- 19 May, 2013 5 commits
-
-
Fernando Luis Vazquez Cao authored
commit c1e0ac19 upstream. It looks like the manual merge 0d69a3c7 ("Merge branches 'for-3.9/sony' and 'for-3.9/steelseries' into for-linus") accidentally removed Sony RF receiver with USB product id 0x0374 from the "have special driver" list, effectively nullifying a4649184 ("HID: add support for Sony RF receiver with USB product id 0x0374"). Add the device back to the list. Signed-off-by:
Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paolo Bonzini authored
commit 326f578f upstream. This is an almost-undocumented instruction available in 32-bit mode. I say "almost" undocumented because AMD documents it in their opcode maps just to say that it is unavailable in 64-bit mode (sections "A.2.1 One-Byte Opcodes" and "B.3 Invalid and Reassigned Instructions in 64-Bit Mode"). It is roughly equivalent to "sbb %al, %al" except it does not set the flags. Use fastop to emulate it, but do not use the opcode directly because it would fail if the host is 64-bit! Reported-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit 7fa57952 upstream. This is used by SGABIOS, KVM breaks with emulate_invalid_guest_state=1. It is just a MOV in disguise, with a funny source address. Reported-by:
-
Paolo Bonzini authored
commit a035d5c6 upstream. This is used by SGABIOS, KVM breaks with emulate_invalid_guest_state=1. AAM needs the source operand to be unsigned; do the same in AAD as well for consistency, even though it does not affect the result. Reported-by:
-
Gleb Natapov authored
commit 8d76c49e upstream. The invalid guest state emulation loop does not check halt_request which causes 100% cpu loop while guest is in halt and in invalid state, but more serious issue is that this leaves halt_request set, so random instruction emulated by vm86 #GP exit can be interpreted as halt which causes guest hang. Fix both problems by handling halt_request in emulation loop. Reported-by:
Tomas Papan <tomas.papan@gmail.com> Tested-by:
-
- 11 May, 2013 35 commits
-
-
Greg Kroah-Hartman authored
-
Chen Gang authored
commit 12b2f117 upstream. audit_trim_trees() calls get_tree(). If a failure occurs we must call put_tree(). [akpm@linux-foundation.org: run put_tree() before mutex_lock() for small scalability improvement] Signed-off-by:
Chen Gang <gang.chen@asianux.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by:
-
Trond Myklebust authored
commit c5a2a15f upstream. If a NFS client receives a delegation for a file after it has taken a lock on that file, we can currently end up in a situation where we mistakenly skip unlocking that file. The following patch swaps an erroneous check in nfs4_proc_unlck for whether or not the file has a delegation to one which checks whether or not we hold a lock stateid for that file. Reported-by:
Chuck Lever <Chuck.Lever@oracle.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by:
-
Dan Williams authored
commit 7fdb7846 upstream. A rebranded Novatel E371 for AT&T's LTE bands. qmi_wwan should drive this device, while cdc_ether should ignore it. Even though the USB descriptors are plain CDC-ETHER that USB interface is a QMI interface. Signed-off-by:
Dan Williams <dcbw@redhat.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Yinghai Lu authored
commit e253aaf0 upstream. Commit 4f535093 "PCI: Put pci_dev in device tree as early as possible" moved final fixups from pci_bus_add_device() to pci_device_add(). But pci_device_add() happens before resource assignment, so BARs may not be valid yet. Typical flow for hot-add: pciehp_configure_device pci_scan_slot pci_scan_single_device pci_device_add pci_fixup_device(pci_fixup_final, dev) # previous location # resource assignment happens here pci_bus_add_devices pci_bus_add_device pci_fixup_device(pci_fixup_final, dev) # new location [bhelgaas: changelog, move fixups to pci_bus_add_device()] Reference: https://lkml.kernel.org/r/20130415182614.GB9224@xanatosReported-by:
David Bulkow <David.Bulkow@stratus.com> Tested-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Srivatsa S. Bhat authored
