There are spelling mistakes in structure elements, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add missing <of_device_id> table for SPI driver relying on SPI
device match since compatible is in a DT binding or in a DTS.

Before this patch:
modinfo drivers/nfc/st95hf/st95hf.ko | grep alias
alias:          spi:st95hf

After this patch:
modinfo drivers/nfc/st95hf/st95hf.ko | grep alias
alias:          spi:st95hf
alias:          of:N*T*Cst,st95hfC*
alias:          of:N*T*Cst,st95hf
Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add missing <of_device_id> table for SPI driver relying on SPI
device match since compatible is in a DT binding or in a DTS.

Before this patch:
modinfo drivers/net/phy/spi_ks8995.ko | grep alias
alias:          spi:ksz8795
alias:          spi:ksz8864
alias:          spi:ks8995

After this patch:
modinfo drivers/net/phy/spi_ks8995.ko | grep alias
alias:          spi:ksz8795
alias:          spi:ksz8864
alias:          spi:ks8995
alias:          of:N*T*Cmicrel,ksz8795C*
alias:          of:N*T*Cmicrel,ksz8795
alias:          of:N*T*Cmicrel,ksz8864C*
alias:          of:N*T*Cmicrel,ksz8864
alias:          of:N*T*Cmicrel,ks8995C*
alias:          of:N*T*Cmicrel,ks8995
Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac_check_ether_addr() checks the MAC address and assigns one in
driver open(). In many cases when we create slave netdevice, the dev
addr is inherited from master but the master dev addr maybe NULL at
that time, so move this call to driver probe so that address is
always valid.
Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org>
Tested-by: Xiaofei Shen <xiaofeis@codeaurora.org>
Signed-off-by: Sneh Shah <snehshah@codeaurora.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes for your net tree:

1) Add a selftest for icmp packet too big errors with conntrack, from
   Florian Westphal.

2) Validate inner header in ICMP error message does not lie to us
   in conntrack, also from Florian.

3) Initialize ct->timeout to calm down KASAN, from Alexander Potapenko.

4) Skip ICMP error messages from tunnels in IPVS, from Julian Anastasov.

5) Use a hash to expose conntrack and expectation ID, from Florian Westphal.

6) Prevent shift wrap in nft_chain_parse_hook(), from Dan Carpenter.

7) Fix broken ICMP ID randomization with NAT, also from Florian.

8) Remove WARN_ON in ebtables compat that is reached via syzkaller,
   from Florian Westphal.

9) Fix broken timestamps since fb420d5d ("tcp/fq: move back to
   CLOCK_MONOTONIC"), from Florian.

10) Fix logging of invalid packets in conntrack, from Andrei Vagin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

It doesn't log a packet if sysctl_log_invalid isn't equal to protonum
OR sysctl_log_invalid isn't equal to IPPROTO_RAW. This sentence is
always true. I believe we need to replace OR to AND.

Cc: Florian Westphal <fw@strlen.de>
Fixes: c4f3db15 ("netfilter: conntrack: add and use nf_l4proto_log_invalid")
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

setting net.netfilter.nf_conntrack_timestamp=1 breaks xmit with fq
scheduler.  skb->tstamp might be "refreshed" using ktime_get_real(),
but fq expects CLOCK_MONOTONIC.

This patch removes all places in netfilter that check/set skb->tstamp:

1. To fix the bogus "start" time seen with conntrack timestamping for
   outgoing packets, never use skb->tstamp and always use current time.
2. In nfqueue and nflog, only use skb->tstamp for incoming packets,
   as determined by current hook (prerouting, input, forward).
3. xt_time has to use system clock as well rather than skb->tstamp.
   We could still use skb->tstamp for prerouting/input/foward, but
   I see no advantage to make this conditional.

Fixes: fb420d5d ("tcp/fq: move back to CLOCK_MONOTONIC")
Cc: Eric Dumazet <edumazet@google.com>
Reported-by: Michal Soltys <soltys@ziu.info>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

It means userspace gave us a ruleset where there is some other
data after the ebtables target but before the beginning of the next rule.

