- 09 Dec, 2018 20 commits
-
-
Masami Hiramatsu authored
Use dyn_event framework for kprobe events. This shows kprobe events on "tracing/dynamic_events" file. User can also define new events via tracing/dynamic_events. Link: http://lkml.kernel.org/r/154140855646.17322.6619219995865980392.stgit@devboxReviewed-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Masami Hiramatsu authored
Add unified dynamic event framework for ftrace kprobes, uprobes and synthetic events. Those dynamic events can be co-exist on same file because those syntax doesn't overlap. This introduces a framework part which provides a unified tracefs interface and operations. Link: http://lkml.kernel.org/r/154140852824.17322.12250362185969352095.stgit@devboxReviewed-by:
-
Masami Hiramatsu authored
Integrate similar argument parsers for kprobes and uprobes events into traceprobe_parse_probe_arg(). Link: http://lkml.kernel.org/r/154140850016.17322.9836787731210512176.stgit@devboxReviewed-by:
-
Masami Hiramatsu authored
Since the event_mutex and synth_event_mutex ordering issue is gone, we can skip existing event check when adding or deleting events, and some redundant code in error path. This changes release_all_synth_events() to abort the process when it hits any error and returns the error code. It succeeds only if it has no error. Link: http://lkml.kernel.org/r/154140847194.17322.17960275728005067803.stgit@devboxReviewed-by:
-
Masami Hiramatsu authored
synthetic event is using synth_event_mutex for protecting synth_event_list, and event_trigger_write() path acquires locks as below order. event_trigger_write(event_mutex) ->trigger_process_regex(trigger_cmd_mutex) ->event_hist_trigger_func(synth_event_mutex) On the other hand, synthetic event creation and deletion paths call trace_add_event_call() and trace_remove_event_call() which acquires event_mutex. In that case, if we keep the synth_event_mutex locked while registering/unregistering synthetic events, its dependency will be inversed. To avoid this issue, current synthetic event is using a 2 phase process to create/delete events. For example, it searches existing events under synth_event_mutex to check for event-name conflicts, and unlocks synth_event_mutex, then registers a new event under event_mutex locked. Finally, it locks synth_event_mutex and tries to add the new event to the list. But it can introduce complexity and a chance for name conflicts. To solve this simpler, this introduces trace_add_event_call_nolock() and trace_remove_event_call_nolock() which don't acquire event_mutex inside. synthetic event can lock event_mutex before synth_event_mutex to solve the lock dependency issue simpler. Link: http://lkml.kernel.org/r/154140844377.17322.13781091165954002713.stgit@devboxReviewed-by: -
Masami Hiramatsu authored
Add a busy check loop in cleanup_all_probes() before trying to remove all events in uprobe_events, the same way that kprobe_events does. Without this change, writing null to uprobe_events will try to remove events but if one of them is enabled, it will stop there leaving some events cleared and others not clceared. With this change, writing null to uprobe_events makes sure all events are not enabled before removing events. So, it clears all events, or returns an error (-EBUSY) with keeping all events. Link: http://lkml.kernel.org/r/154140841557.17322.12653952888762532401.stgit@devboxReviewed-by:
-
Steven Rostedt (VMware) authored
After running several tests, it appears that having the reader wait till half the buffer is full before starting to read (and causing its own events to fill up the ring buffer constantly), works well. It keeps trace-cmd (the main user of this interface) from dominating the traces it records. Signed-off-by: -
Steven Rostedt (VMware) authored
Add a "buffer_percentage" file, that allows users to specify how much of the buffer (percentage of pages) need to be filled before waking up a task blocked on a per cpu trace_pipe_raw file. Signed-off-by: -
Steven Rostedt (VMware) authored
Instead of just waiting for a page to be full before waking up a pending reader, allow the reader to pass in a "percentage" of pages that have content before waking up a reader. This should help keep the process of reading the events not cause wake ups that constantly cause reading of the buffer. Signed-off-by: -
Joe Lawrence authored
