Drop LIST_HEAD where the variable it declares has never
been used.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
  ... when != x
// </smpl>

Fixes: c82e9aa0 ("mlx4_core: resource tracking for HCA resources used by guests")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drop LIST_HEAD where the variable it declares is never used.

The uses were removed in 244cd96a ("net_sched: remove
list_head from tc_action"), but not the declaration.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
  ... when != x
// </smpl>

Fixes: 244cd96a ("net_sched: remove list_head from tc_action")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drop LIST_HEAD where the variable it declares is never used.

These became useless in 244cd96a ("net_sched: remove list_head
from tc_action")

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
  ... when != x
// </smpl>

Fixes: 244cd96a ("net_sched: remove list_head from tc_action")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:1339:57-58: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Fixes: 4c8fb298 ("net/mlx5e: Increase VF representors' SQ size to 128")
CC: Gavi Teitz <gavi@mellanox.com>
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb->sp doesn't exist anymore in the next-next tree, so mips defconfig
no longer builds.  Use helper instead to reset the secpath.

Not even compile tested.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 4165079b ("net: switch secpath to use skb extension infrastructure")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull sparc fixes from David Miller:
 "Just some small fixes here and there, and a refcount leak in a serial
  driver, nothing serious"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  serial/sunsu: fix refcount leak
  sparc: Set "ARCH: sunxx" information on the same line
  sparc: vdso: Drop implicit common-page-size linker flag

Pull more networking fixes from David Miller:
 "Some more bug fixes have trickled in, we have:

  1) Local MAC entries properly in mscc driver, from Allan W. Nielsen.

  2) Eric Dumazet found some more of the typical "pskb_may_pull() -->
     oops forgot to reload the header pointer" bugs in ipv6 tunnel
     handling.

  3) Bad SKB socket pointer in ipv6 fragmentation handling, from Herbert
     Xu.

  4) Overflow fix in sk_msg_clone(), from Vakul Garg.

  5) Validate address lengths in AF_PACKET, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  qmi_wwan: Fix qmap header retrieval in qmimux_rx_fixup
  qmi_wwan: Add support for Fibocom NL678 series
  tls: Do not call sk_memcopy_from_iter with zero length
  ipv6: tunnels: fix two use-after-free
  Prevent overflow of sk_msg in sk_msg_clone()
  packet: validate address length
  net: netxen: fix a missing check and an uninitialized use
  tcp: fix a race in inet_diag_dump_icsk()
  MAINTAINERS: update cxgb4 and cxgb3 maintainer
  ipv6: frags: Fix bogus skb->sk in reassembled packets
  mscc: Configured MAC entries should be locked.

The function of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.

su_get_type() doesn't do that. The match node are used as an identifier
to compare against the current node, so we can directly drop the refcount
after getting the node from the path as it is not used as pointer.

Fix this by use a single variable and drop the refcount right after
of_find_node_by_path().
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While checking boot log from SPARC qemu, I saw that the "ARCH: sunxx"
information was split on two different line.
This patchs merge both line together.
In the meantime, thoses information need to be printed via pr_info
since printk print them by default via the warning loglevel.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

GNU linker's -z common-page-size's default value is based on the target
architecture. arch/sparc/vdso/Makefile sets it to the architecture
default, which is implicit and redundant. Drop it.

Link: https://lkml.kernel.org/r/20181206191231.192355-1-ndesaulniers@google.comSigned-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull kvm fix from Paolo Bonzini:
 "A simple patch for a pretty bad bug: Unbreak AMD nested
  virtualization."