Fixes: 81e675c2 ("netfilter: ebtables: add CONFIG_COMPAT support")
Reported-by: syzbot+659574e7bcc7f7eb4df7@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

CONFIG_DECNET_ROUTE_FWMARK was removed in commit 47dcf0cb ("[NET]: Rethink mark field in struct flowi")
Since nothing replace it (and nothindg need to replace it, simply remove
it from documentation.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When working on the Allwinner internal PHY, the first work was to use
the "internal" mode, but some answer was made my mail on what are really
internal mean for PHY.

This patch write that in the doc.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

When device refuses the offload in tls_set_device_offload_rx()
it calls tls_sw_free_resources_rx() to clean up software context
state.

Unfortunately, tls_sw_free_resources_rx() does not free all
the state tls_set_sw_offload() allocated - it leaks IV and
sequence number buffers.  All other code paths which lead to
tls_sw_release_resources_rx() (which tls_sw_free_resources_rx()
calls) free those right before the call.

Avoid the leak by moving freeing of iv and rec_seq into
tls_sw_release_resources_rx().

Fixes: 4799ac81 ("tls: Add rx inline crypto offload")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If device supports offload, but offload fails tls_set_device_offload_rx()
will call tls_sw_free_resources_rx() which (unhelpfully) releases
and reacquires the socket lock.

For a small fix release and reacquire the device_offload_lock.

Fixes: 4799ac81 ("tls: Add rx inline crypto offload")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The run_afpackettests will be marked as passed regardless the return
value of those sub-tests in the script:
    --------------------
    running psock_tpacket test
    --------------------
    [FAIL]
    selftests: run_afpackettests [PASS]

Fix this by changing the return value for each tests.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2019-04-19

This series introduces some fixes to mlx5 driver.

Please pull and let me know if there is any problem.

For -stable v4.7:
  ('net/mlx5e: ethtool, Remove unsupported SFP EEPROM high pages query')

For -stable v4.19:
  ('net/mlx5e: Fix the max MTU check in case of XDP')

For -stable v5.0:
  ('net/mlx5e: Fix use-after-free after xdp_return_frame')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If we add a bond device which is already the master of the team interface,
we will hold the team->lock in team_add_slave() first and then request the
lock in team_set_mac_address() again. The functions are called like:

- team_add_slave()
 - team_port_add()
   - team_port_enter()
     - team_modeop_port_enter()
       - __set_port_dev_addr()
         - dev_set_mac_address()
           - bond_set_mac_address()
             - dev_set_mac_address()
  	       - team_set_mac_address

Although team_upper_dev_link() would check the upper devices but it is
called too late. Fix it by adding a checking before processing the slave.

v2: Do not split the string in netdev_err()

Fixes: 3d249d4c ("net: introduce ethernet teaming device")
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The run_netsocktests will be marked as passed regardless the actual test
result from the ./socket:

    selftests: net: run_netsocktests
    ========================================
    --------------------
    running socket test
    --------------------
    [FAIL]
    ok 1..6 selftests: net: run_netsocktests [PASS]

This is because the test script itself has been successfully executed.
Fix this by exit 1 when the test failed.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Querying EEPROM high pages data for SFP module is currently
not supported by our driver and yet queried, resulting in
invalid FW queries.

Set the EEPROM ethtool data length to 256 for SFP module will
limit the reading for page 0 only and prevent invalid FW queries.

Fixes: bb64143e ("net/mlx5e: Add ethtool support for dump module EEPROM")
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

MLX5E_XDP_MAX_MTU was calculated incorrectly. It didn't account for
NET_IP_ALIGN and MLX5E_HW2SW_MTU, and it also misused MLX5_SKB_FRAG_SZ.
This commit fixes the calculations and adds a brief explanation for the
formula used.

Fixes: a26a5bdf ("net/mlx5e: Restrict the combination of large MTU and XDP")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

xdp_return_frame releases the frame. It leads to releasing the page, so
it's not allowed to access xdpi.xdpf->len after that, because xdpi.xdpf
is at xdp->data_hard_start after convert_to_xdp_frame. This patch moves
the memory access to precede the return of the frame.

