- 21 Aug, 2008 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: pnp: fix "add acpi:* modalias entries" UIO: generic irq handling for some uio platform devices UIO: uio_pdrv: fix license specification UIO: uio_pdrv: fix memory leak block: drop references taken by class_find_device() block: fix partial read() of /proc/{partitions,diskstats} PM: Remove WARN_ON from device_pm_add driver core: add init_name to struct device PM: don't skip device PM init when CONFIG_PM_SLEEP isn't set and CONFIG_PM is set driver model: anti-oopsing medicine dev_printk(): constify the `dev' argument drivers/base/driver.c: remove unused to_dev() macro Documentation: HOWTO-ja_JP-sync patch Japanese translation of Documentation/SubmitChecklist kobject: Replace ALL occurrences of '/' with '!' instead of only the first one.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: sisusbvga: add USB ID for 0711:0918 Magic Control Technology Corp. USB: automatically enable RHSC interrupts USB: Don't rebind before "complete" callback USB: Add new PM callback methods for USB USB: Defer Set-Interface for suspended devices USB: Add udev argument to interface suspend/resume functions USB: cdc-acm: don't unlock acm->mutex on error path MUSB: Fix index register corruption seen with g_ether and Windows host usb: musb: get rid of MUSB_LOGLEVEL and use parameter usb: musb: get rid of procfs entry USB: Fix pxa27x_udc usb speed handling. USB: cdc-acm: quirk for Conexant CX93010 USB modem USB: fix bug in usb_unlink_anchored_urbs() usb-serial: option support HSDPA modem A2502 USB: ISP1760: fixed trivial math in comment
-
Martin Schwidefsky authored
Signed-off-by:Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Gerald Schaefer authored
Concurrently adding the same segment may lead to duplicate device_register() calls, which will trigger an error in kobject code: "... don't try to register things with the same name in the same directory". This patch adds a check to avoid this. Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
-
Peter Oberparleiter authored
Calling a ccw driver's notify function without the ccw device lock held opens up a race window between discovery and handling of a change in the device operational state. As a result, the device driver may encounter unexpected device malfunction, leading to out-of-retry situations or similar. Remove race by extending the ccw device lock from state change discovery to the calling of the notify function. Signed-off-by:
Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by:
-
Stefan Weinhuber authored
The Perform Subsystem Function/Prepare for Read Subsystem Data command requires 12 bytes of parameter data, but the respective data structure dasd_psf_prssd_data has a length of 16 bytes. Current storage servers ignore the obsolete bytes, but older models fail to execute the command and report an incorrect length error. This causes the device initilization for these devices to fail. To fix this problem we need to correct the dasd_psf_prssd_data structure and shorten it to the correct length. Reported-by:
Ivan Warren <ivan@vmfacility.fr> Reviewed-by:
Stefan Weinhuber <wein@de.ibm.com>
-
Eric Sandeen authored
ext4 does not work on s390 because ext2_find_next_bit is broken. Fortunately this function is only used by ext4. The function uses ffs which does not work analog to ffz. The result of ffs has an offset of 1 which is not taken into account. To fix this use the low level __ffs_word function directly instead of the ill defined ffs. In addition the patch improves find_next_zero_bit and ext2_find_next_zero_bit by passing the bit offset into __ffz_word instead of adding it after the function call returned. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Peter Oberparleiter authored
Fix ccw group device initialization: initialize device object before using reference counting during cleanup. Fixes the following message when group device initialization fails (e.g. because too few devices where specified): kobject: '<NULL>' (..): is not initialized, yet kobject_put() is being called. Signed-off-by: -
Jan Glauber authored
Increasing the qdio reference count for every used subchannel is unnecessary since unloading qdio (if build as a module) is only possible if other modules that use qdio are unloaded. Unloading modules that use qdio in turn requires that these modules shut down all qdio subchannels. Therefore the additional module_get reference is not needed. Signed-off-by:
Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by:
-
Jan Glauber authored
Improve s390 debug feature usage: - log busy bit in dbf - increase size of dbf views - consistent logging of qdio api calls to setup view - print subchannel number so one can associate the interface with the dbf data - only log events to one view Signed-off-by:
-
Jan Glauber authored
If qdio_establish fails we call qdio_shutdown to cleanup the qdio subchannel. The tiq_list entry may not be valid at that time, therefore we must ignore queues with an invalid list entry in tiqdio_remove_input_queues. Signed-off-by:
-
Heiko Carstens authored
Remove the now unneeded s390_idle.lock spinlock initialization after Josef Sipek did it the right way in arch/s390/kernel/process.c. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Josef 'Jeff' Sipek authored
