Patch from Ben Dooks

Attached is a copyright / explanation header for the
arch/arm/mach-s3c2410/s3c2410.h header files

Patch from Ben Dooks

A set of default devices for the s3c2410 SoC for
use with the machine(s)

Patch from Dave Jiang

Removed unnecessary parens in patch 2017 per RMK

Patch from Michael Opdenacker

Hello,

platform_device definitions are no longer needed in include/asm-arm/hardware.h:
- platform_add_device no longer exists anywhere else in the whole kernel
- other definitions should be taken from include/linux/device.h instead

The proposed patch removes these definitions.

Cheers,

Michael.

Remove unnecessary checks for addresses > TI_ADDR_LIMIT in
get_user/put_user.  The MMU will catch out of bounds accesses
for us.

Make PREEMPT_ACTIVE use bit 30 not bit 26; this gives extra bits for
hard IRQs.

Delete TIF_USED_FPU - it's unused.

These macros don't take account of which bus is actually required,
so they should not be used in new drivers; in fact, new drivers
should use the DMA API.

Patch from Dave Jiang

Code cleanup. Removed all IOP80310 support. Also some minor compile warning fixups for 80321. Preping for IOP321 and IOP331 code submissions.

CPU masks are now contained within cpumask_t and must be manipulated
with associated functions.

Patch from Ben Dooks

Support for DMA controller on the Samsung S3C2410,
and fixes to the header files for DMA register definitions


Fixes the menuconfig problem from the original patch

Patch from Ben Dooks

This patch adds the following

- demux of the adc/touchscreen irqs
- fix to allow setting of the external irq type

Updated version of 1975/1

Thanks to Roc Wu, and Arnaud Patard for finding and fixing

Patch from Tony Lindgren

Patch from Kevin Hilman to replace old leds-perseus2.c with 
leds-h2p2-debug.c to add leds support for H2.

Patch from Tony Lindgren

Patch removes old OMAP bus. Drivers now use platform_bus

Patch from Tony Lindgren

This patch syncs the mainline kernel with the linux-omap tree.
The highlights of the patch are:
- DMA fixes from Samuel Ortiz
- USB low level configuration from David Brownell
- H3 support from Nishant Kamat
- TPS65010 power management interface from Dirk Behme

Patch from Tony Lindgren

This patch syncs the mainline kernel with the linux-omap tree.
The highlights of the patch are:
- DMA fixes from Samuel Ortiz
- USB low level configuration from David Brownell
- H3 support from Nishant Kamat
- TPS65010 power management interface from Dirk Behme

Patch from Tony Lindgren

Patch adds board support files for OMAP H2 and H2

Patch from Tony Lindgren

Patch from Samuel Ortiz to add OMAP McBSP support

Patch from Ben Dooks

Code to deal with controlling the clock sources
on the s3c2410, using the <arch/hardware/clocks.h>
interface

Includes Herbert Potzl's patch for the clock register
include file

Patch from Sascha Hauer

This patch adds support for the Motorola i.MX SoC. It has board
support included for the MX1ADS Eval Board, but the patch has been
tested on two other custom boards as well.

Things changed since Patch 1955/2:
- fixed according to Russell's comments.
- removed unnecassary files from include/asm-arm/arch-imx.
- removed cpufreq support (it needs rework).
- made myself the Maintainer of mx1ads

Sascha Hauer

Patch from Nicolas Pitre

This would be used by MTD map drivers for example.

Patch from Nicolas Pitre

This is required for a system with user space binaries using iWMMXt 
instructions to even boot (revised again).

It also moves defines for thread_info offsets from  magic static
values to the auto generated asm/constants.h in order to better
cope with changing structure offsets and avoid user errors.

Patch from David Vrabel

ixp4xx_gettimeoffset uses an incorrectly rounded divisor. This results in a non-monotonic clock.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Marc Singer

The work already done to rectify the timer code initialization missed
a necessary change.  This patch adds a timer initialization function
to the LPD7A400 machine type.  It also makes a small correction to the
kernel configuration that is out of step with the machine specific
Kconfig.

Patch from Marc Singer

This patch aligns the lh7a40x port with the updated structure of IDE
drivers.  It also removes an unused FIQ handler.  This patch is made
in order to get the lh7a40x port to build.

Patch from Catalin Marinas

This patch replaces the -mshort-load-bytes option with $(call
check_gcc,-malignment-traps,-mshort-load-bytes) in the CFLAGS
setting in arch/arm/Makefile.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into kernel.bkbits.net:/home/davem/sparc-2.6

In the *ppos cleanups, proc_dol2crvec was updated, but the prototype
found at the top of kernel/sysctl.h was not, generating warning.  This
corrects the prototype to match the code.

(I'm gonna take a stab at moving these into arch/ppc shortly)
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

We allow more commands if the disk was opened read-write.

They'll need it for permission checking.

Signed-off-by: David S. Miller <davem@redhat.com>

Normal users shouldn't have access to the raw device anyway
unless they are in the trusted "disk" group, but let's require
RAWIO capabilities. That's what the original SCSI interfaces
did anyhoo.

We probably _should_ just require write access, but that will
need more of a code change to pass down the file descriptor.

We must setup the queue before calling elevator_init(), otherwise the
elevator cannot use the queue members. This really hurts cfq since it
checks ->nr_requests, which is zero at that time.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

CONFIG_SERIAL_8250_MANY_PORTS should not be set for these boards, as
they only have 2 serial ports.
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>