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: nSVM: fix switch to guest mmu

This patch fixes qmap header retrieval when modem is configured for
dl data aggregation.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull timer fix from Ingo Molnar:
 "Fix a division by zero crash in the posix-timers code"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-timers: Fix division by zero bug

Added support for Fibocom NL678 series cellular module QMI interface.
Using QMI_QUIRK_SET_DTR required for Qualcomm MDM9x40 series chipsets.
Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In some conditions e.g. when tls_clone_plaintext_msg() returns -ENOSPC,
the number of bytes to be copied using subsequent function
sk_msg_memcopy_from_iter() becomes zero. This causes function
sk_msg_memcopy_from_iter() to fail which in turn causes tls_sw_sendmsg()
to return failure. To prevent it, do not call sk_msg_memcopy_from_iter()
when number of bytes to copy (indicated by 'try_to_copy') is zero.

Fixes: d829e9c4 ("tls: convert to generic sk_msg interface")
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
net: skb extension follow-ups

This series includes some follow-up for the recently added skb extension.
The first patch addresses an unlikely race while adding skb extensions,
and the following two are just minor code clean-up.

v1 -> v2:
 - be sure to flag the newly added extension as active in skb_ext_add()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When the extension to be added is already present, the only
skb field we may need to update is 'extensions': we can reorder
the code and avoid a branch.

v1 -> v2:
 - be sure to flag the newly added extension as active
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Such helper is currently unused, and skb extension users are
better off using skb_ext_add()/skb_ext_del(). So let's drop
it.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

On cow we can free the old extension: we must avoid dereferencing
such extension after skb_ext_maybe_cow(). Since 'new' contents
are always equal to 'old' after the copy, we can fix the above
accessing the relevant data using 'new'.

Fixes: df5042f4 ("sk_buff: add skb extension infrastructure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull futex fix from Ingo Molnar:
 "A single fix for a robust futexes race between sys_exit() and
  sys_futex_lock_pi()"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Cure exit race

Pull x86 fixes from Ingo Molnar:
 "The biggest part is a series of reverts for the macro based GCC
  inlining workarounds. It caused regressions in distro build and other
  kernel tooling environments, and the GCC project was very receptive to
  fixing the underlying inliner weaknesses - so as time ran out we
  decided to do a reasonably straightforward revert of the patches. The
  plan is to rely on the 'asm inline' GCC 9 feature, which might be
  backported to GCC 8 and could thus become reasonably widely available
  on modern distros.

  Other than those reverts, there's misc fixes from all around the
  place.

  I wish our final x86 pull request for v4.20 was smaller..."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "kbuild/Makefile: Prepare for using macros in inline assembly code to work around asm() related GCC inlining bugs"
  Revert "x86/objtool: Use asm macros to work around GCC inlining bugs"
  Revert "x86/refcount: Work around GCC inlining bug"
  Revert "x86/alternatives: Macrofy lock prefixes to work around GCC inlining bugs"
  Revert "x86/bug: Macrofy the BUG table section handling, to work around GCC inlining bugs"
  Revert "x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops"
  Revert "x86/extable: Macrofy inline assembly code to work around GCC inlining bugs"
  Revert "x86/cpufeature: Macrofy inline assembly code to work around GCC inlining bugs"
  Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"
  x86/mtrr: Don't copy uninitialized gentry fields back to userspace
  x86/fsgsbase/64: Fix the base write helper functions
  x86/mm/cpa: Fix cpa_flush_array() TLB invalidation
  x86/vdso: Pass --eh-frame-hdr to the linker
  x86/mm: Fix decoy address handling vs 32-bit builds
  x86/intel_rdt: Ensure a CPU remains online for the region's pseudo-locking sequence
  x86/dump_pagetables: Fix LDT remap address marker
  x86/mm: Fix guard hole handling

xfrm6_policy_check() might have re-allocated skb->head, we need
to reload ipv6 header pointer.

sysbot reported :

BUG: KASAN: use-after-free in __ipv6_addr_type+0x302/0x32f net/ipv6/addrconf_core.c:40
Read of size 4 at addr ffff888191b8cb70 by task syz-executor2/1304