commit c8c64d16 upstream. I get the following warning on boot: ------------[ cut here ]------------ WARNING: at drivers/base/core.c:575 device_create_file+0x9a/0xa0() Hardware name: -[8737R2A]- Write permission without 'store' ... </snip> Drilling down, this is related to dynamic channel ce_count attribute files sporting a S_IWUSR mode without a ->store() function. Looking around, it appears that they aren't supposed to have a ->store() function. So remove the bogus write permission to get rid of the warning. Signed-off-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> [ shorten commit message ] Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Josef Bacik authored
commit eb384b55 upstream. This is the same as the fix from commit Btrfs: fix bad extent logging but for O_DIRECT. I missed this when I fixed the problem originally, we were still using the em for the orig_start and orig_block_len, which would be the merged extent. We need to use the actual extent from the on disk file extent item, which we have to lookup to make sure it's ok to nocow anyway so just pass in some pointers to hold this info. Thanks, Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
-
Josef Bacik authored
commit 41b0fc42 upstream. A user reported a panic while running a balance. What was happening was he was relocating a block, which added the reference to the relocation tree. Then relocation would walk through the relocation tree and drop that reference and free that block, and then it would walk down a snapshot which referenced the same block and add another ref to the block. The problem is this was all happening in the same transaction, so the parent block was free'ed up when we drop our reference which was immediately available for allocation, and then it was used _again_ to add a reference for the same block from a different snapshot. This resulted in something like this in the delayed ref tree add ref to 90234880, parent=2067398656, ref_root 1766, level 1 del ref to 90234880, parent=2067398656, ref_root 18446744073709551608, level 1 add ref to 90234880, parent=2067398656, ref_root 1767, level 1 as you can see the ref_root's don't match, because when we inc the ref we use the header owner, which is the original tree the block belonged to, instead of the data reloc tree. Then when we remove the extent we use the reloc tree objectid. But none of this matters, since it is a shared reference which means only the parent matters. When the delayed ref stuff runs it adds all the increments first, and then does all the drops, to make sure that we don't delete the ref if we net a positive ref count. But tree blocks aren't allowed to have multiple refs from the same block, so this panics when it tries to add the second ref. We need the add and the drop to cancel each other out in memory so we only do the final add. So to fix this we need to adjust how the delayed refs are added to the tree. Only the ref_root matters when it is a normal backref, and only the parent matters when it is a shared backref. So make our decision based on what ref type we have. This allows us to keep the ref_root in memory in case anybody wants to use it for something else, and it allows the delayed refs to be merged properly so we don't end up with this panic. With this patch the users image no longer panics on mount, and it has a clean fsck after a normal mount/umount cycle. Thanks, Reported-by:
Roman Mamedov <rm@romanrm.ru> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 7fe70b57 upstream. ftrace_dump() had a lot of issues. What ftrace_dump() does, is when ftrace_dump_on_oops is set (via a kernel parameter or sysctl), it will dump out the ftrace buffers to the console when either a oops, panic, or a sysrq-z occurs. This was written a long time ago when ftrace was fragile to recursion. But it wasn't written well even for that. There's a possible deadlock that can occur if a ftrace_dump() is happening and an NMI triggers another dump. This is because it grabs a lock before checking if the dump ran. It also totally disables ftrace, and tracing for no good reasons. As the ring_buffer now checks if it is read via a oops or NMI, where there's a chance that the buffer gets corrupted, it will disable itself. No need to have ftrace_dump() do the same. ftrace_dump() is now cleaned up where it uses an atomic counter to make sure only one dump happens at a time. A simple atomic_inc_return() is enough that is needed for both other CPUs and NMIs. No need for a spinlock, as if one CPU is running the dump, no other CPU needs to do it too. The tracing_on variable is turned off and not turned on. The original code did this, but it wasn't pretty. By just disabling this variable we get the result of not seeing traces that happen between crashes. For sysrq-z, it doesn't get turned on, but the user can always write a '1' to the tracing_on file. If they are using sysrq-z, then they should know about tracing_on. The new code is much easier to read and less error prone. No more deadlock possibility when an NMI triggers here. Reported-by:
zhangwei(Jovi) <jovi.zhangwei@huawei.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Sachin Kamat authored
commit 9e48854c upstream. Instead of checking if num_encoders is zero, it is being assigned 0. Convert the assignment to a check. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit 441e76ca upstream. The code was mis-handling variable sized arrays. Reported-by:
Sylvain BERTRAND <sylware@legeek.net> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 62d1f92e upstream. Signed-off-by:
-
Alex Deucher authored
commit f8e6bfc2 upstream. If we have a empty power table, bail early and allocate the default power state. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=63865Signed-off-by:
-
Alex Deucher authored
commit beb71fc6 upstream. Reviwed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Alex Deucher authored
commit e884fc64 upstream. Just disabling the mem requests should be enough, but that doesn't seem to work correctly on efi systems. v2: blank displays first, then disable. Signed-off-by:
-
Jerome Glisse authored
commit 466476df upstream. This is slightly cleaned up version of Jerome's patch. There seems to be an issue tracking the last flush of the VM which results in hangs in certain cases when VM is used. For now just flush the VM for every IB. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=62959 https://bugs.freedesktop.org/show_bug.cgi?id=62997Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 79b52d6a upstream. Signed-off-by:
-
Alex Deucher authored
commit dcb85290 upstream. These chips were previously skipped since they are pre-R600. Signed-off-by:
-
Alex Deucher authored
commit 0cd9cb76 upstream. If we fail to map the mmio BAR, skip driver tear down that requires mmio. Should fix: https://bugzilla.kernel.org/show_bug.cgi?id=56541Signed-off-by:
-
Alex Deucher authored
commit 2e97be73 upstream. Avoids potential interrupt storms when the display is disabled. May fix: https://bugzilla.kernel.org/show_bug.cgi?id=56041Signed-off-by:
-
Alex Deucher authored
commit 18932a28 upstream. Signed-off-by:
-
Alex Deucher authored
commit abf1457b upstream. Just disabling the mem requests should be enough, but that doesn't seem to work correctly on efi systems. May fix: https://bugs.freedesktop.org/show_bug.cgi?id=57567 https://bugs.freedesktop.org/show_bug.cgi?id=43655 https://bugzilla.kernel.org/show_bug.cgi?id=56441 v2: blank displays first, then disable. Signed-off-by:
-
Alex Deucher authored
commit 2b48b968 upstream. Properly wait for the next vblank region. The previous code didn't always wait long enough depending on the timing. Signed-off-by:
-
Alex Deucher authored
commit 2f86e2ed upstream. Need to wait for the new addresses to take affect before re-enabling the MC. Signed-off-by:
-
Alex Deucher authored
commit 968c0166 upstream. Need to wait for the new addresses to take affect before re-enabling the MC. Signed-off-by:
-
Alex Deucher authored
commit 10257a6d upstream. Properly wait for the next vblank region. The previous code didn't always wait long enough depending on the timing. Signed-off-by:
-
Alex Deucher authored
commit bea5497b upstream. Properly wait for the next vblank region. The previous code didn't always wait long enough depending on the timing. Signed-off-by:
-
Alex Deucher authored
commit 7c1c7c18 upstream. A new tiling config register for the display blocks was added on DCE6. May fix: https://bugs.freedesktop.org/show_bug.cgi?id=62889 https://bugs.freedesktop.org/show_bug.cgi?id=57919Signed-off-by:
-
Alex Deucher authored
commit 367cbe2f upstream. Doesn't affect anything as the same address gets written in both cases. Signed-off-by:
-
Alex Deucher authored
commit 41167828 upstream. Monitors seem to prefer it. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=37696Signed-off-by:
-
Alex Deucher authored
commit bf05d998 upstream. It doesn't work reliably. Just report back the currently selected engine clock. Partially fixes: https://bugs.freedesktop.org/show_bug.cgi?id=62493Signed-off-by:
-
Zhang, Xiong Y authored
