- 30 Oct, 2017 1 commit
-
-
Ville Syrjälä authored
The HDMI level shifter value should be 5 bits and the max data rate 3 bits. Cc: Jani Nikula <jani.nikula@intel.com> Reported-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171027201738.3640-1-ville.syrjala@linux.intel.comReviewed-by:
-
- 27 Oct, 2017 14 commits
-
-
Ville Syrjälä authored
Move the crtc state related 12bpc checks into hdmi_12bpc_possible() since that one already examines other parts of the crtc state. Note that we can drop the !force_dvi check since crtc_state->has_hdmi_sink already accounts for that. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
Ville Syrjälä authored
DP dongles may signal downstream HPD via short HPD pulses. Setting the sink to DPMS off apparently kills the downstream HPD (at least on my DP->VGA dongle), so skip the DPMS off for such dongles when we turn off the port. v2: Deal with DDI as well by moving the check into intel_dp_sink_dpms() (Dhinakaran) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Pablo <pablodebiase@nanalysis.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103472 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99114Signed-off-by: -
Ville Syrjälä authored
Call the DDI .pre_pll_enable() hook from the MST code so that BXT gets the correct lane latency optimal setting applied. And we obviously need to compute the correct value, and read it out to keep the state checker happy. While at it drop the useless 'encoder' parameter to bxt_ddi_phy_calc_lane_lat_optim_mask() Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Ville Syrjälä authored
intel_ddi_enable_transcoder_func() already has the crtc state so we can use that instead of the untrustworthy encoder->type. Signed-off-by:
-
Ville Syrjälä authored
encoder->type is not realiable for DP/HDMI so let's switch the DPLL selection over to using output_types. Signed-off-by:
-
Ville Syrjälä authored
Eliminate intel_prepare_dp_ddi_buffers()'s reliance on the encoder->type by passing in the crtc state. Signed-off-by:
-
Ville Syrjälä authored
encoder->type isn't reliable for DP/HDMI so instead extract the correct type from the crtc state in intel_ddi_set_pipe_settings(). Signed-off-by:
-
Chris Wilson authored
Kasan spotted [IGT] gem_tiled_pread_pwrite: exiting, ret=0 ================================================================== BUG: KASAN: use-after-free in __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] Read of size 8 at addr ffff8801359da310 by task kworker/3:2/182 CPU: 3 PID: 182 Comm: kworker/3:2 Tainted: G U 4.14.0-rc6-CI-Custom_3340+ #1 Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 Workqueue: events __i915_gem_free_work [i915] Call Trace: dump_stack+0x68/0xa0 print_address_description+0x78/0x290 ? __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] kasan_report+0x23d/0x350 __asan_report_load8_noabort+0x19/0x20 __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] ? i915_gem_object_truncate+0x100/0x100 [i915] ? lock_acquire+0x380/0x380 __i915_gem_object_put_pages+0x30d/0x530 [i915] __i915_gem_free_objects+0x551/0xbd0 [i915] ? lock_acquire+0x13e/0x380 __i915_gem_free_work+0x4e/0x70 [i915] process_one_work+0x6f6/0x1590 ? pwq_dec_nr_in_flight+0x2b0/0x2b0 worker_thread+0xe6/0xe90 ? pci_mmcfg_check_reserved+0x110/0x110 kthread+0x309/0x410 ? process_one_work+0x1590/0x1590 ? kthread_create_on_node+0xb0/0xb0 ret_from_fork+0x27/0x40 Allocated by task 1801: save_stack_trace+0x1b/0x20 kasan_kmalloc+0xee/0x190 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0xdc/0x2e0 radix_tree_node_alloc.constprop.12+0x48/0x330 __radix_tree_create+0x274/0x480 __radix_tree_insert+0xa2/0x610 i915_gem_object_get_sg+0x224/0x670 [i915] i915_gem_object_get_page+0xb5/0x1c0 [i915] i915_gem_pread_ioctl+0x822/0xf60 [i915] drm_ioctl_kernel+0x13f/0x1c0 drm_ioctl+0x6cf/0x980 do_vfs_ioctl+0x184/0xf30 SyS_ioctl+0x41/0x70 entry_SYSCALL_64_fastpath+0x1c/0xb1 Freed by task 37: save_stack_trace+0x1b/0x20 kasan_slab_free+0xaf/0x190 kmem_cache_free+0xbf/0x340 radix_tree_node_rcu_free+0x79/0x90 rcu_process_callbacks+0x46d/0xf40 __do_softirq+0x21c/0x8d3 The buggy address belongs to the object at ffff8801359da0f0 which belongs to the cache radix_tree_node