- 04 Sep, 2020 1 commit
-
-
Krzysztof Kozlowski authored
Usage of "unevaluatedProperties: false" is not correct as it suppresses warnings about all undocumented properties. Instead, add all missing properties. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200903203250.19830-1-krzk@kernel.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 03 Sep, 2020 2 commits
-
-
Shengjiu Wang authored
Transmit data pins will output zero when slots are masked or channels are disabled. In CHMOD TDM mode, transmit data pins are tri-stated when slots are masked or channels are disabled. When data pins are tri-stated, there is noise on some channels when FS clock value is high and data is read while fsclk is transitioning from high to low. Signed-off-by:
Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/1599112427-22038-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
One data channel is one data line. From imx7ulp, the SAI IP is enhanced to support multiple data channels. If there is only two channels input and slots is 2, then enable one data channel is enough for data transfer. So enable the TCE/RCE and transmit/receive mask register according to the input channels and slots configuration. Move the data channel enablement from startup() to hw_params(). Signed-off-by:
-
- 01 Sep, 2020 4 commits
-
-
Krzysztof Kozlowski authored
Additional properties or nodes actually might appear (e.g. assigned-clocks) so use unevaluatedProperties to fix dtbs_check warnings like: arch/arm/boot/dts/exynos5422-odroidxu3.dt.yaml: sound: 'assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20200830112633.6732-2-krzk@kernel.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The "sound-dai" property has cells therefore phandle-array should be used, even if it is just one phandle. This fixes dtbs_check warnings like: arch/arm/boot/dts/exynos4412-trats2.dt.yaml: sound: cpu:sound-dai:0:1: missing phandle tag in 0 arch/arm/boot/dts/exynos4412-trats2.dt.yaml: sound: cpu:sound-dai:0: [158, 0] is too long Signed-off-by:
-
Krzysztof Kozlowski authored
Additional properties actually might appear (e.g. power-domains) so use unevaluatedProperties to fix dtbs_check warnings like: arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml: i2s@11440000: Additional properties are not allowed ('power-domains', '#address-cells', 'interrupts', '#size-cells' were unexpected) Signed-off-by: -
Douglas Anderson authored
The probe of rt5682 is pretty slow. A quick measurement shows that it takes ~650 ms on at least one board. There's no reason to block all other drivers waiting for this probe to finish. Set the flag to allow other drivers to probe while we're probing. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200828162005.1.I4f67f494c4f759b0e5c7f487e040dfdcf16e0876@changeidSigned-off-by:
-
- 28 Aug, 2020 2 commits
-
-
Dan Murphy authored
Add the audio routing map to enable the digital mic paths when the analog mic paths are not enabled. Signed-off-by:
Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200828112855.10112-1-dmurphy@ti.comSigned-off-by:
-
Dmitry Baryshkov authored
Current fmt_single_name code limits maximum name of a DAI or component to 32 bytes. On some systems corresponding device names might be longer than that (e.g. 17300000.remoteproc:glink-edge:apr:apr-service@8:routing). This will result in duplicate DAI/component names. Rewrite fmt_single_name() to remove such length limitations. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20200827205100.1479331-1-dmitry.baryshkov@linaro.orgSigned-off-by:
-
- 27 Aug, 2020 12 commits
-
-
Mark Brown authored
Merge series "SOF fixes and updates for FW boot" from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>: This series includes fixes and updates for the FW boot sequence for Intel platforms. Ranjani Sridharan (7): ALSA: hda: fix VS_LTRC register name ASoC: SOF: Intel: hda: Add helper function to program ICCMAX stream ASoC: SOF: Intel: hda: modify the signature of get_stream_with_tag() ASoC: SOF: Intel: hda: define macro for code loader stream format ASoC: SOF: Intel: hda: Define FW boot sequence with ICCMAX ASoC: SOF: Intel: hda: Add sof_tgl_ops for TGL platforms ASoC: SOF: Intel: hda: Simplify error handling during FW boot Yong Zhi (1): ASoC: SOF: Intel: hda: Remove unused parameters in cl_dsp_init() include/sound/hda_register.h | 2 +- sound/soc/sof/intel/Makefile | 2 +- sound/soc/sof/intel/cnl.c | 23 +---- sound/soc/sof/intel/hda-ipc.h | 4 + sound/soc/sof/intel/hda-loader.c | 145 ++++++++++++++++++------------- sound/soc/sof/intel/hda-stream.c | 69 +++++++++++++++ sound/soc/sof/intel/hda.h | 6 ++ sound/soc/sof/intel/tgl.c | 137 +++++++++++++++++++++++++++++ sound/soc/sof/sof-pci-dev.c | 2 +- 9 files changed, 306 insertions(+), 84 deletions(-) create mode 100644 sound/soc/sof/intel/tgl.c -- 2.25.1
