Pull i2c fixes from Wolfram Sang:
 "Two runtime PM fixes and one leak fix"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: iop3xx: Fix memory leak in probe error path
  i2c: tegra: Properly disable runtime PM on driver's probe error
  i2c: tegra: Fix suspending in active runtime PM state

Pull MTD fixes from Miquel Raynal:
 "Raw NAND:
   - GPMI: Fix the suspend/resume

  SPI-NOR:
   - Fix quad enable on Spansion like flashes
   - Fix selection of 4-byte addressing opcodes on Spansion"

* tag 'mtd/fixes-for-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: gpmi: Restore nfc timing setup after suspend/resume
  mtd: rawnand: gpmi: Fix suspend/resume problem
  mtd: spi-nor: Fix quad enable for Spansion like flashes
  mtd: spi-nor: Fix selection of 4-byte addressing opcodes on Spansion

Pull drm fixes from Dave Airlie:
 "Back from LCA2020, fixes wasn't too busy last week, seems to have
  quieten down appropriately, some amdgpu, i915, then a core mst fix and
  one fix for virtio-gpu and one for rockchip:

  core mst:
   - serialize down messages and clear timeslots are on unplug

  amdgpu:
   - Update golden settings for renoir
   - eDP fix

  i915:
   - uAPI fix: Remove dash and colon from PMU names to comply with
     tools/perf
   - Fix for include file that was indirectly included
   - Two fixes to make sure VMA are marked active for error capture

  virtio:
   - maintain obj reservation lock when submitting cmds

  rockchip:
   - increase link rate var size to accommodate rates"

* tag 'drm-fixes-2020-01-19' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Reorder detect_edp_sink_caps before link settings read.
  drm/amdgpu: update goldensetting for renoir
  drm/dp_mst: Have DP_Tx send one msg at a time
  drm/dp_mst: clear time slots for ports invalid
  drm/i915/pmu: Do not use colons or dashes in PMU names
  drm/rockchip: fix integer type used for storing dp data rate
  drm/i915/gt: Mark ring->vma as active while pinned
  drm/i915/gt: Mark context->state vma as active while pinned
  drm/i915/gt: Skip trying to unbind in restore_ggtt_mappings
  drm/i915: Add missing include file <linux/math64.h>
  drm/virtio: add missing virtio_gpu_array_lock_resv call

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - a resctrl fix for uninitialized objects found by debugobjects

   - a resctrl memory leak fix

   - fix the unintended re-enabling of the of SME and SEV CPU flags if
     memory encryption was disabled at bootup via the MSR space"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/CPU/AMD: Ensure clearing of SME/SEV features is maintained
  x86/resctrl: Fix potential memory leak
  x86/resctrl: Fix an imbalance in domain_remove_cpu()

Pull timer fixes from Ingo Molnar:
 "Three fixes: fix link failure on Alpha, fix a Sparse warning and
  annotate/robustify a lockless access in the NOHZ code"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/sched: Annotate lockless access to last_jiffies_update
  lib/vdso: Make __cvdso_clock_getres() static
  time/posix-stubs: Provide compat itimer supoprt for alpha

Pull cpu/SMT fix from Ingo Molnar:
 "Fix a build bug on CONFIG_HOTPLUG_SMT=y && !CONFIG_SYSFS kernels"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/SMT: Fix x86 link error without CONFIG_SYSFS

Pull x86 RAS fix from Ingo Molnar:
 "Fix a thermal throttling race that can result in easy to trigger boot
  crashes on certain Ice Lake platforms"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce/therm_throt: Do not access uninitialized therm_work

Pull perf fixes from Ingo Molnar:
 "Tooling fixes, three Intel uncore driver fixes, plus an AUX events fix
  uncovered by the perf fuzzer"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Remove PCIe3 unit for SNR
  perf/x86/intel/uncore: Fix missing marker for snr_uncore_imc_freerunning_events
  perf/x86/intel/uncore: Add PCI ID of IMC for Xeon E3 V5 Family
  perf: Correctly handle failed perf_get_aux_event()
  perf hists: Fix variable name's inconsistency in hists__for_each() macro
  perf map: Set kmap->kmaps backpointer for main kernel map chunks
  perf report: Fix incorrectly added dimensions as switch perf data file
  tools lib traceevent: Fix memory leakage in filter_event