Fixes: 58b99ee3 ("net/mlx5e: Add support for XDP_REDIRECT in device-out side")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

I've discovered following discrepancy in the bindings/net/ethernet.txt
documentation, where it states following:

 - nvmem-cells: phandle, reference to an nvmem node for the MAC address;
 - nvmem-cell-names: string, should be "mac-address" if nvmem is to be..

which is actually misleading and confusing. There are only two ethernet
drivers in the tree, cadence/macb and davinci which supports this
properties.

This nvmem-cell* properties were introduced in commit 9217e566
("of_net: Implement of_get_nvmem_mac_address helper"), but
commit afa64a72 ("of: net: kill of_get_nvmem_mac_address()")
forget to properly clean up this parts.

So this patch fixes the documentation by moving the nvmem-cell*
properties at the appropriate places.  While at it, I've removed unused
include as well.

Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Fixes: afa64a72 ("of: net: kill of_get_nvmem_mac_address()")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unlike atomic_add(), refcount_add() does not deal well
with a negative argument.  TLS fallback code reallocates
the skb and is very likely to shrink the truesize, leading to:

[  189.513254] WARNING: CPU: 5 PID: 0 at lib/refcount.c:81 refcount_add_not_zero_checked+0x15c/0x180
 Call Trace:
  refcount_add_checked+0x6/0x40
  tls_enc_skb+0xb93/0x13e0 [tls]

Once wmem_allocated count saturates the application can no longer
send data on the socket.  This is similar to Eric's fixes for GSO,
TCP:
commit 7ec318fe ("tcp: gso: avoid refcount_t warning from tcp_gso_segment()")
and UDP:
commit 575b65bc ("udp: avoid refcount_t saturation in __udp_gso_segment()").

Unlike the GSO case, for TLS fallback it's likely that the skb has
shrunk, so the "likely" annotation is the other way around (likely
branch being "sub").

Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since there are more IOT2040 variants with identical hardware but
different asset tags, the asset tag matching should be adjusted to
support them.

For the board name "SIMATIC IOT2000", currently there are 2 types of
hardware, IOT2020 and IOT2040. The IOT2020 is identified by its unique
asset tag. Match on it first. If we then match on the board name only,
we will catch all IOT2040 variants. In the future there will be no other
devices with the "SIMATIC IOT2000" DMI board name but different
hardware.
Signed-off-by: Su Bao Cheng <baocheng.su@siemens.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a spelling mistake in a debug message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a spelling mistake in a NL_SET_ERR_MSG_MOD error message,
fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Few small fixes

Patch #1, from Petr, adjusts mlxsw to provide the same QoS behavior for
both Spectrum-1 and Spectrum-2. The fix is required due to a difference
in the behavior of Spectrum-2 compared to Spectrum-1. The problem and
solution are described in the detail in the changelog.

Patch #2 increases the time period in which the driver waits for the
firmware to signal it has finished its initialization. The issue will be
fixed in future firmware versions and the timeout will be decreased.

Patch #3, from Amit, fixes a display problem where the autoneg status in
ethtool is not updated in case the netdev is not running.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If link is down and autoneg is set to on/off, the status in ethtool does
not change.

The reason is when the link is down the function returns with zero
before changing autoneg value.

Move the checking of link state (up/down) to be performed after setting
autoneg value, in order to be sure that autoneg will change in any case.

Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During driver initialization the driver sends a reset to the device and
waits for the firmware to signal that it is ready to continue.

Commit d2f372ba ("mlxsw: pci: Increase PCI SW reset timeout")
increased the timeout to 13 seconds due to longer PHY calibration in
Spectrum-2 compared to Spectrum-1.

Recently it became apparent that this timeout is too short and therefore
this patch increases it again to a safer limit that will be reduced in
the future.

