- 26 Mar, 2008 40 commits
-
-
Daniel Lezcano authored
Make use of the network namespace information to have this protocol to handle several network namespace. Signed-off-by:
Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by:
Benjamin Thery <benjamin.thery@bull.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
The commits f3db4851 ([NETNS][IPV6] ip6_fib - fib6_clean_all handle several network namespaces) and 69ddb805 ([NETNS][IPV6] route6 - Make proc entry /proc/net/rt6_stats per namespace) made some proc files per net. Both of them introduced potential OOPS - get_proc_net can return NULL, but this check is lost - and a struct net leak - in case single_open() fails the previously got net is not put. Kill all these bugs with one patch. Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Acked-by:
-
Allan Stephens authored
This patch eliminates an unnecessary poll-related routine by merging it into TIPC's main polling routine, and updates the comments associated with this code. Signed-off-by:
Allan Stephens <allan.stephens@windriver.com> Signed-off-by:
-
Pavel Emelyanov authored
Currently each vlan_groupd contains 8 pointers on arrays with 512 pointers on struct net_device each :) Such a construction "in many cases ... wastes memory". My proposal is to allow for some of these arrays pointers be NULL, meaning that there are no devices in it. When a new device is added to the vlan_group, the appropriate array is allocated. The check in vlan_group_get_device's is safe, since the pointer vg->vlan_devices_arrays[x] can only switch from NULL to not-NULL. The vlan_group_prealloc_vid() is guarded with rtnl lock and is also safe. I've checked (I hope that) all the places, that use these arrays and found, that the register_vlan_dev is the only place, that can put a vlan device on an empty vlan_group. Rough calculations shows, that after the patch a setup with a single vlan dev (or up to 512 vlans with sequential vids) will occupy approximately 8 times less memory. The question I have is - does this patch makes sense, or a totally new structures are required to store the vlan_devs? Signed-off-by:
Patrick McHardy <kaber@trash.net>
-
Pavel Emelyanov authored
Signed-off-by:
-
Pavel Emelyanov authored
This mostly re-uses the net, used in icmp netnsization patches from Denis. After this ICMP sysctls are completely virtualized. Signed-off-by:
-
Pavel Emelyanov authored
Add some flesh to ipv4_sysctl_init_net and ipv4_sysctl_exit_net, i.e. copy the table, alter .data pointers and register it per-net. Other ipv4_table's sysctls are now global, but this is going to change once sysctl permissions patches migrate from -mm tree to mainline in 2.6.26 merge window :) Signed-off-by:
-
Pavel Emelyanov authored
Initialization is moved to icmp_sk_init, all the places, that refer to them use init_net for now. Signed-off-by:
-
Pavel Emelyanov authored
This includes adding pernet_operations, empty init and exit hooks and a bit of changes in sysctl_ipv4_init just not to have this part in next patches. Signed-off-by:
-
Denis V. Lunev authored
Recent commits from YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> have been introduced a several compilation warnings 'assignment discards qualifiers from pointer target type' due to extra const modifier in the inline call parameters of {dev|sock|twsk}_net_set. Drop it. Signed-off-by:Denis V. Lunev <den@openvz.org> Signed-off-by:
-
Denis V. Lunev authored
Commit commit c346dca1 ([NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS) breaks compilation with CONFIG_NET_NS set. Fix the typo. Signed-off-by:
-
David S. Miller authored
-
Andy Fleming authored
- Fix Rx/Tx HW interrupt coalescing counter reset logic. Disabling is required before resetting the counter. - Update the Default both Rx and Tx coalescing timer threshold. Formerly 4 is set which is equal to 1.5 frame at the line rate of 1GbE interface, and it doesn't match to the coalescing frame count which is set to 16. Threashold 21 is matched to frame count 16. Signed-off-by:
Dai Haruki <dai.haruki@freescale.com> Signed-off-by:
Andy Fleming <afleming@freescale.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Andy Fleming authored
If the LAST bit is not set in the RxBD, it's possible we're processing an incomplete frame, which is bad. While we're at it, add a constant for the error bitmask, so the whole if-clause fits on one line, and is more legible. Signed-off-by:
-
Dai Haruki authored
In gfar_change_mtu(), the frame size needs to be increased to account for the extra 4 bytes VLAN adds to the ethernet header. However, it was being increased by the length of the whole header (18 bytes), which is wrong. Signed-off-by:
-
Dai Haruki authored
- Buffer stashing parameter change to 96 from 64 in order to cover the Layer 4 header. Signed-off-by:
-
Pavel Emelyanov authored
The code opening proc entry for each device makes the same thing, as the single_open does, so remove the unneeded code. Signed-off-by:
-
Anton Vorontsov authored
This patch adds support for BCM5481 PHY. Unfortunately it's hard to get specifications for this PHY, so its special register 0x18 isn't annotated properly (but we know it's used to set up the delays). I've kept the magic numbers, so we'll not forget to fix it at the first opportunity, and will name that register and its bits correctly. p.s. also fixed the line with broken indention, introduced by commit 03157ac3 PHYLIB: Add BCM5482 PHY support Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
-
Marcin Slusarz authored
Convert byte order of constant instead of variable which can be done at compile time (vs run time) Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by:
Ron Mercer <ron.mercer@qlogic.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Julia Lawall authored
Robert P.J. Day proposed to use the macro FIELD_SIZEOF in replace of code that matches its definition. The modification was made using the following semantic patch (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ type t; identifier f; @@ - (sizeof(((t*)0)->f)) + FIELD_SIZEOF(t, f) @depends on haskernel@ type t; identifier f; @@ - sizeof(((t*)0)->f) + FIELD_SIZEOF(t, f) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Florian Fainelli authored
This patch adds support for the IDT rc32434 Ethernet MAC we can find in the IDT boards and the Mikrotik RB500. Driver references some code from the linux-mips RB500 support. Signed-off-by:
Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Philip Rischel <rischelp@idt.com> Signed-off-by:
-
Daniel Drake authored
This timer doesn't need to run at precise times, so round it to a whole second to decrease wakeups. Signed-off-by:
Daniel Drake <dsd@gentoo.org> Signed-off-by:
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
missed read*/write* plus a bunch of wrong-sized ones... Signed-off-by:
-
Al Viro authored
isa_bus_to_virt() is the wrong thing to do here; it happens to work on i386, but only by accident. What we want is normal ioremap/readb/etc. set - it's all in iomem. Signed-off-by:
-
Al Viro authored
take iscp-based testing into helper, kill the loop, stop wanking with reassignments of priv->iscp Signed-off-by:
-
Al Viro authored
* initialize spinlock once * check586() used to be done before we'd allocated ->priv; these days it's there from the very beginning, so we don't have to play with private copy. Consequently, we don't need to mess with reinitializing ->base, etc. afterwards. Signed-off-by:
-
Al Viro authored
... and store the virt address where we map the ->mem_addr, while we are at it. Signed-off-by:
-
Al Viro authored
Passing ISA bus address explicitly cast to char * only to cast it back to unsigned long is dumb; so's passing it at all when it's always dev->mem_start... Signed-off-by:
-
Al Viro authored
unsigned short != u8, it's u16... Signed-off-by:
-
Al Viro authored
Driver is still broken, though; partially from Alan's checkpatch-induced fun, partially from layers of ancient mess ;-) By the end of the series... hell, might be even worth trying to stick such card into old alpha or ppc with an ISA slot and see if it work - would be for the first time ever in case of alpha and for the first time since at least 2.5.3 in case of ppc... Signed-off-by:
-
Jesse Brandeburg authored
ixgb can remove irq_sem by auditing all the call sites to make sure that each of them makes sure the adapter is in the correct state before re-enabling interrupts. after doing this to all of our other drivers it is becoming easier. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by:
-
Jesse Brandeburg authored
irq_sem was just a hack to prevent interrupts from being enabled unexpectedly in deep call paths. Simply finding those call paths and fixing them by hand results in a driver that behaves as we expect and doesn't need the atomic at all. Signed-off-by:
-
Jesse Brandeburg authored
irq_sem can safely be removed by auditing all irq.*able sites to make sure that interrupts don't get enabled unexpectedly when the interface is down. Signed-off-by:
-
Auke Kok authored
This function is no longer used now that 82573 uses the eerd read method as well. Thanks to Adrian Bunk for pointing this out. Signed-off-by:
-
Auke Kok authored
Signed-off-by:
-