Pull locking fixes from Ingo Molnar:
 "Three fixes:

    - Fix an rwsem spin-on-owner crash, introduced in v5.4

    - Fix a lockdep bug when running out of stack_trace entries,
      introduced in v5.4

    - Docbook fix"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Fix kernel crash when spinning on RWSEM_OWNER_UNKNOWN
  futex: Fix kernel-doc notation warning
  locking/lockdep: Fix buffer overrun problem in stack_trace[]

Pull irq fix from Ingo Molnar:
 "Fix a recent regression in the Ingenic SoCs irqchip driver that floods
  the syslog"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/ingenic: Get rid of the legacy IRQ domain

Pull EFI fixes from Ingo Molnar:
 "Three EFI fixes:

   - Fix a slow-boot-scrolling regression but making sure we use WC for
     EFI earlycon framebuffer mappings on x86

   - Fix a mixed EFI mode boot crash

   - Disable paging explicitly before entering startup_32() in mixed
     mode bootup"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efistub: Disable paging at mixed mode entry
  efi/libstub/random: Initialize pointer variables to zero for mixed mode
  efi/earlycon: Fix write-combine mapping on x86

Pull rseq fixes from Ingo Molnar:
 "Two rseq bugfixes:

   - CLONE_VM !CLONE_THREAD didn't work properly, the kernel would end
     up corrupting the TLS of the parent. Technically a change in the
     ABI but the previous behavior couldn't resonably have been relied
     on by applications so this looks like a valid exception to the ABI
     rule.

   - Make the RSEQ_FLAG_UNREGISTER ABI behavior consistent with the
     handling of other flags. This is not thought to impact any
     applications either"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rseq: Unregister rseq for clone CLONE_VM
  rseq: Reject unknown flags on rseq unregister

Pull thread fixes from Christian Brauner:
 "Here is an urgent fix for ptrace_may_access() permission checking.

  Commit 69f594a3 ("ptrace: do not audit capability check when
  outputing /proc/pid/stat") introduced the ability to opt out of audit
  messages for accesses to various proc files since they are not
  violations of policy.

  While doing so it switched the check from ns_capable() to
  has_ns_capability{_noaudit}(). That means it switched from checking
  the subjective credentials (ktask->cred) of the task to using the
  objective credentials (ktask->real_cred). This is appears to be wrong.
  ptrace_has_cap() is currently only used in ptrace_may_access() And is
  used to check whether the calling task (subject) has the
  CAP_SYS_PTRACE capability in the provided user namespace to operate on
  the target task (object). According to the cred.h comments this means
  the subjective credentials of the calling task need to be used.

  With this fix we switch ptrace_has_cap() to use security_capable() and
  thus back to using the subjective credentials.

  As one example where this might be particularly problematic, Jann
  pointed out that in combination with the upcoming IORING_OP_OPENAT{2}
  feature, this bug might allow unprivileged users to bypass the
  capability checks while asynchronously opening files like /proc/*/mem,
  because the capability checks for this would be performed against
  kernel credentials.

  To illustrate on the former point about this being exploitable: When
  io_uring creates a new context it records the subjective credentials
  of the caller. Later on, when it starts to do work it creates a kernel
  thread and registers a callback. The callback runs with kernel creds
  for ktask->real_cred and ktask->cred.

  To prevent this from becoming a full-blown 0-day io_uring will call
  override_cred() and override ktask->cred with the subjective
  credentials of the creator of the io_uring instance. With
  ptrace_has_cap() currently looking at ktask->real_cred this override
  will be ineffective and the caller will be able to open arbitray proc
  files as mentioned above.

  Luckily, this is currently not exploitable but would be so once
  IORING_OP_OPENAT{2} land in v5.6. Let's fix it now.

  To minimize potential regressions I successfully ran the criu
  testsuite. criu makes heavy use of ptrace() and extensively hits
  ptrace_may_access() codepaths and has a good change of detecting any
  regressions.

