Pull more documentation updates from Jonathan Corbet:
 "A handful of late-arriving docs fixes, along with a patch changing a
  lot of HTTP links to HTTPS that had to be yanked and redone before the
  first pull"

* tag 'docs-5.8-2' of git://git.lwn.net/linux:
  docs/memory-barriers.txt/kokr: smp_mb__{before,after}_atomic(): update Documentation
  Documentation: devres: add missing entry for devm_platform_get_and_ioremap_resource()
  Replace HTTP links with HTTPS ones: documentation
  docs: it_IT: address invalid reference warnings
  doc: zh_CN: use doc reference to resolve undefined label warning
  docs: Update the location of the LF NDA program
  docs: dev-tools: coccinelle: underlines

Pull more ACPI updates from Rafael Wysocki:
 "Update the ACPICA code in the kernel to upstream revision 20200528
  with the following changes:

   - Remove some dead code from the acpidump utility (Bob Moore)

   - Add new OperationRegion subtype keyword PlatformRtMechanism to the
     compiler (Erik Kaneda)"

* tag 'acpi-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Update version to 20200528
  ACPICA: iASL: add new OperationRegion subtype keyword PlatformRtMechanism
  ACPICA: acpidump: Removed dead code from oslinuxtbl.c

Pull more power management updates from Rafael Wysocki:
 "These are operating performance points (OPP) framework updates mostly,
  including support for interconnect bandwidth in the OPP core, plus a
  few cpufreq changes, including boost support in the CPPC cpufreq
  driver, an ACPI device power management fix and a hibernation code
  cleanup.

  Specifics:

   - Add support for interconnect bandwidth to the OPP core (Georgi
     Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar).

   - Add support for regulator enable/disable to the OPP core (Kamil
     Konieczny).

   - Add boost support to the CPPC cpufreq driver (Xiongfeng Wang).

   - Make the tegra186 cpufreq driver set the
     CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab).

   - Prevent the ACPI power management from using power resources with
     devices where the list of power resources for power state D0 (full
     power) is missing (Rafael Wysocki).

   - Annotate a hibernation-related function with __init (Christophe
     JAILLET)"

* tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PM: Avoid using power resources if there are none for D0
  cpufreq: CPPC: add SW BOOST support
  cpufreq: change '.set_boost' to act on one policy
  PM: hibernate: Add __init annotation to swsusp_header_init()
  opp: Don't parse icc paths unnecessarily
  opp: Remove bandwidth votes when target_freq is zero
  opp: core: add regulators enable and disable
  opp: Reorder the code for !target_freq case
  opp: Expose bandwidth information via debugfs
  cpufreq: dt: Add support for interconnect bandwidth scaling
  opp: Update the bandwidth on OPP frequency changes
  opp: Add sanity checks in _read_opp_key()
  opp: Add support for parsing interconnect bandwidth
  cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
  OPP: Add helpers for reading the binding properties
  dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings

Pull input updates from Dmitry Torokhov:

 - a new driver for the Azoteq IQS269A capacitive touch controller

 - a new driver for the Cypress CY8CTMA140 touchscreen

 - updates to Elan and ft5x06 touchscreen drivers

 - assorted driver fixes

 - msm-vibrator has been removed as we have a more generic solution

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits)
  Input: adi - work around module name confict
  Input: iqs269a - add missing I2C dependency
  Input: elants - refactor elants_i2c_execute_command()
  Input: elants - override touchscreen info with DT properties
  Input: elants - remove unused axes
  Input: add support for Azoteq IQS269A
  dt-bindings: input: Add bindings for Azoteq IQS269A
  Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups
  Input: remove msm-vibrator driver
  dt-bindings: Input: remove msm-vibrator
  Input: elants_i2c - provide an attribute to show calibration count
  Input: introduce input_mt_report_slot_inactive()
  dt-bindings: input: touchscreen: elants_i2c: convert to YAML
  Input: add driver for the Cypress CY8CTMA140 touchscreen
  dt-bindings: touchscreen: Add CY8CTMA140 bindings
  Input: edt-ft5x06 - prefer asynchronous probe
  Input: edt-ft5x06 - improve power management operations
  Input: edt-ft5x06 - move parameter restore into helper
  Input: edt-ft5x06 - fix get_default register write access
  Input: atkbd - receive and use physcode->keycode mapping from FW
  ...