When building with -ffunction-sections, the compiler will place each function into its own ELF section, prefixed with ".text". For example, a simple test module with functions test_module_do_work() and test_module_wq_func(): % objdump --section-headers test_module.o | awk '/\.text/{print $2}' .text .text.test_module_do_work .text.test_module_wq_func .init.text .exit.text Adjust the recordmcount scripts to look for ".text" as a section name prefix. This will ensure that those functions will be included in the __mcount_loc relocations: % objdump --reloc --section __mcount_loc test_module.o OFFSET TYPE VALUE 0000000000000000 R_X86_64_64 .text.test_module_do_work 0000000000000008 R_X86_64_64 .text.test_module_wq_func 0000000000000010 R_X86_64_64 .init.text Link: http://lkml.kernel.org/r/1542745158-25392-2-git-send-email-joe.lawrence@redhat.comSigned-off-by:Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by:
-
Dan Carpenter authored
Dan Carpenter reviewed the trace_stack.c code and figured he found an off by one bug. "From reviewing the code, it seems possible for stack_trace_max.nr_entries to be set to .max_entries and in that case we would be reading one element beyond the end of the stack_dump_trace[] array. If it's not set to .max_entries then the bug doesn't affect runtime." Although it looks to be the case, it is not. Because we have: static unsigned long stack_dump_trace[STACK_TRACE_ENTRIES+1] = { [0 ... (STACK_TRACE_ENTRIES)] = ULONG_MAX }; struct stack_trace stack_trace_max = { .max_entries = STACK_TRACE_ENTRIES - 1, .entries = &stack_dump_trace[0], }; And: stack_trace_max.nr_entries = x; for (; x < i; x++) stack_dump_trace[x] = ULONG_MAX; Even if nr_entries equals max_entries, indexing with it into the stack_dump_trace[] array will not overflow the array. But if it is the case, the second part of the conditional that tests stack_dump_trace[nr_entries] to ULONG_MAX will always be true. By applying Dan's patch, it removes the subtle aspect of it and makes the if conditional slightly more efficient. Link: http://lkml.kernel.org/r/20180620110758.crunhd5bfep7zuiz@kili.mountainSigned-off-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
The ret_stack processing is going to change, and that is going to break anything that is accessing the ret_stack directly. One user is the function graph profiler. By using the ftrace_graph_get_ret_stack() helper function, the profiler can access the ret_stack entry without relying on the implementation details of the stack itself. Reviewed-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
Move the function function_graph_ret_addr() to fgraph.c, as the management of the curr_ret_stack is going to change, and all the accesses to ret_stack needs to be done in fgraph.c. Reviewed-by:
-
Steven Rostedt (VMware) authored
Currently the registering of function graph is to pass in a entry and return function. We need to have a way to associate those functions together where the entry can determine to run the return hook. Having a structure that contains both functions will facilitate the process of converting the code to be able to do such. This is similar to the way function hooks are enabled (it passes in ftrace_ops). Instead of passing in the functions to use, a single structure is passed in to the registering function. The unregister function is now passed in the fgraph_ops handle. When we allow more than one callback to the function graph hooks, this will let the system know which one to remove. Reviewed-by:
-
Steven Rostedt (VMware) authored
Rearrange the functions in trace_sched_wakeup.c so that there are fewer #ifdef CONFIG_FUNCTION_TRACER and #ifdef CONFIG_FUNCTION_GRAPH_TRACER, instead of having the #ifdefs spread all over. No functional change is made. Signed-off-by: -
Steven Rostedt (VMware) authored
To make the function graph infrastructure more managable, the code needs to be in its own file (fgraph.c). Move the code that is specific for managing the function graph infrastructure out of ftrace.c and into fgraph.c Reviewed-by:
-
Steven Rostedt (VMware) authored
When the function profiler is not configured, the "graph_time" option is meaningless, as the function profiler is the only thing that makes use of it. Do not expose it if the profiler is not configured. Link: http://lkml.kernel.org/r/20181123061133.GA195223@google.comReported-by:
-
Steven Rostedt (VMware) authored
In order to move function graph infrastructure into its own file (fgraph.h) it needs to access various functions and variables in ftrace.c that are currently static. Create a new file called ftrace-internal.h that holds the function prototypes and the extern declarations of the variables needed by fgraph.c as well, and make them global in ftrace.c such that they can be used outside that file. Reviewed-by:
-
Steven Rostedt (VMware) authored
The curr_ret_stack is no longer set to a negative value when a function is not to be traced by the function graph tracer. Remove the usage of FTRACE_NOTRACE_DEPTH, as it is no longer needed. Reviewed-by:
-
Steven Rostedt (VMware) authored