  Additionally, I succesfully ran the ptrace and seccomp kernel tests"

* tag 'for-linus-2020-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  ptrace: reintroduce usage of subjective credentials in ptrace_has_cap()

Pull s390 fixes from Vasily Gorbik:

 - Fix printing misleading Secure-IPL enabled message when it is not.

 - Fix a race condition between host ap bus and guest ap bus doing
   device reset in crypto code.

 - Fix sanity check in CCA cipher key function (CCA AES cipher key
   support), which fails otherwise.

* tag 's390-5.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/setup: Fix secure ipl message
  s390/zcrypt: move ap device reset from bus to driver code
  s390/zcrypt: Fix CCA cipher key gen with clear key value function

Pull SCSI fixes from James Bottomley:
 "Three fixes in drivers with no impact to core code.

  The mptfusion fix is enormous because the driver API had to be
  rethreaded to pass down the necessary iocp pointer, but once that's
  done a significant chunk of code is deleted.

  The other two patches are small"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mptfusion: Fix double fetch bug in ioctl
  scsi: storvsc: Correctly set number of hardware queues for IDE disk
  scsi: fnic: fix invalid stack access

Pull char/misc fixes from Greg KH:
 "Here are some small fixes for 5.5-rc7

  Included here are:

   -  two lkdtm fixes

   -  coresight build fix

   -  Documentation update for the hw process document

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Documentation/process: Add Amazon contact for embargoed hardware issues
  lkdtm/bugs: fix build error in lkdtm_UNSET_SMEP
  lkdtm/bugs: Make double-fault test always available
  coresight: etm4x: Fix unused function warning

Pull staging and IIO driver fixes from Greg KH:
 "Here are some small staging and iio driver fixes for 5.5-rc7

  All of them are for some small reported issues. Nothing major, full
  details in the shortlog.

  All have been in linux-next with no reported issues"

* tag 'staging-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: ni_routes: allow partial routing information
  staging: comedi: ni_routes: fix null dereference in ni_find_route_source()
  iio: light: vcnl4000: Fix scale for vcnl4040
  iio: buffer: align the size of scan bytes to size of the largest element
  iio: chemical: pms7003: fix unmet triggered buffer dependency
  iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID
  iio: adc: ad7124: Fix DT channel configuration

Pull USB driver fixes from Greg KH:
 "Here are some small USB driver and core fixes for 5.5-rc7

  There's one fix for hub wakeup issues and a number of small usb-serial
  driver fixes and device id updates.

  The hub fix has been in linux-next for a while with no reported
  issues, and the usb-serial ones have all passed 0-day with no
  problems"

* tag 'usb-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: quatech2: handle unbound ports
  USB: serial: keyspan: handle unbound ports
  USB: serial: io_edgeport: add missing active-port sanity check
  USB: serial: io_edgeport: handle unbound ports on URB completion
  USB: serial: ch341: handle unbound port at reset_resume
  USB: serial: suppress driver bind attributes
  USB: serial: option: add support for Quectel RM500Q in QDL mode
  usb: core: hub: Improved device recognition on remote wakeup
  USB: serial: opticon: fix control-message timeouts
  USB: serial: option: Add support for Quectel RM500Q
  USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx

Commit 69f594a3 ("ptrace: do not audit capability check when outputing /proc/pid/stat")
introduced the ability to opt out of audit messages for accesses to various
proc files since they are not violations of policy.  While doing so it
somehow switched the check from ns_capable() to
has_ns_capability{_noaudit}(). That means it switched from checking the
subjective credentials of the task to using the objective credentials. This
is wrong since. ptrace_has_cap() is currently only used in
ptrace_may_access() And is used to check whether the calling task (subject)
has the CAP_SYS_PTRACE capability in the provided user namespace to operate
on the target task (object). According to the cred.h comments this would
mean the subjective credentials of the calling task need to be used.
This switches ptrace_has_cap() to use security_capable(). Because we only
call ptrace_has_cap() in ptrace_may_access() and in there we already have a
stable reference to the calling task's creds under rcu_read_lock() there's
no need to go through another series of dereferences and rcu locking done
in ns_capable{_noaudit}().

