Required for DPM on CIK.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Calculate the low and high watermarks based on the low and high
clocks for the current power state.  The dynamic pm hw will select
the appropriate watermark based on the internal dpm state.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Newer asics don't have specific UVD states.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Newer asics have a lot of vram so it's less of an
issue to waste a little more space for the gart
page table.  This gives us some additional gart space
before having to migrate to non-gart system ram
for games, etc. where we use up most of vram.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1. Handle the the thermal state directly in the work handler.
Remove the state selection function since nothing else uses it now.
2. On some asics there is no thermal state, so we just use a regular
state and force the low performance state.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use the UVD handle information to determine which
which power states to select when using UVD.  For
example, decoding a single SD stream requires much
lower clocks than multiple HD streams.

v2: switch to a cleaner dpm/uvd interface
v3: change the uvd power state while streams
are active if need be
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add a helper function for counting the number of open stream handles.

v2: fix copy-pasta in comments and whitespace error
v3: make function static since it's only used in radeon_uvd.c
at the moment
v4: make non-static again for future changes
v5: make static again for new rework of dpm uvd changes
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

No longer used now that we use the async dma engines or
CP DMA for bo copies.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

CP DMA is lighter weight than using the 3D engine.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This LCD monitor (1280x1024 native) has a completely
bogus detailed timing (640x350@70hz).  User reports that
1280x1024@60 has waves so prefer 1280x1024@75.

Manufacturer: MED  Model: 7b8  Serial#: 99188
Year: 2005  Week: 5
EDID Version: 1.3
Analog Display Input,  Input Voltage Level: 0.700/0.700 V
Sync:  Separate
Max Image Size [cm]: horiz.: 34  vert.: 27
Gamma: 2.50
DPMS capabilities: Off; RGB/Color Display
First detailed timing is preferred mode
redX: 0.645 redY: 0.348   greenX: 0.280 greenY: 0.605
blueX: 0.142 blueY: 0.071   whiteX: 0.313 whiteY: 0.329
Supported established timings:
720x400@70Hz
640x480@60Hz
640x480@72Hz
640x480@75Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1280x1024@75Hz
Manufacturer's mask: 0
Supported standard timings:
Supported detailed timing:
clock: 25.2 MHz   Image Size:  337 x 270 mm
h_active: 640  h_sync: 688  h_sync_end 784 h_blank_end 800 h_border: 0
v_active: 350  v_sync: 350  v_sync_end 352 v_blanking: 449 v_border: 0
Monitor name: MD30217PG
Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
Serial No: 501099188
EDID (in hex):
          00ffffffffffff0034a4b80774830100
          050f010368221b962a0c55a559479b24
          125054afcf00310a0101010101018180
          000000000000d60980a0205e63103060
          0200510e1100001e000000fc004d4433
          3032313750470a202020000000fd0038
          4c1e530e000a202020202020000000ff
          003530313039393138380a2020200078
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: friedrich@mailstation.de
Cc: stable@vger.kernel.org

This fixes the piglit test texturing/max-texture-size
causing the VM to die due to a too large SVGA command.
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Biran Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@gmail.com>

Merge tag 'drm-intel-fixes-2013-08-30' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes

Just a one-line patch to fix a black screen issue on rare ivb machines,
cc: stable. Normally I'd just shovel this into the -next pull request this
late in the -rc cycle, but Linus was making noises about not getting real
fixes which are cc: stable. So here we go ;-)

* tag 'drm-intel-fixes-2013-08-30' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: ivb: fix edp voltage swing reg val

Fix the typo introduced in

commit 1a2eb460
Author: Keith Packard <keithp@keithp.com>
Date:   Wed Nov 16 16:26:07 2011 -0800

    drm/i915: Hook up Ivybridge eDP

This fixes eDP link-training failures and cases where all voltage swing
/pre-emphasis levels were tried and failed during clock recovery and -
as a fallback - we go on to do channel equalization with the last voltage
swing/pre-emphasis level which will succeed. Both issues can lead to a
blank screen.

v2:
- improve commit message

CC: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64880Tested-by: Jeremy Moles <cubicool@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Pull staging fixes from Greg KH:
 "Here are two tiny staging tree fixes (well, one is for an iio driver,
  but those updates come through the staging tree due to dependancies)

  One fixes a problem with an IIO driver, and the other fixes a bug in
  the comedi driver core"