of size 576 The buggy address is located 544 bytes inside of 576-byte region [ffff8801359da0f0, ffff8801359da330) The buggy address belongs to the page: page:ffffea0004d67600 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000008100(slab|head) raw: 8000000000008100 0000000000000000 0000000000000000 0000000100110011 raw: ffffea0004b52920 ffffea0004b38020 ffff88015b416a80 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc ^ ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint which looks like the slab containing the radixtree iter was freed as we traversed the tree, taking the rcu read lock across the loop should prevent that (deferring all the frees until the end). Reported-by:Tomi Sarvela <tomi.p.sarvela@intel.com> Fixes: d1b48c1e ("drm/i915: Replace execbuf vma ht with an idr") Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com>
-
Chris Wilson authored
Kasan spotted [IGT] gem_tiled_pread_pwrite: exiting, ret=0 ================================================================== BUG: KASAN: use-after-free in __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] Read of size 8 at addr ffff8801359da310 by task kworker/3:2/182 CPU: 3 PID: 182 Comm: kworker/3:2 Tainted: G U 4.14.0-rc6-CI-Custom_3340+ #1 Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 Workqueue: events __i915_gem_free_work [i915] Call Trace: dump_stack+0x68/0xa0 print_address_description+0x78/0x290 ? __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] kasan_report+0x23d/0x350 __asan_report_load8_noabort+0x19/0x20 __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] ? i915_gem_object_truncate+0x100/0x100 [i915] ? lock_acquire+0x380/0x380 __i915_gem_object_put_pages+0x30d/0x530 [i915] __i915_gem_free_objects+0x551/0xbd0 [i915] ? lock_acquire+0x13e/0x380 __i915_gem_free_work+0x4e/0x70 [i915] process_one_work+0x6f6/0x1590 ? pwq_dec_nr_in_flight+0x2b0/0x2b0 worker_thread+0xe6/0xe90 ? pci_mmcfg_check_reserved+0x110/0x110 kthread+0x309/0x410 ? process_one_work+0x1590/0x1590 ? kthread_create_on_node+0xb0/0xb0 ret_from_fork+0x27/0x40 Allocated by task 1801: save_stack_trace+0x1b/0x20 kasan_kmalloc+0xee/0x190 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0xdc/0x2e0 radix_tree_node_alloc.constprop.12+0x48/0x330 __radix_tree_create+0x274/0x480 __radix_tree_insert+0xa2/0x610 i915_gem_object_get_sg+0x224/0x670 [i915] i915_gem_object_get_page+0xb5/0x1c0 [i915] i915_gem_pread_ioctl+0x822/0xf60 [i915] drm_ioctl_kernel+0x13f/0x1c0 drm_ioctl+0x6cf/0x980 do_vfs_ioctl+0x184/0xf30 SyS_ioctl+0x41/0x70 entry_SYSCALL_64_fastpath+0x1c/0xb1 Freed by task 37: save_stack_trace+0x1b/0x20 kasan_slab_free+0xaf/0x190 kmem_cache_free+0xbf/0x340 radix_tree_node_rcu_free+0x79/0x90 rcu_process_callbacks+0x46d/0xf40 __do_softirq+0x21c/0x8d3 The buggy address belongs to the object at ffff8801359da0f0 which belongs to the cache radix_tree_node of size 576 The buggy address is located 544 bytes inside of 576-byte region [ffff8801359da0f0, ffff8801359da330) The buggy address belongs to the page: page:ffffea0004d67600 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000008100(slab|head) raw: 8000000000008100 0000000000000000 0000000000000000 0000000100110011 raw: ffffea0004b52920 ffffea0004b38020 ffff88015b416a80 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc ^ ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint which looks like the slab containing the radixtree iter was freed as we traversed the tree, taking the rcu read lock across the loop should prevent that (deferring all the frees until the end). Reported-by: -
Chris Wilson authored
An interesting snippet from Sandybridge's prm: "Although a Ring Buffer can be enabled in the non-empty state, it must not be disabled unless it is empty. Attempting to disable a Ring Buffer in the non-empty state is UNDEFINED." Let's avoid the undefined behaviour as we disable the rings prior to reset and resume. v2: Tell HEAD to catch up to TAIL (empty ring) first, then reset both to 0 (supposedly while stopped). Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171027094311.30380-1-chris@chris-wilson.co.uk
-
Jani Nikula authored
Some minor drive-by cleanups. Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Jani Nikula authored
