- 12 Aug, 2013 32 commits
-
-
Thomas Pugliese authored
Prevent the USB core from suspending the HWA root hub since bus_suspend and bus_resume are not yet supported. Otherwise the PM system will chew up CPU time constantly attempting to suspend and resume the root hub but never succeeding. Signed-off-by:
Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Pugliese authored
This patch fixes a kernel panic that can occur when unplugging the HWA dongle while a downstream device is in the process of disconnecting. This involved 2 changes. First, call usb_lock_device_for_reset before usb_reset_device to synchronize the HWA's post_rest and disconnect routines. Second, set the hwarc->neep_urb and hwarc->rd_buffer to NULL when they are freed in the error path in the post_reset routine. This prevents a double free when the disconnect routine is called and attempts to free those resources again. Signed-off-by:
-
Oliver Neukum authored
Both could want to submit the same URB. Some checks of the flag intended to prevent that were missing. Signed-off-by:
Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by:
-
Thomas Pugliese authored
wa_urb_enqueue_run locks and unlocks its list lock as it traverses the list of queued transfers. This was done to prevent deadlocking due to acquiring locks in reverse order in different places. The problem is that releasing the lock during the list traversal could allow the dequeue routine to corrupt the list while it is being iterated over. This patch moves all list entries to a temp list while holding the list lock, then traverses the temp list with no lock held. Signed-off-by:
-
Thomas Pugliese authored
The hub_status_data function on the wireless USB root hub controller (wusbhc_rh_status_data) always returns a positive value even if no ports have changed. This patch updates wusbhc_rh_status_data to only return a positive value if the root hub status needs to be queried. The current implementation can also leave the upper bits of the port bitmap uninitialized if wusbhc->ports_max is not one less than an even multiple of 8. This patch fixes that as well by initializing the buffer to 0. Signed-off-by:
-
Manu Gautam authored
The USB Embedded High-speed Host Electrical Test (EHSET) defines the SINGLE_STEP_SET_FEATURE test as follows: 1) The host enumerates the test device with VID:0x1A0A, PID:0x0108 2) The host sends the SETUP stage of a GetDescriptor(Device) 3) The device ACKs the request 4) The host issues SOFs for 15 seconds allowing the test operator to raise the scope trigger just above the SOF voltage level 5) The host sends the IN packet 6) The device sends data in response, triggering the scope 7) The host sends an ACK in response to the data This patch adds additional handling to the EHCI hub driver and allows the EHSET driver to initiate this test mode by issuing a a SetFeature request to the root hub with a Test Selector value of 0x06. From there it mimics ehci_urb_enqueue() but separately submits QTDs for the SETUP and DATA/STATUS stages in order to insert a delay in between. Signed-off-by:
Manu Gautam <mgautam@codeaurora.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> [jackp@codeaurora.org: imported from commit c2084930 on codeaurora.org; minor cleanup and updated author email] Signed-off-by:
Jack Pham <jackp@codeaurora.org> Signed-off-by:
-
Mark Brown authored
If someone provided meaningful error codes from reset() we should tell the user what they were. Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Hans de Goede authored
Correct use of devnum in supports_autosuspend documentation, the sysfs path contains busnum-port.port.port not busnum-devnum (which is the usb bus device address). Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
The config descriptors as read from /proc/bus/usb/BBB/DDD are in *bus* endian format. Correct proc_usb_info.txt to correctly reflect that. Signed-off-by:
-
Hans de Goede authored
While reading the config parsing code I noticed this check is missing, without this check config->desc.wTotalLength can end up with a value larger then the dev->rawdescriptors length for the config, and when userspace then tries to get the rawdescriptors bad things may happen. Signed-off-by:
-
Mark Brown authored
Refactor so that register writes for configuration are only performed if the device has a regmap provided and also register as a platform driver. This allows the driver to be used to manage GPIO based control of the device. Signed-off-by:
Dongjin Kim <tobetter@gmail.com> Signed-off-by:
-
Mark Brown authored
The binding document says that all properties are required but in fact almost all are optional (and should be) - update the document to reflect this. Signed-off-by:
-
Mark Brown authored
There are no software visible differences that I am aware of but in case any are discovered allow the DTS to specify exactly which device is present. Signed-off-by:
-
Mark Brown authored
Since there is no runtime interface for changing modes this is probably the most sensible default. Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
In preparation for supporting operation without an I2C control interface factor out the I2C-specific parts of the probe routine from those that don't do any register I/O. Signed-off-by:
-
Mark Brown authored
This will give access to the diagnostic infrastructure regmap has but the main point is to support future refactoring. Signed-off-by:
-
Mark Brown authored
If the connect signal is pulled high then the device will start up meaning that if we just pull it high on probe then the device will start running prior to the configuration being written out. Fix this by pulling the GPIO low when we reset and only pulling it high when configuration is finished. Signed-off-by:
-
Mark Brown authored
The /RESET GPIO is not manipulated from atomic context so support GPIOs that can't be written from atomic context by using _cansleep(). Signed-off-by: -
David Daney authored
When CONFIG_USB_SUPPORT is not selected we get things like: scripts/kconfig/mconf Kconfig warning: (MIPS_SEAD3 && PMC_MSP && CPU_CAVIUM_OCTEON) selects USB_EHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB) It is much cleaner to make the various system Kconfigs select USB_EHCI_BIG_ENDIAN_MMIO rather than move the system config information into USB's Kconfig, but the warnings are annoying. Eliminate the warning by moving the definition of USB_EHCI_BIG_ENDIAN_MMIO outside of all the Kconfig if statements. While we are at it move USB_OHCI_BIG_ENDIAN_DESC, USB_OHCI_BIG_ENDIAN_MMIO, USB_OHCI_LITTLE_ENDIAN and USB_EHCI_BIG_ENDIAN_DESC too, as they could very well suffer similar problems for other systems. Get rid of the redundant "default n" in USB_OHCI_BIG_ENDIAN_DESC and USB_OHCI_BIG_ENDIAN_MMIO Signed-off-by:
David Daney <david.daney@cavium.com> Acked-by:
-
Mark Brown authored
Saves us a bit of code. Signed-off-by:
-
Mark Brown authored
The intn and connect GPIO properties are swapped in the code which will cause failures at runtime if these are connected, fix the code. There are currently no in-tree users of this device to check or update. Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Greg Kroah-Hartman authored
Instead of having to create a new driver for a "simple" usb to serial device, mush them all into one file, with a macro, so as to make it easy to add new ones. Cc: "René Bürgel" <rene.buergel@sohard.de> Acked-by:
Wei Shuai <cpuwolf@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Acked-by:
Frans Klaver <frans.klaver@xsens.com> Cc: "Wesley W. Terpstra" <w.terpstra@gsi.de> Cc: Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Ming Lei authored
This patch enables 'can_dma_sg' flag for ax88179_178a device if the attached host controller supports building packet from discontinuous buffers(DMA SG is possible), so TSO can be enabled and skb fragment buffers can be passed to usb stack via urb->sg directly. With the patch, system CPU utilization decreased ~50% and throughput increased by ~10% when doing iperf client test on one ARM A15 dual core board. Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Grant Grundler <grundler@google.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Freddy Xin <freddy@asix.com.tw> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Acked-by:
Eric Dumazet <edumazet@gmail.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ming Lei authored
This patch introduces support of DMA SG if the USB host controller which usbnet device is attached to is capable of building packet from discontinuous buffers. The patch supports passing the skb fragment buffers to usb stack directly via urb->sg. Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Grant Grundler <grundler@google.com> Cc: Freddy Xin <freddy@asix.com.tw> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
-
Ming Lei authored
This patch marks all xHCI controllers as no_sg_constraint since xHCI supports building packet from discontinuous buffers. Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Ming Lei authored
Some host controllers(such as xHCI) can support building packet from discontinuous buffers, so introduce one flag and helper for this kind of host controllers, then the feature can help some applications(such as usbnet) by supporting arbitrary length of sg buffers. Acked-by:
-
Ming Lei authored