* tag 'staging-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: bug-fix NULL pointer dereference on failed attach
  iio: adjd_s311: Fix non-scan mode data read

Pull USB fixes from Greg KH:
 "Here are two USB fixes for 3.11-rc7

  One fixes a reported regression in the OHCI driver, and the other
  fixes a reported build breakage in the USB phy drivers"

* tag 'usb-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: phy: fix build breakage
  USB: OHCI: add missing PCI PM callbacks to ohci-pci.c

Pull ARM fixes from Russell King:
 "This round of fixes is smaller than previous: a couple more updates
  for the security fixes, and a one-liner kexec fix"

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7816/1: CONFIG_KUSER_HELPERS: fix help text
  ARM: 7815/1: kexec: offline non panic CPUs on Kdump panic
  ARM: 7819/1: fiq: Cast the first argument of flush_icache_range()

Pull vfs fixes from Al Viro:
 "Assorted fixes from the last week or so"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  VFS: collect_mounts() should return an ERR_PTR
  bfs: iget_locked() doesn't return an ERR_PTR
  efs: iget_locked() doesn't return an ERR_PTR()
  proc: kill the extra proc_readfd_common()->dir_emit_dots()
  cope with potentially long ->d_dname() output for shmem/hugetlb

Pull ACPI fix from Rafael Wysocki:
 "I really hoped that it wouldn't be necessary to change anything in
  ACPI at this point, but it turns out that we need to revert one more
  ACPI video commit causing trouble.

  This reverts a change in the ACPI video driver that caused the ACPI
  backlight initialization to be carried out even if acpi_backlight=vendor
  is passed in the kernel command line which turns out to break things
  at least on one system"

* tag 'acpi-3.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI / video: Always call acpi_video_init_brightness() on init"

Pull SCSI fixes from James Bottomley:
 "This is a set of small bug fixes for lpfc and zfcp and a fix for a
  fairly nasty bug in sg where a process which cancels I/O completes in
  a kernel thread which would then try to write back to the now gone
  userspace and end up writing to a random kernel address instead"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] zfcp: remove access control tables interface (keep sysfs files)
  [SCSI] zfcp: fix schedule-inside-lock in scsi_device list loops
  [SCSI] zfcp: fix lock imbalance by reworking request queue locking
  [SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal
  [SCSI] lpfc: Don't force CONFIG_GENERIC_CSUM on

For a search buffer, 2 byte aligned, strchr() was returning pointer
outside of buffer (buf - 1)

------------->8----------------
    // Input buffer (default 4 byte aigned)
    char *buffer = "1AA_";

    // actual search start (to mimick 2 byte alignment)
    char *current_line = &(buffer[2]);

    // Character to search for
    char c = 'A';

    char *c_pos = strchr(current_line, c);

    printf("%s\n", c_pos) --> 'AA_' as oppose to 'A_'
------------->8----------------
Reported-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Debugged-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: <stable@vger.kernel.org> # [3.9 and 3.10]
Cc: Noam Camus <noamc@ezchip.com>
Signed-off-by: Joern Rennecke  <joern.rennecke@embecosm.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This should actually be returning an ERR_PTR on error instead of NULL.
That was how it was designed and all the callers expect it.

[AV: actually, that's what "VFS: Make clone_mnt()/copy_tree()/collect_mounts()
return errors" missed - originally collect_mounts() was expected to return
NULL on failure]

Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

iget_locked() returns a NULL on error, it doesn't return an ERR_PTR.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The iget_locked() function returns NULL on error and never an ERR_PTR.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

proc_readfd_common() does dir_emit_dots() twice in a row,
we need to do this only once.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dynamic_dname() is both too much and too little for those - the
output may be well in excess of 64 bytes dynamic_dname() assumes
to be enough (thanks to ashmem feeding really long names to
shmem_file_setup()) and vsnprintf() is an overkill for those
guys.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull libata fixes from Tejun Heo:
 "This contains three commits all of which are updates for specific
  devices which aren't too widespread.  Pretty limited scope and nothing
  too interesting or dangerous"

* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  sata_fsl: save irqs while coalescing
  libata: apply behavioral quirks to sil3826 PMP
  sata, highbank: fix ordering of SGPIO signals

Pull cgroup fix from Tejun Heo:
 "A late fix for cgroup.