As one example where this might be particularly problematic, Jann pointed
out that in combination with the upcoming IORING_OP_OPENAT feature, this
bug might allow unprivileged users to bypass the capability checks while
asynchronously opening files like /proc/*/mem, because the capability
checks for this would be performed against kernel credentials.

To illustrate on the former point about this being exploitable: When
io_uring creates a new context it records the subjective credentials of the
caller. Later on, when it starts to do work it creates a kernel thread and
registers a callback. The callback runs with kernel creds for
ktask->real_cred and ktask->cred. To prevent this from becoming a
full-blown 0-day io_uring will call override_cred() and override
ktask->cred with the subjective credentials of the creator of the io_uring
instance. With ptrace_has_cap() currently looking at ktask->real_cred this
override will be ineffective and the caller will be able to open arbitray
proc files as mentioned above.
Luckily, this is currently not exploitable but will turn into a 0-day once
IORING_OP_OPENAT{2} land in v5.6. Fix it now!

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Jann Horn <jannh@google.com>
Fixes: 69f594a3 ("ptrace: do not audit capability check when outputing /proc/pid/stat")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

virtio: maintain obj reservation lock when submitting cmds (Gerd)
rockchip: increase link rate var size to accommodate rates (Tobias)
mst: serialize down messages and clear timeslots are on unplug (Wayne)

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tobias Schramm <t.schramm@manjaro.org>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116162856.GA11524@art_vandelay

Merge tag 'drm-intel-fixes-2020-01-16' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- uAPI fix: Remove dash and colon from PMU names to comply with tools/perf
- Fix for include file that was indirectly included
- Two fixes to make sure VMA are marked active for error capture
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116161419.GA13594@jlahtine-desk.ger.corp.intel.com

As we reset the GPMI block at resume, the timing parameters setup by a
previous exec_op is lost.  Rewriting GPMI timing registers on first exec_op
after resume fixes the problem.

Fixes: ef347c0c ("mtd: rawnand: gpmi: Implement exec_op")
Cc: stable@vger.kernel.org
Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

On system resume, the gpmi clock must be enabled before accessing gpmi
block.  Without this, resume causes something like

[  661.348790] gpmi_reset_block(5cbb0f7e): module reset timeout
[  661.348889] gpmi-nand 1806000.gpmi-nand: Error setting GPMI : -110
[  661.348928] PM: dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -110
[  661.348961] PM: Device 1806000.gpmi-nand failed to resume: error -110

Fixes: ef347c0c ("mtd: rawnand: gpmi: Implement exec_op")
Cc: stable@vger.kernel.org
Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

The commit 7b678c69 ("mtd: spi-nor: Merge spansion Quad Enable
methods") forgot to actually set the QE bit in some cases. Thus this
breaks quad mode accesses to flashes which support readback of the
status register-2. Fix it.

Fixes: 7b678c69 ("mtd: spi-nor: Merge spansion Quad Enable methods")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

mtd->size is still unassigned when running spansion_post_sfdp_fixups()
hook, therefore use nor->params.size to determine the size of flash device.

This makes sure that 4-byte addressing opcodes are used on Spansion
flashes that are larger than 16MiB and don't have SFDP 4BAIT table
populated.

Fixes: 92094ebc ("mtd: spi-nor: Add spansion_post_sfdp_fixups()")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Pull io_uring fixes form Jens Axboe:

 - Ensure ->result is always set when IO is retried (Bijan)

 - In conjunction with the above, fix a regression in polled IO issue
   when retried (me/Bijan)

 - Don't setup async context for read/write fixed, otherwise we may
   wrongly map the iovec on retry (me)

 - Cancel io-wq work if we fail getting mm reference (me)

 - Ensure dependent work is always initialized correctly (me)

 - Only allow original task to submit IO, don't allow it from a passed
   ring fd (me)

* tag 'io_uring-5.5-2020-01-16' of git://git.kernel.dk/linux-block:
  io_uring: only allow submit from owning task
  io_uring: ensure workqueue offload grabs ring mutex for poll list
  io_uring: clear req->result always before issuing a read/write request
  io_uring: be consistent in assigning next work from handler
  io-wq: cancel work if we fail getting a mm reference
  io_uring: don't setup async context for read/write fixed