All 4 transfer types can work well on EHCI HCD after switching to run URB giveback in tasklet context, so mark all HCD drivers to support it. Also we don't need to release ehci->lock during URB giveback any more. >From below test results on 3 machines(2 ARM and one x86), time consumed by EHCI interrupt handler droped much without performance loss. 1 test description 1.1 mass storage performance test: - run below command 10 times and compute the average performance dd if=/dev/sdN iflag=direct of=/dev/null bs=200M count=1 - two usb mass storage device: A: sandisk extreme USB 3.0 16G(used in test case 1 & case 2) B: kingston DataTraveler G2 4GB(only used in test case 2) 1.2 uvc function test: - run one simple capture program in the below link http://kernel.ubuntu.com/~ming/up/capture.c - capture format 640*480 and results in High Bandwidth mode on the uvc device: Z-Star 0x0ac8/0x3450 - on T410(x86) laptop, also use guvcview to watch video capture/playback 1.3 about test2 and test4 - both two devices involved are tested concurrently by above test items 1.4 how to compute irq time(the time consumed by ehci_irq) - use trace points of irq:irq_handler_entry and irq:irq_handler_exit 1.5 kernel 3.10.0-rc3-next-20130528 1.6 test machines Pandaboard A1: ARM CortexA9 dural core Arndale board: ARM CortexA15 dural core T410: i5 CPU 2.67GHz quad core 2 test result 2.1 test case1: single mass storage device performance test -------------------------------------------------------------------- upstream | patched perf(MB/s)+irq time(us) | perf(MB/s)+irq time(us) -------------------------------------------------------------------- Pandaboard A1: 25.280(avg:145,max:772) | 25.540(avg:14, max:75) Arndale board: 29.700(avg:33, max:129) | 29.700(avg:10, max:50) T410: 34.430(avg:17, max:154*)| 34.660(avg:12, max:155) --------------------------------------------------------------------- 2.2 test case2: two mass storage devices' performance test -------------------------------------------------------------------- upstream | patched perf(MB/s)+irq time(us) | perf(MB/s)+irq time(us) -------------------------------------------------------------------- Pandaboard A1: 15.840/15.580(avg:158,max:1216) | 16.500/16.160(avg:15,max:139) Arndale board: 17.370/16.220(avg:33 max:234) | 17.480/16.200(avg:11, max:91) T410: 21.180/19.820(avg:18 max:160) | 21.220/19.880(avg:11, max:149) --------------------------------------------------------------------- 2.3 test case3: one uvc streaming test - uvc device works well(on x86, luvcview can be used too and has same result with uvc capture) -------------------------------------------------------------------- upstream | patched irq time(us) | irq time(us) -------------------------------------------------------------------- Pandaboard A1: (avg:445, max:873) | (avg:33, max:44) Arndale board: (avg:316, max:630) | (avg:20, max:27) T410: (avg:39, max:107) | (avg:10, max:65) --------------------------------------------------------------------- 2.4 test case4: one uvc streaming plus one mass storage device test -------------------------------------------------------------------- upstream | patched perf(MB/s)+irq time(us) | perf(MB/s)+irq time(us) -------------------------------------------------------------------- Pandaboard A1: 20.340(avg:259,max:1704)| 20.390(avg:24, max:101) Arndale board: 23.460(avg:124,max:726) | 23.370(avg:15, max:52) T410: 28.520(avg:27, max:169) | 28.630(avg:13, max:160) --------------------------------------------------------------------- 2.5 test case5: read single mass storage device with small transfer - run below command 10 times and compute the average speed dd if=/dev/sdN iflag=direct of=/dev/null bs=4K count=4000 1), test device A: -------------------------------------------------------------------- upstream | patched perf(MB/s)+irq time(us) | perf(MB/s)+irq time(us) -------------------------------------------------------------------- Pandaboard A1: 6.5(avg:21, max:64) | 6.5(avg:10, max:24) Arndale board: 8.13(avg:12, max:23) | 8.06(avg:7, max:17) T410: 6.66(avg:13, max:131) | 6.84(avg:11, max:149) --------------------------------------------------------------------- 2), test device B: -------------------------------------------------------------------- upstream | patched perf(MB/s)+irq time(us) | perf(MB/s)+irq time(us) -------------------------------------------------------------------- Pandaboard A1: 5.5(avg:21,max:43) | 5.49(avg:10, max:24) Arndale board: 5.9(avg:12, max:22) | 5.9(avg:7, max:17) T410: 5.48(avg:13, max:155) | 5.48(avg:7, max:140) --------------------------------------------------------------------- * On T410, sometimes read ehci status register in ehci_irq takes more than 100us, and the problem has been reported on the link: http://marc.info/?t=137065867300001&r=1&w=2Acked-by: -
Ming Lei authored
