This is ancient stuff and we don't do things this way anymore.  In the
absence of simply deleting the document, at least add a warning to it.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

This is crufty stuff and should maybe just be deleted, but I'm not quite
ready to do that yet.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

I believe this makes the page as a whole more approachable.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

The main goal here was to get the subsections to show in the TOC as they do
for all the other documents.  Also call out the DCO in the section title
since it's important.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Put like documents together, with the essential ones at the top, and split
the TOC into sections.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

The document has not been touched in over 11 years and doesn't reflect how
profiling is done in the perf era.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

The last release of this tool was for 2.6.28; it's hard to see how it has
any relevance to current kernels.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

The admin guide is a good start, but it's time to turn it into something
better than an unordered blob of files.  This is a first step in that
direction.  The TOC has been split up and annotated, the guides have been
reordered, and minor tweaks have been applied to a few of them.

One consequence of splitting up the TOC is that we don't really want to use
:numbered: anymore, since the count resets every time and there doesn't
seem to be a way to change that.  Eventually we probably want to group the
documents into sub-books, at which point we can go back to a single TOC,
but it's probably early to do that.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Let's make the title of this document (which shows up in the top page)
better describe its contents.

Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

This will be the initial landing point for readers, so give them a bit of
introductory material.  Also split the TOC into area-specific chunks to
make the whole thing a bit more approachable.
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Merge Mauro's massive patch series creating the process and admin-guide
books.  I think there's a lot of stuff to clean up here, but there's no
point in holding things up for that.

Mauro sez:

This patch series continues the efforts of converting the Linux Kernel
documentation to Sphinx.

It contains text to ReST conversion of several files under Documentation,
and a few ones under the main dir (README, REPORTING-BUGS).

All patches on this series can be found on my development tree:
	https://git.linuxtv.org/mchehab/experimental.git/log/?h=lkml-books-v2

The Kernel docs html output after this series can be seen at:
	https://mchehab.fedorapeople.org/kernel_docs/

Fix some minor spelling errors and capitalization issues.
Signed-off-by: Igor Vuk <parcijala@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

This commit applies upstream change, commit ebff09a6
("locking/Documentation: Clarify limited control-dependency scope"), to
Korean translation.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

The dvb/ and video4linux/ dirs were removed, as now, all media
documentation is under media/.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

As we moved the real README file to Documentation/admin-guide/README.rst,
let's add a replacement, pointing to it, and giving the main directions
about documentation.

In the future, perhaps it would be worth to move the contents
of Documentation/00-Index into this README.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Those files got moved to Documentation/process, but as they're very
well known files, add pointers to their new locations.

PS.: I opted to not merge this patch with the previous one
in order to make the diff of the previous one more consistent,
as it will show only renames.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The previous patch renamed several files that are cross-referenced
along the Kernel documentation. Adjust the links to point to
the right places.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Place README, REPORTING-BUGS, SecurityBugs and kernel-parameters
on an user's manual book.

As we'll be numbering the user's manual, remove the manual
numbering from SecurityBugs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Add several documents to the development-process ReST book.

As we don't want renames, use symlinks instead, keeping those
documents on their original place.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

As we'll type this a lot, after adding CodingStyle & friends,
let's rename the directory name to a shorter one.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Adjust the readme file for it to use the ReST markup:

- add chapter/section markups;
- use ``foo`` for commands;
- use :: for verbatim and script blocks;
- replace unsupported markup _foo_ by **foo**;
- add cross-references to other ReST files;
- use lower case on the section titles, to match other ReST files.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- add a title to the document;
- use :: before verbatim blocks;
- add blank lines where required;
- use protocol for URL references;
- use a verbatim block for the bugs template;
- add cross references to SecurityBugs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix ReST notation for a bullet item
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Sphinx doesn't like nested tables on the LaTex output.

So, change the table there to be displayed properly at
the PDF output.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- Fix document section markups;
- use quote blocks where needed;
- adjust spaces and blank lines;
- add it to the development-processs book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- Fix document title;
- use quote blocks where needed;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Probably, unicode is something that we might remove from the
docs, as all modern systems support it. Yet, this chapter
is fun, as it mentions support for the Klington fictional
charset ;)

On the other hand, I bet all other OS user manuals
explicit mention unicode support.

So, convert it to ReST and include it at the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- Fix document title;
- use a table for the valid commands;
- use quote blocks where needed;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- Fix document title;
- use quote blocks where needed;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- Fix document title;
- use quote blocks where needed;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- Add a document title;
- use quote blocks where needed;
- convert parameters to a nested table;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- replace _foo_ by **foo**;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- Add a document title;
- use .. note:: markup;
- use quote blocks where needed;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- replace _foo_ by **foo**;
- while here, remove whitespaces at the end of paragraph;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- Fix document title;
- use quote blocks where needed;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- Fix document title;
- use quote blocks where needed;
- use .. note:: for notes;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- Fix identatio for the document title;
- remove its index;
- create a table for hash algorithm to be used;
- use quote blocks where needed;
- use monotonic fonts for parameters;
- adjust whitespaces and blank lines;
- Fix case on section titles;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- add a title for the document;
- convert some parameters to tables;
- use quote blocks where needed;
- use monotonic fonts for parameters;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- add a title for the document;
- convert the table;
- use quote block for the changelog;
- use monotonic fonts for file names;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- use a quote blocks where needed;
- use ``foo`` for monotonic;
- adjust whitespaces and blank lines;
- fix the second list (that starts with 0, instead of A)
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- use a quote blocks where needed;
- fix the chapter/section/subsection markups;
- use ``foo`` for monotonic;
- use .. note:: for /sbin/init file permissions;
- adjust whitespaces and blank lines;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

- use a quote blocks where needed;
- fix the chapter/section/subsection markups;
- use ``foo`` for monotonic;
- use .. note:: for the line-range note;
- cleanup whitespaces;
- add it to the user's book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>