CPU: 0 PID: 1304 Comm: syz-executor2 Not tainted 4.20.0-rc7+ #356
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x244/0x39d lib/dump_stack.c:113
 print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412
 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:432
 __ipv6_addr_type+0x302/0x32f net/ipv6/addrconf_core.c:40
 ipv6_addr_type include/net/ipv6.h:403 [inline]
 ip6_tnl_get_cap+0x27/0x190 net/ipv6/ip6_tunnel.c:727
 ip6_tnl_rcv_ctl+0xdb/0x2a0 net/ipv6/ip6_tunnel.c:757
 vti6_rcv+0x336/0x8f3 net/ipv6/ip6_vti.c:321
 xfrm6_ipcomp_rcv+0x1a5/0x3a0 net/ipv6/xfrm6_protocol.c:132
 ip6_protocol_deliver_rcu+0x372/0x1940 net/ipv6/ip6_input.c:394
 ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:434
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:443
IPVS: ftp: loaded support on port[0] = 21
 ip6_mc_input+0x514/0x11c0 net/ipv6/ip6_input.c:537
 dst_input include/net/dst.h:450 [inline]
 ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ipv6_rcv+0x115/0x640 net/ipv6/ip6_input.c:272
 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4973
 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5083
 process_backlog+0x24e/0x7a0 net/core/dev.c:5923
 napi_poll net/core/dev.c:6346 [inline]
 net_rx_action+0x7fa/0x19b0 net/core/dev.c:6412
 __do_softirq+0x308/0xb7e kernel/softirq.c:292
 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1027
 </IRQ>
 do_softirq.part.14+0x126/0x160 kernel/softirq.c:337
 do_softirq+0x19/0x20 kernel/softirq.c:340
 netif_rx_ni+0x521/0x860 net/core/dev.c:4569
 dev_loopback_xmit+0x287/0x8c0 net/core/dev.c:3576
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ip6_finish_output2+0x193a/0x2930 net/ipv6/ip6_output.c:84
 ip6_fragment+0x2b06/0x3850 net/ipv6/ip6_output.c:727
 ip6_finish_output+0x6b7/0xc50 net/ipv6/ip6_output.c:152
 NF_HOOK_COND include/linux/netfilter.h:278 [inline]
 ip6_output+0x232/0x9d0 net/ipv6/ip6_output.c:171
 dst_output include/net/dst.h:444 [inline]
 ip6_local_out+0xc5/0x1b0 net/ipv6/output_core.c:176
 ip6_send_skb+0xbc/0x340 net/ipv6/ip6_output.c:1727
 ip6_push_pending_frames+0xc5/0xf0 net/ipv6/ip6_output.c:1747
 rawv6_push_pending_frames net/ipv6/raw.c:615 [inline]
 rawv6_sendmsg+0x3a3e/0x4b40 net/ipv6/raw.c:945
kobject: 'queues' (0000000089e6eea2): kobject_add_internal: parent: 'tunl0', set: '<NULL>'
kobject: 'queues' (0000000089e6eea2): kobject_uevent_env
 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
kobject: 'queues' (0000000089e6eea2): kobject_uevent_env: filter function caused the event to drop!
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:631
 sock_write_iter+0x35e/0x5c0 net/socket.c:900
 call_write_iter include/linux/fs.h:1857 [inline]
 new_sync_write fs/read_write.c:474 [inline]
 __vfs_write+0x6b8/0x9f0 fs/read_write.c:487
kobject: 'rx-0' (00000000e2d902d9): kobject_add_internal: parent: 'queues', set: 'queues'
kobject: 'rx-0' (00000000e2d902d9): kobject_uevent_env
 vfs_write+0x1fc/0x560 fs/read_write.c:549
 ksys_write+0x101/0x260 fs/read_write.c:598
kobject: 'rx-0' (00000000e2d902d9): fill_kobj_path: path = '/devices/virtual/net/tunl0/queues/rx-0'
 __do_sys_write fs/read_write.c:610 [inline]
 __se_sys_write fs/read_write.c:607 [inline]
 __x64_sys_write+0x73/0xb0 fs/read_write.c:607
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
kobject: 'tx-0' (00000000443b70ac): kobject_add_internal: parent: 'queues', set: 'queues'
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457669
Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f9bd200bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457669
RDX: 000000000000058f RSI: 00000000200033c0 RDI: 0000000000000003
kobject: 'tx-0' (00000000443b70ac): kobject_uevent_env
RBP: 000000000072bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9bd200c6d4
R13: 00000000004c2dcc R14: 00000000004da398 R15: 00000000ffffffff