ehci-hcd currently unlinks an interrupt QH when it becomes empty, that is, after its last URB completes. This works well because in almost all cases, the completion handler for an interrupt URB resubmits the URB; therefore the QH doesn't become empty and doesn't get unlinked. When we start using tasklets for URB completion, this scheme won't work as well. The resubmission won't occur until the tasklet runs, which will be some time after the completion is queued with the tasklet. During that delay, the QH will be empty and so will be unlinked unnecessarily. To prevent this problem, this patch adds a 5-ms time delay before empty interrupt QHs are unlinked. Most often, during that time the interrupt URB will be resubmitted and thus we can avoid unlinking the QH. Signed-off-by:
-
Ming Lei authored
The patch does the below improvement: - think QH_STATE_COMPLETING as unlinking state since all URBs on the endpoint should be in unlinking or unlinked when doing endpoint_disable() - add "WARN_ON(!list_empty(&qh->qtd_list));" if qh->qh_state is QH_STATE_LINKED because there shouldn't be any active transfer in qh - when qh->qh_state is QH_STATE_LINKED, the QH(async or periodic) should be in its corresponding list, so the search through the async list isn't necessary. - unlink periodic QH to speed up unlinking if the QH is in linked state Basically, only the last one is related with this patchset because the assumption of "periodic qh self-unlinks on empty" isn't true any more when we introduce unlink-wait for periodic qh. Acked-by:
-
Ming Lei authored
There is no good reason to run complete() in hard interrupt disabled context. After switch to run complete() in tasklet, we will enable local IRQs when calling complete() since we can do it at that time. Even though we still disable IRQs now when calling complete() in tasklet, the URB documentation is updated to claim complete() will be run in tasklet context and local IRQs will be enabled, so that USB drivers can know the change and avoid one deadlock caused by: assume IRQs disabled in complete() and call spin_lock() to hold lock which might be acquired in interrupt context. Current spin_lock() usages in drivers' complete() will be cleaned up at the same time, and once the cleanup is finished, local IRQs will be enabled when calling complete() in tasklet. Also fix description about type of usb_complete_t, and remove the advice of running completion handler in tasklet for decreasing system latency. Cc: Oliver Neukum <oliver@neukum.org> Acked-by:
-
Ming Lei authored
This patch implements the mechanism of giveback of URB in tasklet context, so that hardware interrupt handling time for usb host controller can be saved much, and HCD interrupt handling can be simplified. Motivations: 1), on some arch(such as ARM), DMA mapping/unmapping is a bit time-consuming, for example: when accessing usb mass storage via EHCI on pandaboard, the common length of transfer buffer is 120KB, the time consumed on DMA unmapping may reach hundreds of microseconds; even on A15 based box, the time is still about scores of microseconds 2), on some arch, reading DMA coherent memoery is very time-consuming, the most common example is usb video class driver[1] 3), driver's complete() callback may do much things which is driver specific, so the time is consumed unnecessarily in hardware irq context. 4), running driver's complete() callback in hardware irq context causes that host controller driver has to release its lock in interrupt handler, so reacquiring the lock after return may busy wait a while and increase interrupt handling time. More seriously, releasing the HCD lock makes HCD becoming quite complicated to deal with introduced races. So the patch proposes to run giveback of URB in tasklet context, then time consumed in HCD irq handling doesn't depend on drivers' complete and DMA mapping/unmapping any more, also we can simplify HCD since the HCD lock isn't needed to be released during irq handling. The patch should be reasonable and doable: 1), for drivers, they don't care if the complete() is called in hard irq context or softirq context 2), the biggest change is the situation in which usb_submit_urb() is called in complete() callback, so the introduced tasklet schedule delay might be a con, but it shouldn't be a big deal: - control/bulk asynchronous transfer isn't sensitive to schedule delay - the patch schedules giveback of periodic URBs using tasklet_hi_schedule, so the introduced delay should be very small - for ISOC transfer, generally, drivers submit several URBs concurrently to avoid interrupt delay, so it is OK with the little schedule delay. - for interrupt transfer, generally, drivers only submit one URB at the same time, but interrupt transfer is often used in event report, polling, ... situations, and a little delay should be OK. Considered that HCDs may optimize on submitting URB in complete(), the patch may cause the optimization not working, so introduces one flag to mark if the HCD supports to run giveback URB in tasklet context. When all HCDs are ready, the flag can be removed. [1], http://marc.info/?t=136438111600010&r=1&w=2 Cc: Oliver Neukum <oliver@neukum.org> Acked-by:
-