Fixes: c3ab4354 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Fixes: d2f372ba ("mlxsw: pci: Increase PCI SW reset timeout")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Both Spectrum-1 and Spectrum-2 chips are currently configured such that
pairs of TC n (which is used for UC traffic) and TC n+8 (which is used
for MC traffic) are feeding into the same subgroup. Strict
prioritization is configured between the two TCs, and by enabling
MC-aware mode on the switch, the lower-numbered (UC) TCs are favored
over the higher-numbered (MC) TCs.

On Spectrum-2 however, there is an issue in configuration of the
MC-aware mode. As a result, MC traffic is prioritized over UC traffic.
To work around the issue, configure the MC TCs with DWRR mode (while
keeping the UC TCs in strict mode).

With this patch, the multicast-unicast arbitration results in the same
behavior on both Spectrum-1 and Spectrum-2 chips.

Fixes: 7b819530 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

clang points out that the return code from this function is
undefined for one of the error paths:

../drivers/s390/net/ctcm_main.c:1595:7: warning: variable 'result' is used uninitialized whenever 'if' condition is true
      [-Wsometimes-uninitialized]
                if (priv->channel[direction] == NULL) {
                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/s390/net/ctcm_main.c:1638:9: note: uninitialized use occurs here
        return result;
               ^~~~~~
../drivers/s390/net/ctcm_main.c:1595:3: note: remove the 'if' if its condition is always false
                if (priv->channel[direction] == NULL) {
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/s390/net/ctcm_main.c:1539:12: note: initialize the variable 'result' to silence this warning
        int result;
                  ^

Make it return -ENODEV here, as in the related failure cases.
gcc has a known bug in underreporting some of these warnings
when it has already eliminated the assignment of the return code
based on some earlier optimization step.
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are a couple of spelling mistakes in NL_SET_ERR_MSG_MOD error
messages. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

gcc warn this:

drivers/net/ethernet/stmicro/stmmac/norm_desc.c: In function ndesc_init_rx_desc:
drivers/net/ethernet/stmicro/stmmac/norm_desc.c:138:6: warning: variable 'bfsize1' set but not used [-Wunused-but-set-variable]

Like enh_desc_init_rx_desc, we should use bfsize1
in ndesc_init_rx_desc to calculate 'p->des1'

Fixes: 583e6361 ("net: stmmac: use correct DMA buffer size in the RX descriptor")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a UBSAN report as below:
UBSAN: Undefined behaviour in net/ipv4/tcp_input.c:2877:56
signed integer overflow:
2147483647 * 1000 cannot be represented in type 'int'
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.1.0-rc4-00058-g582549e3 #1
Call Trace:
 <IRQ>
 dump_stack+0x8c/0xba
 ubsan_epilogue+0x11/0x60
 handle_overflow+0x12d/0x170
 ? ttwu_do_wakeup+0x21/0x320
 __ubsan_handle_mul_overflow+0x12/0x20
 tcp_ack_update_rtt+0x76c/0x780
 tcp_clean_rtx_queue+0x499/0x14d0
 tcp_ack+0x69e/0x1240
 ? __wake_up_sync_key+0x2c/0x50
 ? update_group_capacity+0x50/0x680
 tcp_rcv_established+0x4e2/0xe10
 tcp_v4_do_rcv+0x22b/0x420
 tcp_v4_rcv+0xfe8/0x1190
 ip_protocol_deliver_rcu+0x36/0x180
 ip_local_deliver+0x15b/0x1a0
 ip_rcv+0xac/0xd0
 __netif_receive_skb_one_core+0x7f/0xb0
 __netif_receive_skb+0x33/0xc0
 netif_receive_skb_internal+0x84/0x1c0
 napi_gro_receive+0x2a0/0x300
 receive_buf+0x3d4/0x2350
 ? detach_buf_split+0x159/0x390
 virtnet_poll+0x198/0x840
 ? reweight_entity+0x243/0x4b0
 net_rx_action+0x25c/0x770
 __do_softirq+0x19b/0x66d
 irq_exit+0x1eb/0x230
 do_IRQ+0x7a/0x150
 common_interrupt+0xf/0xf
 </IRQ>

