- 09 Oct, 2007 33 commits
-
-
Chuck Lever authored
Clone separate connect worker functions for connecting AF_INET6 sockets. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Prepare for introduction of IPv6 versions of same. Signed-off-by:
-
Chuck Lever authored
Finishing a socket connect is the same for IPv4 and IPv6, so split it out into a helper. Signed-off-by:
-
Chuck Lever authored
Clone xs_bindresvport into two functions, one that can handle IPv4 addresses, and one that can handle IPv6 addresses. Signed-off-by:
-
Chuck Lever authored
Prepare for introduction of IPv6-specific socket bind function. Signed-off-by:
-
Chuck Lever authored
We could clone xs_set_port, but this is easier overall. Signed-off-by:
-
Chuck Lever authored
Prepare for adding IPv6 support to the RPC client by adding IPv6 capabilities to rpcbind. Note that this is support on the query side only; registering IPv6 addresses with the local portmapper will come later. Note we have to take care not to fall back to using version 2 of the rpcbind protocol if we're dealing with IPv6 address. Version 2 doesn't support IPv6 at all. Signed-off-by:
-
Chuck Lever authored
Clone xs_format_ipv4_peer_addresses into an IPv6 version. Signed-off-by:
-
Chuck Lever authored
Prepare to add an IPv6 version of xs_format_peer_addresses by renaming it to xs_format_ipv4_peer_addresses. Signed-off-by:
-
Chuck Lever authored
Add support for the NFS client's need to export volume information with IP addresses formatted in hex instead of decimal. This isn't used yet, but subsequent patches (not in this series) will change the NFS client to use this functionality. Signed-off-by:
-
Chuck Lever authored
Use more generic logic to free buffers holding formatted addresses. This makes it less likely a bug will be introduced when adding additional buffer types in xs_format_peer_address(). Signed-off-by:
-
Chuck Lever authored
include/linux/kernel.h gives us some nice macros for formatting IP addresses. Use them. Signed-off-by:
-
Chuck Lever authored
Signed-off-by:
-
Chuck Lever authored
Signed-off-by:
-
Jeff Layton authored
A minor thing, but useful when working with a server with multiple addrs. This looks like it might also be necessary if Miklos' effort to eliminate /etc/mtab ever comes to fruition. When displaying mount options in /proc/mounts, the kernel prints "addr=hostname". This info is redundant since we already have the hostname displayed as part of the "device" section of the mount. This patch changes it to display the IP address to which the socket is connected. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
no need to set up foo-objs these days. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Fabio Olive Leite authored
I would like to discuss the idea that the current checks for attribute timeout using time_after are inadequate for 32bit architectures, since time_after works correctly only when the two timestamps being compared are within 2^31 jiffies of each other. The signed overflow caused by comparing values more than 2^31 jiffies apart will flip the result, causing incorrect assumptions of validity. 2^31 jiffies is a fairly large period of time (~25 days) when compared to the lifetime of most kernel data structures, but for long lived NFS mounts that can sit idle for months (think that for some reason autofs cannot be used), it is easy to compare inode attribute timestamps with very disparate or even bogus values (as in when jiffies have wrapped many times, where the comparison doesn't even make sense). Currently the code tests for attribute timeout by simply adding the desired amount of jiffies to the stored timestamp and comparing that with the current timestamp of obtained attribute data with time_after. This is incorrect, as it returns true for the desired timeout period and another full 2^31 range of jiffies. In testing with artificial jumps (several small jumps, not one big crank) of the jiffies I was able to reproduce a problem found in a server with very long lived NFS mounts, where attributes would not be refreshed even after touching files and directories in the server: Initial uptime: 03:42:01 up 6 min, 0 users, load average: 0.01, 0.12, 0.07 NFS volume is mounted and time is advanced: 03:38:09 up 25 days, 2 min, 0 users, load average: 1.22, 1.05, 1.08 # ls -l /local/A/foo/bar /nfs/A/foo/bar -rw-r--r-- 1 root root 0 Dec 17 03:38 /local/A/foo/bar -rw-r--r-- 1 root root 0 Nov 22 00:36 /nfs/A/foo/bar # touch /local/A/foo/bar # ls -l /local/A/foo/bar /nfs/A/foo/bar -rw-r--r-- 1 root root 0 Dec 17 03:47 /local/A/foo/bar -rw-r--r-- 1 root root 0 Nov 22 00:36 /nfs/A/foo/bar We can see the local mtime is updated, but the NFS mount still shows the old value. The patch below makes it work: Initial setup... 07:11:02 up 25 days, 1 min, 0 users, load average: 0.15, 0.03, 0.04 # ls -l /local/A/foo/bar /nfs/A/foo/bar -rw-r--r-- 1 root root 0 Jan 11 07:11 /local/A/foo/bar -rw-r--r-- 1 root root 0 Jan 11 07:11 /nfs/A/foo/bar # touch /local/A/foo/bar # ls -l /local/A/foo/bar /nfs/A/foo/bar -rw-r--r-- 1 root root 0 Jan 11 07:14 /local/A/foo/bar -rw-r--r-- 1 root root 0 Jan 11 07:14 /nfs/A/foo/bar Signed-off-by:
Fabio Olive Leite <fleite@redhat.com> Signed-off-by:
-
Peter Staubach authored
Hi. Attached is a patch to modify the NFS client code to support 64 bit ino's, as appropriate for the system and the NFS protocol version. The code basically just expand the NFS interfaces for routines which handle ino's from using ino_t to u64 and then uses the fileid in the nfs_inode instead of i_ino in the inode. The code paths that were updated are in the getattr method and the readdir methods. This should be no real change on 64 bit platforms. Since the ino_t is an unsigned long, it would already be 64 bits wide. Thanx... ps Signed-off-by:Peter Staubach <staubach@redhat.com> Signed-off-by:
-
Trond Myklebust authored
This will allow rpc.gssd to use inotify instead of dnotify in order to locate new rpc upcall pipes. This also requires the exporting of __audit_inode_child(), which is used by fsnotify_create() and fsnotify_mkdir(). Ccing David Woodhouse. Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: -
Trond Myklebust authored
This helps prevent huge queues of background writes from building up whenever the server runs out of disk or quota space, or if someone changes the file access modes behind our backs. Signed-off-by: -
Trond Myklebust authored
Schedule writes using WB_SYNC_NONE first, then come back for a second pass using WB_SYNC_ALL. Signed-off-by: -
Trond Myklebust authored
The only user of nfs_sync_mapping_range() is nfs_getattr(), which uses it to flush out the entire inode without sending a commit. We therefore replace nfs_sync_mapping_range with a more appropriate helper. Signed-off-by: -
Trond Myklebust authored
The only user of this field was NFS. Signed-off-by: -
Trond Myklebust authored
Just call write_cache_pages directly instead of hacking the writeback control structure in order to find out if we were called from writepages() or directly from the VM. Signed-off-by: -
Trond Myklebust authored
The addition of nfs_page_mkwrite means that We should no longer need to create requests inside nfs_writepage() Signed-off-by: -
Trond Myklebust authored
This is needed in order to set up a proper nfs_page request for mmapped files. Signed-off-by: -
Linus Torvalds authored
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Au1000: set the PCI controller IO base [MIPS] Alchemy: Fix USB initialization. [MIPS] IP32: Fix fatal typo in address computation.
-
Trond Myklebust authored
The recent fix for a circular lock dependency unfortunately introduced a potential memory leak in the event where the call to nlmsvc_lookup_host fails for some reason. Thanks to Roel Kluin for spotting this. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jeff Garzik authored
The recent mv_fill_sg() rewrite, to fix a data corruption problem related to IOMMU virtual merging, forgot to account for the potentially-increased size of the scatter/gather table after its run. Additionally, the DMA boundary is reduced from 0xffffffff to 0xffff to more closely match the needs of mv_fill_sg(). Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Florian Fainelli authored
The PCI controller IO base was not set in the au1000 pci code. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
John Crispin <blogic@openwrt.org> Signed-off-by:
Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Florian Fainelli authored
This patch fixes a wrong ifdef in the board setup code, leading to the GPIO pin not being pulled high, and thus the USB switch not being powered at all. This finishes the rename of CONFIG_USB_OHCI to CONFIG_USB_OHCI_HCD, which started in 2005 (before 2.6.12-rc2), then probably because things were working anyway for most people got forgotten. [Ralf: Paolo's original patch didn't fix the module case, Florian's patch only fixed MTX1 etc. so this is a combined patch plus some cleanups.] Cc: Giuseppe Patanè <giuseppe.patane@tvblob.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Giuseppe Sacco authored
Signed-off-by:
Giuseppe Sacco <eppesuig@debian.org> Signed-off-by:
-
- 08 Oct, 2007 7 commits
-
-
Maarten Bressers authored
When building a custom keymap, after setting GENERATE_KEYMAP := 1 in drivers/char/Makefile, the kernel build fails like this: CC drivers/char/vt.o make[2]: *** No rule to make target `drivers/char/%.map', needed by `drivers/char/defkeymap.c'. Stop. make[1]: *** [drivers/char] Error 2 make: *** [drivers] Error 2 This was caused by commit af8b1287, which deleted a necessary colon from the Makefile rule that generates the keymap, since that rule contains both a target and a target-pattern. The following patch puts the colon back: Signed-off-by:Maarten Bressers <mbres@gentoo.org> Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Karsten Keil authored
Fix against access random data bytes outside the dev->chanmap array. Thanks to Oliver Neukum for pointing me to this issue. Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPv6]: Fix ICMPv6 redirect handling with target multicast address [PKT_SCHED] cls_u32: error code isn't been propogated properly [ROSE]: Fix rose.ko oops on unload [TCP]: Fix fastpath_cnt_hint when GSO skb is partially ACKed
-
Yan Zheng authored
When IOCB_FLAG_RESFD flag is set and iocb->aio_resfd is incorrect, statement 'goto out_put_req' is executed. At label 'out_put_req', aio_put_req(..) is called, which requires 'req->ki_filp' set. Signed-off-by: Yan Zheng<yanzheng@21cn.com> Cc: Zach Brown <zach.brown@oracle.com> Signed-off-by:
-
Yan Zheng authored
find_lock_page increases page's usage count, we should decrease it before return VM_FAULT_SIGBUS Signed-off-by: Yan Zheng<yanzheng@21cn.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Yan Zheng authored
The test for VM_CAN_NONLINEAR always fails Signed-off-by: Yan Zheng<yanzheng@21cn.com> Signed-off-by:
-
Peter Zijlstra authored
All the current page_mkwrite() implementations also set the page dirty. Which results in the set_page_dirty_balance() call to _not_ call balance, because the page is already found dirty. This allows us to dirty a _lot_ of pages without ever hitting balance_dirty_pages(). Not good (tm). Force a balance call if ->page_mkwrite() was successful. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