- 05 Aug, 2013 1 commit
-
-
Greg Kroah-Hartman authored
We want those fixes in here also. Signed-off-by:
-
- 04 Aug, 2013 6 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "Two fixes for slave dmaengine. The first fixes cyclic dma transfers for pl330 and the second one makes us return the correct error code on probe" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: pl330: Fix cyclic transfers pch_dma: fix error return code in pch_dma_probe()
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fix from Dave Airlie: "Just a quick fix that a few people have reported, be nice to have in asap" The drm tree seems to be very confused about 64-bit divides. Here it uses a slow 64-by-64 bit divide to divide by a small constant. Oh well. Doesn't look performance-critical, just stupid. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: fix 64 bit divide in SI spm code
-
Hugh Dickins authored
Commit 46a1c2c7 ("vfs: export lseek_execute() to modules") broke the tmpfs SEEK_DATA/SEEK_HOLE implementation, because vfs_setpos() converts the carefully prepared -ENXIO to -EINVAL. Other filesystems avoid it in error cases: do the same in tmpfs. Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "All small regression or small fixes, nothing surprising at this stage. - regression fix for intel Mac Mini quirk - compress ioctl error fix - ASoC fixes for control change notifications, some UI fixes, driver-specific fixes (resource leak, build errors, etc)" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix missing fixup for Mac Mini with STAC9221 ASoC: wm0010: Fix resource leak ASoC: au1x: Fix build ASoC: bf5xx-ac97: Fix compile error with SND_BF5XX_HAVE_COLD_RESET ASoC: bfin-ac97: Fix prototype error following AC'97 refactoring ALSA: compress: fix the return value for SNDRV_COMPRESS_VERSION ASoC: dapm: Fix return value of snd_soc_dapm_put_{volsw,enum_virt}() -
Alex Deucher authored
Forgot to use the appropriate math64 function. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@gmail.com>
-
- 03 Aug, 2013 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't ignore user initiated wireless regulatory settings on cards with custom regulatory domains, from Arik Nemtsov. 2) Fix length check of bluetooth information responses, from Jaganath Kanakkassery. 3) Fix misuse of PTR_ERR in btusb, from Adam Lee. 4) Handle rfkill properly while iwlwifi devices are offline, from Emmanuel Grumbach. 5) Fix r815x devices DMA'ing to stack buffers, from Hayes Wang. 6) Kernel info leak in ATM packet scheduler, from Dan Carpenter. 7) 8139cp doesn't check for DMA mapping errors, from Neil Horman. 8) Fix bridge multicast code to not snoop when no querier exists, otherwise mutlicast traffic is lost. From Linus Lüssing. 9) Avoid soft lockups in fib6_run_gc(), from Michal Kubecek. 10) Fix races in automatic address asignment on ipv6, which can result in incorrect lifetime assignments. From Jiri Benc. 11) Cure build bustage when CONFIG_NET_LL_RX_POLL is not set and rename it CONFIG_NET_RX_BUSY_POLL to eliminate the last reference to the original naming of this feature. From Cong Wang. 12) Fix crash in TIPC when server socket creation fails, from Ying Xue. 13) macvlan_changelink() silently succeeds when it shouldn't, from Michael S Tsirkin. 14) HTB packet scheduler can crash due to sign extension, fix from Stephen Hemminger. 15) With the cable unplugged, r8169 prints out a message every 10 seconds, make it netif_dbg() instead of netif_warn(). From Peter Wu. 16) Fix memory leak in rtm_to_ifaddr(), from Daniel Borkmann. 17) sis900 gets spurious TX queue timeouts due to mismanagement of link carrier state, from Denis Kirjanov. 18) Validate somaxconn sysctl to make sure it fits inside of a u16. From Roman Gushchin. 19) Fix MAC address filtering on qlcnic, from Shahed Shaikh. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (68 commits) qlcnic: Fix for flash update failure on 83xx adapter qlcnic: Fix link speed and duplex display for 83xx adapter qlcnic: Fix link speed display for 82xx adapter qlcnic: Fix external loopback test. qlcnic: Removed adapter series name from warning messages. qlcnic: Free up memory in error path. qlcnic: Fix ingress MAC learning qlcnic: Fix MAC address filter issue on 82xx adapter net: ethernet: davinci_emac: drop IRQF_DISABLED netlabel: use domain based selectors when address based selectors are not available net: check net.core.somaxconn sysctl values sis900: Fix the tx queue timeout issue net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing fails r8169: remove "PHY reset until link up" log spam net: ethernet: cpsw: drop IRQF_DISABLED htb: fix sign extension bug macvlan: handle set_promiscuity failures macvlan: better mode validation tipc: fix oops when creating server socket fails net: rename CONFIG_NET_LL_RX_POLL to CONFIG_NET_RX_BUSY_POLL ...
-