Ever since commit 43ca5c3a ([S390] Convert monitor calls to function calls.), the kernel refused to IPL with spinlock debugging enabled. BUG: spinlock bad magic on CPU#0, swapper/0 lock: 00000000003a4668, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 0 Not tainted 2.6.25 #1 Process swapper (pid: 0, task: 000000000034f958, ksp: 0000000000377d60) 0000000000377ab8 0000000000352628 0000000000377d60 0000000000377d60 0000000000016af4 00000000fffff7b5 0000000000377d60 0000000000000000 0000000000000000 0000000000377a18 0000000000000009 0000000000377a18 0000000000377a78 000000000023c920 0000000000016af4 0000000000377a18 0000000000000005 0000000000000000 0000000000377b58 0000000000377ab8 Call Trace: ([<0000000000016a60>] show_trace+0xdc/0x108) [<0000000000016b4e>] show_stack+0xc2/0xfc [<0000000000016c9a>] dump_stack+0xb2/0xc0 [<0000000000172dd4>] Signed-off-by:
Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by:
-
Julien Brunel authored
In case of error, functions dasd_kmalloc_request and idal_buffer_alloc return an ERR pointer, but never return the NULL pointer. So after a call to one of these functions, a NULL test should be replaced by an IS_ERR test. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @correct_null_test@ expression x,E; statement S1, S2; @@ x = ( dasd_kmalloc_request(...) | idal_buffer_alloc(...) ) <... when != x = E if ( ( - x@p2 != NULL + ! IS_ERR ( x ) | - x@p2 == NULL + IS_ERR( x ) ) ) S1 else S2 ...> ? x = E; // </smpl> Signed-off-by:
Julien Brunel <brunel@diku.dk> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Stefan Lippers-Hollmann authored
sisusbvga: add USB ID for 0711:0918 Magic Control Technology Corp. usb 1-2: new high speed USB device using ehci_hcd and address 4 usb 1-2: configuration #1 chosen from 1 choice usb 1-2: USB2VGA dongle found at address 4 usb 1-2: Allocated 8 output buffers usb 1-2: 8MB 1 ch/1 r SDR SDRAM, bus width 32 usb 1-2: New USB device found, idVendor=0711, idProduct=0918 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Signed-off-by:
Stefan Lippers-Hollmann <s.L-H@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1069c) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Alan Stern authored
This patch (as1130) fixes an incompatibility between the new PM infrastructure and USB power management. We are not allowed to call drivers' probe routines during a system sleep transition between the "prepare" and "complete" callbacks, but that's exactly what we do when a driver doesn't have full suspend/resume support. Such drivers are unbound during the "suspend" call and reprobed during the "resume" call. The patch causes the reprobe step to be skipped if the "complete" callback hasn't been issued yet, i.e., if the interface's dev.power.status field is not equal to DPM_ON. Thus during the "resume" callback nothing bad will happen, and during the final "complete" callback the reprobing will occur as desired. This fixes the problem reported in Bugzilla #11263. Signed-off-by:
-
Alan Stern authored
This patch (as1129) adds support for the new PM callbacks to usbcore. The new callbacks merely invoke the same old USB power management routines as the old ones did. A minor improvement is that the callbacks are present only in the "USB-device" device_type structure, rather than in the bus_type structure. This way they will be invoked only for USB devices, not for USB interfaces. The core USB PM routines automatically handle suspending and resuming interfaces along with their devices. Signed-off-by:
-
Alan Stern authored
This patch (as1128) fixes one of the problems related to the new PM infrastructure. We are not allowed to register new child devices during the middle of a system sleep transition, but unbinding a USB driver causes the core to automatically install altsetting 0 and thereby create new endpoint pseudo-devices. The patch fixes this problem (and the related problem that installing altsetting 0 will fail if the device is suspended) by deferring the Set-Interface call until some later time when it is legal and can succeed. Possible later times are: when a new driver is being probed for the interface, and when the interface is being resumed. Signed-off-by:
-
Alan Stern authored
This patch (as1127) makes a minor change to the prototypes of the usb_suspend_interface() and usb_resume_interface() routines. Now the usb_device structure is passed as an argument, instead of being computed on-the-fly from the usb_interface argument. It makes the code look simpler, even if it really isn't much different from before. Signed-off-by:
-
Alexey Dobriyan authored
On Wed, Jul 23, 2008 at 03:52:36PM +0300, Andrei Popa wrote: > I installed gnokii-0.6.22-r2 and gave the command "gnokii --identify" > and the kernel oopsed: > > BUG: unable to handle kernel NULL pointer dereference at 00000458 > IP: [<c0444b52>] mutex_unlock+0x0/0xb > [<c03830ae>] acm_tty_open+0x4c/0x214 Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Tested-by:
Andrei Popa <andrei.popa@i-neo.ro> Cc: stable <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Anand Gadiyar authored
If Indexed Mode register accesses are enabled, the ep0_rxstate() function calls musb_g_ep0_giveback() before writing to the CSR register. When control returns to this ep0_rxstate, the index register contents are over-written. This causes the CSR register write to fail. Fixed by writing the correct value into the index register before writing to the CSR. This was observed only in ep0_rxstate() with g_ether loaded and the device connected to a MS Windows host PC. Anticipatively fixed ep0_txstate() as well. Signed-off-by:
Anand Gadiyar <gadiyar@ti.com> Acked-by:
Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
-
Felipe Balbi authored
We can change debugging level on the fly via /sys/module/musb_hdrc/parameters/debug. We can also get rid of the LOGLEVEL facility in Kconfig and rely only in module parameter. Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Felipe Balbi authored
Drivers should not add procfs. The functionality in the old procfs file will be moved to debugfs. Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Robert Jarzmik authored
The new composite framework revealed a weakness in the pxa27x_udc driver gadget register function. Instead of checking if speed asked for was USB_LOW_SPEED upon usb_gadget_register() to deny service, it checked only for USB_FULL_SPEED, thus denying service to usb high speed capable gadgets (like g_ether). Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Eric Sandeen authored
This patch gets my Rosewill RNX-56USB USB modem (with Conexant CX93010 chipset) up and running to the point where I can send AT commands and retrieve caller ID data, which is all I want to do with it. Signed-off-by:
Eric Sandeen <sandeen@sandeen.net> Acked-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Oliver Neukum authored
Irqs must not accidentally be reenabled. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Hiroshi Miura authored
This patch support NTT DoCoMo A2502 3G/HSDPA modem on option driver. It is produced by AnyDATA Corp. and also sold as KT Freetelecom (Korea) ADU 620UW. It support 3.6Mbps/7.2Mbps hight speed communication. I have tested A2502 with NTT DoCoMo MoperaU ISP service. Signed-off-by:
Hiroshi Miura <miurahr@nttdata.co.jp> Signed-off-by:
Matthias Urlichs <matthias@urlichs.de> Signed-off-by:
-
Enrico Scholz authored
Signed-off-by:
Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Acked-by:
Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by:
-
Kay Sievers authored
With 22454cb9 we added only the first entry of the device table. We need to loop over the whole device list. Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
Magnus Damm authored
This is V3 of uio_pdrv_genirq.c, a platform driver for UIO with generic IRQ handling code. This driver is very similar to the regular UIO platform driver, but is only suitable for devices that are connected to the interrupt controller using unique interrupt lines. The uio_pdrv_genirq driver includes generic interrupt handling code which disables the serviced interrupt in the interrupt controller and makes the user space driver responsible for acknowledging the interrupt in the device and reenabling the interrupt in the interrupt controller. Shared interrupts are not supported since the in-kernel interrupt handler will disable the interrupt line in the interrupt controller, and in a shared interrupt configuration this will stop other devices from delivering interrupts. Signed-off-by:
Magnus Damm <damm@igel.co.jp> Signed-off-by:
Hans J. Koch <hjk@linutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
Thanks to Magnus Damm for pointing that out. Signed-off-by:
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by:
-
Uwe Kleine-König authored
Thanks to Magnus Damm for pointing that out. Signed-off-by:
-
Kay Sievers authored
Otherwise we leak references, which is not a good thing to do. Signed-off-by:
-
Kay Sievers authored
The proc files get truncated if they do not fit into the buffer with a single read(). We need to move the seq_file index from the callback of class_find_device() to the caller of class_find_device(), to keep its value across multiple invocations of the callback. Signed-off-by:
-
Rafael J. Wysocki authored
PM: Remove WARN_ON from device_pm_add Fix message in device_pm_add() saying that the device will not be added to dpm_list, although in fact the device is going to be added to the list regardless of the ordering violation. Remove the WARN_ON(true) triggered in that situation, because it is hit by USB very often and spams the users' logs. This patch fixes bug #11263 Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Greg Kroah-Hartman authored
This gives us a way to handle both the bus_id and init_name values being used for a while during the transition period. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: -
Alan Stern authored
This patch (as1124) fixes a couple of bugs in the PM core. The new dev->power.status field should be initialized regardless of whether CONFIG_PM_SLEEP is enabled, and similarly dpm_sysfs_add() should be called whenever CONFIG_PM is enabled. The patch separates out the call to dpm_sysfs_add() from the call to device_pm_add(). As a result device_pm_add() can no longer return an error, so its return type is changed to void. Signed-off-by:
Romit Dasgupta <romit@ti.com> Acked-by:
-
David Brownell authored
Anti-oops medicine for the class iterators ... the oops was observed when a class was implicitly referenced before it was initialized. [Modified by Greg to spit a warning back so someone knows to fix their code] Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Jean Delvare authored
Add const markings to dev_name and dev_driver_string to make it clear that dev_printk doesn't modify dev. This is a prerequisite to adding more const markings to other functions make it clearer, which functions can modify dev and which can't. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