Pull virtio updates from Michael Tsirkin:

 - virtio-mem: paravirtualized memory hotplug

 - support doorbell mapping for vdpa

 - config interrupt support in ifc

 - fixes all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (40 commits)
  vhost/test: fix up after API change
  virtio_mem: convert device block size into 64bit
  virtio-mem: drop unnecessary initialization
  ifcvf: implement config interrupt in IFCVF
  vhost: replace -1 with VHOST_FILE_UNBIND in ioctls
  vhost_vdpa: Support config interrupt in vdpa
  ifcvf: ignore continuous setting same status value
  virtio-mem: Don't rely on implicit compiler padding for requests
  virtio-mem: Try to unplug the complete online memory block first
  virtio-mem: Use -ETXTBSY as error code if the device is busy
  virtio-mem: Unplug subblocks right-to-left
  virtio-mem: Drop manual check for already present memory
  virtio-mem: Add parent resource for all added "System RAM"
  virtio-mem: Better retry handling
  virtio-mem: Offline and remove completely unplugged memory blocks
  mm/memory_hotplug: Introduce offline_and_remove_memory()
  virtio-mem: Allow to offline partially unplugged memory blocks
  mm: Allow to offline unmovable PageOffline() pages via MEM_GOING_OFFLINE
  virtio-mem: Paravirtualized memory hotunplug part 2
  virtio-mem: Paravirtualized memory hotunplug part 1
  ...

Pull UML updates from Richard Weinberger:

 - Use fdatasync() in ubd

 - Add a generic "fd" vector transport

 - Minor cleanups and fixes

* tag 'for-linus-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: virtio: Replace zero-length array with flexible-array
  um: Use fdatasync() when mapping the UBD FSYNC command
  um: Do not evaluate compiler's library path when cleaning
  um: Neaten vu_err macro definition
  um: Add a generic "fd" vector transport
  um: Add include: memset() and memcpy() are in <string.h>

Pull UBI update from Richard Weinberger:
 "This contains a single change for UBI:

   - Select fastmap anchor PEBs considering wear level rules"

* tag 'for-linus-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubi: Select fastmap anchor PEBs considering wear level rules

Pull MTD updates from Richard Weinberger:
 "MTD core changes:
   - partition parser: Support MTD names containing one or more colons.
   - mtdblock: clear cache_state to avoid writing to bad blocks
     repeatedly.

  Raw NAND core changes:
   - Stop using nand_release(), patched all drivers.
   - Give more information about the ECC weakness when not matching the
     chip's requirement.
   - MAINTAINERS updates.
   - Support emulated SLC mode on MLC NANDs.
   - Support "constrained" controllers, adapt the core and ONFI/JEDEC
     table parsing and Micron's code.
   - Take check_only into account.
   - Add an invalid ECC mode to discriminate with valid ones.
   - Return an enum from of_get_nand_ecc_algo().
   - Drop OOB_FIRST placement scheme.
   - Introduce nand_extract_bits().
   - Ensure a consistent bitflips numbering.
   - BCH lib:
      - Allow easy bit swapping.
      - Rework a little bit the exported function names.
   - Fix nand_gpio_waitrdy().
   - Propage CS selection to sub operations.
   - Add a NAND_NO_BBM_QUIRK flag.
   - Give the possibility to verify a read operation is supported.
   - Add a helper to check supported operations.
   - Avoid indirect access to ->data_buf().
   - Rename the use_bufpoi variables.
   - Fix comments about the use of bufpoi.
   - Rename a NAND chip option.
   - Reorder the nand_chip->options flags.
   - Translate obscure bitfields into readable macros.
   - Timings:
      - Fix default values.
      - Add mode information to the timings structure.

  Raw NAND controller driver changes:
   - Fixed many error paths.
   - Arasan
      - New driver
   - Au1550nd:
      - Various cleanups
      - Migration to ->exec_op()
   - brcmnand:
      - Misc cleanup.
      - Support v2.1-v2.2 controllers.
      - Remove unused including <linux/version.h>.
      - Correctly verify erased pages.
      - Fix Hamming OOB layout.
   - Cadence
      - Make cadence_nand_attach_chip static.
   - Cafe:
      - Set the NAND_NO_BBM_QUIRK flag
   - cmx270:
      - Remove this controller driver.
   - cs553x:
      - Misc cleanup
      - Migration to ->exec_op()
   - Davinci:
      - Misc cleanup.
      - Migration to ->exec_op()
   - Denali:
      - Add more delays before latching incoming data
   - Diskonchip:
      - Misc cleanup
      - Migration to ->exec_op()
   - Fsmc:
      - Change to non-atomic bit operations.
   - GPMI:
      - Use nand_extract_bits()
      - Fix runtime PM imbalance.
   - Ingenic:
      - Migration to exec_op()
      - Fix the RB gpio active-high property on qi, lb60
      - Make qi_lb60_ooblayout_ops static.
   - Marvell:
      - Misc cleanup and small fixes
   - Nandsim:
      - Fix the error paths, driver wide.
   - Omap_elm:
      - Fix runtime PM imbalance.
   - STM32_FMC2:
      - Misc cleanups (error cases, comments, timeout valus, cosmetic
        changes).

