This is a cascaded interrupt controller in the AP806 GIC that collapses
SEIs (System Error Interrupt) coming from the AP and the CPs (through
the ICU).

The SEI handles up to 64 interrupts. The first 21 interrupts are wired
from the AP. The next 43 interrupts are from the CPs and are triggered
through MSI messages. To handle this complexity, the driver has to
declare to the upper layer: one IRQ domain for the wired interrupts,
one IRQ domain for the MSIs; and acts as a MSI controller ('parent')
by declaring an MSI domain.
Suggested-by: Haim Boot <hayim@marvell.com>
Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

The ICU can handle several type of interrupt, each of them being handled
differently on AP side. On CP side, the ICU should be able to make the
distinction between each interrupt group by pointing to the right parent.

This is done through the introduction of new bindings, presenting the ICU
node as the parent of multiple ICU sub-nodes, each of them being an
interrupt type with a different interrupt parent. ICU interrupt 'clients'
now directly point to the right sub-node, avoiding the need for the extra
ICU_GRP_* parameter.

ICU subnodes are probed automatically with devm_platform_populate(). If
the node as no child, the probe function for NSRs will still be called
'manually' in order to preserve backward compatibility with DT using the
old binding.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

NSR (non-secure interrupts) are handled in the ICU driver like if there
was only this type of interrupt in the ICU. Change this behavior to
prepare the introduction of SEI (System Error Interrupts) support by
moving the NSR code in a separate function. This is done under the form
of a 'probe' function to ease future migration to NSR/SEI being platform
devices part of the ICU. The 'icu' structure is passed as driver data
and not as a parameter for the same reason.
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Rewrite a small section to clarify the reset operation of interrupts
already configured by ATF that we want to handle in the driver. This
will simplify the introduction of System Error Interrupts support.
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

The irq_domain structure has an host_data pointer that just stores
private data. It is meant to not be touched by the IRQ core. However,
when it comes to MSI, the MSI layer adds its own private data there
with a structure that also has a host_data pointer.

Because this IRQ domain is an MSI domain, to access private data we
should do a d->host_data->host_data, also wrapped as
'platform_msi_get_host_data()'.

This bug was lying there silently because the 'icu' structure retrieved
this way was just called by dev_err(), only producing a
'(NULL device *):' output on the console.
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

ICU size in CP110 is not 0x10 but at least 0x440 bytes long (from the
specification).
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

platform_msi_create_device_domain() always creates a revmap-based
irqdomain, which has the drawback of requiring the number of MSIs
that can be allocated ahead of time. This is not always possible,
and we sometimes need to use a tree-based irqdomain instead.

Add a new platform_msi_create_device_tree_domain() helper to
that effect.
Reported-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Document RZ/G1N (R8A7744) SoC bindings.
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Document support for the Interrupt Controller for External Devices
(INTC-EX) in the Renesas E3 (r8a77990) SoC.

No driver update is needed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

The PDC irqchp can convert a falling edge or level low interrupt to a
rising edge or level high interrupt at the GIC. We just need to setup
the GIC correctly. Set up the interrupt type for the IRQ_TYPE_EDGE_BOTH
as IRQ_TYPE_EDGE_RISING at the GIC.

Fixes: f55c73ae ("irqchip/pdc: Add PDC interrupt controller for QCOM SoCs")
Reported-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

If the LPI tables have been reserved with the EFI reservation
mechanism, we assume that these tables are safe to use even
when we find the redistributors to have LPIs enabled at
boot time, meaning that kexec can now work with GICv3.

You're welcome.
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Upon enabling a redistributor, let's register the allocated tables
with the EFI table that tracks the memory reservations.
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

If booting with LPIs enabled, all the redistributors must have the
exact same property table. No ifs, no buts.
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

If using a kdump kernel, and that we cannot disable LPIs to install
our own tables, let's switch to using the already allocated tables.

This means that we'll change some of the initial kernel's memory,
but at least we'll be able to have LPIs in this secondary kernel.
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

In order to cope with kexec and GICv3, let's try and spot when
we're booting with LPIs already enabled, and the tables already
programmed into the redistributors.