Functions in the set_graph_notrace no longer subtract FTRACE_NOTRACE_DEPTH from curr_ret_stack, as that is now implemented via the trace_recursion flags. Access to curr_ret_stack no longer needs to worry about checking for this. curr_ret_stack is still initialized to -1, when there's not a shadow stack allocated. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: linux-arm-kernel@lists.infradead.org Acked-by:
Will Deacon <will.deacon@arm.com> Reviewed-by:
-
- 30 Nov, 2018 6 commits
-
-
Steven Rostedt (VMware) authored
In order to make the function graph infrastructure more generic, there can not be code specific for the function_graph tracer in the generic code. This includes the set_graph_notrace logic, that stops all graph calls when a function in the set_graph_notrace is hit. By using the trace_recursion mask, we can use a bit in the current task_struct to implement the notrace code, and move the logic out of fgraph.c and into trace_functions_graph.c and keeps it affecting only the tracer and not all call graph callbacks. Acked-by:
Namhyung Kim <namhyung@kernel.org> Reviewed-by:
-
Steven Rostedt (VMware) authored
As the function graph infrastructure can be used by thing other than tracing, moving the code to its own file out of the trace_functions_graph.c code makes more sense. The fgraph.c file will only contain the infrastructure required to hook into functions and their return code. Reviewed-by:
-
Steven Rostedt (VMware) authored
Commit 588ca1786f2dd ("function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack") removed a parameter from the call ftrace_push_return_trace() that made it so that the entire call was under 80 characters, but it did not remove the line break. There's no reason to break that line up, so make it a single line. Link: http://lkml.kernel.org/r/20181122100322.GN2131@hirez.programming.kicks-ass.netReported-by:Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
The static inline function task_curr_ret_stack() is unused, remove it. Reviewed-by:
-
Steven Rostedt (VMware) authored
The tracefs file set_graph_function is used to only function graph functions that are listed in that file (or all functions if the file is empty). The way this is implemented is that the function graph tracer looks at every function, and if the current depth is zero and the function matches something in the file then it will trace that function. When other functions are called, the depth will be greater than zero (because the original function will be at depth zero), and all functions will be traced where the depth is greater than zero. The issue is that when a function is first entered, and the handler that checks this logic is called, the depth is set to zero. If an interrupt comes in and a function in the interrupt handler is traced, its depth will be greater than zero and it will automatically be traced, even if the original function was not. But because the logic only looks at depth it may trace interrupts when it should not be. The recent design change of the function graph tracer to fix other bugs caused the depth to be zero while the function graph callback handler is being called for a longer time, widening the race of this happening. This bug was actually there for a longer time, but because the race window was so small it seldom happened. The Fixes tag below is for the commit that widen the race window, because that commit belongs to a series that will also help fix the original bug. Cc: stable@kernel.org Fixes: 39eb456d ("function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack") Reported-by:
-
Zenghui Yu authored
After enabling KVM event tracing, almost all of trace_kvm_exit()'s printk shows "kvm_exit: IRQ: ..." even if the actual exception_type is NOT IRQ. More specifically, trace_kvm_exit() is defined in virt/kvm/arm/trace.h by TRACE_EVENT. This slight problem may have existed after commit e6753f23 ("tracepoint: Make rcuidle tracepoint callers use SRCU"). There are two variables in trace_kvm_exit() and __DO_TRACE() which have the same name, *idx*. Thus the actual value of *idx* will be overwritten when tracing. Fix it by adding a simple prefix. Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Wang Haibin <wanghaibin.wang@huawei.com> Cc: linux-trace-devel@vger.kernel.org Cc: stable@vger.kernel.org Fixes: e6753f23 ("tracepoint: Make rcuidle tracepoint callers use SRCU") Reviewed-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
-
- 28 Nov, 2018 14 commits
-
-
Pavankumar Kondeti authored
commit 3f5fe9fe ("sched/debug: Fix task state recording/printout") tried to fix the problem introduced by a previous commit efb40f58 ("sched/tracing: Fix trace_sched_switch task-state printing"). However the prev_state output in sched_switch is still broken. task_state_index() uses fls() which considers the LSB as 1. Left shifting 1 by this value gives an incorrect mapping to the task state. Fix this by decrementing the value returned by __get_task_state() before shifting. Link: http://lkml.kernel.org/r/1540882473-1103-1-git-send-email-pkondeti@codeaurora.org Cc: stable@vger.kernel.org Fixes: 3f5fe9fe ("sched/debug: Fix task state recording/printout") Signed-off-by:
Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
The profiler uses trace->depth to find its entry on the ret_stack, but the depth may not match the actual location of where its entry is (if an interrupt were to preempt the processing of the profiler for another function, the depth and the curr_ret_stack will be different). Have it use the curr_ret_stack as the index to find its ret_stack entry instead of using the depth variable, as that is no longer guaranteed to be the same. Cc: stable@kernel.org Fixes: 03274a3f ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") Reviewed-by:
-
Steven Rostedt (VMware) authored
The function graph profiler uses the ret_stack to store the "subtime" and reuse it by nested functions and also on the return. But the current logic has the profiler callback called before the ret_stack is updated, and it is just modifying the ret_stack that will later be allocated (it's just lucky that the "subtime" is not touched when it is allocated). This could also cause a crash if we are at the end of the ret_stack when this happens. By reversing the order of the allocating the ret_stack and then calling the callbacks attached to a function being traced, the ret_stack entry is no longer used before it is allocated. Cc: stable@kernel.org Fixes: 03274a3f ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") Reviewed-by:
-
Steven Rostedt (VMware) authored
In the past, curr_ret_stack had two functions. One was to denote the depth of the call graph, the other is to keep track of where on the ret_stack the data is used. Although they may be slightly related, there are two cases where they need to be used differently. The one case is that it keeps the ret_stack data from being corrupted by an interrupt coming in and overwriting the data still in use. The other is just to know where the depth of the stack currently is. The function profiler uses the ret_stack to save a "subtime" variable that is part of the data on the ret_stack. If curr_ret_stack is modified too early, then this variable can be corrupted. The "max_depth" option, when set to 1, will record the first functions going into the kernel. To see all top functions (when dealing with timings), the depth variable needs to be lowered before calling the return hook. But by lowering the curr_ret_stack, it makes the data on the ret_stack still being used by the return hook susceptible to being overwritten. Now that there's two variables to handle both cases (curr_ret_depth), we can move them to the locations where they can handle both cases. Cc: stable@kernel.org Fixes: 03274a3f ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") Reviewed-by:
-
Steven Rostedt (VMware) authored
Currently, the depth of the ret_stack is determined by curr_ret_stack index. The issue is that there's a race between setting of the curr_ret_stack and calling of the callback attached to the return of the function. Commit 03274a3f ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") moved the calling of the callback to after the setting of the curr_ret_stack, even stating that it was safe to do so, when in fact, it was the reason there was a barrier() there (yes, I should have commented that barrier()). Not only does the curr_ret_stack keep track of the current call graph depth, it also keeps the ret_stack content from being overwritten by new data. The function profiler, uses the "subtime" variable of ret_stack structure and by moving the curr_ret_stack, it allows for interrupts to use the same structure it was using, corrupting the data, and breaking the profiler. To fix this, there needs to be two variables to handle the call stack depth and the pointer to where the ret_stack is being used, as they need to change at two different locations. Cc: stable@kernel.org Fixes: 03274a3f ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") Reviewed-by:
-
Steven Rostedt (VMware) authored
As all architectures now call function_graph_enter() to do the entry work, no architecture should ever call ftrace_push_return_trace(). Make it static. This is needed to prepare for a fix of a design bug on how the curr_ret_stack is used. Cc: stable@kernel.org Fixes: 03274a3f ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") Reviewed-by:
-
Steven Rostedt (VMware) authored