Allocated by task 1304:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
 __do_kmalloc_node mm/slab.c:3684 [inline]
 __kmalloc_node_track_caller+0x50/0x70 mm/slab.c:3698
 __kmalloc_reserve.isra.41+0x41/0xe0 net/core/skbuff.c:140
 __alloc_skb+0x155/0x760 net/core/skbuff.c:208
kobject: 'tx-0' (00000000443b70ac): fill_kobj_path: path = '/devices/virtual/net/tunl0/queues/tx-0'
 alloc_skb include/linux/skbuff.h:1011 [inline]
 __ip6_append_data.isra.49+0x2f1a/0x3f50 net/ipv6/ip6_output.c:1450
 ip6_append_data+0x1bc/0x2d0 net/ipv6/ip6_output.c:1619
 rawv6_sendmsg+0x15ab/0x4b40 net/ipv6/raw.c:938
 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:631
 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2116
 __sys_sendmsg+0x11d/0x280 net/socket.c:2154
 __do_sys_sendmsg net/socket.c:2163 [inline]
 __se_sys_sendmsg net/socket.c:2161 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2161
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
kobject: 'gre0' (00000000cb1b2d7b): kobject_add_internal: parent: 'net', set: 'devices'

Freed by task 1304:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
 __cache_free mm/slab.c:3498 [inline]
 kfree+0xcf/0x230 mm/slab.c:3817
 skb_free_head+0x93/0xb0 net/core/skbuff.c:553
 pskb_expand_head+0x3b2/0x10d0 net/core/skbuff.c:1498
 __pskb_pull_tail+0x156/0x18a0 net/core/skbuff.c:1896
 pskb_may_pull include/linux/skbuff.h:2188 [inline]
 _decode_session6+0xd11/0x14d0 net/ipv6/xfrm6_policy.c:150
 __xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:3272
kobject: 'gre0' (00000000cb1b2d7b): kobject_uevent_env
 __xfrm_policy_check+0x380/0x2c40 net/xfrm/xfrm_policy.c:3322
 __xfrm_policy_check2 include/net/xfrm.h:1170 [inline]
 xfrm_policy_check include/net/xfrm.h:1175 [inline]
 xfrm6_policy_check include/net/xfrm.h:1185 [inline]
 vti6_rcv+0x4bd/0x8f3 net/ipv6/ip6_vti.c:316
 xfrm6_ipcomp_rcv+0x1a5/0x3a0 net/ipv6/xfrm6_protocol.c:132
 ip6_protocol_deliver_rcu+0x372/0x1940 net/ipv6/ip6_input.c:394
 ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:434
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:443
 ip6_mc_input+0x514/0x11c0 net/ipv6/ip6_input.c:537
 dst_input include/net/dst.h:450 [inline]
 ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76
 NF_HOOK include/linux/netfilter.h:289 [inline]
 ipv6_rcv+0x115/0x640 net/ipv6/ip6_input.c:272
 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4973
 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5083
 process_backlog+0x24e/0x7a0 net/core/dev.c:5923
kobject: 'gre0' (00000000cb1b2d7b): fill_kobj_path: path = '/devices/virtual/net/gre0'
 napi_poll net/core/dev.c:6346 [inline]
 net_rx_action+0x7fa/0x19b0 net/core/dev.c:6412
 __do_softirq+0x308/0xb7e kernel/softirq.c:292