This code is currently guarded by a predicate that is always false,
meaning this is not functionnal just yet.
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

We're currently only tracking the page allocated to contain the
property table by its struct page. In the future, it is going to
be convenient to track both PA and VA for that page instead. Let's
do that.
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Pending tables for the redistributors are currently allocated
one at a time as each CPU boots. This is causing some grief
for Linux/RT (allocation from within a CPU hotplug notifier is
frown upon).

Let's move this allocation to take place at init time, when we
only have a single CPU. It means we're allocating memory for CPUs
that are not online yet, but most system will boot all of their
CPUs anyway, so that's not completely wasted.
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

As we're going to reuse some pre-allocated memory for the property
table, split out the zeroing of that table into a separate function
for later use.
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

LPI_PENDING_SZ is always used in conjunction with a max(), which doesn't
make much sense, since we're guaranteed that LPI_PENDING_SZ is already
aligned to 64K. Let's remove it.
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

We currently initialize the LPIs (and the ITS) fairly early, even
before the SMP support and the CPU interface. This is a bit odd
(as LPIs are not exactly crutial for the early boot process),
and is going to cause issues when reorganizing the probing code.

Let's move this initialization later.
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Add kernel plumbing to reserve memory regions persistently on a EFI
system by adding entries to the MEMRESERVE linked list.
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Installing UEFI configuration tables can only be done before calling
ExitBootServices(), so if we want to use the new MEMRESRVE config table
from the kernel proper, we need to install a dummy entry from the stub.
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

In order to allow the OS to reserve memory persistently across a
kexec, introduce a Linux-specific UEFI configuration table that
points to the head of a linked list in memory, allowing each kernel
to add list items describing memory regions that the next kernel
should treat as reserved.

This is useful, e.g., for GICv3 based ARM systems that cannot disable
DMA access to the LPI tables, forcing them to reuse the same memory
region again after a kexec reboot.
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Prevent multiplication result truncation on 32bit. Introduced with
     the early timestamp reworrk.

   - Ensure microcode revision storage to be consistent under all
     circumstances

   - Prevent write tearing of PTEs

   - Prevent confusion of user and kernel reegisters when dumping fatal
     signals verbosely

   - Make an error return value in a failure path of the vector
     allocation negative. Returning EINVAL might the caller assume
     success and causes further wreckage.

   - A trivial kernel doc warning fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Use WRITE_ONCE() when setting PTEs
  x86/apic/vector: Make error return value negative
  x86/process: Don't mix user/kernel regs in 64bit __show_regs()
  x86/tsc: Prevent result truncation on 32bit
  x86: Fix kernel-doc atomic.h warnings
  x86/microcode: Update the new microcode revision unconditionally
  x86/microcode: Make sure boot_cpu_data.microcode is up-to-date

Pull timekeeping fixes from Thomas Gleixner:
 "Two fixes for timekeeping:

   - Revert to the previous kthread based update, which is unfortunately
     required due to lock ordering issues. The removal caused boot
     failures on old Core2 machines. Add a proper comment why the thread
     needs to stay to prevent accidental removal in the future.

   - Fix a silly typo in a function declaration"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: Revert "Remove kthread"
  timekeeping: Fix declaration of read_persistent_wall_and_boot_offset()

Pull irqchip fix from Thomas Gleixner:
 "A single fix to prevent allocating excessive memory in the GIC/ITS
  driver.

  While the subject of the patch might suggest otherwise this is a real
  fix as some SoCs exceed the memory allocation limits and fail to boot"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Cap lpi_id_bits to reduce memory footprint

Pull cpu hotplug fixes from Thomas Gleixner:
 "Two fixes for the hotplug state machine code:

   - Move the misplaces smb() in the hotplug thread function to the
     proper place, otherwise a half update control struct could be
     observed

   - Prevent state corruption on error rollback, which causes the state
     to advance by one and as a consequence skip it in the bringup
     sequence"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Prevent state corruption on error rollback
  cpu/hotplug: Adjust misplaced smb() in cpuhp_thread_fun()