  This fixes a behavior regression visible to userland which was created
  by a commit merged during -rc1.  While the behavior change isn't too
  likely to be noticeable, the fix is relatively low risk and we'll need
  to backport it through -stable anyway if the bug gets released"

* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: fix a regression in validating config change

Pull drm fixes from Dave Airlie:
 "Ben was on holidays for a week so a few nouveau regression fixes
  backed up, but they all seem necessary.

  Otherwise one i915 and one gma500 fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  gma500: Fix SDVO turning off randomly
  drm/nv04/disp: fix framebuffer pin refcounting
  drm/nouveau/mc: fix race condition between constructor and request_irq()
  drm/nouveau: fix reclocking on nv40
  drm/nouveau/ltcg: fix allocating memory as free
  drm/nouveau/ltcg: fix ltcg memory initialization after suspend
  drm/nouveau/fb: fix null derefs in nv49 and nv4e init
  drm/i915: Invalidate TLBs for the rings after a reset

Commit 94ae9843 (usb: phy: rename all phy drivers to phy-$name-usb.c)
renamed drivers/usb/phy/otg_fsm.h to drivers/usb/phy/phy-fsm-usb.h
but changed drivers/usb/phy/phy-fsm-usb.c to include not existing
"phy-otg-fsm.h" instead of new "phy-fsm-usb.h". This breaks building:
  ...
  drivers/usb/phy/phy-fsm-usb.c:32:25: fatal error: phy-otg-fsm.h: No such file or directory
  compilation terminated.
  make[3]: *** [drivers/usb/phy/phy-fsm-usb.o] Error 1

This commit also missed to modify drivers/usb/phy/phy-fsl-usb.h
to include new "phy-fsm-usb.h" instead of "otg_fsm.h" resulting
in another build breakage:
  ...
  In file included from drivers/usb/phy/phy-fsl-usb.c:46:0:
  drivers/usb/phy/phy-fsl-usb.h:18:21: fatal error: otg_fsm.h: No such file or directory
  compilation terminated.
  make[3]: *** [drivers/usb/phy/phy-fsl-usb.o] Error 1

Fix both issues.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: stable <stable@vger.kernel.org> # 3.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit c1117afb (USB: OHCI: make ohci-pci a separate driver)
neglected to preserve the entries for the pci_suspend and pci_resume
driver callbacks.  As a result, OHCI controllers don't work properly
during suspend and after hibernation.

This patch adds the missing callbacks to the driver.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Steve Cotton <steve@s.cotton.clara.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit dcd7b8bd ("staging: comedi: put
module _after_ detach" by myself) reversed a couple of calls in
`comedi_device_attach()` when recovering from an error returned by the
low-level driver's 'attach' handler.  Unfortunately, that introduced a
NULL pointer dereference bug as `dev->driver` is NULL after the call to
`comedi_device_detach()`.   We still have a pointer to the low-level
comedi driver structure in the `driv` variable, so use that instead.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge networking fixes from David Miller:

 1) Revert Johannes Berg's genetlink locking fix, because it causes
    regressions.

    Johannes and Pravin Shelar are working on fixing things properly.

 2) Do not drop ipv6 ICMP messages without a redirected header option,
    they are legal.  From Duan Jiong.

 3) Missing error return propagation in probing of via-ircc driver.
    From Alexey Khoroshilov.

 4) Do not clear out broadcast/multicast/unicast/WOL bits in r8169 when
    initializing, from Peter Wu.

 5) realtek phy driver programs wrong interrupt status bit, from
    Giuseppe CAVALLARO.

 6) Fix statistics regression in AF_PACKET code, from Willem de Bruijn.

 7) Bridge code uses wrong bitmap length, from Toshiaki Makita.

 8) SFC driver uses wrong indexes to look up MAC filters, from Ben
    Hutchings.

 9) Don't pass stack buffers into usb control operations in hso driver,
    from Daniel Gimpelevich.

10) Multiple ipv6 fragmentation headers in one packet is illegal and
    such packets should be dropped, from Hannes Frederic Sowa.

11) When TCP sockets are "repaired" as part of checkpoint/restart, the
    timestamp field of SKBs need to be refreshed otherwise RTOs can be
    wildly off.  From Andrey Vagin.

12) Fix memcpy args (uses 'address of pointer' instead of 'pointer') in
    hostp driver.  From Dan Carpenter.