The buggy address belongs to the object at ffff888191b8cac0
 which belongs to the cache kmalloc-512 of size 512
The buggy address is located 176 bytes inside of
 512-byte region [ffff888191b8cac0, ffff888191b8ccc0)
The buggy address belongs to the page:
page:ffffea000646e300 count:1 mapcount:0 mapping:ffff8881da800940 index:0x0
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 ffffea0006eaaa48 ffffea00065356c8 ffff8881da800940
raw: 0000000000000000 ffff888191b8c0c0 0000000100000006 0000000000000000
page dumped because: kasan: bad access detected
kobject: 'queues' (000000005fd6226e): kobject_add_internal: parent: 'gre0', set: '<NULL>'

Memory state around the buggy address:
 ffff888191b8ca00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff888191b8ca80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
>ffff888191b8cb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                             ^
 ffff888191b8cb80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888191b8cc00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 0d3c703a ("ipv6: Cleanup IPv6 tunnel receive path")
Fixes: ed1efb2a ("ipv6: Add support for IPsec virtual tunnel interfaces")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull final drm fix from Daniel Vetter:
 "Very calm week, so either everything perfect or everyone on holidays
  already. Just one array_index_nospec patch, also for stable"

* tag 'drm-fixes-2018-12-21' of git://anongit.freedesktop.org/drm/drm:
  drm/ioctl: Fix Spectre v1 vulnerabilities

Fixed function sk_msg_clone() to prevent overflow of 'dst' while adding
pages in scatterlist entries. The overflow of 'dst' causes crash in kernel
tls module while doing record encryption.

Crash fixed by this patch.

[   78.796119] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[   78.804900] Mem abort info:
[   78.807683]   ESR = 0x96000004
[   78.810744]   Exception class = DABT (current EL), IL = 32 bits
[   78.816677]   SET = 0, FnV = 0
[   78.819727]   EA = 0, S1PTW = 0
[   78.822873] Data abort info:
[   78.825759]   ISV = 0, ISS = 0x00000004
[   78.829600]   CM = 0, WnR = 0
[   78.832576] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000bf8ee311
[   78.839195] [0000000000000008] pgd=0000000000000000
[   78.844081] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[   78.849642] Modules linked in: tls xt_conntrack ipt_REJECT nf_reject_ipv4 ip6table_filter ip6_tables xt_CHECKSUM cpve cpufreq_conservative lm90 ina2xx crct10dif_ce
[   78.865377] CPU: 0 PID: 6007 Comm: openssl Not tainted 4.20.0-rc6-01647-g754d5da6-dirty #107
[   78.874149] Hardware name: LS1043A RDB Board (DT)
[   78.878844] pstate: 60000005 (nZCv daif -PAN -UAO)
[   78.883632] pc : scatterwalk_copychunks+0x164/0x1c8
[   78.888500] lr : scatterwalk_copychunks+0x160/0x1c8
[   78.893366] sp : ffff00001d04b600
[   78.896668] x29: ffff00001d04b600 x28: ffff80006814c680
[   78.901970] x27: 0000000000000000 x26: ffff80006c8de786
[   78.907272] x25: ffff00001d04b760 x24: 000000000000001a
[   78.912573] x23: 0000000000000006 x22: ffff80006814e440
[   78.917874] x21: 0000000000000100 x20: 0000000000000000
[   78.923175] x19: 000081ffffffffff x18: 0000000000000400
[   78.928476] x17: 0000000000000008 x16: 0000000000000000
[   78.933778] x15: 0000000000000100 x14: 0000000000000001
[   78.939079] x13: 0000000000001080 x12: 0000000000000020
[   78.944381] x11: 0000000000001080 x10: 00000000ffff0002
[   78.949683] x9 : ffff80006814c248 x8 : 00000000ffff0000
[   78.954985] x7 : ffff80006814c318 x6 : ffff80006c8de786
[   78.960286] x5 : 0000000000000f80 x4 : ffff80006c8de000
[   78.965588] x3 : 0000000000000000 x2 : 0000000000001086
[   78.970889] x1 : ffff7e0001b74e02 x0 : 0000000000000000
[   78.976192] Process openssl (pid: 6007, stack limit = 0x00000000291367f9)
[   78.982968] Call trace:
[   78.985406]  scatterwalk_copychunks+0x164/0x1c8
[   78.989927]  skcipher_walk_next+0x28c/0x448
[   78.994099]  skcipher_walk_done+0xfc/0x258
[   78.998187]  gcm_encrypt+0x434/0x4c0
[   79.001758]  tls_push_record+0x354/0xa58 [tls]
[   79.006194]  bpf_exec_tx_verdict+0x1e4/0x3e8 [tls]
[   79.010978]  tls_sw_sendmsg+0x650/0x780 [tls]
[   79.015326]  inet_sendmsg+0x2c/0xf8
[   79.018806]  sock_sendmsg+0x18/0x30
[   79.022284]  __sys_sendto+0x104/0x138
[   79.025935]  __arm64_sys_sendto+0x24/0x30
[   79.029936]  el0_svc_common+0x60/0xe8
[   79.033588]  el0_svc_handler+0x2c/0x80
[   79.037327]  el0_svc+0x8/0xc
[   79.040200] Code: 6b01005f 54fff788 940169b1 f9000320 (b9400801)
[   79.046283] ---[ end trace 74db007d069c1cf7 ]---