Pull btrfs fixes from David Sterba:
 "A few more fixes that have been in the works during last twp weeks.
  All have a user visible effect and are stable material:

   - scrub: properly update progress after calling cancel ioctl, calling
     'resume' would start from the beginning otherwise

   - fix subvolume reference removal, after moving out of the original
     path the reference is not recognized and will lead to transaction
     abort

   - fix reloc root lifetime checks, could lead to crashes when there's
     subvolume cleaning running in parallel

   - fix memory leak when quotas get disabled in the middle of extent
     accounting

   - fix transaction abort in case of balance being started on degraded
     mount on eg. RAID1"

* tag 'for-5.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: check rw_devices, not num_devices for balance
  Btrfs: always copy scrub arguments back to user space
  btrfs: relocation: fix reloc_root lifespan and access
  btrfs: fix memory leak in qgroup accounting
  btrfs: do not delete mismatched root refs
  btrfs: fix invalid removal of root ref
  btrfs: rework arguments of btrfs_unlink_subvol

Merge tag 'usb-serial-5.5-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for 5.5-rc7

Here are a few fixes for issues related to unbound port devices which
could lead to NULL-pointer dereferences. Notably the bind attributes for
usb-serial (port) drivers are removed as almost none of the drivers can
handle individual ports going away once they've been bound.

Included are also some new device ids.

All but the unbound-port fixes have been in linux-next with no reported
issues.
Signed-off-by: Johan Hovold <johan@kernel.org>

* tag 'usb-serial-5.5-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: quatech2: handle unbound ports
  USB: serial: keyspan: handle unbound ports
  USB: serial: io_edgeport: add missing active-port sanity check
  USB: serial: io_edgeport: handle unbound ports on URB completion
  USB: serial: ch341: handle unbound port at reset_resume
  USB: serial: suppress driver bind attributes
  USB: serial: option: add support for Quectel RM500Q in QDL mode
  USB: serial: opticon: fix control-message timeouts
  USB: serial: option: Add support for Quectel RM500Q
  USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx

Pull fuse fix from Miklos Szeredi:
 "Fix a regression in the last release affecting the ftp module of the
  gvfs filesystem"

* tag 'fuse-fixes-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix fuse_send_readpages() in the syncronous read case

Pull sound fixes from Takashi Iwai:
 "This became bigger than I have hoped for rc7. But, the only large LOC
  is for stm32 fixes that are simple rewriting of register access
  helpers, while the rest are all nice and small fixes:

   - A few ASoC fixes for the remaining probe error handling bugs

   - ALSA sequencer core fix for racy proc file accesses

   - Revert the option rename of snd-hda-intel to make compatible again

   - Various device-specific fixes"

* tag 'sound-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: seq: Fix racy access for queue timer in proc read
  ALSA: usb-audio: fix sync-ep altsetting sanity check
  ASoC: msm8916-wcd-digital: Reset RX interpolation path after use
  ASoC: msm8916-wcd-analog: Fix MIC BIAS Internal1
  ASoC: cros_ec_codec: Make the device acpi compatible
  ASoC: sti: fix possible sleep-in-atomic
  ASoC: msm8916-wcd-analog: Fix selected events for MIC BIAS External1
  ASoC: hdac_hda: Fix error in driver removal after failed probe
  ASoC: SOF: Intel: fix HDA codec driver probe with multiple controllers
  ASoC: SOF: Intel: lower print level to dbg if we will reinit DSP
  ALSA: dice: fix fallback from protocol extension into limited functionality
  ALSA: firewire-tascam: fix corruption due to spin lock without restoration in SoftIRQ context
  ALSA: hda: Rename back to dmic_detect option
  ASoC: stm32: dfsdm: fix 16 bits record
  ASoC: stm32: sai: fix possible circular locking
  ASoC: Fix NULL dereference at freeing
  ASoC: Intel: bytcht_es8316: Fix Irbis NB41 netbook quirk
  ASoC: rt5640: Fix NULL dereference on module unload

Check for NULL port data in the modem- and line-status handlers to avoid
dereferencing a NULL pointer in the unlikely case where a port device
isn't bound to a driver (e.g. after an allocation failure on port
probe).