It can be reproduced by:
  echo 2147483647 > /proc/sys/net/ipv4/tcp_min_rtt_wlen

Fixes: f6722583 ("tcp: track min RTT using windowed min-filter")
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull IPMI fixes from Corey Minyard:
 "Fixes for some bugs cause by recent changes. One crash if you feed bad
  data to the module parameters, one BUG that sometimes occurs when a
  user closes the connection, and one bug that cause the driver to not
  work if the configuration information only comes in from SMBIOS"

* tag 'for-linus-5.1-2' of git://github.com/cminyard/linux-ipmi:
  ipmi: fix sleep-in-atomic in free_user at cleanup SRCU user->release_barrier
  ipmi: ipmi_si_hardcode.c: init si_type array to fix a crash
  ipmi: Fix failure on SMBIOS specified devices

Pull networking fixes from David Miller:

 1) Handle init flow failures properly in iwlwifi driver, from Shahar S
    Matityahu.

 2) mac80211 TXQs need to be unscheduled on powersave start, from Felix
    Fietkau.

 3) SKB memory accounting fix in A-MDSU aggregation, from Felix Fietkau.

 4) Increase RCU lock hold time in mlx5 FPGA code, from Saeed Mahameed.

 5) Avoid checksum complete with XDP in mlx5, also from Saeed.

 6) Fix netdev feature clobbering in ibmvnic driver, from Thomas Falcon.

 7) Partial sent TLS record leak fix from Jakub Kicinski.

 8) Reject zero size iova range in vhost, from Jason Wang.

 9) Allow pending work to complete before clcsock release from Karsten
    Graul.

10) Fix XDP handling max MTU in thunderx, from Matteo Croce.

11) A lot of protocols look at the sa_family field of a sockaddr before
    validating it's length is large enough, from Tetsuo Handa.

12) Don't write to free'd pointer in qede ptp error path, from Colin Ian
    King.

13) Have to recompile IP options in ipv4_link_failure because it can be
    invoked from ARP, from Stephen Suryaputra.

14) Doorbell handling fixes in qed from Denis Bolotin.

15) Revert net-sysfs kobject register leak fix, it causes new problems.
    From Wang Hai.

16) Spectre v1 fix in ATM code, from Gustavo A. R. Silva.

17) Fix put of BROPT_VLAN_STATS_PER_PORT in bridging code, from Nikolay
    Aleksandrov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (111 commits)
  socket: fix compat SO_RCVTIMEO_NEW/SO_SNDTIMEO_NEW
  tcp: tcp_grow_window() needs to respect tcp_space()
  ocelot: Clean up stats update deferred work
  ocelot: Don't sleep in atomic context (irqs_disabled())
  net: bridge: fix netlink export of vlan_stats_per_port option
  qed: fix spelling mistake "faspath" -> "fastpath"
  tipc: set sysctl_tipc_rmem and named_timeout right range
  tipc: fix link established but not in session
  net: Fix missing meta data in skb with vlan packet
  net: atm: Fix potential Spectre v1 vulnerabilities
  net/core: work around section mismatch warning for ptp_classifier
  net: bridge: fix per-port af_packet sockets
  bnx2x: fix spelling mistake "dicline" -> "decline"
  route: Avoid crash from dereferencing NULL rt->from
  MAINTAINERS: normalize Woojung Huh's email address
  bonding: fix event handling for stacked bonds
  Revert "net-sysfs: Fix memory leak in netdev_register_kobject"
  rtnetlink: fix rtnl_valid_stats_req() nlmsg_len check
  qed: Fix the DORQ's attentions handling
  qed: Fix missing DORQ attentions
  ...

free_user() could be called in atomic context.

This patch pushed the free operation off into a workqueue.