Fixes: d829e9c4 ("tls: convert to generic sk_msg interface")
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Packet sockets with SOCK_DGRAM may pass an address for use in
dev_hard_header. Ensure that it is of sufficient length.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull input fixes from Dmitry Torokhov:
 "Switching a few devices with Synaptics over to SMbus and disabling
  SMbus on a couple devices with Elan touchpads as they need more
  plumbing on PS/2 side"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - enable SMBus for HP EliteBook 840 G4
  Input: elantech - disable elan-i2c for P52 and P72
  Input: synaptics - enable RMI on ThinkPad T560
  Input: omap-keypad - fix idle configuration to not block SoC idle states

Pull GPIO fixes from Linus Walleij:
 "Hopefully last round of GPIO fixes.

  The ACPI patch is pretty important for some laptop users, the rest is
  driver-specific for embedded (mostly ARM) systems.

  I took out one ACPI patch that wasn't critical enough because I
  couldn't justify sending it at this point, and that is why the commit
  date is today, but the patches have been in linux-next.

  Sorry for not sending some of them earlier :(

  Notice that we have a co-maintainer for GPIO now, Bartosz Golaszewski,
  and he might jump in and make some pull requests at times when I am
  off.

  Summary:

   - ACPI IRQ request deferral

   - OMAP: revert deferred wakeup quirk

   - MAX7301: fix DMA safe memory handling

   - MVEBU: selective probe failure on missing clk"

* tag 'gpio-v4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: mvebu: only fail on missing clk if pwm is actually to be used
  gpio: max7301: fix driver for use with CONFIG_VMAP_STACK
  gpio: gpio-omap: Revert deferred wakeup quirk handling for regressions
  gpiolib-acpi: Only defer request_irq for GpioInt ACPI event handlers

When netxen_rom_fast_read() fails, "bios" is left uninitialized and may
contain random value, thus should not be used.

The fix ensures that if netxen_rom_fast_read() fails, we return "-EIO".
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Minor fallout from merge resolution, test_verifier was segfaulting
because the REJECT result was correct, but errstr was NULL. Properly
fix it as in 339bbff2.

Fixes: 339bbff2 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull smb3 fix from Steve French:
 "An important smb3 fix for an regression to some servers introduced by
  compounding optimization to rmdir.

