_probe_path into sctp_outq_sack" added below code to this function, sctp tracepoint is disabled most of time, but the loop of transport list will be always called even though the tracepoint is disabled, this is unnecessary. + /* SCTP path tracepoint for congestion control debugging. */ + list_for_each_entry(transport, transport_list, transports) { + trace_sctp_probe_path(transport, asoc); + } This patch is to add tracepoint enabled check at outside of the loop of transport list, and avoid traversing the loop when trace is disabled, it is a small optimization. Signed-off-by:Kevin Kou <qdkevin.kou@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Improvements to SJA1105 DSA RX timestamping This series makes the sja1105 DSA driver use a dedicated kernel thread for RX timestamping, a process which is time-sensitive and otherwise a bit fragile. This allows users to customize their system (probabil an embedded PTP switch) fully and allocate the CPU bandwidth for the driver to expedite the RX timestamps as quickly as possible. While doing this conversion, add a function to the PTP core for cancelling this kernel thread (function which I found rather strange to be missing). ==================== Signed-off-by: -
Vladimir Oltean authored
When disabling PTP timestamping, don't reset the switch with the new static config until all existing PTP frames have been timestamped on the RX path or dropped. There's nothing we can do with these afterwards. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
And move the queue of skb's waiting for RX timestamps into the ptp_data structure, since it isn't needed if PTP is not compiled. Signed-off-by:
-
Vladimir Oltean authored
In order to effectively use the PTP kernel thread for tasks such as timestamping packets, allow the user control over stopping it, which is needed e.g. when the timestamping queues must be drained. Signed-off-by:
-
Cambda Zhu authored
>From commit 50895b9d ("tcp: highest_sack fix"), the logic about setting tp->highest_sack to the head of the send queue was removed. Of course the logic is error prone, but it is logical. Before we remove the pointer to the highest sack skb and use the seq instead, we need to set tp->highest_sack to NULL when there is no skb after the last sack, and then replace NULL with the real skb when new skb inserted into the rtx queue, because the NULL means the highest sack seq is tp->snd_nxt. If tp->highest_sack is NULL and new data sent, the next ACK with sack option will increase tp->reordering unexpectedly. This patch sets tp->highest_sack to the tail of the rtx queue if it's NULL and new data is sent. The patch keeps the rule that the highest_sack can only be maintained by sack processing, except for this only case. Fixes: 50895b9d ("tcp: highest_sack fix") Signed-off-by:
Cambda Zhu <cambda@linux.alibaba.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Vladis Dronov authored
In a case when a ptp chardev (like /dev/ptp0) is open but an underlying device is removed, closing this file leads to a race. This reproduces easily in a kvm virtual machine: ts# cat openptp0.c int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); } ts# uname -r 5.5.0-rc3-46cf053e ts# cat /proc/cmdline ... slub_debug=FZP ts# modprobe ptp_kvm ts# ./openptp0 & [1] 670 opened /dev/ptp0, sleeping 10s... ts# rmmod ptp_kvm ts# ls /dev/ptp* ls: cannot access '/dev/ptp*': No such file or directory ts# ...woken up [ 48.010809] general protection fault: 0000 [#1] SMP [ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25 [ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80 [ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202 [ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0 [ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b [ 48.019470] ... ^^^ a slub poison [ 48.023854] Call