  SPI NOR core changes:
   - Add, update support and fix few flashes.
   - Prepare BFPT parsing for JESD216 rev D.
   - Kernel doc fixes.

  CFI changes:
   - Support the absence of protection registers for Intel CFI flashes.
   - Replace zero-length array with flexible-arrays"

* tag 'mtd/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (208 commits)
  mtd: clear cache_state to avoid writing to bad blocks repeatedly
  mtd: parser: cmdline: Support MTD names containing one or more colons
  mtd: physmap_of_gemini: remove defined but not used symbol 'syscon_match'
  mtd: rawnand: Add an invalid ECC mode to discriminate with valid ones
  mtd: rawnand: Return an enum from of_get_nand_ecc_algo()
  mtd: rawnand: Drop OOB_FIRST placement scheme
  mtd: rawnand: Avoid a typedef
  mtd: Fix typo in mtd_ooblayout_set_databytes() description
  mtd: rawnand: Stop using nand_release()
  mtd: rawnand: nandsim: Reorganize ns_cleanup_module()
  mtd: rawnand: nandsim: Rename a label in ns_init_module()
  mtd: rawnand: nandsim: Manage lists on error in ns_init_module()
  mtd: rawnand: nandsim: Fix the label pointing on nand_cleanup()
  mtd: rawnand: nandsim: Free erase_block_wear on error
  mtd: rawnand: nandsim: Use an additional label when freeing the nandsim object
  mtd: rawnand: nandsim: Stop using nand_release()
  mtd: rawnand: nandsim: Free the partition names in ns_free()
  mtd: rawnand: nandsim: Free the allocated device on error in ns_init()
  mtd: rawnand: nandsim: Free partition names on error in ns_init()
  mtd: rawnand: nandsim: Fix the two ns_alloc_device() error paths
  ...

Pull clk updates from Stephen Boyd:
 "This time around we have four lines of diff in the core framework,
  removing a function that isn't used anymore. Otherwise the main new
  thing for the common clk framework is that it is selectable in the
  Kconfig language now. Hopefully this will let clk drivers and clk
  consumers be testable on more than the architectures that support the
  clk framework. The goal is to introduce some Kunit tests for the
  framework.

  Outside of the core framework we have the usual set of various driver
  updates and non-critical fixes. The dirstat shows that the new
  Baikal-T1 driver is the largest addition this time around in terms of
  lines of code. After that the x86 (Intel), Qualcomm, and Mediatek
  drivers introduce many lines to support new or upcoming SoCs. After
  that the dirstat shows the usual suspects working on their SoC support
  by fixing minor bugs, correcting data and converting some of their DT
  bindings to YAML.

  Core:
   - Allow the COMMON_CLK config to be selectable

  New Drivers:
   - Clk driver for Baikal-T1 SoCs
   - Mediatek MT6765 clock support
   - Support for Intel Agilex clks
   - Add support for X1830 and X1000 Ingenic SoC clk controllers
   - Add support for the new Renesas RZ/G1H (R8A7742) SoC
   - Add support for Qualcomm's MSM8939 Generic Clock Controller

  Updates:
   - Support IDT VersaClock 5P49V5925
   - Bunch of updates for HSDK clock generation unit (CGU) driver
   - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
   - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
   - Enable supply regulators for GPU gdscs on Qualcomm SoCs
   - Add support for Si5342, Si5344 and Si5345 chips
   - Support custom flags in Xilinx zynq firmware
   - Various small fixes to the Xilinx clk driver
   - A single minor rounding fix for the legacy Allwinner clock support
   - A few patches from Abel Vesa as preparation of adding audiomix
     clock support on i.MX
   - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and
     clk-pllv3 drivers
   - Drop dependency on ARM64 for i.MX8M clock driver, to support
     aarch32 mode on aarch64 hardware
   - A series from Peng Fan to improve i.MX8M clock drivers, using
     composite clock for core and bus clk slice
   - Set a better parent clock for flexcan on i.MX6UL to support CiA102
     defined bit rates
   - A couple changes for EMC frequency scaling on Tegra210
   - Support for CPU frequency scaling on Tegra20/Tegra30
   - New clk gate for CSI test pattern generator on Tegra210
   - Regression fixes for Samsung exynos542x and exynos5433 SoCs
   - Use of fallthrough; attribute for Samsung s3c24xx
   - Updates and fixup HDMI and video clocks on Meson8b
   - Fixup reset polarity on Meson8b
   - Fix GPU glitch free mux switch on Meson gx and g12
   - A minor fix for the currently unused suspend/resume handling on
     Renesas RZ/A1 and RZ/A2
   - Two more conversions of Renesas DT bindings to json-schema
   - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits)
  clk: mediatek: Remove ifr{0,1}_cfg_regs structures
  clk: baikal-t1: remove redundant assignment to variable 'divider'
  clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible"
  dt-bindings: clock: Add a missing include to MMP Audio Clock binding
  dt: Add bindings for IDT VersaClock 5P49V5925
  clk: vc5: Add support for IDT VersaClock 5P49V6965
  clk: Add Baikal-T1 CCU Dividers driver
  clk: Add Baikal-T1 CCU PLLs driver
  dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
  dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
  clk: mediatek: assign the initial value to clk_init_data of mtk_mux
  clk: mediatek: Add MT6765 clock support
  clk: mediatek: add mt6765 clock IDs
  dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
  CLK: HSDK: CGU: add support for 148.5MHz clock
  CLK: HSDK: CGU: support PLL bypassing
  CLK: HSDK: CGU: check if PLL is bypassed first
  clk: clk-si5341: Add support for the Si5345 series
  ...