Pull random driver fix from Ted Ts'o:
 "Fix things so the choice of whether or not to trust RDRAND to
  initialize the CRNG is configurable via the boot option
  random.trust_cpu={on,off}"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: make CPU trust a boot parameter

Merge tag 'kbuild-fixes-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - make setlocalversion more robust about -dirty check

 - loosen the pkg-config requirement for Kconfig

 - change missing depmod to a warning from an error

 - warn modules_install when System.map is missing

* tag 'kbuild-fixes-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: modules_install: warn when missing System.map file
  kbuild: make missing $DEPMOD a Warning instead of an Error
  kconfig: do not require pkg-config on make {menu,n}config
  kconfig: remove a spurious self-assignment
  scripts/setlocalversion: git: Make -dirty check more robust

If there is no System.map file for "make modules_install",
scripts/depmod.sh will silently exit with success, having done
nothing.  Since this is an unexpected situation, change it to
report a Warning for the missing file.  The behavior is not
changed except for the Warning message.

The (previous) silent success and new Warning can be reproduced
by:
$ make mrproper; make defconfig
$ make modules; make modules_install

and since System.map is produced by "make vmlinux", the steps
above omit producing the System.map file.
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Pull KVM fixes from Radim Krčmář:
 "ARM:
   - Fix a VFP corruption in 32-bit guest
   - Add missing cache invalidation for CoW pages
   - Two small cleanups

  s390:
   - Fallout from the hugetlbfs support: pfmf interpretion and locking
   - VSIE: fix keywrapping for nested guests

  PPC:
   - Fix a bug where pages might not get marked dirty, causing guest
     memory corruption on migration
   - Fix a bug causing reads from guest memory to use the wrong guest
     real address for very large HPT guests (>256G of memory), leading
     to failures in instruction emulation.

  x86:
   - Fix out of bound access from malicious pv ipi hypercalls
     (introduced in rc1)
   - Fix delivery of pending interrupts when entering a nested guest,
     preventing arbitrarily late injection
   - Sanitize kvm_stat output after destroying a guest
   - Fix infinite loop when emulating a nested guest page fault and
     improve the surrounding emulation code
   - Two minor cleanups"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
  KVM: LAPIC: Fix pv ipis out-of-bounds access
  KVM: nVMX: Fix loss of pending IRQ/NMI before entering L2
  arm64: KVM: Remove pgd_lock
  KVM: Remove obsolete kvm_unmap_hva notifier backend
  arm64: KVM: Only force FPEXC32_EL2.EN if trapping FPSIMD
  KVM: arm/arm64: Clean dcache to PoC when changing PTE due to CoW
  KVM: s390: Properly lock mm context allow_gmap_hpage_1m setting
  KVM: s390: vsie: copy wrapping keys to right place
  KVM: s390: Fix pfmf and conditional skey emulation
  tools/kvm_stat: re-animate display of dead guests
  tools/kvm_stat: indicate dead guests as such
  tools/kvm_stat: handle guest removals more gracefully
  tools/kvm_stat: don't reset stats when setting PID filter for debugfs
  tools/kvm_stat: fix updates for dead guests
  tools/kvm_stat: fix handling of invalid paths in debugfs provider
  tools/kvm_stat: fix python3 issues
  KVM: x86: Unexport x86_emulate_instruction()
  KVM: x86: Rename emulate_instruction() to kvm_emulate_instruction()
  KVM: x86: Do not re-{try,execute} after failed emulation in L2
  KVM: x86: Default to not allowing emulation retry in kvm_mmu_page_fault
  ...

Pull ARM SoC fixes from Olof Johansson:
 "A few more fixes who have trickled in:

   - MMC bus width fixup for some Allwinner platforms

   - Fix for NULL deref in ti-aemif when no platform data is passed in

   - Fix div by 0 in SCMI code

   - Add a missing module alias in a new RPi driver"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  memory: ti-aemif: fix a potential NULL-pointer dereference
  firmware: arm_scmi: fix divide by zero when sustained_perf_level is zero
  hwmon: rpi: add module alias to raspberrypi-hwmon
  arm64: allwinner: dts: h6: fix Pine H64 MMC bus width

Merge tag 'sunxi-fixes-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes

Allwinner fixes for 4.19

Just one fix for H6 mmc on the Pine H64: the mmc bus width was missing
from the device tree. This was added in 4.19-rc1.