  This fix has been tested by multiple developers (including me) with
  the usual private xfstesting, but also by the new cifs/smb3 "buildbot"
  xfstest VMs (thank you Ronnie and Aurelien for good work on this
  automation). The automated testing has been updated so that it will
  catch problems like this in the future.

  Note that Pavel discovered (very recently) some unrelated but
  extremely important bugs in credit handling (smb3 flow control problem
  that can lead to disconnects/reconnects) when compounding, that I
  would have liked to send in ASAP but the complete testing of those two
  fixes may not be done in time and have to wait for 4.21"

* tag '4.20-rc7-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: Fix rmdir compounding regression to strict servers

Saeed Mahameed says:

====================
mlx5-XDP-100Mpps

This series from Tariq, mainly adds the support of mlx5 Multi Packet WQE
(TX descriptor) - ConnectX-5 and above - for XDP TX, which allows us to
overcome the 70Mpps PCIe bottleneck of conventional TX queues (single TX
descriptor per packet), and achieve the 100Mpps milestone with the MPWQE
approach.

In the first five patches, Tariq did minor improvements to mlx5 tx path,
for better debug-ability and code structuring.

Next two patches lay down the foundation for MPWQE implementation to store
the in-flight XDP TX information for multiple packets of one descriptor
(WQE).

Next: Support Enhanced Multi-Packet TX WQE for XDP

In this patch we add support for the HW feature, which is supported
starting from ConnectX-5.

Performance:
Tested packet rate for UDP 64Byte multi-stream over ConnectX-5 NICs.
CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz

XDP_TX:
We see a huge gain on single port ConnectX-5, and reach the 100 Mpps
milestone.
* Single-port HCA:
	Before:   70 Mpps
	After:   100 Mpps (+42.8%)

* Dual-port HCA:
	Before: 51.7 Mpps
	After:  57.3 Mpps (+10.8%)

* In both cases we tested traffic on one port and for now On Dual-port
  HCAs we see only a small gain, we are working to overcome this
  bottleneck, but for the moment only with experimental firmware on dual
  port HCAs we can reach the wanted numbers as seen on Single-port HCAs.

XDP_REDIRECT:
Redirect from (A) ConnectX-5 to (B) ConnectX-5.
Due to a setup limitation, (A) and (B) are on different NUMA nodes,
so absolute performance numbers are not optimal.
- Note:
  Below is the transmit rate of (B), not the redirect rate of (A)
  which is in some cases higher.

* (B) is single-port:
	Before:   77 Mpps
	After:    90 Mpps (+16.8%)

* (B) is dual-port:
	Before:  61 Mpps
	After:   72 Mpps (+18%)

Last patch adds a knob in mlx5 ethtool private flag to turn on/off
XDP TX MPWQE.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

dmesg reports that "Your touchpad (PNP: SYN3052 SYN0100 SYN0002 PNP0f13)
says it can support a different bus."

I've tested the offered psmouse.synaptics_intertouch=1 with 4.18.x and
4.19.x and it seems to work well. No problems seen with suspend/resume.

Also, it appears that RMI/SMBus mode is actually required for 3-4 finger
multitouch gestures to work -- otherwise they are not reported at all.

Information from dmesg in both modes:

  psmouse serio3: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1,
      caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3139, fw id: 2000742

  psmouse serio3: synaptics: Trying to set up SMBus access
  rmi4_smbus 6-002c: registering SMbus-connected sensor
  rmi4_f01 rmi4-00.fn01: found RMI device,
      manufacturer: Synaptics, product: TM3139-001, fw id: 2000742
Signed-off-by: Mantas Mikulėnas <grawity@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The current implementation of elan_i2c is known to not support those
2 laptops.

A proper fix is to tweak both elantech and elan_i2c to transmit the
correct information from PS/2, which would make a bad candidate for
stable.