Note that the other (stubbed) event handlers qt2_process_xmit_empty()
and qt2_process_flush() would need similar sanity checks in case they
are ever implemented.

Fixes: f7a33e60 ("USB: serial: add quatech2 usb to serial driver")
Cc: stable <stable@vger.kernel.org>     # 3.5
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

Check for NULL port data in the control URB completion handlers to avoid
dereferencing a NULL pointer in the unlikely case where a port device
isn't bound to a driver (e.g. after an allocation failure on port
probe()).

Fixes: 0ca1268e ("USB Serial Keyspan: add support for USA-49WG & USA-28XG")
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

The driver receives the active port number from the device, but never
made sure that the port number was valid. This could lead to a
NULL-pointer dereference or memory corruption in case a device sends
data for an invalid port.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

Check for NULL port data in the shared interrupt and bulk completion
callbacks to avoid dereferencing a NULL pointer in case a device sends
data for a port device which isn't bound to a driver (e.g. due to a
malicious device having unexpected endpoints or after an allocation
failure on port probe).

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

Check for NULL port data in reset_resume() to avoid dereferencing a NULL
pointer in case the port device isn't bound to a driver (e.g. after a
failed control request at port probe).

Fixes: 1ded7ea4 ("USB: ch341 serial: fix port number changed after resume")
Cc: stable <stable@vger.kernel.org>     # 2.6.30
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

The fstest btrfs/154 reports

  [ 8675.381709] BTRFS: Transaction aborted (error -28)
  [ 8675.383302] WARNING: CPU: 1 PID: 31900 at fs/btrfs/block-group.c:2038 btrfs_create_pending_block_groups+0x1e0/0x1f0 [btrfs]
  [ 8675.390925] CPU: 1 PID: 31900 Comm: btrfs Not tainted 5.5.0-rc6-default+ #935
  [ 8675.392780] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
  [ 8675.395452] RIP: 0010:btrfs_create_pending_block_groups+0x1e0/0x1f0 [btrfs]
  [ 8675.402672] RSP: 0018:ffffb2090888fb00 EFLAGS: 00010286
  [ 8675.404413] RAX: 0000000000000000 RBX: ffff92026dfa91c8 RCX: 0000000000000001
  [ 8675.406609] RDX: 0000000000000000 RSI: ffffffff8e100899 RDI: ffffffff8e100971
  [ 8675.408775] RBP: ffff920247c61660 R08: 0000000000000000 R09: 0000000000000000
  [ 8675.410978] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000ffffffe4
  [ 8675.412647] R13: ffff92026db74000 R14: ffff920247c616b8 R15: ffff92026dfbc000
  [ 8675.413994] FS:  00007fd5e57248c0(0000) GS:ffff92027d800000(0000) knlGS:0000000000000000
  [ 8675.416146] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [ 8675.417833] CR2: 0000564aa51682d8 CR3: 000000006dcbc004 CR4: 0000000000160ee0
  [ 8675.419801] Call Trace:
  [ 8675.420742]  btrfs_start_dirty_block_groups+0x355/0x480 [btrfs]
  [ 8675.422600]  btrfs_commit_transaction+0xc8/0xaf0 [btrfs]
  [ 8675.424335]  reset_balance_state+0x14a/0x190 [btrfs]
  [ 8675.425824]  btrfs_balance.cold+0xe7/0x154 [btrfs]
  [ 8675.427313]  ? kmem_cache_alloc_trace+0x235/0x2c0
  [ 8675.428663]  btrfs_ioctl_balance+0x298/0x350 [btrfs]
  [ 8675.430285]  btrfs_ioctl+0x466/0x2550 [btrfs]
  [ 8675.431788]  ? mem_cgroup_charge_statistics+0x51/0xf0
  [ 8675.433487]  ? mem_cgroup_commit_charge+0x56/0x400
  [ 8675.435122]  ? do_raw_spin_unlock+0x4b/0xc0
  [ 8675.436618]  ? _raw_spin_unlock+0x1f/0x30
  [ 8675.438093]  ? __handle_mm_fault+0x499/0x740
  [ 8675.439619]  ? do_vfs_ioctl+0x56e/0x770
  [ 8675.441034]  do_vfs_ioctl+0x56e/0x770
  [ 8675.442411]  ksys_ioctl+0x3a/0x70
  [ 8675.443718]  ? trace_hardirqs_off_thunk+0x1a/0x1c
  [ 8675.445333]  __x64_sys_ioctl+0x16/0x20
  [ 8675.446705]  do_syscall_64+0x50/0x210
  [ 8675.448059]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [ 8675.479187] BTRFS: error (device vdb) in btrfs_create_pending_block_groups:2038: errno=-28 No space left

