- 16 Aug, 2017 40 commits
-
-
stephen hemminger authored
The only usage of vmbus_sendpacket_ctl was by vmbus_sendpacket. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
The function vmbus_sendpacket_pagebuffer_ctl was never used directly. Just have vmbus_send_pagebuffer Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
This function is not used anywhere in current code. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
John Fastabend says: ==================== bpf: sockmap build fixes Two build fixes for sockmap, this should resolve the build errors and warnings that were reported. Thanks everyone. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
Resolve issues with !CONFIG_BPF_SYSCALL and !STREAM_PARSER net/core/filter.c: In function ‘do_sk_redirect_map’: net/core/filter.c:1881:3: error: implicit declaration of function ‘__sock_map_lookup_elem’ [-Werror=implicit-function-declaration] sk = __sock_map_lookup_elem(ri->map, ri->ifindex); ^ net/core/filter.c:1881:6: warning: assignment makes pointer from integer without a cast [enabled by default] sk = __sock_map_lookup_elem(ri->map, ri->ifindex); Fixes: 174a79ff ("bpf: sockmap with sk redirect support") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
psock will uninitialized in default case we need to do the same psock lookup and check as in other branch. Fixes compile warning below. kernel/bpf/sockmap.c: In function ‘smap_state_change’: kernel/bpf/sockmap.c:156:21: warning: ‘psock’ may be used uninitialized in this function [-Wmaybe-uninitialized] struct smap_psock *psock; Fixes: 174a79ff ("bpf: sockmap with sk redirect support") Reported-by: David Miller <davem@davemloft.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
I made a stupid mistake using TC_CLSFLOWER_STATS instead of TC_SETUP_CLSFLOWER. Funny thing is that both are defined as "2" so it actually did not cause any harm. Anyway, fixing it now. Fixes: 2572ac53 ("net: sched: make type an argument for ndo_setup_tc") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
tun_build_skb() is not thread safe since it uses per queue page frag, this will break things when multiple threads are sending through same queue. Switch to use per-thread generator (no lock involved). Fixes: 66ccbc9c ("tap: use build_skb() for small packet") Tested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trivial fix to spelling mistakes in the mlx4 driver Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
The main purpose of this tracepoint is to monitor bulk dequeue in the network qdisc layer, as it cannot be deducted from the existing qdisc stats. The txq_state can be used for determining the reason for zero packet dequeues, see enum netdev_queue_state_t. Notice all packets doesn't necessary activate this tracepoint. As qdiscs with flag TCQ_F_CAN_BYPASS, can directly invoke sch_direct_xmit() when qdisc_qlen is zero. Remember that perf record supports filters like: perf record -e qdisc:qdisc_dequeue \ --filter 'ifindex == 4 && (packets > 1 || txq_state > 0)' Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Simon Horman says: ==================== nfp: process MTU updates from firmware flower app The first patch of this series moves processing of control messages from a BH handler to a workqueue. That change makes it safe to process MTU updates from the firmware which is added by the second patch of this series. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Simon Horman authored
Now that control message processing occurs in a workqueue rather than a BH handler MTU updates received from the firmware may be safely processed. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Simon Horman authored
Processing of control messages is not time-critical and future processing of some messages will require taking the RTNL which is not possible in a BH handler. It seems simplest to move all control message processing to a workqueue. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
In the devmap alloc map logic we check to ensure that the sizeof the values are not greater than KMALLOC_MAX_SIZE. But, in the dev map case we ensure the value size is 4bytes earlier in the function because all values should be netdev ifindex values. The second check is harmless but is not needed so remove it. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
John Fastabend says: ==================== BPF: sockmap and sk redirect support This series implements a sockmap and socket redirect helper for BPF using a model similar to XDP netdev redirect. A sockmap is a BPF map type that holds references to sock structs. Then with a new sk redirect bpf helper BPF programs can use the map to redirect skbs between sockets, bpf_sk_redirect_map(map, key, flags) Finally, we need a call site to attach our BPF logic to do socket redirects. We added hooks to recv_sock using the existing strparser infrastructure to do this. The call site is added via the BPF attach map call. To enable users to use this infrastructure a new BPF program BPF_PROG_TYPE_SK_SKB is created that allows users to reference sock details, such as port and ip address fields, to build useful socket layer program. The sockmap datapath is as follows, recv -> strparser -> verdict/action where this series implements the drop and redirect actions. Additional, actions can be added as needed. A sample program is provided to illustrate how a sockmap can be integrated with cgroups and used to add/delete sockets in a sockmap. The program is simple but should show many of the key ideas. To test this work test_maps in selftests/bpf was leveraged. We added a set of tests to add sockets and do send/recv ops on the sockets to ensure correct behavior. Additionally, the selftests tests a series of negative test cases. We can expand on this in the future. I also have a basic test program I use with iperf/netperf clients that could be sent as an additional sample if folks want this. It needs a bit of cleanup to send to the list and wasn't included in this series. For people who prefer git over pulling patches out of their mail editor I've posted the code here, https://github.com/jrfastab/linux-kernel-xdp/tree/sockmap For some background information on the genesis of this work it might be helpful to review these slides from netconf 2017 by Thomas Graf, http://vger.kernel.org/netconf2017.html https://docs.google.com/a/covalent.io/presentation/d/1dwSKSBGpUHD3WO5xxzZWj8awV_-xL-oYhvqQMOBhhtk/edit?usp=sharing Thanks to Daniel Borkmann for reviewing and providing initial feedback. ==================== Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