Trace: [ 48.024050] __fput+0x21f/0x240 [ 48.024288] task_work_run+0x79/0x90 [ 48.024555] do_exit+0x2af/0xab0 [ 48.024799] ? vfs_write+0x16a/0x190 [ 48.025082] do_group_exit+0x35/0x90 [ 48.025387] __x64_sys_exit_group+0xf/0x10 [ 48.025737] do_syscall_64+0x3d/0x130 [ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 48.026479] RIP: 0033:0x7f53b12082f6 [ 48.026792] ... [ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm] [ 48.045001] Fixing recursive fault but reboot is needed! This happens in: static void __fput(struct file *file) { ... if (file->f_op->release) file->f_op->release(inode, file); <<< cdev is kfree'd here if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL && !(mode & FMODE_PATH))) { cdev_put(inode->i_cdev); <<< cdev fields are accessed here Namely: __fput() posix_clock_release() kref_put(&clk->kref, delete_clock) <<< the last reference delete_clock() delete_ptp_clock() kfree(ptp) <<< cdev is embedded in ptp cdev_put module_put(p->owner) <<< *p is kfree'd, bang! Here cdev is embedded in posix_clock which is embedded in ptp_clock. The race happens because ptp_clock's lifetime is controlled by two refcounts: kref and cdev.kobj in posix_clock. This is wrong. Make ptp_clock's sysfs device a parent of cdev with cdev_device_add() created especially for such cases. This way the parent device with its ptp_clock is not released until all references to the cdev are released. This adds a requirement that an initialized but not exposed struct device should be provided to posix_clock_register() by a caller instead of a simple dev_t. This approach was adopted from the commit 72139dfa ("watchdog: Fix the race between the release of watchdog_core_data and cdev"). See details of the implementation in the commit 233ed09d ("chardev: add helper function to register char devs with a struct device"). Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#uAnalyzed-by:Stephen Johnston <sjohnsto@redhat.com> Analyzed-by:
Vern Lovejoy <vlovejoy@redhat.com> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
For first-generation switches (SJA1105E and SJA1105T): - TPID means C-Tag (typically 0x8100) - TPID2 means S-Tag (typically 0x88A8) While for the second generation switches (SJA1105P, SJA1105Q, SJA1105R, SJA1105S) it is the other way around: - TPID means S-Tag (typically 0x88A8) - TPID2 means C-Tag (typically 0x8100) In other words, E/T tags untagged traffic with TPID, and P/Q/R/S with TPID2. So the patch mentioned below fixed VLAN filtering for P/Q/R/S, but broke it for E/T. We strive for a common code path for all switches in the family, so just lie in the static config packing functions that TPID and TPID2 are at swapped bit offsets than they actually are, for P/Q/R/S. This will make both switches understand TPID to be ETH_P_8021Q and TPID2 to be ETH_P_8021AD. The meaning from the original E/T was chosen over P/Q/R/S because E/T is actually the one with public documentation available (UM10944.pdf). Fixes: f9a1a764 ("net: dsa: sja1105: Reverse TPID and TPID2") Signed-off-by:
-
Vladimir Oltean authored
Since commit 86db36a3 ("net: dsa: sja1105: Implement state machine for TAS with PTP clock source"), this paragraph is no longer true. So remove it. Signed-off-by:
-
Vladimir Oltean authored
The check originates from the initial implementation which was not based on PTP time but on a standalone clock source. In the meantime we can now program the PTPSCHTM register at runtime with the dynamic base time (actually with a value that is 200 ns smaller, to avoid writing DELTA=0 in the Schedule Entry Points Parameters Table). And we also have logic for moving the actual base time in the future of the PHC's current time base, so the check for zero serves no purpose, since even if the user will specify zero, that's not what will end up in the static config table where the limitation is. Fixes: 86db36a3 ("net: dsa: sja1105: Implement state machine for TAS with PTP clock source") Signed-off-by:
-
Vladimir Oltean authored
When activating tc-taprio offload on the switch ports, the TAS state machine will try to check whether it is running or not, but will find both the STARTED and STOPPED bits as false in the sja1105_tas_check_running function. So the function will return -EINVAL (an abnormal situation) and the kernel will keep printing this from the TAS FSM workqueue: [ 37.691971] sja1105 spi0.1: An operation returned -22 The reason is that the underlying function that gets called, sja1105_ptp_commit, does not actually do a SPI_READ, but a SPI_WRITE. So the command buffer remains initialized with zeroes instead of retrieving the hardware state. Fix that. Fixes: 41603d78 ("net: dsa: sja1105: Make the PTP command read-write") Signed-off-by:
-
Vladimir Oltean authored
The PTP egress timestamp N must be captured from register PTPEGR_TS[n], where n = 2 * PORT + TSREG. There are 10 PTPEGR_TS registers, 2 per port. We are only using TSREG=0. As opposed to the management slots, which are 4 in number (SJA1105_NUM_PORTS, minus the CPU port). Any management frame (which includes PTP frames) can be sent to any non-CPU port through any management slot. When the CPU port is not the last port (#4), there will be a mismatch between the slot and the port number. Luckily, the only mainline occurrence with this switch (arch/arm/boot/dts/ls1021a-tsn.dts) does have the CPU port as #4, so the issue did not manifest itself thus far. Fixes: 47ed985e ("net: dsa: sja1105: Add logic for TX timestamping") Signed-off-by:
-
Christophe JAILLET authored
'eth_zero_addr()' is already called in the error handling path. This is harmless, but there is no point in calling it twice, so remove one. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
- 30 Dec, 2019 3 commits
-
-
Eric Dumazet authored
Neal Cardwell suggested to not change ca->delay_min and apply the ack delay cushion only when Hystart ACK train is still under consideration. This should avoid a 64bit divide unless needed. Tested: 40Gbit(mlx4) testbed (with sch_fq as packet scheduler) $ echo -n 'file tcp_cubic.c +p' >/sys/kernel/debug/dynamic_debug/control $ nstat -n;for f in {1..10}; do ./super_netperf 1 -H lpaa24 -l -4000000; done;nstat|egrep "Hystart" 14815 16280 15293 15563 11574 15145 14789 18548 16972 12520 TcpExtTCPHystartTrainDetect 10 0.0 TcpExtTCPHystartTrainCwnd 1396 0.0 $ dmesg | tail -10 [ 4873.951350] hystart_ack_train (116 > 93) delay_min 24 (+ ack_delay 69) cwnd 80 [ 4875.155379] hystart_ack_train (55 > 50) delay_min 21 (+ ack_delay 29) cwnd 160 [ 4876.333921] hystart_ack_train (69 > 62) delay_min 23 (+ ack_delay 39) cwnd 130 [ 4877.519037] hystart_ack_train (69 > 60) delay_min 22 (+ ack_delay 38) cwnd 130 [ 4878.701559] hystart_ack_train (87 > 63) delay_min 24 (+ ack_delay 39) cwnd 160 [ 4879.844597] hystart_ack_train (93 > 50) delay_min 21 (+ ack_delay 29) cwnd 216 [ 4880.956650] hystart_ack_train (74 > 67) delay_min 20 (+ ack_delay 47) cwnd 108 [ 4882.098500] hystart_ack_train (61 > 57) delay_min 23 (+ ack_delay 34) cwnd 130 [ 4883.262056] hystart_ack_train (72 > 67) delay_min 21 (+ ack_delay 46) cwnd 130 [ 4884.418760] hystart_ack_train (74 > 67) delay_min 29 (+ ack_delay 38) cwnd 152 10Gbit(bnx2x) testbed (with sch_fq as packet scheduler) $ echo -n 'file tcp_cubic.c +p' >/sys/kernel/debug/dynamic_debug/control $ nstat -n;for f in {1..10}; do ./super_netperf 1 -H lpk52 -l -4000000; done;nstat|egrep "Hystart" 7050 7065 7100 6900 7202 7263 7189 6869 7463 7034 TcpExtTCPHystartTrainDetect 10 0.0 TcpExtTCPHystartTrainCwnd 3199 0.0 $ dmesg | tail -10 [ 176.920012] hystart_ack_train (161 > 141) delay_min 83 (+ ack_delay 58) cwnd 264 [ 179.144645] hystart_ack_train (164 > 159) delay_min 120 (+ ack_delay 39) cwnd 444 [ 181.354527] hystart_ack_train (214 > 168) delay_min 125 (+ ack_delay 43) cwnd 436 [ 183.539565] hystart_ack_train (170 > 147) delay_min 96 (+ ack_delay 51) cwnd 326 [ 185.727309] hystart_ack_train (177 > 160) delay_min 61 (+ ack_delay 99) cwnd 128 [ 187.947142] hystart_ack_train (184 > 167) delay_min 123 (+ ack_delay 44) cwnd 367 [ 190.166680] hystart_ack_train (230 > 153) delay_min 116 (+ ack_delay 37) cwnd 444 [ 192.327285] hystart_ack_train (210 > 206) delay_min 86 (+ ack_delay 120) cwnd 152 [ 194.511392] hystart_ack_train (173 > 151) delay_min 94 (+ ack_delay 57) cwnd 239 [ 196.736023] hystart_ack_train (149 > 146) delay_min 105 (+ ack_delay 41) cwnd 399 Fixes: 42f3a8aa ("tcp_cubic: tweak Hystart detection for short RTT flows") Signed-off-by:Neal Cardwell <ncardwell@google.com> Link: https://www.spinics.net/lists/netdev/msg621886.html Link: https://www.spinics.net/lists/netdev/msg621797.htmlAcked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Rahul Lakkireddy authored
As per 802.3-2005, Section Two, Annex 28B, Table 28B-2 [1], when _only_ Rx pause is enabled, both symmetric and asymmetric pause towards local device must be enabled. Also, firmware returns the local device's flow control pause params as part of advertised capabilities and negotiated params as part of current link attributes. So, fix up ethtool's flow control pause params fetch logic to read from acaps, instead of linkattr. [1] https://standards.ieee.org/standard/802_3-2005.html Fixes: c3168cab ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Signed-off-by:
Surendra Mobiya <surendra@chelsio.com> Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Remove #ifdef pollution around nf_ingress(), from Lukas Wunner. 2) Document ingress hook in netdevice, also from Lukas. 3) Remove htons() in tunnel metadata port netlink attributes, from Xin Long. 4) Missing erspan netlink attribute validation also from Xin Long. 5) Missing erspan version in tunnel, from Xin Long. 6) Missing attribute nest in NFTA_TUNNEL_KEY_OPTS_{VXLAN,ERSPAN} Patch from Xin Long. 7) Missing nla_nest_cancel() in tunnel netlink dump path, from Xin Long. 8) Remove two exported conntrack symbols with no clients, from Florian Westphal. 9) Add nft_meta_get_eval_time() helper to nft_meta, from Florian. 10) Add nft_meta_pkttype helper for loopback, also from Florian. 11) Add nft_meta_socket uid helper, from Florian Westphal. 12) Add nft_meta_cgroup helper, from Florian. 13) Add nft_meta_ifkind helper, from Florian. 14) Group all interface related meta selector, from Florian. 15) Add nft_prandom_u32() helper, from Florian. 16) Add nft_meta_rtclassid helper, from Florian. 17) Add support for matching on the slave device index, from Florian. This batch, among other things, contains updates for the netfilter tunnel netlink interface: This extension is still incomplete and lacking proper userspace support which is actually my fault, I did not find the time to go back and finish this. This update is breaking tunnel UAPI in some aspects to fix it but do it better sooner than never. ==================== Signed-off-by:
-
- 29 Dec, 2019 2 commits
-
-
Linus Torvalds authored
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Couple of fixes This patch set contains two fixes for mlxsw. Please consider both for stable. Patch #1 from Amit fixes a wrong check during MAC validation when creating router interfaces (RIFs). Given a particular order of configuration this can result in the driver refusing to create new RIFs. Patch #2 fixes a wrong trap configuration in which VRRP packets and routing exceptions were policed by the same policer towards the CPU. In certain situations this can prevent VRRP packets from reaching the CPU. ==================== Signed-off-by:
-