So to give us some time for fixing the root of the problem, disable
elan_i2c for the devices we know are not behaving properly.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1803600
Link: https://bugs.archlinux.org/task/59714
Fixes: df077237 Input: elantech - detect new ICs and setup Host Notify for them

Cc: stable@vger.kernel.org  # v4.18+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The gpio IP on Armada 370 at offset 0x18180 has neither a clk nor pwm
registers. So there is no need for a clk as the pwm isn't used anyhow.
So only check for the clk in the presence of the pwm registers. This fixes
a failure to probe the gpio driver for the above mentioned gpio device.

Fixes: 757642f9 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

spi_read() and spi_write() require DMA-safe memory. When
CONFIG_VMAP_STACK is selected, those functions cannot be used
with buffers on stack.

This patch replaces calls to spi_read() and spi_write() by
spi_write_then_read() which doesn't require DMA-safe buffers.

Fixes: 0c36ec31 ("gpio: gpio driver for max7301 SPI GPIO expander")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Commit ec0daae6 ("gpio: omap: Add level wakeup handling for omap4
based SoCs") attempted to fix omap4 GPIO wakeup handling as it was
blocking deeper SoC idle states. However this caused a regression for
GPIOs during runtime having over second long latencies for Ethernet
GPIO interrupt as reportedy by Russell King <rmk+kernel@armlinux.org.uk>.

Let's fix this issue by doing a partial revert of the breaking commit.
We still want to keep the quirk handling around as it is also used for
OMAP_GPIO_QUIRK_IDLE_REMOVE_TRIGGER.

The real fix for omap4 GPIO wakeup handling involves fixes for
omap_set_gpio_trigger() and omap_gpio_unmask_irq() and will be posted
separately. And we must keep the wakeup bit enabled during runtime
because of module doing clock autogating with autoidle configured.
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Fixes: ec0daae6 ("gpio: omap: Add level wakeup handling for omap4
based SoCs")
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add ethtool private flag 'xdp_tx_mpwqe' to control the feature
from userspace.
Feature is set ON by default, if supported.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add support for the HW feature of multi-packet WQE in XDP
xmit flow.

The conventional TX descriptor (WQE, Work Queue Element) serves
a single packet. Our HW has support for multi-packet WQE (MPWQE)
in which a single descriptor serves multiple TX packets.

This reduces both the PCI overhead and the CPU cycles wasted on
writing them.

In this patch we add support for the HW feature, which is supported
starting from ConnectX-5.

Performance:
Tested packet rate for UDP 64Byte multi-stream over ConnectX-5 NICs.
CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz

XDP_TX:
We see a huge gain on single port ConnectX-5, and reach the 100 Mpps
milestone.
* Single-port HCA:
	Before:   70 Mpps
	After:   100 Mpps (+42.8%)

* Dual-port HCA:
	Before: 51.7 Mpps
	After:  57.3 Mpps (+10.8%)

* In both cases we tested traffic on one port and for now On Dual-port HCAs
  we see only small gain, we are working to overcome this bottleneck, but
  for the moment only with experimental firmware on dual port HCAs we can
  reach the wanted numbers as seen on Single-port HCAs.

XDP_REDIRECT:
Redirect from (A) ConnectX-5 to (B) ConnectX-5.
Due to a setup limitation, (A) and (B) are on different NUMA nodes,
so absolute performance numbers are not optimal.
Note:
  Below is the transmit rate of (B), not the redirect rate of (A)
  which is in some cases higher.

* (B) is single-port:
	Before:   77 Mpps
	After:    90 Mpps (+16.8%)

* (B) is dual-port:
	Before:  61 Mpps
	After:   72 Mpps (+18%)
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Each xdp_wqe_info instance describes the number of data-segments
and WQEBBs of the WQE.
This is useful for a downstream patch that adds support for
Multi-Packet TX WQE feature.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>