The function_graph_enter() function does the work of calling the function graph hook function and the management of the shadow stack, simplifying the work done in the architecture dependent prepare_ftrace_return(). Have sparc use the new code, and remove the shadow stack management as well as having to set up the trace structure. This is needed to prepare for a fix of a design bug on how the curr_ret_stack is used. Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: stable@kernel.org Fixes: 03274a3f ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") Reviewed-by:
-
Steven Rostedt (VMware) authored
The function_graph_enter() function does the work of calling the function graph hook function and the management of the shadow stack, simplifying the work done in the architecture dependent prepare_ftrace_return(). Have superh use the new code, and remove the shadow stack management as well as having to set up the trace structure. This is needed to prepare for a fix of a design bug on how the curr_ret_stack is used. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: linux-sh@vger.kernel.org Cc: stable@kernel.org Fixes: 03274a3f ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") Reviewed-by:
-
Steven Rostedt (VMware) authored
The function_graph_enter() function does the work of calling the function graph hook function and the management of the shadow stack, simplifying the work done in the architecture dependent prepare_ftrace_return(). Have s390 use the new code, and remove the shadow stack management as well as having to set up the trace structure. This is needed to prepare for a fix of a design bug on how the curr_ret_stack is used. Acked-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Julian Wiedmann <jwi@linux.ibm.com> Cc: linux-s390@vger.kernel.org Cc: stable@kernel.org Fixes: 03274a3f ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") Reviewed-by:
-
Steven Rostedt (VMware) authored
The function_graph_enter() function does the work of calling the function graph hook function and the management of the shadow stack, simplifying the work done in the architecture dependent prepare_ftrace_return(). Have riscv use the new code, and remove the shadow stack management as well as having to set up the trace structure. This is needed to prepare for a fix of a design bug on how the curr_ret_stack is used. Cc: Greentime Hu <greentime@andestech.com> Cc: Alan Kao <alankao@andestech.com> Cc: stable@kernel.org Fixes: 03274a3f ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") Reviewed-by:
Palmer Dabbelt <palmer@sifive.com> Reviewed-by:
-
Steven Rostedt (VMware) authored
The function_graph_enter() function does the work of calling the function graph hook function and the management of the shadow stack, simplifying the work done in the architecture dependent prepare_ftrace_return(). Have powerpc use the new code, and remove the shadow stack management as well as having to set up the trace structure. This is needed to prepare for a fix of a design bug on how the curr_ret_stack is used. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: stable@kernel.org Fixes: 03274a3f ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") Reviewed-by:
-
Steven Rostedt (VMware) authored
The function_graph_enter() function does the work of calling the function graph hook function and the management of the shadow stack, simplifying the work done in the architecture dependent prepare_ftrace_return(). Have parisc use the new code, and remove the shadow stack management as well as having to set up the trace structure. This is needed to prepare for a fix of a design bug on how the curr_ret_stack is used. Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Cc: stable@kernel.org Fixes: 03274a3f ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") Reviewed-by:
-
Steven Rostedt (VMware) authored
The function_graph_enter() function does the work of calling the function graph hook function and the management of the shadow stack, simplifying the work done in the architecture dependent prepare_ftrace_return(). Have nds32 use the new code, and remove the shadow stack management as well as having to set up the trace structure. This is needed to prepare for a fix of a design bug on how the curr_ret_stack is used. Cc: Greentime Hu <greentime@andestech.com> Cc: stable@kernel.org Fixes: 03274a3f ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") Reviewed-by:
-
Steven Rostedt (VMware) authored
The function_graph_enter() function does the work of calling the function graph hook function and the management of the shadow stack, simplifying the work done in the architecture dependent prepare_ftrace_return(). Have MIPS use the new code, and remove the shadow stack management as well as having to set up the trace structure. This is needed to prepare for a fix of a design bug on how the curr_ret_stack is used. Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: stable@kernel.org Fixes: 03274a3f ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") Reviewed-by:
-
