This implements the missing MTU setting for the RTL8366RB
switch.

Apart from supporting jumboframes, this rids us of annoying
boot messages like this:
realtek-smi switch: nonfatal error -95 setting MTU on port 0
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

BLOCK_PRIV is never used after it was introduced.
So better to remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

DIGITAL_NFC_DEP_REQ_RES_TAILROOM is never used after it was introduced.
DIGITAL_NFC_DEP_REQ_RES_HEADROOM is no more used after below
commit e8e7f421 ("NFC: digital: Remove useless call to skb_reserve()")
Remove them.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove SRVL_CTRL_PKT_SIZE which is defined more than once.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 0da4c3d3 ("net: phy: add Lynx PCS module") added the files in
./drivers/net/pcs/, but the new LYNX PCS MODULE section refers to
./drivers/net/phy/.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains:

  warning: no file matches    F:    drivers/net/phy/pcs-lynx.c

Repair the LYNX PCS MODULE section by referring to the right location.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Florian Fainelli says:

====================
net: dsa: bcm_sf2: Ensure MDIO diversion is used

Changes in v2:

- export of_update_property() to permit building bcm_sf2 as a module
- provided a better explanation of the problem being solved after
  explaining it to Andrew during the v1 review
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Registering our slave MDIO bus outside of the OF infrastructure is
necessary in order to avoid creating double references of the same
Device Tree nodes, however it is not sufficient to guarantee that the
MDIO bus diversion is used because of_phy_connect() will still resolve
to a valid PHY phandle and it will connect to the PHY using its parent
MDIO bus which is still the SF2 master MDIO bus. The reason for that is
because BCM7445 systems were already shipped with a Device Tree blob
looking like this (irrelevant parts omitted for simplicity):

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@1 {
			phy-mode = "rgmii-txid";
			phy-handle = <&phy0>;
                        reg = <1>;
			label = "rgmii_1";
		};
	...

	mdio@403c0 {
		...

		phy0: ethernet-phy@0 {
			broken-turn-around;
			device_type = "ethernet-phy";
			max-speed = <0x3e8>;
			reg = <0>;
			compatible = "brcm,bcm53125", "ethernet-phy-ieee802.3-c22";
		};
	};

There is a hardware issue with chip revisions (Dx) that lead to the
development of the following commits:

461cd1b0 ("net: dsa: bcm_sf2: Register our slave MDIO bus")
536fab5b ("net: dsa: bcm_sf2: Do not register slave MDIO bus with OF")
b8c6cd1d ("net: dsa: bcm_sf2: do not use indirect reads and writes for 7445E0")

There should have been an internal MDIO bus node created for the chip
revision (Dx) that suffers from this problem, but it did not happen back
then.

Had that happen, that we should have correctly parented phy@0 (bcm53125
below) as child node of the internal MDIO bus, but the production Device
Tree blob that was shipped with the firmware targeted the fixed version
of the chip, despite both the affected and corrected chips being shipped
into production.

The problem is that of_phy_connect() for port@1 will happily resolve the
'phy-handle' from the mdio@403c0 node, which bypasses the diversion
completely. This results in this double programming that the diversion
refers to and aims to avoid. In order to force of_phy_connect() to fail,
and have DSA call to dsa_slave_phy_connect(), we must deactivate
ethernet-phy@0 from mdio@403c0, and the best way to do that is by
removing the phandle property completely.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We will need to remove some OF properties in drivers/net/dsa/bcm_sf2.c
with a subsequent commit. Export of_remove_property() to modules so we
can keep bcm_sf2 modular and provide an empty stub for when CONFIG_OF is
disabled to maintain the ability to compile test.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Edward Cree says:

====================
sfc: TXQ refactor

Refactor and unify partner-TXQ handling in the EF100 and legacy drivers.

The main thrust of this series is to remove from the legacy (Siena/EF10)
 driver the assumption that a netdev TX queue has precisely two hardware
 TXQs (checksummed and unchecksummed) associated with it, so that in
 future we can have more (e.g. for handling inner-header checksums) or
 fewer (e.g. to free up hardware queues for XDP usage).