We now use btrfs_can_overcommit() to see if we can flip a block group
read only.  Before this would fail because we weren't taking into
account the usable un-allocated space for allocating chunks.  With my
patches we were allowed to do the balance, which is technically correct.

The test is trying to start balance on degraded mount.  So now we're
trying to allocate a chunk and cannot because we want to allocate a
RAID1 chunk, but there's only 1 device that's available for usage.  This
results in an ENOSPC.

But we shouldn't even be making it this far, we don't have enough
devices to restripe.  The problem is we're using btrfs_num_devices(),
that also includes missing devices. That's not actually what we want, we
need to use rw_devices.

The chunk_mutex is not needed here, rw_devices changes only in device
add, remove or replace, all are excluded by EXCL_OP mechanism.

Fixes: e4d8ec0f ("Btrfs: implement online profile changing")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add stacktrace, update changelog, drop chunk_mutex ]
Signed-off-by: David Sterba <dsterba@suse.com>

If scrub returns an error we are not copying back the scrub arguments
structure to user space. This prevents user space to know how much
progress scrub has done if an error happened - this includes -ECANCELED
which is returned when users ask for scrub to stop. A particular use
case, which is used in btrfs-progs, is to resume scrub after it is
canceled, in that case it relies on checking the progress from the scrub
arguments structure and then use that progress in a call to resume
scrub.

So fix this by always copying the scrub arguments structure to user
space, overwriting the value returned to user space with -EFAULT only if
copying the structure failed to let user space know that either that
copying did not happen, and therefore the structure is stale, or it
happened partially and the structure is probably not valid and corrupt
due to the partial copy.
Reported-by: Graham Cobb <g.btrfs@cobb.uk.net>
Link: https://lore.kernel.org/linux-btrfs/d0a97688-78be-08de-ca7d-bcb4c7fb397e@cobb.uk.net/
Fixes: 06fe39ab ("Btrfs: do not overwrite scrub error with fault error in scrub ioctl")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Tested-by: Graham Cobb <g.btrfs@cobb.uk.net>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull GPIO fixes from Linus Walleij:
 "This reverts the GPIOLIB_IRQCHIP in the ThunderX driver.

  ThunderX is a piece of Arm-based server chip. I converted the driver
  to hierarchical gpiochip without access to real silicon and failed
  miserably since I didn't take MSI's into account.

  Kevin Hao helpfully stepped in and fixed it properly, let's revert it
  for v5.5 and put the proper conversion into v5.6"

* tag 'gpio-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  Revert "gpio: thunderx: Switch to GPIOLIB_IRQCHIP"

Pull block fixes from Jens Axboe:
 "Three fixes that should go into this release:

   - The 32-bit segment size fix that I mentioned last week (Ming)

   - Use uint for the block size (Mikulas)

   - A null_blk zone write handling fix (Damien)"

* tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block:
  block: fix an integer overflow in logical block size
  null_blk: Fix zone write handling
  block: fix get_max_segment_size() overflow on 32bit arch

The PCIe Root Port driver for CPU Complex PCIe Root Ports are not
loaded on SNR.

The device ID for SNR PCIe3 unit is used by both uncore driver and the
PCIe Root Port driver. If uncore driver is loaded, the PCIe Root Port
driver never be probed.

Remove the PCIe3 unit for SNR for now. The support for PCIe3 unit will
be added later separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200116200210.18937-2-kan.liang@linux.intel.com