Pull power supply and reset updates from Sebastian Reichel:
 "This time there are lots of changes. Quite a few changes to the core,
  lots of driver changes and one change to kobject core (with Ack from
  Greg).

  Summary:

  kobject:
   - Increase number of allowed uevent variables

  power-supply core:
   - Add power-supply type in uevent
   - Cleanup property handling in core
   - Make property and usb_type pointers const
   - Convert core power-supply DT binding to YAML
   - Cleanup HWMON code
   - Add new health status "calibration required"
   - Add new properties for manufacture date and capacity error margin

  battery drivers:
   - new cw2015 battery driver used by pine64 Pinebook Pro laptop
   - axp22: blacklist on Meegopad T02
   - sc27xx: support current/voltage reading
   - max17042: support time-to-empty reading
   - simple-battery: add more battery parameters
   - bq27xxx: convert DT binding document to YAML
   - sbs-battery: add TI BQ20Z65 support, fix technology property,
         convert DT binding to YAML, add option to disable charger
         broadcasts, add new properties: manufacture date, capacity
         error margin, average current, charge current and voltage and
         support calibration required health status
   - misc fixes

  charger drivers:
   - bq25890: cleanup, implement charge type, precharge current and
         input current limiting properties
   - bd70528: use new linear range helper library
   - bd99954: new charger driver
   - mp2629: new charger driver
   - misc fixes

  reboot drivers:
   - oxnas-restart: introduce new driver
   - syscon-reboot: convert DT binding to YAML, add parent syscon device
         support
   - misc fixes"

* tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (85 commits)
  power: supply: cw2015: Attach OF ID table to the driver
  power: reset: gpio-poweroff: add missing '\n' in dev_err()
  Revert "power: supply: sbs-battery: simplify read_read_string_data"
  Revert "power: supply: sbs-battery: add PEC support"
  dt-bindings: power: sbs-battery: Convert to yaml
  power: supply: sbs-battery: constify power-supply property array
  power: supply: sbs-battery: switch to i2c's probe_new
  power: supply: sbs-battery: switch from of_property_* to device_property_*
  power: supply: sbs-battery: add ability to disable charger broadcasts
  power: supply: sbs-battery: fix idle battery status
  power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support
  power: supply: sbs-battery: add MANUFACTURE_DATE support
  power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support
  power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support
  power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support
  power: supply: sbs-battery: add PEC support
  power: supply: sbs-battery: simplify read_read_string_data
  power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support
  power: supply: sbs-battery: Add TI BQ20Z65 support
  power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED
  ...

Pull dmaengine updates from Vinod Koul:
 "A fairly small dmaengine update which includes mostly driver updates
  (dmatest, dw-edma, ioat, mmp-tdma and k3-udma) along with Renesas
  binding update to json-schema"

* tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (39 commits)
  dmaengine: imx-sdma: initialize all script addresses
  dmaengine: ti: k3-udma: Use proper return code in alloc_chan_resources
  dmaengine: ti: k3-udma: Remove udma_chan.in_ring_cnt
  dmaengine: ti: k3-udma: Add missing dma_sync call for rx flush descriptor
  dmaengine: at_xdmac: Replace zero-length array with flexible-array
  dmaengine: at_hdmac: Replace zero-length array with flexible-array
  dmaengine: qcom: bam_dma: Replace zero-length array with flexible-array
  dmaengine: ti: k3-udma: Use PTR_ERR_OR_ZERO() to simplify code
  dmaengine: moxart-dma: Drop pointless static qualifier in moxart_probe()
  dmaengine: sf-pdma: Simplify the error handling path in 'sf_pdma_probe()'
  dmaengine: qcom_hidma: use true,false for bool variable
  dmaengine: dw-edma: support local dma device transfer semantics
  dmaengine: Fix doc strings to satisfy validation script
  dmaengine: Include dmaengine.h into dmaengine.c
  dmaengine: dmatest: Describe members of struct dmatest_info
  dmaengine: dmatest: Describe members of struct dmatest_params
  dmaengine: dmatest: Allow negative timeout value to specify infinite wait
  Revert "dmaengine: dmatest: timeout value of -1 should specify infinite wait"
  dmaengine: stm32-dma: direct mode support through device tree
  dt-bindings: dma: add direct mode support through device tree in stm32-dma
  ...

