Merge tag 'memory-controller-drv-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers

Memory controller drivers for v5.10, part two

1. Add support for MT8167 to Mediatek SMI.
2. Compile test fix (omap-gpmc) and duplicate code (tegra).
3. Simplify code with DEFINE_SHOW_ATTRIBUTE.

* tag 'memory-controller-drv-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
  memory: emif: Convert to DEFINE_SHOW_ATTRIBUTE
  memory: tegra: Convert to DEFINE_SHOW_ATTRIBUTE
  memory: omap-gpmc: Fix compile test on SPARC
  memory: mtk-smi: add support for MT8167
  dt-bindings: memory: mediatek: Add binding for MT8167 SMI
  memory: tegra: Delete duplicated argument to '|' in function tegra210_emc_r21021_periodic_compensation

Link: https://lore.kernel.org/r/20200925152523.14608-1-krzk@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Reset controller updates for v5.10

This tag allows to build reset-imx7 as a module, and adds support to
reset the Cortex-M4 processor on i.MX8MQ to it, adds support for the
Versal platform to the reset-zynqmp driver, and fixes some kerneldoc
comments in the core and in sti/reset-syscfg.

* tag 'reset-for-v5.10' of git://git.pengutronix.de/pza/linux:
  reset: sti: reset-syscfg: fix struct description warnings
  reset: imx7: add the cm4 reset for i.MX8MQ
  dt-bindings: reset: imx8mq: add m4 reset
  reset: Fix and extend kerneldoc
  reset: reset-zynqmp: Added support for Versal platform
  dt-bindings: reset: Updated binding for Versal reset driver
  reset: imx7: Support module build

Link: https://lore.kernel.org/r/2b77c90d2b970eb8fa09000b9ecb564bffa76374.camel@pengutronix.deSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers

soc: amlogic: driver updates for v5.10
- misc. pm-domain updates

* tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  soc: amlogic: pm-domains: use always-on flag
  soc: amlogic: meson-ee-pwrc: add support for the Meson AXG SoCs
  dt-bindings: power: amlogic, meson-ee-pwrc: add Amlogic AXG power controller bindings

Link: https://lore.kernel.org/r/7hblhukjzx.fsf@baylibre.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-drivers-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm driver updates for v5.10

Replace the busy wait for free tcs slots in the RPMh driver with a
sleeping wait and use memory barriers when writing the command registers.

Add a bunch of SoC ids to the socinfo driver, fix an erro printin the
apr driver and migrate llcc to devm_platform_ioremap_resource_byname().

* tag 'qcom-drivers-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  soc: qcom: llcc: use devm_platform_ioremap_resource_byname()
  soc: qcom: apr: Fixup the error displayed on lookup failure
  soc: qcom: socinfo: Add msm8992/4 and apq8094 SoC IDs
  soc: qcom: rpmh-rsc: Sleep waiting for tcs slots to be free
  soc: qcom-geni-se: Don't use relaxed writes when writing commands
  soc: qcom: socinfo: add SC7180 entry to soc_id array
  soc: qcom: socinfo: add soc id for IPQ6018

Link: https://lore.kernel.org/r/20200924040504.179708-1-bjorn.andersson@linaro.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'soc-fsl-next-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers

NXP/FSL SoC driver updates for v5.10

Fix various compile warnings and static analysis warnings for:
- QBMan driver
- DPIO driver
- QE driver

* tag 'soc-fsl-next-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
  soc: fsl: qman: convert to use be32_add_cpu()
  soc: fsl: dpio: remove set but not used 'addr_cena'
  soc: fsl: qbman: Fix return value on success
  soc: fsl: qman: fix -Wpacked-not-aligned warnings

Link: https://lore.kernel.org/r/20200923224416.25788-1-leoyang.li@nxp.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-drivers-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

i.MX drivers update for 5.10:

- Use dev_err_probe() to simplify error handling for i.MX GPCv2 driver.
- Add a check in i.MX SCU power domain driver to ignore the power
  domains that are not owned by the current partition.

* tag 'imx-drivers-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  firmware: imx: scu-pd: ignore power domain not owned
  soc: imx: gpcv2: Use dev_err_probe() to simplify error handling

Link: https://lore.kernel.org/r/20200923073009.23678-1-shawnguo@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-drivers-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers

One small style fix for the Allwinner SRAM driver

* tag 'sunxi-drivers-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  soc: sunxi: sram: remove unneeded semicolon

Link: https://lore.kernel.org/r/175d36ad-bc98-4d5d-b035-ce467e932248.lettre@localhostSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'drivers_soc_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers

ARM: soc: TI driver updates for v5.10

Consist of:
 - Add Ring accelerator support for AM65x
 - Add TI PRUSS platform driver and enable it on available platforms
 - Extend PRUSS driver for CORECLK_MUX/IEPCLK_MUX support
 - UDMA rx ring pair fix
 - Add socinfo entry for J7200