Changes from v1:
 * better explain patch #1 in the commit message, and rename
   xmit_more_available to xmit_pending
 * add new patch #2 applying the same approach to ef100, for consistency
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

All users of this function are now gone.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use efx_for_each_channel_tx_queue() rather than efx_tx_queue_partner().
Make some related simplifications of efx_nic_tx_is_empty() to remove
 entry points that aren't used.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of open-coding the calculation with efx_tx_queue_partner(), use
 the functions that iterate over numbers of queues other than 2 with
 efx_for_each_channel_tx_queue().
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As in the Siena/EF10 case, it minimises cacheline ping-pong between
 the TX and completion paths.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This should cause no functional change; merely make there only be one
 design of xmit_more handling to understand.  As with the EF10/Siena
 version, we set tx_queue->xmit_pending when we queue up a TX, and
 clear it when we ring the doorbell (in ef100_notify_tx_desc).
While we're at it, make ef100_notify_tx_desc static since nothing
 outside of ef100_tx.c uses it.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of using efx_tx_queue_partner(), which relies on the assumption
 that tx_queues_per_channel is 2, efx_tx_send_pending() iterates over
 txqs with efx_for_each_channel_tx_queue().
We unconditionally set tx_queue->xmit_pending (renamed from
 xmit_more_available), then condition on xmit_more for the call to
 efx_tx_send_pending(), which will clear xmit_pending.  Thus, after an
 xmit_more TX, the doorbell is un-rung and xmit_pending is true.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.

Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe64 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull s390 fixes from Vasily Gorbik:

 - Fix GENERIC_LOCKBREAK dependency on PREEMPTION in Kconfig broken
   because of a typo

 - Update defconfigs

* tag 's390-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: update defconfigs
  s390: fix GENERIC_LOCKBREAK dependency typo in Kconfig

Pull arm64 fixes from Catalin Marinas:

 - Fix the loading of modules built with binutils-2.35. This version
   produces writable and executable .text.ftrace_trampoline section
   which is rejected by the kernel.

 - Remove the exporting of cpu_logical_map() as the Tegra driver has now
   been fixed and no longer uses this function.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/module: set trampoline section flags regardless of CONFIG_DYNAMIC_FTRACE
  arm64: Remove exporting cpu_logical_map symbol

Pull MIPS fixes from Thomas Bogendoerfer:
 "A few MIPS fixes:

   - fallthrough fallout fix

   - BMIPS fixes

   - MSA fix to avoid leaking MSA register contents

   - Loongson perf and cpu feature fix

   - SNI interrupt fix"

* tag 'mips_fixes_5.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: SNI: Fix SCSI interrupt
  MIPS: add missing MSACSR and upper MSA initialization
  MIPS: perf: Fix wrong check condition of Loongson event IDs
  mips/oprofile: Fix fallthrough placement
  MIPS: Loongson64: Remove unnecessary inclusion of boot_param.h
  MIPS: BMIPS: Also call bmips_cpu_setup() for secondary cores
  MIPS: mm: BMIPS5000 has inclusive physical caches
  MIPS: Loongson64: Do not override watch and ejtag feature

Merge tag 'kbuild-fixes-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - fix documents

 - fix warning in 'make localmodconfig'

* tag 'kbuild-fixes-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: remove redundant assignment prompt = prompt
  kbuild: Documentation: clean up makefiles.rst
  kconfig: streamline_config.pl: check defined(ENV variable) before using it
  Documentation/llvm: Improve formatting of commands, variables, and arguments

Pull power management fixes from Rafael Wysocki:
 "These fix reference counting in the operating performance points (OPP)
  framework and address a few intel_pstate driver issues, mostly related
  to switching driver operation modes and similar with hardware-managed
  P-states (HWP) enabled.

  Specifics:

   - Fix reference counting of operating performance points (OPP) tables
     (Viresh Kumar).

   - Address intel_pstate driver interface issues, mostly related to
     switching operation modes and handling CPU offline and online and
     system-wide suspend/resume with hardware-managed P-states (HWP)
     enabled (Rafael Wysocki).

   - Fix the maximum frequency computation in the intel_pstate driver
     with turbo P-states disabled by the platform firmware and HWP
     enabled (Francisco Jerez)"

* tag 'pm-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled
  cpufreq: intel_pstate: Free memory only when turning off
  cpufreq: intel_pstate: Add ->offline and ->online callbacks
  cpufreq: intel_pstate: Tweak the EPP sysfs interface
  cpufreq: intel_pstate: Update cached EPP in the active mode
  cpufreq: intel_pstate: Refuse to turn off with HWP enabled
  opp: Don't drop reference for an OPP table that was never parsed

Pull libata fixes from Jens Axboe:

 - improve Sandisks ATA_HORKAGE on NCQ (Tejun)

 - link printk cleanup (Xu)

* tag 'libata-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
  libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks
  ata: ahci: use ata_link_info() instead of ata_link_printk()

Pull block fixes from Jens Axboe:
 "A bit larger than usual this week, mostly due to the NVMe fixes
  arriving late for -rc3 and hence didn't make last weeks pull request.