The improved paragraph about line lengths contains a sentence with a
duplicate word: there is one "are" at the end of a line, followed by a
second one at the beginning of the next line.

Drop the first one, as that one is part of the longest line.

Fixes: bdc48fa1 ("checkpatch/coding-style: deprecate 80-column warning")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

"mm: consolidate pte_index() and pte_offset_*() definitions" was supposed
to remove arch/sparc/mm/srmmu.c:pte_offset_kernel().

Fixes: 974b9b2c ("mm: consolidate pte_index() and pte_offset_*() definitions")
Reported-by: kernel test robot <lkp@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* acpica:
  ACPICA: Update version to 20200528
  ACPICA: iASL: add new OperationRegion subtype keyword PlatformRtMechanism
  ACPICA: acpidump: Removed dead code from oslinuxtbl.c

* pm-cpufreq:
  cpufreq: CPPC: add SW BOOST support
  cpufreq: change '.set_boost' to act on one policy
  cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag

* pm-acpi:
  ACPI: PM: Avoid using power resources if there are none for D0

* pm-opp:
  opp: Don't parse icc paths unnecessarily
  opp: Remove bandwidth votes when target_freq is zero
  opp: core: add regulators enable and disable
  opp: Reorder the code for !target_freq case
  opp: Expose bandwidth information via debugfs
  cpufreq: dt: Add support for interconnect bandwidth scaling
  opp: Update the bandwidth on OPP frequency changes
  opp: Add sanity checks in _read_opp_key()
  opp: Add support for parsing interconnect bandwidth
  interconnect: Remove unused module exit code from core
  interconnect: Disallow interconnect core to be built as a module
  interconnect: Add of_icc_get_by_index() helper function
  OPP: Add helpers for reading the binding properties
  dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings

Pull fuse updates from Miklos Szeredi:

 - Fix a rare deadlock in virtiofs

 - Fix st_blocks in writeback cache mode

 - Fix wrong checks in splice move causing spurious warnings

 - Fix a race between a GETATTR request and a FUSE_NOTIFY_INVAL_INODE
   notification

 - Use rb-tree instead of linear search for pages currently under
   writeout by userspace

 - Fix copy_file_range() inconsistencies

* tag 'fuse-update-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: copy_file_range should truncate cache
  fuse: fix copy_file_range cache issues
  fuse: optimize writepages search
  fuse: update attr_version counter on fuse_notify_inval_inode()
  fuse: don't check refcount after stealing page
  fuse: fix weird page warning
  fuse: use dump_page
  virtiofs: do not use fuse_fill_super_common() for device installation
  fuse: always allow query of st_dev
  fuse: always flush dirty data on close(2)
  fuse: invalidate inode attr in writeback cache mode
  fuse: Update stale comment in queue_interrupt()
  fuse: BUG_ON correction in fuse_dev_splice_write()
  virtiofs: Add mount option and atime behavior to the doc
  virtiofs: schedule blocking async replies in separate worker

Pull overlayfs updates from Miklos Szeredi:
 "Fixes:

   - Resolve mount option conflicts consistently

   - Sync before remount R/O

   - Fix file handle encoding corner cases

   - Fix metacopy related issues

   - Fix an unintialized return value

   - Add missing permission checks for underlying layers

  Optimizations:

   - Allow multipe whiteouts to share an inode

   - Optimize small writes by inheriting SB_NOSEC from upper layer

   - Do not call ->syncfs() multiple times for sync(2)

   - Do not cache negative lookups on upper layer

   - Make private internal mounts longterm"

* tag 'ovl-update-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (27 commits)
  ovl: remove unnecessary lock check
  ovl: make oip->index bool
  ovl: only pass ->ki_flags to ovl_iocb_to_rwf()
  ovl: make private mounts longterm
  ovl: get rid of redundant members in struct ovl_fs
  ovl: add accessor for ofs->upper_mnt
  ovl: initialize error in ovl_copy_xattr
  ovl: drop negative dentry in upper layer
  ovl: check permission to open real file
  ovl: call secutiry hook in ovl_real_ioctl()
  ovl: verify permissions in ovl_path_open()
  ovl: switch to mounter creds in readdir
  ovl: pass correct flags for opening real directory
  ovl: fix redirect traversal on metacopy dentries
  ovl: initialize OVL_UPPERDATA in ovl_lookup()
  ovl: use only uppermetacopy state in ovl_lookup()
  ovl: simplify setting of origin for index lookup
  ovl: fix out of bounds access warning in ovl_check_fb_len()
  ovl: return required buffer size for file handles
  ovl: sync dirty data when remounting to ro mode
  ...