* tag 'sunxi-fixes-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: allwinner: dts: h6: fix Pine H64 MMC bus width
Signed-off-by: Olof Johansson <olof@lixom.net>

When page-table entries are set, the compiler might optimize their
assignment by using multiple instructions to set the PTE. This might
turn into a security hazard if the user somehow manages to use the
interim PTE. L1TF does not make our lives easier, making even an interim
non-present PTE a security hazard.

Using WRITE_ONCE() to set PTEs and friends should prevent this potential
security hazard.

I skimmed the differences in the binary with and without this patch. The
differences are (obviously) greater when CONFIG_PARAVIRT=n as more
code optimizations are possible. For better and worse, the impact on the
binary with this patch is pretty small. Skimming the code did not cause
anything to jump out as a security hazard, but it seems that at least
move_soft_dirty_pte() caused set_pte_at() to use multiple writes.
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180902181451.80520-1-namit@vmware.com

activate_managed() returns EINVAL instead of -EINVAL in case of
error. While this is unlikely to happen, the positive return value would
cause further malfunction at the call site.

Fixes: 2db1f959 ("x86/vector: Handle managed interrupts proper")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org

Pull i2c fixes from Wolfram Sang:

 - bugfixes for uniphier, i801, and xiic drivers

 - ID removal (never produced) for imx

 - one MAINTAINER addition

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: xiic: Record xilinx i2c with Zynq fragment
  i2c: xiic: Make the start and the byte count write atomic
  i2c: i801: fix DNV's SMBCTRL register offset
  i2c: imx-lpi2c: Remove mx8dv compatible entry
  dt-bindings: imx-lpi2c: Remove mx8dv compatible entry
  i2c: uniphier-f: issue STOP only for last message or I2C_M_STOP
  i2c: uniphier: issue STOP only for last message or I2C_M_STOP

Pull ARC updates from Vineet Gupta:

 - Fix for atomic_fetch_#op  [Will Deacon]

 - Enable per device IOC [Eugeniy Paltsev]

 - Remove redundant gcc version checks [Masahiro Yamada]

 - Miscll platform config/DT updates [Alexey Brodkin]

* tag 'arc-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: don't check for HIGHMEM pages in arch_dma_alloc
  ARC: IOC: panic if both IOC and ZONE_HIGHMEM enabled
  ARC: dma [IOC] Enable per device io coherency
  ARC: dma [IOC]: mark DMA devices connected as dma-coherent
  ARC: atomics: unbork atomic_fetch_##op()
  arc: remove redundant GCC version checks
  ARC: sort Kconfig
  ARC: cleanup show_faulting_vma()
  ARC: [plat-axs*]: Enable SWAP
  ARC: [plat-axs*/plat-hsdk]: Allow U-Boot to pass MAC-address to the kernel
  ARC: configs: cleanup

Fix the cell specification mechanism to allow cells to be pre-created
without having to specify at least one address (the addresses will be
upcalled for).

This allows the cell information preload service to avoid the need to issue
loads of DNS lookups during boot to get the addresses for each cell (500+
lookups for the 'standard' cell list[*]).  The lookups can be done later as
each cell is accessed through the filesystem.

Also remove the print statement that prints a line every time a new cell is
added.

[*] There are 144 cells in the list.  Each cell is first looked up for an
    SRV record, and if that fails, for an AFSDB record.  These get a list
    of server names, each of which then has to be looked up to get the
    addresses for that server.  E.g.:

	dig srv _afs3-vlserver._udp.grand.central.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull MD fixes from Shaohua Li:

 - Fix a locking issue for md-cluster (Guoqing)

 - Fix a sync crash for raid10 (Ni)

 - Fix a reshape bug with raid5 cache enabled (me)

* tag 'md/4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md-cluster: release RESYNC lock after the last resync message
  RAID10 BUG_ON in raise_barrier when force is true and conf->barrier is 0
  md/raid5-cache: disable reshape completely