   - NVMe:
        - instance leak and io boundary fixes from Keith
        - fc locking fix from Christophe
        - various tcp/rdma reset during traffic fixes from Sagi
        - pci use-after-free fix from Tong
        - tcp target null deref fix from Ziye

   - Locking fix for partition removal (Christoph)

   - Ensure bdi->io_pages is always set (me)

   - Fixup for hd struct reference (Ming)

   - Fix for zero length bvecs (Ming)

   - Two small blk-iocost fixes (Tejun)"

* tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
  block: allow for_each_bvec to support zero len bvec
  blk-stat: make q->stats->lock irqsafe
  blk-iocost: ioc_pd_free() shouldn't assume irq disabled
  block: fix locking in bdev_del_partition
  block: release disk reference in hd_struct_free_work
  block: ensure bdi->io_pages is always initialized
  nvme-pci: cancel nvme device request before disabling
  nvme: only use power of two io boundaries
  nvme: fix controller instance leak
  nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()'
  nvme: Fix NULL dereference for pci nvme controllers
  nvme-rdma: fix reset hang if controller died in the middle of a reset
  nvme-rdma: fix timeout handler
  nvme-rdma: serialize controller teardown sequences
  nvme-tcp: fix reset hang if controller died in the middle of a reset
  nvme-tcp: fix timeout handler
  nvme-tcp: serialize controller teardown sequences
  nvme: have nvme_wait_freeze_timeout return if it timed out
  nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance
  nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu

Pull io_uring fixes from Jens Axboe:

 - EAGAIN with O_NONBLOCK retry fix

 - Two small fixes for registered files (Jiufei)

* tag 'io_uring-5.9-2020-09-04' of git://git.kernel.dk/linux-block:
  io_uring: no read/write-retry on -EAGAIN error and O_NONBLOCK marked file
  io_uring: set table->files[i] to NULL when io_sqe_file_register failed
  io_uring: fix removing the wrong file in __io_sqe_files_update()

Pull thermal fixes from Daniel Lezcano:

 - Fix bogus thermal shutdowns for omap4430 where bogus values resulting
   from an incorrect ADC conversion are too high and fire an emergency
   shutdown (Tony Lindgren)

 - Don't suppress negative temp for qcom spmi as they are valid and
   userspace needs them (Veera Vegivada)

 - Fix use-after-free in thermal_zone_device_unregister reported by
   Kasan (Dmitry Osipenko)

* tag 'thermal-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal: core: Fix use-after-free in thermal_zone_device_unregister()
  thermal: qcom-spmi-temp-alarm: Don't suppress negative temp
  thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430

Pull dmaengine fixes from Vinod Koul:
 "A couple of core fixes and odd driver fixes for dmaengine subsystem:

  Core:
   - drop ACPI CSRT table reference after using it
   - fix of_dma_router_xlate() error handling

  Drivers fixes in idxd, at_hdmac, pl330, dw-edma and jz478"

* tag 'dmaengine-fix-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: ti: k3-udma: Update rchan_oes_offset for am654 SYSFW ABI 3.0
  drivers/dma/dma-jz4780: Fix race condition between probe and irq handler
  dmaengine: dw-edma: Fix scatter-gather address calculation
  dmaengine: ti: k3-udma: Fix the TR initialization for prep_slave_sg
  dmaengine: pl330: Fix burst length if burst size is smaller than bus width
  dmaengine: at_hdmac: add missing kfree() call in at_dma_xlate()
  dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate()
  dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate()
  dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling
  dmaengine: idxd: reset states after device disable or reset
  dmaengine: acpi: Put the CSRT table after using it

Pull sound fixes from Takashi Iwai:
 "A collection of small changes, nothing intrusive:

   - remaining tasklet API conversions, now all sound stuff have been
     converted