Pull AFS fixes from David Howells:
 "A set of small patches to fix some things, most of them minor.

   - Fix a memory leak in afs_put_sysnames()

   - Fix an oops in AFS file locking

   - Fix new use of BUG()

   - Fix debugging statements containing %px

   - Remove afs_zero_fid as it's unused

   - Make afs_zap_data() static"

* tag 'afs-fixes-20200609' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Make afs_zap_data() static
  afs: Remove afs_zero_fid as it's not used
  afs: Fix debugging statements with %px to be %p
  afs: Fix use of BUG()
  afs: Fix file locking
  afs: Fix memory leak in afs_put_sysnames()

These aren't used and the macros that reference them aren't used either.
Remove the dead code to avoid compile warnings.

Cc: Owen Chen <owen.chen@mediatek.com>
Cc: Mars Cheng <mars.cheng@mediatek.com>
Cc: Macpaul Lin <macpaul.lin@mediatek.com>
Fixes: 1aca9939 ("clk: mediatek: Add MT6765 clock support")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200609211847.27366-1-sboyd@kernel.org

The variable divider is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200602172435.70282-1-colin.king@canonical.comReviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

There is a spelling mistake in a pr_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200602121030.39132-1-colin.king@canonical.comReviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

The include file for input clock in the example was missing, breaking the
validation.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reported-by: Rob Herring <robh+dt@kernel.org>
Link: https://lore.kernel.org/r/20200605065258.567858-1-lkundrak@v3.skAcked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Making module name conflicts a fatal error breaks sparc64 allmodconfig:

Error log:
error: the following would cause module name conflict:
  drivers/char/adi.ko
  drivers/input/joystick/adi.ko

Renaming one of the modules would solve the problem, but then cause other
problems because neither of them is automatically loaded and changing
the name is likely to break any setup that relies on manually loading
it by name.

As there is probably no sparc64 system with this kind of ancient joystick
attached, work around it by adding a Kconfig dependency that forbids
them from both being modules.  It is still possible to build the joystick
driver if the sparc64 adi driver is built-in.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200609100643.1245061-1-arnd@arndb.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've added some knobs to enhance compression feature
  and harden testing environment. In addition, we've fixed several bugs
  reported from Android devices such as long discarding latency, device
  hanging during quota_sync, etc.

  Enhancements:
   - support lzo-rle algorithm
   - add two ioctls to release and reserve blocks for compression
   - support partial truncation/fiemap on compressed file
   - introduce sysfs entries to attach IO flags explicitly
   - add iostat trace point along with read io stat

  Bug fixes:
   - fix long discard latency
   - flush quota data by f2fs_quota_sync correctly
   - fix to recover parent inode number for power-cut recovery
   - fix lz4/zstd output buffer budget
   - parse checkpoint mount option correctly
   - avoid inifinite loop to wait for flushing node/meta pages
   - manage discard space correctly

  And some refactoring and clean up patches were added"

* tag 'f2fs-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits)
  f2fs: attach IO flags to the missing cases
  f2fs: add node_io_flag for bio flags likewise data_io_flag
  f2fs: remove unused parameter of f2fs_put_rpages_mapping()
  f2fs: handle readonly filesystem in f2fs_ioc_shutdown()
  f2fs: avoid utf8_strncasecmp() with unstable name
  f2fs: don't return vmalloc() memory from f2fs_kmalloc()
  f2fs: fix retry logic in f2fs_write_cache_pages()
  f2fs: fix wrong discard space
  f2fs: compress: don't compress any datas after cp stop
  f2fs: remove unneeded return value of __insert_discard_tree()
  f2fs: fix wrong value of tracepoint parameter
  f2fs: protect new segment allocation in expand_inode_data
  f2fs: code cleanup by removing ifdef macro surrounding
  f2fs: avoid inifinite loop to wait for flushing node pages at cp_error
  f2fs: flush dirty meta pages when flushing them
  f2fs: fix checkpoint=disable:%u%%
  f2fs: compress: fix zstd data corruption
  f2fs: add compressed/gc data read IO stat
  f2fs: fix potential use-after-free issue
  f2fs: compress: don't handle non-compressed data in workqueue
  ...