Per my reading of the eDP spec, DP_DPCD_DISPLAY_CONTROL_CAPABLE bit in DP_EDP_CONFIGURATION_CAP should be set if the eDP display control registers starting at offset DP_EDP_DPCD_REV are "enabled". Currently we check the bit before reading the registers, and DP_EDP_DPCD_REV is the only way to detect eDP revision. Turns out there are (likely buggy) displays that require eDP 1.4+ features, such as supported link rates and link rate select, but do not have the bit set. Read the display control registers unconditionally. They are supposed to read zero anyway if they are not supported, so there should be no harm in this. This fixes the referenced bug by enabling the eDP version check, and thus reading of the supported link rates. The panel in question has 0 in DP_MAX_LINK_RATE which is only supported in eDP 1.4+. Without the supported link rates method we default to RBR which is insufficient for the panel native mode. As a curiosity, the panel also has a bogus value of 0x12 in DP_EDP_DPCD_REV, but that passes our check for >= DP_EDP_14 (which is 0x03). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103400Reported-and-tested-by:
Nicolas P. <issun.artiste@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by:
-
Maarten Lankhorst authored
The watermarks it should calculate against are the old optimal watermarks. The currently active crtc watermarks are pure fiction, and are invalid in case of a nonblocking modeset, page flip enabling/disabling planes or any other reason. When the crtc is disabled or during a modeset the intermediate watermarks don't need to be programmed separately, and could be directly assigned to the optimal watermarks. Changes since v1: - Use intel_atomic_get_old_crtc_state. (ville) Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-2-maarten.lankhorst@linux.intel.com [mlankhorst: Add cc stable and bugzilla link, since previous patch doesn't fix issue by itself] Cc: stable@vger.kernel.org #v4.8+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373
-
Maarten Lankhorst authored
The original intent was to preserve watermarks as much as possible in intel_pipe_wm.raw_wm, and put the validated ones in intel_pipe_wm.wm. It seems this approach is insufficient and we don't always preserve the raw watermarks, so just use the atomic iterator we're already using to get a const pointer to all bound planes on the crtc. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373Signed-off-by:
-
- 26 Oct, 2017 16 commits
-
-
Manasi Navare authored
During modeset cleanup on driver unload we may have a pending hotplug work. This needs to be canceled early during the teardown so that it does not fire after we have freed the connector. We do this after drm_kms_helper_poll_fini(dev) since this might trigger modeset retry work due to link retrain and before intel_fbdev_fini() since this work requires the lock from fbdev. If this is not done we may see something like: DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) ------------[ cut here ]------------ WARNING: CPU: 4 PID: 5010 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x4e/0x60 Modules linked in: i915(-) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm vgem ax88179_178 +a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e ptp pps_core prime_numbers i2c_hid +[last unloaded: snd_hda_intel] CPU: 4 PID: 5010 Comm: drv_module_relo Tainted: G U 4.14.0-rc3-CI-CI_DRM_3186+ #1 Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWX1.R00.X104.A03.1709140524 09/14/2017 task: ffff8803c827aa40 task.stack: ffffc90000520000 RIP: 0010:mutex_destroy+0x4e/0x60 RSP: 0018:ffffc90000523d58 EFLAGS: 00010292 RAX: 000000000000002a RBX: ffff88044fbef648 RCX: 0000000000000000 RDX: 0000000080000001 RSI: 0000000000000001 RDI: ffffffff810f0cf0 RBP: ffffc90000523d60 R08: 0000000000000001 R09: 0000000000000001 R10: 000000000f21cb81 R11: 0000000000000000 R12: ffff88044f71efc8 R13: ffffffffa02b3d20 R14: ffffffffa02b3d90 R15: ffff880459b29308 FS: 00007f5df4d6e8c0(0000) GS:ffff88045d300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055ec51f00a18 CR3: 0000000451782006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: drm_fb_helper_fini+0xd9/0x130 intel_fbdev_destroy+0x12/0x60 [i915] intel_fbdev_fini+0x28/0x30 [i915] intel_modeset_cleanup+0x45/0xa0 [i915] i915_driver_unload+0x92/0x180 [i915] i915_pci_remove+0x19/0x30 [i915] i915_driver_unload+0x92/0x180 [i915] i915_pci_remove+0x19/0x30 [i915] pci_device_remove+0x39/0xb0 device_release_driver_internal+0x15d/0x220 driver_detach+0x40/0x80 bus_remove_driver+0x58/0xd0 driver_unregister+0x2c/0x40 pci_unregister_driver+0x36/0xb0 i915_exit+0x1a/0x8b [i915] SyS_delete_module+0x18c/0x1e0 entry_SYSCALL_64_fastpath+0x1c/0xb1 RIP: 0033:0x7f5df3286287 RSP: 002b:00007fff8e107cc8 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: ffffffff81493a03 RCX: 00007f5df3286287 RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000564c7be02e48 RBP: ffffc90000523f88 R08: 0000000000000000 R09: 0000000000000080 R10: 00007f5df4d6e8c0 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fff8e107eb0 R14: 0000000000000000 R15: 0000000000000000 Or a GPF like: general protection fault: 0000 [#1] PREEMPT SMP Modules linked in: i915(-) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm vgem ax88179_178 +a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e ptp pps_core prime_numbers i2c_hid +[last unloaded: snd_hda_intel] CPU: 0 PID: 82 Comm: kworker/0:1 Tainted: G U W 4.14.0-rc3-CI-CI_DRM_3186+ #1 Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWX1.R00.X104.A03.1709140524 09/14/2017 Workqueue: events intel_dp_modeset_retry_work_fn [i915] task: ffff88045a5caa40 task.stack: ffffc90000378000 RIP: 0010:drm_setup_crtcs+0x143/0xbf0 RSP: 0018:ffffc9000037bd20 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000780 RDI: 00000000ffffffff RBP: ffffc9000037bdb8 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000780 R11: 0000000000000000 R12: 0000000000000002 R13: ffff88044fbef4e8 R14: 0000000000000780 R15: 0000000000000438 FS: 0000000000000000(0000) GS:ffff88045d200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055ec51ee5168 CR3: 000000044c89d003 CR4: 00000000003606f0 Call Trace: drm_fb_helper_hotplug_event.part.18+0x7e/0xc0 drm_fb_helper_hotplug_event+0x1a/0x20 intel_fbdev_output_poll_changed+0x1a/0x20 [i915] drm_kms_helper_hotplug_event+0x27/0x30 intel_dp_modeset_retry_work_fn+0x77/0x80 [i915] process_one_work+0x233/0x660 worker_thread+0x206/0x3b0 kthread+0x152/0x190 ? process_one_work+0x660/0x660 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x27/0x40 Code: 06 00 00 45 8b 45 20 31 db 45 31 e4 45 85 c0 0f 8e 91 06 00 00 44 8b 75 94 44 8b 7d 90 49 8b 45 28 49 63 d4 44 89 f6 41 83 c4 01 <48> 8b 04 d0 44 +89 fa 48 8b 38 48 8b 87 a8 01 00 00 ff 50 20 01 RIP: drm_setup_crtcs+0x143/0xbf0 RSP: ffffc9000037bd20 ---[ end trace 08901ff1a77d30c7 ]--- v2: * Rename it to intel_hpd_poll_fini() and call drm_kms_helper_fini() inside it as the first step before cancel work (Chris Wilson) * Add GPF trace in commit message and make the function static (Maarten Lankhorst) Suggested-by:
-
Chris Wilson authored
Recently W=1 on gcc-7.2 (-Wunused-const-variable) caught a regression that had been lurking for 6 months, so lets try enabling the full set of warnings for CI builds. This means more patches will be rejected early that contain trivial and sometimes not so trivial bugs. However, our code does not yet compile cleanly with W=1, so we have to apply a filter to the set of warnings until we can eliminate the mistakes. It also means that developers will have to be running the full gamut of gcc to ensure that as warnings come and go with gcc updates, we have the CI build prepared. v2: Use fine-grained -Wno overrides. Inside the makefile, we can specify CFLAGS on a per-object level, which allows us to limit the scope of any particular warning override. v3: Place per-file overrides after the main enabling block. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171024181547.27889-1-chris@chris-wilson.co.ukAcked-by:
-
Chris Wilson authored
Knowing the RING_MODE flags is useful for checking the state of the engine, such as whether the CS is idle after trying to stop the engines before reset. Signed-off-by:
-
Michal Wajdeczko authored
