- 28 Jan, 2017 18 commits
-
-
Jonathan Cameron authored
Immutable branch between MFD, IIO and PWM due for the v4.11 merge window Pulled into IIO to allow follow up series of triggered capture for the STM32 ADCs.
-
Andreas Klinger authored
Add sysfs-bus-iio-distance-srf08 for individual attributes of the driver, especially: - sensitivity which the device documentation calls gain for amplifying the signal - max_range for limiting the maximum distance for expected echos and therefore limiting the time waiting for telegrams Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Andreas Klinger authored
This is the IIO driver for devantech srf08 ultrasonic ranger which can be used to measure the distances to an object. The sensor supports I2C with some registers. Supported Features include: - read the distance in ranging mode in centimeters - output of the driver is directly the read value - together with the scale the driver delivers the distance in meters - only the first echo of the nearest object is delivered - set sensitivity as analog value in the range of 0-31 means setting gain register on device - set range registers; userspace enters max. range in millimeters in 43 mm steps Features not supported by this driver: - ranging mode in inches or in microseconds - ANN mode - change I2C address through this driver - light sensor The driver was added in the directory "proximity" of the iio subsystem and the menu in den config is now called "Proximity and distance sensors" Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Andreas Klinger authored
- Add DT binding for devantech,srf08 - Add vendor devantech to vendor list Signed-off-by: Andreas Klinger <ak@it-klinger.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Gwendal Grignou authored
Handle the barometer sensor presented by the ChromeOS EC Sensor hub. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Enric Balletbo Serra <enric.balletbo@collabora.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
William Breathitt Gray authored
The devm_ resource manager functions allow memory to be automatically released when a device is unbound. This patch takes advantage of the resource manager functions and replaces the gpiochip_add_data call and iio_device_register call with the devm_gpiochip_add_data call and devm_iio_device_register call respectively. In addition, the stx104_remove function has been removed as no longer necessary due to the use of the relevant devm_ resource manager functions. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Lorenzo Bianconi authored
Add st,drdy-int-pin property to select interrupt pin of the package Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Lorenzo Bianconi authored
Add capability to route data ready signal on pin 1 or pin 2 of the package Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Martin Blumenstingl authored
This adds support for the SAR (Successive Approximation Register) ADC on the Amlogic Meson SoCs. The code is based on the public S805 (Meson8b) and S905 (GXBB) datasheets (see [0] and [1]), as well as by reading (various versions of) the vendor driver and by inspecting the registers on the vendor kernels of my testing-hardware. Currently the GXBB, GXL and GXM SoCs are supported. GXBB hardware has 10-bit ADC resolution, while GXL and GXM have 12-bit ADC resolution. The code was written to support older SoCs (Meson8 and Meson8b) as well, but due to lack of actual testing-hardware no of_device_id was added for these. Two "features" from the vendor driver are currently missing: - the vendor driver uses channel #7 for calibration (this improves the accuracy of the results - in my tests the results were less than 3% off without calibration compared to the vendor driver). Adding support for this should be easy, but is not required for most applications. - channel #6 is connected to the SoCs internal temperature sensor. Adding support for this is probably not so easy since (based on the u-boot sources) most SoC versions are using different registers and algorithms for the conversion from "ADC value" to temperature. Supported by the hardware but currently not supported by the driver: - reading multiple channels at the same time (the hardware has a FIFO buffer which stores multiple results) - continuous sampling (this would require a way to enable this individually because otherwise the ADC would be drawing power constantly) - interrupt support (similar to the vendor driver this new driver is polling the results. It is unclear if the IRQ-mode is supported on older (Meson6 or Meson8) hardware as well or if there are any errata) [0] http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf [1] http://dn.odroid.com/S905/DataSheet/S905_Public_Datasheet_V1.1.4.pdfSigned-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Martin Blumenstingl authored
This adds the devicetree binding documentation for the SAR ADC found in Amlogic Meson SoCs. Currently only the GXBB, GXL and GXM SoCs are supported. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Julián de Gortari authored