* tag 'drivers_soc_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  Add missing '#' to fix schema errors:
  soc: ti: Convert to DEFINE_SHOW_ATTRIBUTE
  dmaengine: ti: k3-udma-glue: Fix parameters for rx ring pair request
  soc: ti: k3-socinfo: Add entry for J7200
  soc: ti: pruss: support CORECLK_MUX and IEPCLK_MUX
  dt-bindings: soc: ti: Update TI PRUSS bindings regarding clock-muxes
  firmware: ti_sci: allow frequency change for disabled clocks by default
  soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one
  soc: ti: pruss: Enable support for ICSSG subsystems on K3 J721E SoCs
  soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM65x SoCs
  soc: ti: pruss: Add support for PRU-ICSS subsystems on 66AK2G SoC
  soc: ti: pruss: Add support for PRU-ICSS subsystems on AM57xx SoCs
  soc: ti: pruss: Add support for PRU-ICSSs on AM437x SoCs
  soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs
  dt-bindings: soc: ti: Add TI PRUSS bindings
  bindings: soc: ti: soc: ringacc: remove ti,dma-ring-reset-quirk
  soc: ti: k3: ringacc: add am65x sr2.0 support

Link: https://lore.kernel.org/r/1600656828-29267-1-git-send-email-santosh.shilimkar@oracle.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.10-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

firmware: tegra: Changes for v5.10-rc1

This is a minor change that implements a BPMP workaround for pre-silicon
platforms and is needed to enable support for BPMP on Tegra234.

* tag 'tegra-for-5.10-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  firmware: tegra: Enable BPMP support on Tegra234

Link: https://lore.kernel.org/r/20200918150303.3938852-3-thierry.reding@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

soc/tegra: Changes for v5.10-rc1

These changes contain a bit of cleanup and chip support for the upcoming
Tegra234 SoC.

* tag 'tegra-for-5.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: pmc: Add Tegra234 support
  soc/tegra: pmc: Reorder reset sources/levels definitions
  soc/tegra: misc: Add Tegra234 support
  soc/tegra: fuse: Add Tegra234 support
  soc/tegra: fuse: Implement tegra_is_silicon()
  soc/tegra: fuse: Extract tegra_get_platform()

Link: https://lore.kernel.org/r/20200918150303.3938852-2-thierry.reding@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tee-dev-cleanup-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers

Simplify tee_device_register() and friends

Uses cdev_device_add() instead of the cdev_add() device_add()
combination.

Initializes dev->groups instead of direct calls to sysfs_create_group()
and friends.

* tag 'tee-dev-cleanup-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
  tee: avoid explicit sysfs_create/delete_group by initialising dev->groups
  tee: replace cdev_add + device_add with cdev_device_add

Link: https://lore.kernel.org/r/20200918144130.GB1219771@jadeSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-drivers-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers

Renesas driver updates for v5.10 (take two)

  - Add core support for the R-Car V3U (R8A779A0) SoC, including System
    Controller (SYSC) and Reset (RST) support,
  - Various Kconfig cleanups.

* tag 'renesas-drivers-for-v5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  soc: renesas: r8a779a0-sysc: Add r8a779a0 support
  soc: renesas: rcar-rst: Add support for R-Car V3U
  soc: renesas: Identify R-Car V3U
  soc: renesas: Sort driver description title
  soc: renesas: Use ARM32/ARM64 for menu description
  dt-bindings: clock: Add r8a779a0 CPG Core Clock Definitions
  dt-bindings: power: Add r8a779a0 SYSC power domain definitions

Link: https://lore.kernel.org/r/20200918124800.15555-4-geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

Rather than use a governor to keep these domains always-on, instead
use the flag GENPD_FLAG_ALWAYS_ON.  This has the same effect, but with
much lower overhead since the governor path is not used at all.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200921222135.7145-1-khilman@baylibre.com

Fix formating of struct description to avoid warning highlighted
by W=1 compilation.

Fixes: e5d76075 ("drivers: reset: STi SoC system configuration reset controller support")
Signed-off-by: Alain Volmat <avolmat@me.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Add the cm4 reset used by the remoteproc driver
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Add the m4 reset used by the remoteproc driver
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Fix W=1 compile warnings (invalid kerneldoc):