Example:

 BUG: sleeping function called from invalid context at kernel/workqueue.c:2856
 in_atomic(): 1, irqs_disabled(): 0, pid: 177, name: ksoftirqd/27
 CPU: 27 PID: 177 Comm: ksoftirqd/27 Not tainted 4.19.25-3 #1
 Hardware name: AIC 1S-HV26-08/MB-DPSB04-06, BIOS IVYBV060 10/21/2015
 Call Trace:
  dump_stack+0x5c/0x7b
  ___might_sleep+0xec/0x110
  __flush_work+0x48/0x1f0
  ? try_to_del_timer_sync+0x4d/0x80
  _cleanup_srcu_struct+0x104/0x140
  free_user+0x18/0x30 [ipmi_msghandler]
  ipmi_free_recv_msg+0x3a/0x50 [ipmi_msghandler]
  deliver_response+0xbd/0xd0 [ipmi_msghandler]
  deliver_local_response+0xe/0x30 [ipmi_msghandler]
  handle_one_recv_msg+0x163/0xc80 [ipmi_msghandler]
  ? dequeue_entity+0xa0/0x960
  handle_new_recv_msgs+0x15c/0x1f0 [ipmi_msghandler]
  tasklet_action_common.isra.22+0x103/0x120
  __do_softirq+0xf8/0x2d7
  run_ksoftirqd+0x26/0x50
  smpboot_thread_fn+0x11d/0x1e0
  kthread+0x103/0x140
  ? sort_range+0x20/0x20
  ? kthread_destroy_worker+0x40/0x40
  ret_from_fork+0x1f/0x40

Fixes: 77f82696 ("ipmi: fix use-after-free of user->release_barrier.rda")
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 5.0
Cc: Yang Yingliang <yangyingliang@huawei.com>

It looks like the new socket options only work correctly
for native execution, but in case of compat mode fall back
to the old behavior as we ignore the 'old_timeval' flag.

Rework so we treat SO_RCVTIMEO_NEW/SO_SNDTIMEO_NEW the
same way in compat and native 32-bit mode.

Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Fixes: a9beb86a ("sock: Add SO_RCVTIMEO_NEW and SO_SNDTIMEO_NEW")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For some reason, tcp_grow_window() correctly tests if enough room
is present before attempting to increase tp->rcv_ssthresh,
but does not prevent it to grow past tcp_space()

This is causing hard to debug issues, like failing
the (__tcp_select_window(sk) >= tp->rcv_wnd) test
in __tcp_ack_snd_check(), causing ACK delays and possibly
slow flows.

Depending on tcp_rmem[2], MTU, skb->len/skb->truesize ratio,
we can see the problem happening on "netperf -t TCP_RR -- -r 2000,2000"
after about 60 round trips, when the active side no longer sends
immediate acks.

This bug predates git history.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is preventive cleanup that may save troubles later.
No need to cancel repeateadly queued work if code is properly
refactored.
Don't let the ethtool -s process interfere with the stat workqueue
scheduling.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Preemption disabled at:
 [<ffff000008cabd54>] dev_set_rx_mode+0x1c/0x38
 Call trace:
 [<ffff00000808a5c0>] dump_backtrace+0x0/0x3d0
 [<ffff00000808a9a4>] show_stack+0x14/0x20
 [<ffff000008e6c0c0>] dump_stack+0xac/0xe4
 [<ffff0000080fe76c>] ___might_sleep+0x164/0x238
 [<ffff0000080fe890>] __might_sleep+0x50/0x88
 [<ffff0000082261e4>] kmem_cache_alloc+0x17c/0x1d0
 [<ffff000000ea0ae8>] ocelot_set_rx_mode+0x108/0x188 [mscc_ocelot_common]
 [<ffff000008cabcf0>] __dev_set_rx_mode+0x58/0xa0
 [<ffff000008cabd5c>] dev_set_rx_mode+0x24/0x38

Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the introduction of the vlan_stats_per_port option the netlink
export of it has been broken since I made a typo and used the ifla
attribute instead of the bridge option to retrieve its state.
Sysfs export is fine, only netlink export has been affected.

Fixes: 9163a0fc ("net: bridge: add support for per-port vlan stats")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>