Octal permissions should be used instead of symbolic ones for easier reading. Signed-off-by: Julián de Gortari <kiototeko@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Anthony Brandon authored
Align parameters to parentheses. Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Wei Yongjun authored
Use devm_iio_device_register() for IIO subsystem device registration and delete the remove function since there is no need after this change. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Wei Yongjun authored
Use devm_iio_device_register() for IIO subsystem device registration and delete the remove function since there is no need after this change. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Matt Weber authored
Add implementation for Maxim Integrated 5481, 5482, 5483, and 5484 digital potentiometer devices. Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX5481-MAX5484.pdfSigned-off-by: Maury Anderson <maury.anderson@rockwellcollins.com> Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Slawomir Stepien <sst@poczta.fm> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Manivannan Sadhasivam authored
This patch adds optional interrupt binding support for TI TMP007 - IR thermopiler sensor Signed-off-by: Manivannan Sadhasivam <manivannanece23@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Marek Vasut authored
Add IIO driver for the Renesas RCar GyroADC block. This block is a simple 4/8-channel ADC which samples 12/15/24 bits of data every cycle from all channels. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-renesas-soc@vger.kernel.org Cc: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
Marek Vasut authored
Add DT bindings for the Renesas RCar GyroADC block. This block is a simple 4/8-channel ADC which samples 12/15/24 bits of data every cycle from all channels. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-renesas-soc@vger.kernel.org Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Rob Herring <robh@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-
- 27 Jan, 2017 16 commits
-
-
Maxime Rossi Bellom authored
Replace a mix of tabs and spaces indentation by tabs only. Errors were reported by checkpatch.pl as WARNING: Statements should start on a tabstop WARNING: suspect code indent for conditional statement Signed-off-by: Maxime Rossi Bellom <mrossibellom@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
William Blough authored
Convert leading spaces to tabs Signed-off-by: William Blough <devel@blough.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
sayli karnik authored
This patch resolves the checkpatch issue: multiple assignments should be avoided Signed-off-by: sayli karnik <karniksayli1995@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Zoran authored
Initial cleanup of bcm2835-audio driver for the bcm2535(Raspberry PI) Driver provides HDMI audio through ALSA and is built on top of the vc04_services driver. Original version of the driver is available at: http://www.github.com/raspberry/linux Driver compiles without any build errors or warnings. Tested on a RPI 3 running in ARM64 mode with the vlc player and alsautils. Signed-off-by: Michael Zoran <mzoran@crowfest.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Vidal authored
Fields frag_size and playload_size of struct ieee80211_txb are encoded as short little-endian. This patch adds conversions to / from cpu byte order when copy / write these values in variables of architecture independent byte order. It also avoid a sparse type warning. Signed-off-by: Colin Vidal <colin@cvidal.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
simran singhal authored
This patch fixes the checkpatch issue by adding space after ','. Signed-off-by: simran singhal <singhalsimran0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
simran singhal authored
This patch fixes the checkpatch issue by adding space around '='. Signed-off-by: simran singhal <singhalsimran0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
=?UTF-8?q?Simon=20Sandstr=C3=B6m?= authored
Fix multiple checkpatch.pl warnings: function definition argument '...' should also have an identifier name Signed-off-by: Simon Sandström <simon@nikanor.nu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ernestas Kulik authored
Using octal permissions instead of symbolic ones is preferred. Signed-off-by: Ernestas Kulik <ernestas.kulik@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ernestas Kulik authored
Using octal permissions instead of symbolic ones is preferred. Signed-off-by: Ernestas Kulik <ernestas.kulik@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
The newly added function triggers a harmless warning: drivers/staging/lustre/lustre/ptlrpc/pack_generic.c: In function 'lustre_shrink_msg': drivers/staging/lustre/lustre/ptlrpc/pack_generic.c:472:1: error: control reaches end of non-void function [-Werror=return-type] This probably happens because LASSERTF() contains an 'unlikely()' that sometimes prevents gcc from analysing the control flow correctly. Adding a return statement here seems harmless and lets us keep that unlikely(). Fixes: 96049bd1 ("staging: lustre: ptlrpc: embed highest XID in each request") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sebastian Haas authored