   - a few HD-audio and USB-audio quirks and minor fixes

   - FireWire Tascam and Digi00xx fixes

   - drop a kernel WARNING from PCM OSS for syzkaller"

* tag 'sound-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
  ALSA: hda/realtek - Improved routing for Thinkpad X1 7th/8th Gen
  ALSA: hda: use consistent HDAudio spelling in comments/docs
  ALSA: hda: add dev_dbg log when driver is not selected
  ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled
  ALSA: hda: hdmi - add Rocketlake support
  ALSA: ua101: convert tasklets to use new tasklet_setup() API
  ALSA: usb-audio: convert tasklets to use new tasklet_setup() API
  ASoC: txx9: convert tasklets to use new tasklet_setup() API
  ASoC: siu: convert tasklets to use new tasklet_setup() API
  ASoC: fsl_esai: convert tasklets to use new tasklet_setup() API
  ALSA: hdsp: convert tasklets to use new tasklet_setup() API
  ALSA: riptide: convert tasklets to use new tasklet_setup() API
  ALSA: pci/asihpi: convert tasklets to use new tasklet_setup() API
  ALSA: firewire: convert tasklets to use new tasklet_setup() API
  ALSA: core: convert tasklets to use new tasklet_setup() API
  ALSA: pcm: oss: Remove superfluous WARN_ON() for mulaw sanity check
  ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO
  ALSA: hda/hdmi: always check pin power status in i915 pin fixup
  ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion NT950XCJ-X716A
  ALSA: usb-audio: Add basic capture support for Pioneer DJ DJM-250MK2
  ...

Pull drm fixes from Dave Airlie:
 "Not much going on this week, nouveau has a display hw bug workaround,
  amdgpu has some PM fixes and CIK regression fixes, one single radeon
  PLL fix, and a couple of i915 display fixes.

  amdgpu:
   - Fix for 32bit systems
   - SW CTF fix
   - Update for Sienna Cichlid
   - CIK bug fixes

  radeon:
   - PLL fix

  i915:
   - Clang build warning fix
   - HDCP fixes

  nouveau:
   - display fixes"

* tag 'drm-fixes-2020-09-04' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/kms/nv50-gp1xx: add WAR for EVO push buffer HW bug
  drm/nouveau/kms/nv50-gp1xx: disable notifies again after core update
  drm/nouveau/kms/nv50-: add some whitespace before debug message
  drm/nouveau/kms/gv100-: Include correct push header in crcc37d.c
  drm/radeon: Prefer lower feedback dividers
  drm/amdgpu: Fix bug in reporting voltage for CIK
  drm/amdgpu: Specify get_argument function for ci_smu_funcs
  drm/amd/pm: enable MP0 DPM for sienna_cichlid
  drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp setting
  drm/amd/pm: fix is_dpm_running() run error on 32bit system
  drm/i915: Clear the repeater bit on HDCP disable
  drm/i915: Fix sha_text population code
  drm/i915/display: Ensure that ret is always initialized in icl_combo_phy_verify_state

Using tp_reserve to calculate netoff can overflow as
tp_reserve is unsigned int and netoff is unsigned short.

This may lead to macoff receving a smaller value then
sizeof(struct virtio_net_hdr), and if po->has_vnet_hdr
is set, an out-of-bounds write will occur when
calling virtio_net_hdr_from_skb.

The bug is fixed by converting netoff to unsigned int
and checking if it exceeds USHRT_MAX.

This addresses CVE-2020-14386

Fixes: 8913336a ("packet: add PACKET_RESERVE sockopt")
Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge emailed patches from Peter Xu:
 "This is a small series that I picked up from Linus's suggestion to
  simplify cow handling (and also make it more strict) by checking
  against page refcounts rather than mapcounts.

  This makes uffd-wp work again (verified by running upmapsort)"

Note: this is horrendously bad timing, and making this kind of
fundamental vm change after -rc3 is not at all how things should work.
The saving grace is that it really is a a nice simplification:

 8 files changed, 29 insertions(+), 120 deletions(-)

The reason for the bad timing is that it turns out that commit
17839856 ("gup: document and work around 'COW can break either way'
issue" broke not just UFFD functionality (as Peter noticed), but Mikulas
Patocka also reports that it caused issues for strace when running in a
DAX environment with ext4 on a persistent memory setup.

And we can't just revert that commit without re-introducing the original
issue that is a potential security hole, so making COW stricter (and in
the process much simpler) is a step to then undoing the forced COW that
broke other uses.