This generates a set of sockets, attaches BPF programs, and sends some simple traffic using basic send/recv pattern. Additionally, we do a bunch of negative tests to ensure adding/removing socks out of the sockmap fail correctly. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
This adds tests to access new __sk_buff members from sk skb program type. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
This program binds a program to a cgroup and then matches hard coded IP addresses and adds these to a sockmap. This will receive messages from the backend and send them to the client. client:X <---> frontend:10000 client:X <---> backend:10001 To keep things simple this is only designed for 1:1 connections using hard coded values. A more complete example would allow many backends and clients. To run, # sockmap <cgroup2_dir> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
Recently we added a new map type called dev map used to forward XDP packets between ports (6093ec2d). This patches introduces a similar notion for sockets. A sockmap allows users to add participating sockets to a map. When sockets are added to the map enough context is stored with the map entry to use the entry with a new helper bpf_sk_redirect_map(map, key, flags) This helper (analogous to bpf_redirect_map in XDP) is given the map and an entry in the map. When called from a sockmap program, discussed below, the skb will be sent on the socket using skb_send_sock(). With the above we need a bpf program to call the helper from that will then implement the send logic. The initial site implemented in this series is the recv_sock hook. For this to work we implemented a map attach command to add attributes to a map. In sockmap we add two programs a parse program and a verdict program. The parse program uses strparser to build messages and pass them to the verdict program. The parse programs use the normal strparser semantics. The verdict program is of type SK_SKB. The verdict program returns a verdict SK_DROP, or SK_REDIRECT for now. Additional actions may be added later. When SK_REDIRECT is returned, expected when bpf program uses bpf_sk_redirect_map(), the sockmap logic will consult per cpu variables set by the helper routine and pull the sock entry out of the sock map. This pattern follows the existing redirect logic in cls and xdp programs. This gives the flow, recv_sock -> str_parser (parse_prog) -> verdict_prog -> skb_send_sock \ -> kfree_skb As an example use case a message based load balancer may use specific logic in the verdict program to select the sock to send on. Sample programs are provided in future patches that hopefully illustrate the user interfaces. Also selftests are in follow-on patches. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
bpf_prog_inc_not_zero will be used by upcoming sockmap patches this patch simply exports it so we can pull it in. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
A class of programs, run from strparser and soon from a new map type called sock map, are used with skb as the context but on established sockets. By creating a specific program type for these we can use bpf helpers that expect full sockets and get the verifier to ensure these helpers are not used out of context. The new type is BPF_PROG_TYPE_SK_SKB. This patch introduces the infrastructure and type. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
A couple fixes to new skb_send_sock infrastructure. However, no users currently exist for this code (adding user in next handful of patches) so it should not be possible to trigger a panic with existing in-kernel code. Fixes: 306b13eb ("proto_ops: Add locked held versions of sendmsg and sendpage") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
To complete the sendmsg_locked and sendpage_locked implementation add the hooks for af_inet6 as well. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
It is useful to allow strparser to init sockets before the read_sock callback has been established. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
pnp_device_id are not supposed to change at runtime. All functions working with pnp_device_id provided by <linux/pnp.h> work with const pnp_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Veerasenareddy Burru authored
A VF's MTU is capped at the parent PF's MTU. So if there's a change in the PF's MTU, then update the VF's netdev->max_mtu. Also remove duplicate log messages for MTU change. Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Stephen Hemminger says: ==================== net: various sizeof cleanups Noticed some places that were using sizeof as an operator. This is legal C but is not the convention used in the kernel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
The kernel coding style is to treat sizeof as a function (ie. with parenthesis) not as an operator. Also use kcalloc and kmalloc_array Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Kernel coding style is to put paren around operand of sizeof. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Although sizeof is an operator in C. The kernel coding style convention is to always use it like a function and add parenthesis. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Konstantin Khlebnikov authored
Any move comment abount update_vf() into right place. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Konstantin Khlebnikov authored
This callback is used for deactivating class in parent qdisc. This is cheaper to test queue length right here. Also this allows to catch draining screwed backlog and prevent second deactivation of already inactive parent class which will crash kernel for sure. Kernel with print warning at destruction of child qdisc where no packets but backlog is not zero. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Intiyaz Basha says: ==================== liquidio: adding support for ethtool --set-channels feature Code reorganization is required for adding ethtool --set-channels feature. First three patches are for code reorganization. The last patch is for adding this feature. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Intiyaz Basha authored
adding support for ethtool --set-channels feature Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Intiyaz Basha authored
Moving common octeon_setup_interrupt to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Intiyaz Basha authored
Moving liquidio_legacy_intr_handler to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Intiyaz Basha authored
Moving common liquidio_msix_intr_handler to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-