While CHELSIO_INLINE_CRYPTO is a guard symbol, and just enabling it does
not cause any additional code to be compiled in, all configuration
options protected by it depend on CONFIG_CHELSIO_T4.  Hence it doesn't
make much sense to bother the user with the guard symbol question when
CONFIG_CHELSIO_T4 is disabled.

Fix this by moving the dependency from the individual config options to
the guard symbol.

Fixes: 44fd1c1f ("chelsio/chtls: separate chelsio tls driver from crypto driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Russell King says:

====================
Convert mvpp2 to split PCS support

This series converts the mvpp2 driver to use the split PCS support
that has been merged into phylink last time around. I've been running
this for some time here and, apart from the recent bug fix sent to
net-next, have not seen any issues on DT based systems. I have not
tested ACPI setups, although I've tried to preserve the workaround.

Patch 1 formalises the ACPI workaround.
Patch 2 moves some of mac_config() to the mac_prepare() and
  mac_finish() callbacks so we can keep the ordering when we split
  the PCS bits out.
Patch 3 ensures that the port is forced down while changing the
  interface mode - when in in-band mode, doing this in mac_prepare()
  and mac_finish().
Patch 4 moves the reset handling to mac_prepare() and mac_finish()
Patch 5 does a straight conversion to use PCS operations.
Patch 6 splits the PCS operations into a GMAC PCS operations and
  XLG PCS operations, selecting the appropriate set during
  mac_prepare().  This eliminates a bunch of conditionals from the
  code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Split the XLG and GMAC PCS implementations and switch between them
during the mac_prepare() method.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert mvpp2 to phylink's new pcs support.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the GMAC reset handling into mac_prepare() / mac_finish()
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ensure that the port is forced down while reconfiguring, controlling
this via mac_prepare() and mac_finish() so that it is down while we
are configuring our (future) PCS.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert mvpp2 to use the mac_prepare() and mac_finish() methods in
preparation to converting mvpp2 to split-PCS support.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tidy up the ACPI hack so that we can minimise the function prototypes
for this.  This avoids adding further prototypes unnecessarily.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tom Parkin says:

====================
l2tp: miscellaneous cleanups

This series of patches makes the following cleanups and improvements to
the l2tp code:

 * various API tweaks to remove unused parameters from function calls
 * lightly refactor the l2tp transmission path to capture more error
   conditions in the data plane statistics
 * repurpose the "magic feather" validation in l2tp to check for
   sk_user_data (ab)use as opposed to refcount debugging
 * remove some duplicated code
====================
Reviewed-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_tunnel_closeall is called as a part of tunnel shutdown in order to
close all the sessions held by the tunnel.  The code it uses to close a
session duplicates what l2tp_session_delete does.

Rather than duplicating the code, have l2tp_tunnel_closeall call
l2tp_session_delete instead.

This involves a very minor change to locking in l2tp_tunnel_closeall.
Previously, l2tp_tunnel_closeall checked the session "dead" flag while
holding tunnel->hlist_lock.  This allowed for the code to step to the
next session in the list without releasing the lock if the current
session happened to be in the process of closing already.

By calling l2tp_session_delete instead, l2tp_tunnel_closeall must now
drop and regain the hlist lock for each session in the tunnel list.
Given that the likelihood of a session being in the process of closing
when the tunnel is closed, it seems worth this very minor potential
loss of efficiency to avoid duplication of the session delete code.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The l2tp tunnel and session structures contain a "magic feather" field
which was originally intended to help trace lifetime bugs in the code.

Since the introduction of the shared kernel refcount code in refcount.h,
and l2tp's porting to those APIs, we are covered by the refcount code's
checks and warnings.  Duplicating those checks in the l2tp code isn't
useful.

However, magic feather checks are still useful to help to detect bugs
stemming from misuse/trampling of the sk_user_data pointer in struct
sock.  The l2tp code makes extensive use of sk_user_data to stash
pointers to the tunnel and session structures, and if another subsystem
overwrites sk_user_data it's important to detect this.

As such, rework l2tp's magic feather checks to focus on validating the
tunnel and session data structures when they're extracted from
sk_user_data.