13) nl80211hdr_put() doesn't return an ERR_PTR, but some code believes
    it does.  From Dan Carpenter.

14) Fix regression in wireless SME disconnects, from Johannes Berg.

15) Don't use a stack buffer for DMA in zd1201 USB wireless driver, from
    Jussi Kivilinna.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
  ipv4: expose IPV4_DEVCONF
  ipv6: handle Redirect ICMP Message with no Redirected Header option
  be2net: fix disabling TX in be_close()
  Revert "genetlink: fix family dump race"
  hso: Fix stack corruption on some architectures
  hso: Earlier catch of error condition
  sfc: Fix lookup of default RX MAC filters when steered using ethtool
  bridge: Use the correct bit length for bitmap functions in the VLAN code
  packet: restore packet statistics tp_packets to include drops
  net: phy: rtl8211: fix interrupt on status link change
  r8169: remember WOL preferences on driver load
  via-ircc: don't return zero if via_ircc_open() failed
  macvtap: Ignore tap features when VNET_HDR is off
  macvtap: Correctly set tap features when IFF_VNET_HDR is disabled.
  macvtap: simplify usage of tap_features
  tcp: set timestamps for restored skb-s
  bnx2x: set VF DMAE when first function has 0 supported VFs
  bnx2x: Protect against VFs' ndos when SR-IOV is disabled
  bnx2x: prevent VF benign attentions
  bnx2x: Consider DCBX remote error
  ...

Merge fixes from Andrew Morton:
 "A few fixes.  One is a licensing change and I don't do licensing, so
  please eyeball that one"

Licensing eye-balled.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  lib/lz4: correct the LZ4 license
  memcg: get rid of swapaccount leftovers
  nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection
  nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error
  drivers/platform/olpc/olpc-ec.c: initialise earlier

The LZ4 code is listed as using the "BSD 2-Clause License".
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Acked-by: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: Chanho Min <chanho.min@lge.com>
Cc: Richard Yao <ryao@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ The 2-clause BSD can be just converted into GPL, but that's rude and
  pointless, so don't do it   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The swapaccount kernel parameter without any values has been removed by
commit a2c8990a ("memsw: remove noswapaccount kernel parameter") but
it seems that we didn't get rid of all the left overs.

Make sure that menuconfig help text and kernel-parameters.txt are clear
about value for the paramter and remove the stalled comment which is not
very much useful on its own.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Gergely Risko <gergely@risko.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the issue with improper counting number of flying bio requests for
BIO_EOPNOTSUPP error detection case.

The sb_nbio must be incremented exactly the same number of times as
complete() function was called (or will be called) because
nilfs_segbuf_wait() will call wail_for_completion() for the number of
times set to sb_nbio:

  do {
      wait_for_completion(&segbuf->sb_bio_event);
  } while (--segbuf->sb_nbio > 0);

Two functions complete() and wait_for_completion() must be called the
same number of times for the same sb_bio_event.  Otherwise,
wait_for_completion() will hang or leak.
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove double call of bio_put() in nilfs_end_bio_write() for the case of
BIO_EOPNOTSUPP error detection.  The issue was found by Dan Carpenter
and he suggests first version of the fix too.
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Being a low-level component, various drivers (e.g.  olpc-battery) assume
that it is ok to communicate with the OLPC Embedded Controller during
probe.  Therefore the OLPC EC driver must be initialised before other
drivers try to use it.  This was the case until it was recently moved
out of arch/x86 and restructured around commits ac250415 ("Platform:
OLPC: turn EC driver into a platform_driver") and 85f90cf6 ("x86:
OLPC: switch over to using new EC driver on x86").

Use arch_initcall so that olpc-ec is readied earlier, matching the
previous behaviour.

Fixes a regression introduced in Linux-3.6 where various drivers such as
olpc-battery and olpc-xo1-sci failed to load due to an inability to
communicate with the EC.  The user-visible effect was a lack of battery
monitoring, missing ebook/lid switch input devices, etc.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Cc: Andres Salomon <dilinger@queued.net>
Cc: Paul Fox <pgf@laptop.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'drm-intel-fixes-2013-08-23' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes

Just one patch that soaked for quite a bit to fix a resume issue,
resulting in gpu hangs (or worse) due to tlb containing garbage.

* tag 'drm-intel-fixes-2013-08-23' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Invalidate TLBs for the rings after a reset