Replace symbolic permissions with their octect representation to fix checkpatch warnings. Signed-off-by: Sebastian Haas <sehaas@deebas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Umang Raghuvanshi authored
Fix the following formatting issues: CHECK: Alignment should match open parenthesis Signed-off-by: Umang Raghuvanshi <u@umangis.me> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
The loopback driver allows the user to set a minimum delay of up to one second to be inserted between test iterations (i.e. request submissions). The delay is currently specified in microseconds and is implemented using udelay. Busy looping for long periods is not just anti-social; udelay must not be used for delays longer than a few milliseconds due to the risk of integer overflow. Replace the broken udelay with a usleep_range with a 100 us range for short delays (< 20 ms) and otherwise revert to using msleep. Fixes: b36f04fa ("greybus: loopback: Convert thread delay to microseconds") Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> # 4.9+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Franck Demathieu authored
It fixes the following issue reported by checkpatch.pl: Prefer kernel type 'u32' over 'uint32_t' Signed-off-by: Franck Demathieu <fdemathieu@gmail.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
This driver does not have a low-latency mode and should not report anything else. Also drop the skip-test flag which isn't used either. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 Jan, 2017 6 commits
-
-
Benjamin Gaignard authored
Timers IPs can be used to generate triggers for other IPs like DAC or ADC. Each trigger may result of timer internals signals like counter enable, reset or edge, this configuration could be done through "master_mode" device attribute. Since triggers could be used by DAC or ADC their names are defined in include/ nux/iio/timer/stm32-timer-trigger.h and is_stm32_iio_timer_trigger function could be used to check if the trigger is valid or not. "trgo" trigger have a "sampling_frequency" attribute which allow to configure timer sampling frequency. version 8: - change kernel version from 4.10 to 4.11 in ABI documentation version 7: - remove all iio_device related code - move driver into trigger directory version 5: - simplify tables of triggers - only create an IIO device when needed version 4: - get triggers configuration from "reg" in DT - add tables of triggers - sampling frequency is enable/disable when writing in trigger sampling_frequency attribute - no more use of interruptions version 3: - change compatible to "st,stm32-timer-trigger" - fix attributes access right - use string instead of int for master_mode and slave_mode - document device attributes in sysfs-bus-iio-timer-stm32 version 2: - keep only one compatible - use st,input-triggers-names and st,output-triggers-names to know which triggers are accepted and/or create by the device Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Benjamin Gaignard authored
Define bindings for STM32 timer trigger version 8: - reword "reg" parameter description version 4: - remove triggers enumeration from DT - add reg parameter version 3: - change file name - add cross reference with mfd bindings version 2: - only keep one compatible - add DT parameters to set lists of the triggers: one list describe the triggers created by the device another one give the triggers accepted by the device Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Benjamin Gaignard authored
This driver adds support for PWM driver on STM32 platform. The SoC have multiple instances of the hardware IP and each of them could have small differences: number of channels, complementary output, auto reload register size... version 9: - fix commit message header - remove one space MODULE_ALIAS version 8: - fix comments done by Thierry on version 7 version 6: - change st,breakinput parameter to make it usuable for stm32f7 too. version 4: - detect at probe time hardware capabilities - fix comments done on v2 and v3 - use PWM atomic ops version 2: - only keep one comptatible - use DT parameters to discover hardware block configuration Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Abdul Rauf authored
Fix the following errors: Use 4 digit octal (0777) not decimal permissions Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joseph Wright authored
Found by checkpatch: - s/cacluated/calculated/ - s/convertor/converter/ - s/psudo/pseudo/ - s/halfs/halves/ Signed-off-by: Joseph Wright <rjosephwright@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Amitesh Singh authored
There are multiple entries for ili9225 display defined in flexfb_chip_table array. remove duplicate entries and keep single entry. Signed-off-by: Amitesh Singh <singh.amitesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-