 * Add a new accessor function l2tp_sk_to_tunnel which contains a magic
   feather check, and is used by l2tp_core and l2tp_ip[6]
 * Comment l2tp_udp_encap_recv which doesn't use this new accessor function
   because of the specific nature of the codepath it is called in
 * Drop l2tp_session_queue_purge's check on the session magic feather:
   it is called from code which is walking the tunnel session list, and
   hence doesn't need validation
 * Drop l2tp_session_free's check on the tunnel magic feather: the
   intention of this check is covered by refcount.h's reference count
   sanity checking
 * Add session magic validation in pppol2tp_ioctl.  On failure return
   -EBADF, which mirrors the approach in pppol2tp_[sg]etsockopt.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_xmit_skb has a number of failure paths which are not reflected in
the tunnel and session statistics because the stats are updated by
l2tp_xmit_core.  Hence any errors occurring before l2tp_xmit_core is
called are missed from the statistics.

Refactor the transmit path slightly to capture all error paths.

l2tp_xmit_skb now leaves all the actual work of transmission to
l2tp_xmit_core, and updates the statistics based on l2tp_xmit_core's
return code.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The argument is unused, so remove it.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The data_len argument passed to l2tp_xmit_core is no longer used, so
remove it.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All callers pass the session structure's hdr_len field as the header
length parameter to l2tp_xmit_skb.

Since we're passing a pointer to the session structure to l2tp_xmit_skb
anyway, there's not much point breaking the header length out as a
separate argument.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Expose critical and emergency module alarms

Amit says:

Extend hwmon interface with critical and emergency module alarms.

In case that current module temperature is higher than emergency
threshold, EMERGENCY alarm will be reported in sensors utility:

$ sensors
...
front panel 025:  +55.0°C  (crit = +35.0°C, emerg = +40.0°C) ALARM(EMERGENCY)

In case that current module temperature is higher than critical
threshold, CRIT alarm will be reported in sensors utility:

$ sensors
...
front panel 025:  +54.0°C  (crit = +35.0°C, emerg = +80.0°C) ALARM(CRIT)

Patch set overview:

Patches #1-#2 make several changes to make the code easier to change.

Patch #3 extends the hwmon interface with the new module alarms.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add new attributes to hwmon object for exposing critical and emergency
alarms.

In case that current temperature is higher than emergency threshold,
EMERGENCY alarm will be reported in sensors utility:

$ sensors
...
front panel 025:  +55.0°C  (crit = +35.0°C, emerg = +40.0°C) ALARM(EMERGENCY)

In case that current temperature is higher than critical threshold,
CRIT alarm will be reported in sensors utility:

$ sensors
...
front panel 025:  +54.0°C  (crit = +35.0°C, emerg = +80.0°C) ALARM(CRIT)
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Acked-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the value of MLXSW_HWMON_ATTR_COUNT is calculated not really
accurate.

Add several defines to make the calculation clearer and easier to
change.

Calculate the precise high bound of number of attributes that may be
needed.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw_hwmon_module_temp_show(), mlxsw_hwmon_module_temp_critical_show()
and mlxsw_hwmon_module_temp_emergency_show() query the relevant
temperature from firmware and fill the value in provided buffers.

Split the temperature querying functionality to individual get()
functions and call them from the show() functions.

The get() functions will be used by subsequent patches in the set.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paul Barker says:

====================
Minor improvements to b53 dmesg output

These changes were made while debugging the b53 driver for use on a
custom board. They've been runtime tested on a patched 4.14.y kernel
which supports this board as well as build tested with 5.9-rc3. The
changes are straightforward enough that I think this testing is
sufficient but let me know if further testing is required.

Unfortunately I don't have a board to hand which boots with a more
recent kernel and has a switch supported by the b53 driver. I'd still
like to upstream these patches if possible though.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This allows us to differentiate between the possible failure modes of
b53_switch_reset() by looking at the dmesg output.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change allows us to see which device the err or info messages are
referring to if we have multiple b53 compatible devices on a board.

