- 01 Jan, 2007 1 commit
-
-
Linus Torvalds authored
...because it's always a good idea to cut a release *before* you go out to party and get drunk. Remember kids: "Don't Drink and Release!"
-
- 31 Dec, 2006 9 commits
-
-
Oleg Nesterov authored
Commit b2b2cbc4 introduced a user- visible change: ->pdeath_signal is sent only when the entire thread group exits. While this change is imho good, it may break things. So restore the old behaviour for now. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> To: Albert Cahalan <acahalan@gmail.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Andrew Morton <akpm@osdl.org> Cc: Linus Torvalds <torvalds@osdl.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Qi Yong <qiyong@fc-cn.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Handle ISA devices with no 'regs' property. [SPARC64]: Update defconfig. [SPARC64]: Fix of_iounmap() region release. [SPARC64]: Fix "mem=xxx" handling.
-
Martin Willi authored
Installing an IPsec SA using old algorithm names (.compat) does not work if the algorithm is not already loaded. When not using the PF_KEY interface, algorithms are not preloaded in xfrm_probe_algs() and installing a IPsec SA fails. Signed-off-by:
Martin Willi <martin@strongswan.org> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Woodhouse authored
Don't add it there please; add it lower down inside the existing #ifdef __KERNEL__. You just made the _userspace_ net.h include random.h, which then fails to compile unless <asm/types.h> was already included. Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
David S. Miller authored
When a driver writer calls this, they generally expect that all previous stores and modifications they've made will be visible before netif_poll_enable() executes, so ensure this. Noticed by Ben H. Signed-off-by: -
David S. Miller authored
And this points out that the return value from isa_dev_get_resource() and the 'pregs' arg to isa_dev_get_irq() are totally unused. Based upon a patch from Richard Mortimer <richm@oldelvet.org.uk> Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
We need to pass in the resource otherwise we cannot release the region properly. We must know whether it is an I/O or MEM resource. Spotted by Eric Brower. Signed-off-by: -
David S. Miller authored
We were not being careful enough. When we trim the physical memory areas, we have to make sure we don't remove the kernel image or initial ramdisk image ranges. Signed-off-by:
-
- 30 Dec, 2006 30 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2Linus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: export heartbeat thread pid via configfs ocfs2: always unmap in ocfs2_data_convert_worker() ocfs2: ignore NULL vfsmnt in ocfs2_should_update_atime() ocfs2: Allow direct I/O read past end of file ocfs2: don't print error in ocfs2_permission()
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: sbp2: fix bogus dma mapping ieee1394: sbp2: pass REQUEST_SENSE through to the target
-
Alexey Dobriyan authored
Signed-off-by:
Thomas Hisch <t.hisch@gmail.com> Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Jan Andersson authored
Add sg->offset to sg->dvma_address in pci_map_sg() on sparc32. Without the offset, transfers to buffers that do not begin on a page boundary will not work as expected. Signed-off-by:
Jan Andersson <jan.andersson@ieee.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by:
-
Ingo Molnar authored
fix an GFP_KERNEL allocation in atomic section: kvm_dev_ioctl_create_vcpu() called kvm_mmu_init(), which calls alloc_pages(), while holding the vcpu. The fix is to set up the MMU state in two phases: kvm_mmu_create() and kvm_mmu_setup(). (NOTE: free_vcpus does an kvm_mmu_destroy() call so there's no need for any extra teardown branch on allocation/init failure here.) Signed-off-by:
Ingo Molnar <mingo@elte.hu> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by:
-
Avi Kivity authored
__free_page() doesn't like a NULL argument, so check before calling it. A NULL can only happen if memory is exhausted during allocation of a memory slot. Signed-off-by:
Avi Kivity <avi@qumranet.com> Signed-off-by:
-
Nguyen Anh Quynh authored
No need to append _MSR to msr names, a prefix should suffice. Signed-off-by:
Nguyen Anh Quynh <aquynh@gmail.com> Signed-off-by:
-
Avi Kivity authored
These msrs are referenced by benchmarking software when pretending to be an Intel cpu. Signed-off-by:
-
Avi Kivity authored
Signed-off-by:
-
Avi Kivity authored
Resolves sourceforge bug 1622229 (guest crashes running benchmark software). Signed-off-by:
-
Yoshimi Ichiyanagi authored
The latest version of kvm doesn't initialize kvm_arch_ops in kvm_init(), which causes an error with the following sequence. 1. Load the supported arch's module. 2. Load the unsupported arch's module.$B!!(B(loading error) 3. Unload the unsupported arch's module. You'll get the following error message after step 3. "BUG: unable to handle to handle kernel paging request at virtual address xxxxxxxx" The problem here is that the unsupported arch's module overwrites kvm_arch_ops of the supported arch's module at step 2. This patch initializes kvm_arch_ops upon loading architecture specific kvm module, and prevents overwriting kvm_arch_ops when kvm_arch_ops is already set correctly. Signed-off-by:
-
Avi Kivity authored
Instead of doing tricky stuff with the arch dependent virtualization registers, take a peek at the guest's efer. This simlifies some code, and fixes some confusion in the mmu branch. Signed-off-by:
-
Avi Kivity authored
current_cpu_data invokes smp_processor_id(), which is inadvisable when preemption is enabled. Switch to boot_cpu_data instead. Resolves sourceforge bug 1621401. Signed-off-by:
-
Lennert Buytenhek authored
Signed-off-by:
Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by:
-
Sergei Shtylyov authored
The fallback to PIO mode in the hwif->dma_check() handler doesn't work in the Intel PIIX and SMsC SLC90E66 IDE drivers because: - config_drive_for_dma() calls the hwif->speedproc() handler with a wrong mode number (unbiased by XFER_PIO_0) in case of the PIO fallback; - hwif->tuneproc() handler doesn't really set the drive's own speed (this is not fixed as yet). Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by:
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by:
-
Sergei Shtylyov authored
There's no need to check in piix_config_drive_for_dma() for broken MW DMA mode 0 as this mode is not supported by the driver (it sets hwif->mwdma_mask to 0x6), and hence can't be selected by ide_dma_speed(). (Alan sayeth "Probably right but if not you've got a subtle corruptor. Should at least stick a BUG_ON mode 0 setting right close when the mode is set.") Signed-off-by:
-
Andrew Morton authored
kernel/lockdep.c: In function `lookup_chain_cache': kernel/lockdep.c:1339: warning: long long unsigned int format, u64 arg (arg 2) kernel/lockdep.c:1344: warning: long long unsigned int format, u64 arg (arg 2) Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Arnaud Patard (Rtp authored
Russel King recently reminded us that one shouldn't use asm/arch/hardware.h but one should use asm/hardware.h. Unfortunately, the spi_s3c24xx_gpio driver is using the wrong header. This patch is fixing that. Signed-off-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Mike Frysinger authored
The KERNELDOC and DOCPROC variables are relative to the $(srctree)/$(objtree) and expect to be run only from there ... attached patch adds proper srctree/objtree prefixes to both variables. Acked-by:
"Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by:
-
Andrew Morton authored
fs/proc/base.c:1869: warning: initialization discards qualifiers from pointer target type fs/proc/base.c:2150: warning: initialization discards qualifiers from pointer target type Cc: Paul Jackson <pj@sgi.com> Signed-off-by:
-
Shantanu Goel authored
Fix a rather obvious buglet. Noticed while instrumenting the VM using /proc/vmstat. Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by:
-
Kyungmin Park authored
Fix apollon board compiler error Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Kyungmin Park authored
Fix GPMC compiler errors on OMAP2 Signed-off-by:
-
David Brownell authored
Return a fault code if the Dataflash driver runs into a "no device present" error when the MISO line has a pulldown (it currently expects a pullup), so that rmmod won't oops. Signed-off-by:
-
David Brownell authored
Fix build issues that show up with the m25p80 SPI flash driver when building with MTD debug enabled. Signed-off-by:
-
David Brownell authored
Some issues were recently turned up with the current specification of what it means for spi_transfer.tx_buf to be null, as part of transfers which are (from the SPI protocol driver perspective) pure reads. Specifically, that it seems better to change the TX behaviour there from "undefined" to "will shift zeroes". This lets protocol drivers (like the ads7846 driver) depend on that behavior. It's what most controller drivers in the tree are already doing (with one exception and one case of driver wanting-to-oops), it's what Microwire hardware will necessarily be doing, and it removes an issue whereby certain security audits would need to define such a value anyway as part of removing covert channels. This patch changes the specification to require shifting zeroes, and updates all currently merged SPI controller drivers to do so. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Al Viro authored
(akpm: macros are wonderful) Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Randy Dunlap authored
RAID_UNKNOWN is used even when PROC_FS=n, so move it outside of the CONFIG_PROC_FS block. drivers/block/cciss.c:1910: error: 'RAID_UNKNOWN' undeclared (first use in this function) Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Dimitri Gorokhovik authored
Recent cleanup of slab.h broke SLOB allocator: the routine kmem_cache_init has now the __init attribute for both slab.c and slob.c. This routine cannot be removed after init in the case of slob.c -- it serves as a timer callback. Provide a separate timer callback routine, call it once from kmem_cache_init, keep the __init attribute on the latter. Signed-off-by:
Dimitri Gorokhovik <dimitri.gorokhovik@free.fr> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by:
-
Dimitri Gorokhovik authored
ramfs doesn't provide the .set_dirty_page a_op, and when the BLOCK layer is not configured in, 'set_page_dirty' makes a call via a NULL pointer. Signed-off-by:
-
