- 04 Apr, 2019 40 commits
-
-
Cristian Sicilia authored
Creating a temporary variable to improve readability Signed-off-by:
Cristian Sicilia <sicilia.cristian@gmail.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Cristian Sicilia authored
Enclosing parameter with parenthesis due to avoid possible precedence issue. Signed-off-by:
-
Andreas Klinger authored
add a maintainer for the newly created ultrasonic driver family of maxbotix Signed-off-by:
Andreas Klinger <ak@it-klinger.de> Signed-off-by:
-
Andreas Klinger authored
Add I2CXL-MaxSonar ultrasonic distance sensors of types mb1202, mb1212, mb1222, mb1232, mb1242, mb7040, mb7137 using an i2c interface Implemented functionality: - reading the distance via in_distance_raw - buffered mode with trigger - make use of interrupt to announce completion of ranging Add mb1232 driver to Kconfig and Makefile Signed-off-by:
-
Andreas Klinger authored
Add doc for dt binding maxbotix,mb1232. This binding is for MaxBotix I2CXL-MaxSonar ultrasonic rangers which share a common i2c interface. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Andreas Klinger authored
Add MaxBotix, which is a vendor of ultrasonic rangers in different varieties and interfaces. Signed-off-by:
Andreas Färber <afaerber@suse.de> Reviewed-by:
-
Kangjie Lu authored
devm_regmap_init_i2c may fail and return NULL. The fix returns the error when it fails. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
Marcelo Schmitt authored
Add an ABI documentation for the ad5933 driver. Signed-off-by:
Marcelo Schmitt <marcelo.schmitt1@gmail.com> Signed-off-by:
-
Marcelo Schmitt authored
Remove the previous comment about direct access via sysfs which would lead one think ad5933 driver has limitations it actually doesn't. Signed-off-by:
-
Marcelo Schmitt authored
Add SPDX identifier of GPL-2.0 for the ad5933 driver. Signed-off-by:
-
Marcelo Schmitt authored
Organize includes to list them in lexicographic order. Signed-off-by:
-
Marcelo Schmitt authored
Make multi-line comments compliant with the preferred code style. Signed-off-by:
-
Renato Lui Geh authored
Adds a device tree binding for the ad7780 driver. Signed-off-by:
Renato Lui Geh <renatogeh@gmail.com> Signed-off-by:
-
Renato Lui Geh authored
Move ad7780 ADC driver out of staging and into the mainline. The ad7780 is a sigma-delta analog to digital converter. This driver provides reading voltage values and status bits from both the ad778x and ad717x series. Its interface also allows writing on the FILTER and GAIN GPIO pins on the ad778x. Signed-off-by:
Giuliano Belinassi <giuliano.belinassi@usp.br> Co-developed-by:
-
Renato Lui Geh authored
This patch adds a new copyright holder to the ad7780 driver. Signed-off-by:
-
Renato Lui Geh authored
Add SPDX identifier (GPL-2.0) to the AD7780 driver. Signed-off-by:
-
Renato Lui Geh authored
To maintain consistency between ad7780_probe and ad7780_remove orders, regulator initialization has been moved to after GPIO initializations. Signed-off-by:
-
Renato Lui Geh authored
The ad7780 supports both the ad778x and ad717x families. Each chip has a corresponding ID. This patch provides a mask for extracting ID values from the status bits and also macros for the correct values for the ad7170, ad7171, ad7780 and ad7781. Signed-off-by:
-
Renato Lui Geh authored
The AD7780 driver contains status pattern bits designed for checking whether serial transfers have been correctly performed. Pattern macros were previously generated through bit fields. This patch sets good pattern values directly and masks through GENMASK. Signed-off-by:
-
Renato Lui Geh authored
This patch adds the new feature of reading the filter odr value for ad778x chips. This value is stored in the chip's state struct whenever a read or write call is performed on the chip's driver. This feature requires sharing SAMP_FREQ. Since the ad717x does not have a filter option, the driver only shares the relevant info mask for the ad778x family. Signed-off-by:
-
Renato Lui Geh authored
This patch adds a new functionality of reading gain values from the ad778x chips. This value is stored in the chip's state struct and is updated whenever a read or write call is performed on the driver. Signed-off-by:
-
Renato Lui Geh authored
This patch simply adds a missing switch default case in read_raw. Signed-off-by:
-
Renato Lui Geh authored
Previously, the AD7780 driver only supported gpio for the 'powerdown' pin. This commit adds suppport for the 'gain' and 'filter' pin. Signed-off-by:
-
Gregory CLEMENT authored
As most of the other ADC the lpc32xx one use a vref-supply property: document it. Reviewed-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
-
Gregory CLEMENT authored
Until now this driver only exposed the raw value of the channels. With this patch, the scale value is also exposed. It depends of a regulator supply, and unlike most of the other driver, do not having this regulator won't prevent to use the driver. The reason for it is to allow to continue to use this driver with an old device tree. If there is no regulator supply then the scale won't be exposed. Signed-off-by:
-
Gregory CLEMENT authored
A few headers is useless: remove them. Signed-off-by:
-
Gregory CLEMENT authored
Sort the headers in alphabetic order in order to ease the maintenance for this part. Signed-off-by:
-
Mircea Caprioru authored
This patch will remove platform data members and replace them with device tree properties. These properties will be subject to further modifications and probably replaced with other functionalities at some point in time. Signed-off-by:
Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by:
-
Lorenzo Bianconi authored
Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Add support to STM LSM6DSOX 6-axis (acc + gyro) Mems sensor https://www.st.com/resource/en/datasheet/lsm6dsox.pdfSigned-off-by:
-
Mircea Caprioru authored
This patch removes the goto out statement and uninformative print message. This improves readability. Signed-off-by:
-
Mircea Caprioru authored
This patch replaces the platform data clock select member with DT clock binding. Through the DT the external clock binding is specified. If this is not provided then the device will use the internal clock source. With the external clock binding there is the option to use a clock or a crystal as the clock source. When an external crystal is used it is connected to MCLK1 and MCLK2 pins. If the external clock is used only MCLK2 pin will be connected. Signed-off-by:
-
Mircea Caprioru authored
This patch fixes the odd indentation inside function ad7192_calibrate_all. Signed-off-by:
-
Colin Ian King authored
A return statement is indented one level too deeply; clean this up by removing a tab. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Stefan Popa <stefan.popa@analog.com> Signed-off-by:
-
Enric Balletbo i Serra authored
Adopt the SPDX license identifier headers to ease license compliance management. Also fix MODULE_LICENSE for cros_ec_accel_legacy to match the SPDX and boiler plate license. Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
-
Gwendal Grignou authored
Document cros_ec_sensors_read_lpc, adding an additional note to explain that this is the safe function for reading the EC data. Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Signed-off-by:
-
Guenter Roeck authored
The cros_ec sensors drivers do not call any sysfs functions or use any sysfs defines, and thus do not need to include linux/sysfs.h. Also, some cros_ec drivers include linux/delay.h and is not used. Signed-off-by:
Guenter Roeck <groeck@chromium.org> [remove linux/delay.h] Signed-off-by:
-
Linus Walleij authored
The BMP280/BME280 calibration data should also go into the entropy pool, like we do for BMP180. This just adds the temperature and pressure calibration, the humidity calibration seems like too much annoying calls to add. Cc: Tomasz Duszynski <tduszyns@gmail.com> Cc: Stefan Tatschner <stefan.tatschner@gmail.com> Cc: Andreas Klinger <ak@it-klinger.de> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Stefan Popa authored
Add documentation for optional use of external clock. All devices supported by this driver can work with an external clock in sync mode. Another mode, called Pulse Per Second (PPS) is supported only by adis1649x devices. The mode is selected by using the "clock-names" property. The pin which is used as external clock input is selected by using a custom optional property called "adi,ext-clk-pin". If this field is left empty, DIO2 is assigned as default external clock input pin. Signed-off-by:
-
Stefan Popa authored
Inertial sensor data collection and processing can be controlled by configuring one of the DIOx lines as an external clock input. This option is available for all devices supported by this driver. However, only adis1649x devices support different modes for the external clock. Sync mode is supported by all devices. In this mode, the output data rate is equal with the clock frequency divided by DEC_RATE + 1. This mode of calculation is similar with the case when the internal clock is used. Pulse Per Second (PPS) Mode, is only supported by adis1649x devices. In this mode, the output data rate is equal to the product of the external clock frequency and the scale factor in the SYNC_SCALE register. This patch uses the "clock-names" property to enable the external clock in one of the two supported modes: "sync" or "pps". This property is optional. If it is not specified, the internal clock is used. This patch also offers the option to select the DIOx line to be used as an external clock input via the custom "adi,ext-clk-pin" property. If this field is left empty, DIO2 is assigned as default external clock input pin. Each DIOx pin supports only one function at a time (data ready line selection or external clock input). Signed-off-by:
-