    drivers/reset/core.c:50: warning: Function parameter or member 'array' not described in 'reset_control'
    drivers/reset/core.c:50: warning: Function parameter or member 'deassert_count' not described in 'reset_control'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Updated the reset driver to support Versal platform.
As part of adding Versal support
- Added Versal specific compatible string.
- Reset Id and number of resets are different for Versal and ZynqMP,
hence taken care of these two based on compatible string.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Added documentation and Versal reset indices to describe
about Versal reset driver bindings.
In Versal all reset indices includes Class, SubClass, Type, Index
information whereas class refers to clock, reset, power etc.,
Underlying firmware in Versal have such classification and expects
the ID to be this way.
[13:0] - Index bits
[19:14] - Type bits
[25:20] - SubClass bits
[31:26] - Class bits.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Use module_platform_driver(), add module device table, author,
description and license to support module build, and
CONFIG_RESET_IMX7 is changed to default 'y' ONLY for i.MX7D,
other platforms need to select it in defconfig.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Fix smatch warning:

drivers/soc/fsl/qe/ucc.c:526
 ucc_set_tdm_rxtx_clk() warn: unsigned 'tdm_num' is never less than zero.

'tdm_num' is u32 type, never less than zero.
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

This addresses the following gcc warning with "make W=1":

drivers/soc/fsl/dpio/qbman-portal.c: In function
‘qbman_swp_enqueue_multiple_direct’:
drivers/soc/fsl/dpio/qbman-portal.c:650:11: warning: variable
‘addr_cena’ set but not used [-Wunused-but-set-variable]
  650 |  uint64_t addr_cena;
      |           ^~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

On error the function was meant to return -ERRNO.  This also fixes
compile warning:

  drivers/soc/fsl/qbman/bman.c:640:6: warning: variable 'err' set but not used [-Wunused-but-set-variable]

Fixes: 0505d00c ("soc/fsl/qbman: Cleanup buffer pools if BMan was initialized prior to bootup")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

This fixes compile warnings from the -Wpacked-not-aligned option.

In file included from ../drivers/crypto/caam/qi.c:12:
../include/soc/fsl/qman.h:259:1: warning: alignment 1 of ‘struct qm_dqrr_entry’ is less than 8 [-Wpacked-not-aligned]
 } __packed;
 ^
../include/soc/fsl/qman.h:292:2: warning: alignment 1 of ‘struct <anonymous>’ is less than 8 [-Wpacked-not-aligned]
  } __packed ern;
  ^
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Li Yang <leoyang.li@nxp.com>

  $id: 'http://devicetree.org/schemas/soc/ti/ti,pruss.yaml' does not match
'http://devicetree.org/schemas/.*\\.yaml#'
  $schema: 'http://devicetree.org/meta-schemas/core.yaml' is not one of
['http://devicetree.org/meta-schemas/core.yaml#',
'http://devicetree.org/meta-schemas/base.yaml#']
  Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml: ignoring,
error in schema: $id

Fixes: bd691ce0 ("dt-bindings: soc: ti: Add TI PRUSS bindings")
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>

Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.

Along with this change, we get additionally:
        .owner          = THIS_MODULE,
        .llseek         = seq_lseek,

1. The llseek method is used to change the current read/write position
in a file which can be ignored if you don't use it.
2. The owner is not even a method. Instead, it is a pointer to the
module that “owns” this structure; it is used by the kernel to maintain
the module's usage count which can be ignored.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20200917125113.103550-1-miaoqinglang@huawei.comSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20200917125114.103598-1-miaoqinglang@huawei.comSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

The Power Controller in the Amlogic AXG SoCs is similar to the GXL one
but with less VPU memory domains to enable and a supplementary Audio
memory power domain.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200917064702.1459-3-narmstrong@baylibre.com

This add the bindings of the Power Controller found in the Amlogic AXG SoCs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200917064702.1459-2-narmstrong@baylibre.com

Enable support for the BPMP on Tegra234 to avoid relying on Tegra194
being enabled to pull in the needed OF device ID table entry.

On simulation platforms the BPMP hasn't booted up yet by the time we
probe the BPMP driver and the BPMP hasn't had a chance to mark the
doorbell as ringable by the CCPLEX. This corresponding check in the
BPMP driver will therefore fail. Work around this by disabling the
check on simulation platforms.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The PMC block is largely similar to that found on earlier chips, but
not completely compatible. Allow binding to the instantiation found on
Tegra234.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Move the definitions of reset sources and levels into a more natural
location.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The MISC block is largely similar to that found on earlier chips, but
not completely compatible. Allow binding to the instantiation found on
Tegra234.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Add support for FUSE block found on the Tegra234 SoC, which is largely
similar to the IP found on previous generations.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This function can be used by drivers to determine whether code is
running on silicon or on a simulation platform.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This function extracts the PRE_SI_PLATFORM field from the HIDREV
register and can be used to determine which platform the kernel runs on
(silicon, simulation, ...). Note that while only Tegra194 and later
define this field, it should be safe to call this on prior generations
as well since this field should read as 0, indicating silicon.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

If the dev->groups is initialised, the sysfs group is created as part
of device_add call. There is no need to call sysfs_create/delete_group
explicitly.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>