Pull exfat update from Namjae Jeon:
 "Bug fixes:
   - Fix memory leak on mount failure with iocharset= option
   - Fix incorrect update of stream entry
   - Fix cluster range validation error

  Clean-ups:
   - Remove unused code and unneeded assignment
   - Rename variables in exfat structure as specification
   - Reorganize boot sector analysis code
   - Simplify exfat_utf8_d_hash and exfat_utf8_d_cmp()
   - Optimize exfat entry cache functions
   - Improve wording of EXFAT_DEFAULT_IOCHARSET config option

 New Feature:
   - Add boot region verification"

* tag 'exfat-for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: Fix potential use after free in exfat_load_upcase_table()
  exfat: fix range validation error in alloc and free cluster
  exfat: fix incorrect update of stream entry in __exfat_truncate()
  exfat: fix memory leak in exfat_parse_param()
  exfat: remove unnecessary reassignment of p_uniname->name_len
  exfat: standardize checksum calculation
  exfat: add boot region verification
  exfat: separate the boot sector analysis
  exfat: redefine PBR as boot_sector
  exfat: optimize dir-cache
  exfat: replace 'time_ms' with 'time_cs'
  exfat: remove the assignment of 0 to bool variable
  exfat: Remove unused functions exfat_high_surrogate() and exfat_low_surrogate()
  exfat: Simplify exfat_utf8_d_hash() for code points above U+FFFF
  exfat: Improve wording of EXFAT_DEFAULT_IOCHARSET config option
  exfat: Use a more common logging style
  exfat: Simplify exfat_utf8_d_cmp() for code points above U+FFFF

__get_kernel_nofault() didn't have the parentheses around the use of
'src' and 'dst' macro arguments, making the casts potentially do the
wrong thing.

The parentheses aren't necessary with the current very limited use in
mm/access.c, but it's bad form, and future use-cases might have very
unexpected errors as a result.

Do the same for unsafe_copy_loop() while at it, although in that case it
is an entirely internal x86 uaccess helper macro that isn't used
anywhere else and any other use would be invalid anyway.

Fixes: fa94111d ("x86: use non-set_fs based maccess routines")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make afs_zap_data() static as it's only used in the file in which it is
defined.
Signed-off-by: David Howells <dhowells@redhat.com>

Remove afs_zero_fid as it's not used.
Signed-off-by: David Howells <dhowells@redhat.com>

Fix a couple of %px to be %p in debugging statements.

Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept")
Fixes: 8a070a96 ("afs: Detect cell aliases 1 - Cells with root volumes")
Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>

Pull tracing updates from Steven Rostedt:
 "No new features this release. Mostly clean ups, restructuring and
  documentation.

   - Have ftrace_bug() show ftrace errors before the WARN, as the WARN
     will reboot the box before the error messages are printed if
     panic_on_warn is set.

   - Have traceoff_on_warn disable tracing sooner (before prints)

   - Write a message to the trace buffer that its being disabled when
     disable_trace_on_warning() is set.

   - Separate out synthetic events from histogram code to let it be used
     by other parts of the kernel.

   - More documentation on histogram design.

   - Other small fixes and clean ups"

* tag 'trace-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Remove obsolete PREEMPTIRQ_EVENTS kconfig option
  tracing/doc: Fix ascii-art in histogram-design.rst
  tracing: Add a trace print when traceoff_on_warning is triggered
  ftrace,bug: Improve traceoff_on_warn
  selftests/ftrace: Distinguish between hist and synthetic event checks
  tracing: Move synthetic events to a separate file
  tracing: Fix events.rst section numbering
  tracing/doc: Fix typos in histogram-design.rst
  tracing: Add hist_debug trace event files for histogram debugging
  tracing: Add histogram-design document
  tracing: Check state.disabled in synth event trace functions
  tracing/probe: reverse arguments to list_add
  tools/bootconfig: Add a summary of test cases and return error
  ftrace: show debugging information when panic_on_warn set

Merge tag 'linux-kselftest-kunit-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kunit updates from Shuah Khan:
 "This consists of:

   - Several config fragment fixes from Anders Roxell to improve test
     coverage.

   - Improvements to kunit run script to use defconfig as default and
     restructure the code for config/build/exec/parse from Vitor Massaru
     Iha and David Gow.

   - Miscellaneous documentation warn fix"

* tag 'linux-kselftest-kunit-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  security: apparmor: default KUNIT_* fragments to KUNIT_ALL_TESTS
  fs: ext4: default KUNIT_* fragments to KUNIT_ALL_TESTS
  drivers: base: default KUNIT_* fragments to KUNIT_ALL_TESTS
  lib: Kconfig.debug: default KUNIT_* fragments to KUNIT_ALL_TESTS
  kunit: default KUNIT_* fragments to KUNIT_ALL_TESTS
  kunit: Kconfig: enable a KUNIT_ALL_TESTS fragment
  kunit: Fix TabError, remove defconfig code and handle when there is no kunitconfig
  kunit: use KUnit defconfig by default
  kunit: use --build_dir=.kunit as default
  Documentation: test.h - fix warnings
  kunit: kunit_tool: Separate out config/build/exec/parse

Merge tag 'linux-kselftest-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:
 "This consists of:

   - Several fixes from Masami Hiramatsu to improve coverage for lib and
     sysctl tests.