-
Kuninori Morimoto authored
commit 25612477 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper") added snd_soc_dai_link_set_capabilities(). But it is using snd_soc_find_dai() (A) which is required client_mutex (B). And client_mutex is soc-core.c local. struct snd_soc_dai *snd_soc_find_dai(xxx) { ... (B) lockdep_assert_held(&client_mutex); ... } void snd_soc_dai_link_set_capabilities(xxx) { ... for_each_pcm_streams(direction) { ... for_each_link_cpus(dai_link, i, cpu) { (A) dai = snd_soc_find_dai(cpu); ... } ... for_each_link_codecs(dai_link, i, codec) { (A) dai = snd_soc_find_dai(codec); ... } } ... } Because of these background, we will get WARNING if .config has CONFIG_LOCKDEP. WARNING: CPU: 2 PID: 53 at sound/soc/soc-core.c:814 snd_soc_find_dai+0xf8/0x100 CPU: 2 PID: 53 Comm: kworker/2:1 Not tainted 5.7.0-rc1+ #328 Hardware name: Renesas H3ULCB Kingfisher board based on r8a77951 (DT) Workqueue: events deferred_probe_work_func pstate: 60000005 (nZCv daif -PAN -UAO) pc : snd_soc_find_dai+0xf8/0x100 lr : snd_soc_find_dai+0xf4/0x100 ... Call trace: snd_soc_find_dai+0xf8/0x100 snd_soc_dai_link_set_capabilities+0xa0/0x16c graph_dai_link_of_dpcm+0x390/0x3c0 graph_for_each_link+0x134/0x200 graph_probe+0x144/0x230 platform_drv_probe+0x5c/0xb0 really_probe+0xe4/0x430 driver_probe_device+0x60/0xf4 snd_soc_find_dai() will be used from (X) CPU/Codec/Platform driver with mutex lock, and (Y) Card driver without mutex lock. This snd_soc_dai_link_set_capabilities() is for Card driver, this means called without mutex. This patch adds snd_soc_find_dai_with_mutex() to solve it. Fixes: 25612477 ("ASoC: soc-dai: set dai_link dpcm_ flags with a helper") Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87blixvuab.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Pavel Dobias authored
Changing filter type without disabling codec results in filter malfunction. Disable codec when changing filter type. Signed-off-by:
Pavel Dobias <dobias@2n.cz> Link: https://lore.kernel.org/r/20200827102528.29677-1-dobias@2n.czSigned-off-by:
-
Akshu Agrawal authored
While the driver waits for DAIs to be probed and retries probing, have the error messages at debug level instead of error. Signed-off-by:
Akshu Agrawal <akshu.agrawal@amd.com> Link: https://lore.kernel.org/r/20200826185454.5545-1-akshu.agrawal@amd.comSigned-off-by:
-
Ranjani Sridharan authored
Modify cl_stream_prepare() to return a pointer to the prepared stream if successful or ERR_PTR() otherwise. This would simplify the error paths in hda_dsp_cl_boot_firmware() and hda_dsp_cl_boot_firmware_iccmax() to perform the stream cleanup after FW boot. This change also renders the function get_stream_with_tag() redundant. Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20200826184532.1612070-9-ranjani.sridharan@linux.intel.comSigned-off-by:
-
Ranjani Sridharan authored
Separate the dsp ops for TGL ops to specify the use of ICCMAX FW boot sequence in the run op. All other ops are identical. Also separate the TGL descriptors into a separate file to make it easier to follow. Reviewed-by:
-
Ranjani Sridharan authored
Define the FW boot sequence for platforms that are recommended to use ICCMAX. This function uses the existing prepare and cleanup functions for creating a specially crafted capture stream before powering up the DSP cores. Reviewed-by:
-
Ranjani Sridharan authored
This will be used for the ICCMAX stream as well. Reviewed-by:
-
Ranjani Sridharan authored
Modify the signature of get_stream_with_tag() to add the direction as an argument to extend it for using with capture streams. Reviewed-by:
-
Ranjani Sridharan authored
For some platforms, the recommended HW sequence for FW boot involves starting a specially crafted capture stream before powering on the DSP cores. Add a helper function to define the minimal recommended stream programming sequence for this stream. Reviewed-by:
-
Yong Zhi authored
cl_dsp_init() doesn't use the fwdata and fwsize parameters. Remove it, and update caller accordingly. Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Reviewed-by:
-
Ranjani Sridharan authored
It should be called VS_LTRP instead. Reviewed-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200826184532.1612070-2-ranjani.sridharan@linux.intel.comSigned-off-by:
-
- 26 Aug, 2020 12 commits
-
-
Mark Brown authored
This series includes fixes for error reporting, topology parsing and runtime PM issues along with updates for DMIC support and IMX platforms. Iulian Olaru (2): ASoC: SOF: imx: Replace sdev->private with sdev->pdata->hw_pdata ASoC: SOF: sof-of-dev: Add .arch_ops field Jaska Uimonen (1): ASoC: SOF: intel: hda: support also devices with 1 and 3 dmics Keyon Jie (1): ASoC: SOF: topology: fix the ipc_size calculation for process component Rander Wang (1): ASoC: SOF: fix a runtime pm issue in SOF when HDMI codec doesn't work Ranjani Sridharan (2): ASoC: SOF: Intel: hda: report error only for the last ROM init iteration ASoC: SOF: Intel: hda: add extended rom status dump to error log sound/soc/sof/imx/Kconfig | 2 ++ sound/soc/sof/imx/imx8.c | 17 +++++++++---- sound/soc/sof/imx/imx8m.c | 10 +++++--- sound/soc/sof/intel/hda-codec.c | 4 +-- sound/soc/sof/intel/hda-loader.c | 42 +++++++++++++++++++------------- sound/soc/sof/intel/hda.c | 26 +++++++++++++++++++- sound/soc/sof/topology.c | 4 +-- 7 files changed, 74 insertions(+), 31 deletions(-) -- 2.25.1 -
Iulian Olaru authored
Add .arch_ops field in the sof_imx8x_ops structure. The inclusion of this field will allow the usage of functions from sof/core.c in order to print debug information such as the registers and a stack dump in case of a firmware ops. The SND_SOC_SOF_XTENSA is added in the imx/Kconfig file so the compilation is successful. Signed-off-by:
Iulian Olaru <iulianolaru249@yahoo.com> Reviewed-by:
Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by:
-
Iulian Olaru authored
The correct way to save private data is to use sdev->pdata->hw_pdata. Removed superfluous type-casts. Signed-off-by:
-
Ranjani Sridharan authored
Dump the extended ROM status information to the error logs to aid with remote support. The analysis of these logs requires access to non-public technical information. Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Jaska Uimonen <jaska.uimonen@intel.com> Signed-off-by:
-
Keyon Jie authored
The topology private struct is used for token parsing and its size should not be included to the ipc_size, fix it here though it didn't cause any real issue as the Firmware won't use this wrong-added data. Signed-off-by:
Keyon Jie <yang.jie@linux.intel.com> Reviewed-by:
-
Jaska Uimonen authored
Currently the dmic check code supports only devices with 2 or 4 dmics. With other dmic counts the function will return 0. Lately we've seen devices with only 1 dmic thus enable also configurations with 1, and possibly 3, dmics. Add also topology postfix -1ch and -3ch for new dmic configuration. Signed-off-by:
Jaska Uimonen <jaska.uimonen@linux.intel.com> Reviewed-by:
-
Rander Wang authored
When hda_codec_probe() doesn't initialize audio component, we disable the codec and keep going. However,the resources are not released. The child_count of SOF device is increased in snd_hdac_ext_bus_device_init but is not decrease in error case, so SOF can't get suspended. snd_hdac_ext_bus_device_exit will be invoked in HDA framework if it gets a error. Now copy this behavior to release resources and decrease SOF device child_count to release SOF device. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
-
Ranjani Sridharan authored
The FW boot sequence includes multiple attempts for ROM init. When it does take more than one attempt, we should not log the errors encountered during the failed attempts and only log them during the final iteration. Reviewed-by:
-
Iulian Olaru authored
This patch adds an IPC initiated debug box region in the snd_sof_dev structure, defined in soc/sof/sof-priv.h. It is initialized at loading, in the sof_get_windows function from soc/sof/loader.c, in a similar manner with the stream box and host box. This region is useful because the firmware will put an error message here so the kernel can read it in case of a dsp oops. Signed-off-by:
-
Karol Trzcinski authored
The debug ABI can be extracted from the extended manifest content. This information known at build time does not need to be provided in a mailbox. Signed-off-by:
Karol Trzcinski <karolx.trzcinski@linux.intel.com> Reviewed-by:
-
Pierre-Louis Bossart authored
sdev->info_window is allocated with kmemdup and never freed, use devm_ version since this is only used for first boot. Fixes: 8d809c15 ('ASoC: SOF: ext_manifest: parse windows') Cc: Karol Trzcinski <karolx.trzcinski@linux.intel.com> Signed-off-by:
Rander Wang <rander.wang@linux.intel.com> Reviewed-by:
-
Karol Trzcinski authored
This step is needed to add possibility to pack sof_ipc_window inside another one in used FW build tools - for example in extended manifest. Structure reusability leads to easy parsing function reuse, so source code is shorter and easier to maintain. Using structures with constant size is less tricky and properly supported by each toolchain by contrast to variable size elements. This is minor ABI change - backward compatibility is kept. Signed-off-by:
-
- 25 Aug, 2020 7 commits
-
-
Mark Brown authored
Merge series "ASoC: SOF: trivial code/log/comment improvements" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Remove useless variable initialization and allocation, adjust log levels to make support easier, and fix comments. No functional changes. Guennadi Liakhovetski (2): ASoC: SOF: topology: (cosmetic) remove redundant variable initialisations ASoC: SOF: (cosmetic) use the "bool" type where it makes sense Pierre-Louis Bossart (4): ASoC: SOF: IPC: reduce verbosity of IPC pointer updates ASoC: SOF: acpi: add dev_dbg() log for probe completion ASoC: SOF: Intel: add dev_dbg log when driver is not selected ASoC: Intel: use consistent HDAudio spelling in comments/docs Ranjani Sridharan (2): ASoC: SOF: topology: remove unnecessary memory alloc for sdev->private ASoC: SOF: topology: reduce the log level for unhandled widgets include/sound/soc-acpi.h | 2 +- sound/soc/intel/Kconfig | 2 +- sound/soc/intel/skylake/skl.c | 6 +++--- sound/soc/sof/Kconfig | 2 +- sound/soc/sof/intel/Kconfig | 2 +- sound/soc/sof/ipc.c | 16 +++++++++++----- sound/soc/sof/pcm.c | 8 ++++---- sound/soc/sof/sof-acpi-dev.c | 2 ++ sound/soc/sof/sof-pci-dev.c | 6 +++--- sound/soc/sof/sof-priv.h | 10 +++++----- sound/soc/sof/topology.c | 20 ++++---------------- 11 files changed, 36 insertions(+), 40 deletions(-) base-commit: aafdeba5 -- 2.25.1 -
Dan Carpenter authored
The ARRAY_SIZE() is the number of the elements but we want to use the number of bytes. Fortunately, in this case the value is the same so it doesn't affect runtime. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200825104623.GA278587@mwandaSigned-off-by:
-
Pierre-Louis Bossart authored
We use HDaudio and HDAudio, pick one to make searches easier. No functionality change Reported-by:
-
Pierre-Louis Bossart authored
Mirror change suggested in legacy HDaudio driver. On SKL+ Intel platforms, the driver selection is handled by the snd_intel_dspcfg, and when the HDaudio legacy driver is not selected, be it with the auto-selection or user preferences with a kernel parameter, the probe aborts with no logs, only a -ENODEV return value. Having no dmesg trace, even with dynamic debug enabled, makes support more complicated than it needs to be, and even experienced users can be fooled. A simple dev_dbg() trace solves this problem. BugLink: https://github.com/thesofproject/linux/issues/2330Reviewed-by:
-
Pierre-Louis Bossart authored
When the probe relies on a workqueue, the completion is not signaled by a return value. Mirror the log already present for PCI probe, so that CI checks can test if the probe actually worked by filtering the console logs. Reviewed-by:
-
Pierre-Louis Bossart authored
When using dynamic debug, the console is swamped with verbose position pointer logs, which really don't add much information. Move then to vdbg to keep traces usable and allow for easier end-user support. Reviewed-by:
-
Ranjani Sridharan authored
Virtual widgets are added to topology to be compatible with legacy machine drivers. Reduce the log level for messages printed when such widgets are ignored by the SOF driver. Reviewed-by:
-