As this removes the only pr_*() calls in this file we can drop the
definition of pr_fmt().
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shannon Nelson says:

====================
ionic: struct cleanups

This patchset has a few changes for better cacheline use,
to cleanup a page handling API, and to streamline the
Adminq/Notifyq queue handling.  Lastly, we also have a couple
of fixes pointed out by the friendly kernel test robot.

v2: dropped change to irq coalesce default
    fixed Neel's attributions to Co-developed-by
    dropped the unnecessary new call to dma_sync_single_for_cpu()
    added 2 patches from kernel test robot results
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add parenthesis to clarify a boolean usage.

Pointed out in https://lore.kernel.org/lkml/202008060413.VgrMuqLJ%25lkp@intel.com/Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove a vestigial variable.

Pointed out in https://lore.kernel.org/lkml/20200806143735.GA9232@xsang-OptiPlex-9020/Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

The only thing calling ionic_napi any more is the adminq
processing, so combine and simplify.
Co-developed-by: Neel Patel <neel@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove some unnecessary struct fields and related code.
Co-developed-by: Neel Patel <neel@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move a few active struct fields to the front of the struct
for a little better cache use and performance.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

The internal page handling can be cleaned up by passing our
local page struct rather than dma addresses, and by putting
more of the mgmt code into the alloc and free routines.
Co-developed-by: Neel Patel <neel@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Linus Walleij says:

====================
RTL8366 stabilization

This stabilizes the RTL8366 driver by checking validity
of the passed VLANs and refactoring the member config
(MC) code so we do not require strict call order and
de-duplicate some code.

Changes from v1: incorporate review comments on patch
2.

Changes from v2: a oneline bug fix in patch 2.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The VLANs and PVIDs on the RTL8366 utilizes a "member
configuration" (MC) which is largely unexplained in the
code.

This set-up requires a special ordering: rtl8366_set_pvid()
must be called first, followed by rtl8366_set_vlan(),
else the MC will not be properly allocated. Relax this
by factoring out the code obtaining an MC and reuse
the helper in both rtl8366_set_pvid() and
rtl8366_set_vlan() so we remove this strict ordering
requirement.

In the process, add some better comments and debug prints
so people who read the code understand what is going on.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The rtl8366_set_vlan() and rtl8366_set_pvid() get invalid
VLANs tossed at it, especially VLAN0, something the hardware
and driver cannot handle. Check validity and bail out like
we do in the other callbacks.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

in mptcp_connect, 's' selects IPPROTO_MPTCP / IPPROTO_TCP as the value of
'protocol' in socket(), and 'm' switches between different send / receive
modes. Fix die_usage(): swap 'm' and 's' and add missing 'sendfile' mode.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Defines UDP segmentation algorithm in hardware and supports
offloading UDP segmentation.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When building on platforms without device tree, e.g. amd64, W=1 gives
a warning about mv88e6xxx_mdio_external_match being unused. Replace
of_match_node() with of_device_is_compatible() to prevent this
warning.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ioana Ciornei says:

====================
dpaa2-eth: add a dpaa2_eth_ prefix to all functions

This is just a quick cleanup that aims at adding a dpaa2_eth_ prefix to
all functions within the dpaa2-eth driver even if those are static and
private to the driver. The main reason for doing this is that looking a
perf top, for example, is becoming an inconvenience because one cannot
easily determine which entries are dpaa2-eth related or not.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Some static functions in the dpaa2-eth driver don't have the dpaa2_eth_
prefix and this is becoming an inconvenience when looking at, for
example, a perf top output and trying to determine easily which entries
are dpaa2-eth related. Ammend this by adding the prefix to all the
functions.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some static functions in the dpaa2-eth driver don't have the dpaa2_eth_
prefix and this is becoming an inconvenience when looking at, for
example, a perf top output and trying to determine easily which entries
are dpaa2-eth related. Ammend this by adding the prefix to all the
functions.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some static functions in the dpaa2-eth driver don't have the dpaa2_eth_
prefix and this is becoming an inconvenience when looking at, for
example, a perf top output and trying to determine easily which entries
are dpaa2-eth related. Ammend this by adding the prefix to all the
functions.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If nf_conncount_init fails currently the dispatched work is not canceled,
causing problems when the timer fires. This change fixes this by not
scheduling the work until all initialization is successful.

Fixes: a65878d6 ("net: openvswitch: fixes potential deadlock in dp cleanup code")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>