   - Clean up to vdso test and a new test for getcpu() from Mark Brown.

   - Add new gen_tar selftests Makefile target generate selftest package
     running "make gen_tar" in selftests directory from Veronika
     Kabatova.

   - Other miscellaneous fixes to timens, exec, tpm2 tests"

* tag 'linux-kselftest-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/sysctl: Make sysctl test driver as a module
  selftests/sysctl: Fix to load test_sysctl module
  lib: Make test_sysctl initialized as module
  lib: Make prime number generator independently selectable
  selftests/ftrace: Return unsupported if no error_log file
  selftests/ftrace: Use printf for backslash included command
  selftests/timens: handle a case when alarm clocks are not supported
  Kernel selftests: Add check if TPM devices are supported
  selftests: vdso: Add a selftest for vDSO getcpu()
  selftests: vdso: Use a header file to prototype parse_vdso API
  selftests: vdso: Rename vdso_test to vdso_test_gettimeofday
  selftests/exec: Verify execve of non-regular files fail
  selftests: introduce gen_tar Makefile target

Merge even more updates from Andrew Morton:

 - a kernel-wide sweep of show_stack()

 - pagetable cleanups

 - abstract out accesses to mmap_sem - prep for mmap_sem scalability work

 - hch's user acess work

Subsystems affected by this patch series: debug, mm/pagemap, mm/maccess,
mm/documentation.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (93 commits)
  include/linux/cache.h: expand documentation over __read_mostly
  maccess: return -ERANGE when probe_kernel_read() fails
  x86: use non-set_fs based maccess routines
  maccess: allow architectures to provide kernel probing directly
  maccess: move user access routines together
  maccess: always use strict semantics for probe_kernel_read
  maccess: remove strncpy_from_unsafe
  tracing/kprobes: handle mixed kernel/userspace probes better
  bpf: rework the compat kernel probe handling
  bpf:bpf_seq_printf(): handle potentially unsafe format string better
  bpf: handle the compat string in bpf_trace_copy_string better
  bpf: factor out a bpf_trace_copy_string helper
  maccess: unify the probe kernel arch hooks
  maccess: remove probe_read_common and probe_write_common
  maccess: rename strnlen_unsafe_user to strnlen_user_nofault
  maccess: rename strncpy_from_unsafe_strict to strncpy_from_kernel_nofault
  maccess: rename strncpy_from_unsafe_user to strncpy_from_user_nofault
  maccess: update the top of file comment
  maccess: clarify kerneldoc comments
  maccess: remove duplicate kerneldoc comments
  ...

uprobe_write_opcode() must not cross page boundary; prepare_uprobe()
relies on arch_uprobe_analyze_insn() which should validate "vaddr" but
some architectures (csky, s390, and sparc) don't do this.

We can remove the BUG_ON() check in prepare_uprobe() and validate the
offset early in __uprobe_register(). The new IS_ALIGNED() check matches
the alignment check in arch_prepare_kprobe() on supported architectures,
so I think that all insns must be aligned to UPROBE_SWBP_INSN_SIZE.

Another problem is __update_ref_ctr() which was wrong from the very
beginning, it can read/write outside of kmap'ed page unless "vaddr" is
aligned to sizeof(short), __uprobe_register() should check this too.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

__read_mostly can easily be misused by folks, its not meant for just
read-only data.  There are performance reasons for using it, but we also
don't provide any guidance about its use.  Provide a bit more guidance
over its use.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200507161424.2584-1-mcgrof@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Allow the callers to distinguish a real unmapped address vs a range
that can't be probed.
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200521152301.2587579-24-hch@lst.deSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Provide arch_kernel_read and arch_kernel_write routines to implement the
maccess routines without messing with set_fs and without stac/clac that
opens up access to user space.

[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200521152301.2587579-20-hch@lst.deSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Provide alternative versions of probe_kernel_read, probe_kernel_write
and strncpy_from_kernel_unsafe that don't need set_fs magic, but instead
use arch hooks that are modelled after unsafe_{get,put}_user to access
kernel memory in an exception safe way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200521152301.2587579-19-hch@lst.deSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Move kernel access vs user access routines together to ease upcoming
ifdefs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200521152301.2587579-18-hch@lst.deSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>