- 11 Mar, 2016 40 commits
-
-
Dennis Dalessandro authored
Implement get_card_name and get_pci_dev helper functions for rdmavt for qib. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Dennis Dalessandro authored
In preparation for moving the queue pair data structure to rdmavt the members of the driver specific queue pairs which are not common need to be pushed off to a private driver structure. This structure will be available in the queue pair once moved to rdmavt as a void pointer. This patch while not adding a lot of value in and of itself is a prerequisite to move the queue pair out of the drivers and into rdmavt. The driver specific, private queue pair data structure should condense as more of the send side code moves to rdmavt. Reviewed-by:
-
Dennis Dalessandro authored
Original patch for AH changes from Kamal Heib <kamalh@mellanox.com>, split apart from original. This patch also removes the qib specific multicast lid base and permissive lid defines since they are no longer needed. Use common LID defines in qib driver. Reviewed-by:
Kamal Heib <kamalh@mellanox.com> Signed-off-by:
-
Dennis Dalessandro authored
This patch removes most of the uses of QIB_PERMISSIBVE_LID and QIB_MULTICAST_LID_BASE in favor of the recently added IB_* versions. There are still minor uses in AH functions as well as the QIB_* defines but those will be removed in a follow on patch. Reviewed-by:
-
Dennis Dalessandro authored
Remove protection domain datastructure from qib and use rdmavts version. Reviewed-by:
-
Dennis Dalessandro authored
This patch removes the qib_dma.c file and uses the version which has been added to rdmavt. Reviewed-by:
-
Dennis Dalessandro authored
This patch begins to make use of rdmavt by registering with it and providing access to the header files. This is just the beginning of rdmavt support in qib. Most functionality is still being done in the driver, set flags so that rdmavt will let qib continue to handle mr, qp, and cq init. Reviewed-by:
-
Dennis Dalessandro authored
Add pkey table in rdi per port data structure. Also bring in related pkey functions. Drivers will still be responsible for allocating and maintaining the pkey table. However they need to tell rdmavt where to find the pkey table. We can not move the pkey table up into rdmavt because drivers need to manipulate this long before registering with it. Reviewed-by:
-
Dennis Dalessandro authored
The mmap data structure was moved in a previous commit. This patch now pulls in the related functions. Reviewed-by:
-
Dennis Dalessandro authored
Add table init as well as teardown for handling qpn maps. Drivers can still provide this functionality by setting the QP_INIT_DRIVER bit. Reviewed-by:
-
Dennis Dalessandro authored
Until all functionality is moved over to rdmavt drivers still need to access a number of fields in data structures that are predominantly meant to be used by rdmavt. Once these rdmavt_<ibta_object>.h header files are no longer being touched by drivers their content should be moved to rdmavt/<ibta_object>.h. While here move a couple #defines over to more general IB verbs header files because they fit better. Reviewed-by:
-
Dennis Dalessandro authored
Drivers may need to do some work once an address handle has been created. Add a driver function for this purpose. Reviewed-by:
Harish Chegondi <harish.chegondi@intel.com> Signed-off-by:
-
Dennis Dalessandro authored
Converge the ibport data structures of qib and hfi1 into a common ib port structure. Also provides a place to keep track of these ports in case rdmavt needs it. Along with this goes an attach and detach function for drivers to use to notify rdmavt of the ports. Reviewed-by:
-
Dennis Dalessandro authored
Patch moves the srq data structure into rdmavt in preparation for removal from qib and hfi1 which will follow in subsequent patches. Reviewed-by:
-
Kamal Heib authored
Original patch is from Kamal Heib <kamalh@mellanox.com>. It has been split into three separate patches. This one for rdmavt, a follow on for qib, and one for hfi1. Create datastructure for address handle and implement the create/destroy/modify/query of address handle for rdmavt. Reviewed-by:
-
Kamal Heib authored
Original patch is from Kamal Heib <kamalh@mellanox.com>. It has been split into separate patches. This patch adds RVT_PERMISSIVE_LID and RVT_MULTICAST_LID_BASE to rdmavt. Reviewed-by:
-
Dennis Dalessandro authored
Trying to print debug and error messages with the rdmavt helpers will not work out so well if the drivers have not provided the get_card and get pci functions. Use the normal pr_error instead until we can check this. Reviewed-by:
-
Dennis Dalessandro authored
Use the memory registration routines in hfi1 and move them to rdmavt. A follow on patch will address removing the duplicated code in the hfi1 and qib drivers. Reviewed-by:
-
Dennis Dalessandro authored
Drivers will need a set of flags to dictate behavior to rdmavt. This patch adds a placeholder and a spot for it to live, as well as a few flags that will be used. Reviewed-by:
-
Dennis Dalessandro authored
Follow hfi1's example for printing information about the driver and incorporate into rdmavt. This requires two new functions to be provided by the driver, one to get_card_name and one to get_pci_dev. Reviewed-by:
-
Dennis Dalessandro authored
Drivers are going to need to provide multiple functions for rdmavt to call in to. We already have one, so go ahead and push this into a data structure designated for driver supplied functions. Reviewed-by:
-
Dennis Dalessandro authored
Add queue pair data structure as well as supporting structures to rdmavt. Reviewed-by:
-
Dennis Dalessandro authored
This patch adds the MR datastructures based on hfi1 into rvt. For now the data structures are defined in include/rdma/rdma_vt.h but once all MR functionality has been moved from the drivers into rvt these should move to rdmavt/mr.h Reviewed-by:
Dean Luick <dean.luick@intel.com> Reviewed-by:
-
Dennis Dalessandro authored
This adds the post sned and recv function stubs. Reviewed-by:
-
Dennis Dalessandro authored
Create stubs for completion queue creation, polling, resizing, calling for notification, and destroying. Reviewed-by:
-
Dennis Dalessandro authored
This adds the get port immutable verbs call. Reviewed-by:
-
Dennis Dalessandro authored
Adds the stub for the mmap verbs call. Reviewed-by:
-
Dennis Dalessandro authored
This adds the stub for process mad. More study is needed to determine the final MAD interaction between the driver and rvt. Reviewed-by:
-
Dennis Dalessandro authored
Adds the function stubs for attach and detach multicast. Reviewed-by:
-
Dennis Dalessandro authored
Adds the stubs for create, modify, query, and destory for shared request queues. Reviewed-by:
-
Dennis Dalessandro authored
Adds the function stubs for allocating, and registering memory regions, as well as deregistering them. Reviewed-by:
-
Dennis Dalessandro authored
Adds the stubs for create, destroy, modify, and query of the address handle. Reviewed-by:
-
Dennis Dalessandro authored
Adds the stubs for create, modify, destroy and query functions for queue pairs. Reviewed-by:
-
Dennis Dalessandro authored
Add the stubs to allocate and deallocate user contexts. This will be handled completely by rvt. Reviewed-by:
-
Dennis Dalessandro authored
The handler for query gid operates along the same lines as the query pkey handler. The driver will take care to keep the guid table updated. Reviewed-by:
-
Dennis Dalessandro authored
The pkey table will reside in the rvt structure but it will be modified only when the driver requests then rvt will simply read the value to return in the query. Reviewed-by:
-
Dennis Dalessandro authored
This patch adds the query and modify port stubs. The query will mostly entail the driver returning everything in the ib_port_attr which will get handed back to the verbs layer. The modify will need some API helpers in the driver. The send_trap and post_mad_send are still issues to address. Reviewed-by:
-
Dennis Dalessandro authored
Adds the stubs which will handle the query and modify device functions. At this time the only intention is to support changing the node desc and the guid via these calls. Reviewed-by:
-
Dennis Dalessandro authored
Add a macro to cut down on writing the same lines over and over again for what will be a large number of functions that will be supported. Reviewed-by:
-
Dennis Dalessandro authored
Instead of trying to handle each parameter separately, add ib_device_attr to rvt_driver_params. This means drivers will fill this in and pass to the rvt registration function. Reviewed-by:
-