Link: https://lore.kernel.org/lkml/alpine.LRH.2.02.2009031328040.6929@file01.intranet.prod.int.rdu2.redhat.com/

* emailed patches from Peter Xu <peterx@redhat.com>:
  mm: Add PGREUSE counter
  mm/gup: Remove enfornced COW mechanism
  mm/ksm: Remove reuse_ksm_page()
  mm: do_wp_page() simplification

* pm-cpufreq:
  cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled
  cpufreq: intel_pstate: Free memory only when turning off
  cpufreq: intel_pstate: Add ->offline and ->online callbacks
  cpufreq: intel_pstate: Tweak the EPP sysfs interface
  cpufreq: intel_pstate: Update cached EPP in the active mode
  cpufreq: intel_pstate: Refuse to turn off with HWP enabled

This accounts for wp_page_reuse() case, where we reused a page for COW.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With the more strict (but greatly simplified) page reuse logic in
do_wp_page(), we can safely go back to the world where cow is not
enforced with writes.

This essentially reverts commit 17839856 ("gup: document and work
around 'COW can break either way' issue").  There are some context
differences due to some changes later on around it:

  2170ecfa ("drm/i915: convert get_user_pages() --> pin_user_pages()", 2020-06-03)
  376a34ef ("mm/gup: refactor and de-duplicate gup_fast() code", 2020-06-03)

Some lines moved back and forth with those, but this revert patch should
have striped out and covered all the enforced cow bits anyways.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove the function as the last reference has gone away with the do_wp_page()
changes.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

How about we just make sure we're the only possible valid user fo the
page before we bother to reuse it?

Simplify, simplify, simplify.

And get rid of the nasty serialization on the page lock at the same time.

[peterx: add subject prefix]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

GCOV built with GCC 10 doesn't initialize n_function variable.  This
produces different kernel panics as was seen by Colin in Ubuntu and me
in FC 32.

As a workaround, let's disable GCOV build for broken GCC 10 version.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891288
Link: https://lore.kernel.org/lkml/20200827133932.3338519-1-leon@kernel.org
Link: https://lore.kernel.org/lkml/CAHk-=whbijeSdSvx-Xcr0DPMj0BiwhJ+uiNnDSVZcr_h_kg7UA@mail.gmail.com/
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init_stat() returns 0 on success, same as vfs_lstat().  When it replaced
vfs_lstat(), the '!' was dropped.

Fixes: 716308a5 ("init: add an init_stat helper")
Signed-off-by: Barret Rhoden <brho@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The user-after-free bug in thermal_zone_device_unregister() is reported by
KASAN. It happens because struct thermal_zone_device is released during of
device_unregister() invocation, and hence the "tz" variable shouldn't be
touched by thermal_notify_tz_delete(tz->id).

Fixes: 55cdf0a2 ("thermal: core: Add notifications call in the framework")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200817235854.26816-1-digetx@gmail.com

Currently driver is suppressing the negative temperature
readings from the vadc. Consumers of the thermal zones need
to read the negative temperature too. Don't suppress the
readings.

Fixes: c610afaa ("thermal: Add QPNP PMIC temperature alarm driver")
Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/944856eb819081268fab783236a916257de120e4.1596040416.git.gurus@codeaurora.org

We can sometimes get bogus thermal shutdowns on omap4430 at least with
droid4 running idle with a battery charger connected:

thermal thermal_zone0: critical temperature reached (143 C), shutting down

Dumping out the register values shows we can occasionally get a 0x7f value
that is outside the TRM listed values in the ADC conversion table. And then
we get a normal value when reading again after that. Reading the register
multiple times does not seem help avoiding the bogus values as they stay
until the next sample is ready.

Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we
should have values from 13 to 107 listed with a total of 95 values. But
looking at the omap4430_adc_to_temp array, the values are off, and the
end values are missing. And it seems that the 4430 ADC table is similar
to omap3630 rather than omap4460.

Let's fix the issue by using values based on the omap3630 table and just
ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has
the missing values added while the TRM table only shows every second
value.

Note that sometimes the ADC register values within the valid table can
also be way off for about 1 out of 10 values. But it seems that those
just show about 25 C too low values rather than too high values. So those
do not cause a bogus thermal shutdown.

Fixes: 1a31270e ("staging: omap-thermal: add OMAP4 data structures")
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com