commit 43b27290 upstream. When ppgtt is enabled, dev_priv->gtt.total has excluded the gtt space occupied by ppgtt table in i915_gem_init_global_gtt() function. So the calculation of first_pd_entry_in_global_pt doesn't need to subtract I915_PPGTT_PD_ENTRIES again. Or else PPGTT directory table will be destroyed by global gtt allocation. This regression has been introduced in commit a54c0c27 Author: Ben Widawsky <ben@bwidawsk.net> Date: Thu Jan 24 14:45:00 2013 -0800 drm/i915: remove intel_gtt structure The breakage is pretty subtile since the old gtt_total_entries included the pde range, whereas the new on did not. Signed-off-by: Xiong Zhang<xiong.y.zhang@intel.com> [danvet: Add regression citation and cc: stable. Thanks to Chris for correcting my wrong guess about which commit broke things.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
David Müller authored
commit e4bfff54 upstream. As discussed in this thread http://lists.freedesktop.org/archives/dri-devel/2013-April/037411.html GMBUS based DVO transmitter detection seems to be unreliable which could result in an unusable DVO port. The attached patch fixes this by falling back to bit banging mode for the time DVO transmitter detection is in progress. Signed-off-by:
David Müller <d.mueller@elsoft.ch> Tested-by:
-
Daniel Vetter authored
commit b6c5164d upstream. Yet again our current confusion between doing the modeset globally, but only having the new parameters for one crtc at a time. So that intel_set_mode essentially already does a global modeset: intel_modeset_affected_pipes compares the current state with where we want to go to (which is carefully set up by intel_crtc_set_config) and then goes through the modeset sequence for any crtc which needs updating. Now the issue is that the actual interface with the remaining code still only works on one crtc, and so we only pass in one fb and one mode. In intel_set_mode we also only compute one intel_crtc_config (which should be the one for the crtc we're doing a modeset on). The reason for that mismatch is twofold: - We want to eventually do all modeset as global state changes, so it's just infrastructure prep. - But even the old semantics can change more than one crtc when you e.g. move a connector from crtc A to crtc B, then both crtc A and B need to be updated. Usually that means one pipe is disabled and the other enabled. This is also the reason why the hack doesn't touch the disable_pipes mask. Now hilarity ensued in our kms config restore paths when we actually try to do a modeset on all crtcs: If the first crtc should be off and the second should be on, then the call on the first crtc will notice that the 2nd one should be switched on and so tries to compute the pipe_config. But due to a lack of passed-in fb (crtc 1 should be off after all) it only results in tears. This case is ridiculously easy to hit on gen2/3 where the lvds output is restricted to pipe B. Note that before the pipe_config bpp rework gen2/3 didn't care really about the fb->depth, so this is a regression brought to light with commit 4e53c2e0 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Mar 27 00:44:58 2013 +0100 drm/i915: precompute pipe bpp before touching the hw But apparently Ajax also managed to blow up pch platforms, probably with some randomized configs, and pch platforms trip up over the lack of an fb even in the old code. So this actually goes back to the first introduction of the new modeset restore code in commit 45e2b5f6 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Nov 23 18:16:34 2012 +0100 drm/i915: force restore on lid open Fix this mess by now by justing shunting all the cool new global modeset logic in intel_modeset_affected_pipes. v2: Improve commit message and clean up all the comments in intel_modeset_affected_pipes - since the introduction of the modeset restore code they've been a bit outdated. Bugzill: https://bugzilla.redhat.com/show_bug.cgi?id=917725 References: http://www.mail-archive.com/stable@vger.kernel.org/msg38084.htmlTested-by:
Richard Cochran <richardcochran@gmail.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Paulo Zanoni authored
commit c40c0f5b upstream. We may have DDI_BUF_CTL(PORT_A) configured with 2 lanes and still not have CRT, so just check for !IS_ULT. This problem happened on a real machine and resulted in a very ugly dmesg. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