Waiting for DMA status register can be done with dedicated function. Lets use it as additional bonus will be smaller driver footprint. Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
-
Michał Winiarski authored
Pretty similar to what we have on execlists. We're reusing most of the GEM code, however, due to GuC quirks we need a couple of extra bits. Preemption is implemented as GuC action, and actions can be pretty slow. Because of that, we're using a mutex to serialize them. Since we're requesting preemption from the tasklet, the task of creating a workitem and wrapping it in GuC action is delegated to a worker. To distinguish that preemption has finished, we're using additional piece of HWSP, and since we're not getting context switch interrupts, we're also adding a user interrupt. The fact that our special preempt context has completed unfortunately doesn't mean that we're ready to submit new work. We also need to wait for GuC to finish its own processing. v2: Don't compile out the wait for GuC, handle workqueue flush on reset, no need for ordered workqueue, put on a reviewer hat when looking at my own patches (Chris) Move struct work around in intel_guc, move user interruput outside of conditional (Michał) Keep ring around rather than chase though intel_context v3: Extract WA for flushing ggtt writes to a helper (Chris) Keep work_struct in intel_guc rather than engine (Michał) Use ordered workqueue for inject_preempt worker to avoid GuC quirks. v4: Drop now unused INTEL_GUC_PREEMPT_OPTION_IMMEDIATE (Daniele) Drop stray newlines, use container_of for intel_guc in worker, check for presence of workqueue when flushing it, rather than enable_guc_submission modparam, reorder preempt postprocessing (Chris) v5: Make wq NULL after destroying it v6: Swap struct guc_preempt_work members (Michał) Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Michał Winiarski authored
We would also like to make use of execlist_cancel_port_requests and unwind_incomplete_requests in GuC preemption backend. Let's rename the functions to use the correct prefixes, so that we can simply add the declarations in the following patch. Similar thing for applies for can_preempt, except we're introducing HAS_LOGICAL_RING_PREEMPTION macro instad, converting other users that were previously touching device info directly. v2: s/intel_engine/execlists and pass execlists to unwind (Chris) v3: use locked version for exporting, drop const qual (Chris) Signed-off-by:
-
Michał Winiarski authored
We also want to support preemption with GuC submission backend. In order to do that, we need to remember the priority, like we do on execlists path. v2: Remove completed prio == INT_MAX optimization Signed-off-by:
-
Michał Winiarski authored
We shouldn't inspect ELSP context status (or any other bits depending on specific submission backend) when using GuC submission. Let's use another piece of HWSP for preempt context, to write its bit of information, meaning that preemption has finished, and hardware is now idle. Signed-off-by:
Jeff McGee <jeff.mcgee@intel.com> Signed-off-by:
-
Michał Winiarski authored
Let's separate the "emit" part from touching any internal structures, this way we can have a generic "emit coherent GGTT write" function. We would like to reuse this functionality for emitting HWSP write, to confirm that preempt-to-idle has finished. v2: Reorder args to match emit_pipe_control, s/render/rcs (Chris) Signed-off-by:
-
Michał Winiarski authored
We're using a special preempt context for HW to preempt into. We don't want to emit any requests there, but we still need to wrap this context into a valid GuC work item. Let's cleanup the functions operating on GuC work items. We can extract guc_request_add - responsible for adding GuC work item and ringing the doorbell, and guc_wq_item_append - used by the function above, not tied to the concept of gem request. Signed-off-by:
-
Dave Gordon authored
This second client is created with priority KMD_HIGH, and marked as preemptive. This will allow us to request preemption using GuC actions. v2: Extract clients creation into a helper, debugfs fixups. (Michał) Recreate doorbell on init. (Daniele) Move clients into an array. v3: And move clients back from an array, to get rid of the enum (Michał) v4: Use is_high_priority, move DRM_ERROR into __create_doorbell, move GEM_BUG_ON inside guc_clients_create (Michał) v5: Split the BUG_ON (Michał) v6: Cleanup after error during doorbell reinit (Michał) Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Signed-off-by:
-
Michał Winiarski authored
We're using GuC action to request preemption. However, after requesting preemption we need to wait for GuC to finish its own post-processing before we start submitting our requests. Firmware is using shared context to report its status. Let's update GuC firmware interface with those new definitions. v2: Drop unused INTEL_GUC_PREEMPT_OPTION_IMMEDIATE Signed-off-by:
-
Michał Winiarski authored
We were using first page of kernel context render state for sharing data with GuC. While it's justified by the fact that those pages are not used (note, GuC still enforces this layout and refuses to work if we remove the extra page in front), it's also confusing (why are we using this particular page?). Let's allocate a separate object instead. v2: Drop kernel_context from GuC suspend/resume action handlers (Michel) Suggested-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Michał Winiarski authored
Since it's a two-step process, we can have a cleaner error handling in the caller if we do the allocations in a helper. Signed-off-by:
-
Michał Winiarski authored
Apparently, this value is reserved and may be interpreted as changing doorbell ownership. Even though we're not observing any side effects now, let's skip over it to be consistent with the spec. v2: Apply checkpatch (Sagar) Suggested-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
CNL adds an extra register for slice/subslice information. Although no SKU is planed with an extra slice let's already handle this extra piece of information so we don't have the risk in future of getting a part that might have chosen this part of the die instead of other slices or anything like that. Also if subslice is disabled the information of eu ack for that is garbage, so let's skip checks for eu if subslice is disabled as we skip the subslice if slice is disabled. The rest is pretty much like gen9. v2: Remove IS_CANNONLAKE from gen9 status function. v3: Consider s_max = 6 and ss_max=4 to run over all possible slices and subslices possible by spec. Although no real hardware will have that many slices/subslices. To match with sseu info init. v4: Fix offset calculation for slices 4 and 5. Removed Oscar's rv-b since this change also needs review. v5: Let's consider only valid bits for SLICE*_PGCTL_ACK. This looks like wrong in Spec, but seems to be enough for now. Whenever Spec gets updated and fixed we come back and properly update the masks. Also add a FIXME, so we can revisit this later when we find some strange info on debugfs or when we noitce spec got updated. Cc: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171026001546.28203-1-rodrigo.vivi@intel.com
-
- 25 Oct, 2017 9 commits
-
-
Michał Winiarski authored
Now that we're handling request resubmission the same way as regular submission (from the tasklet), we can move GuC initialization earlier, before restarting the engines. This way, we're no longer being in the state of flux during engine restart - we're already in user requested submission mode. Signed-off-by:
-
Chris Wilson authored
The execlists emulation on top of the GuC (used for scheduling and preemption) depends on the MI_USER_INTERRUPT for its notifications and tasklet action. As we always employ the irq, there is no advantage in ever disabling it while we are using the GuC, so allow us to arm the breadcrumb irq when enabling GuC submission and disarm upon disabling. The impact should be lessened by the delayed irq disabling we do (we only disable after receiving an interrupt for which no one was wanting), but allowing guc to explicitly manage the irq in relation to itself is simpler and prevents an issue with losing an interrupt for preemption as it is not coupled to an active request. Internally, we add a reference counter (breadcrumbs.irq_enabled) as a simple mechanism to allow GuC to keep the breadcrumb irq enabled. To improve upon always enabling the irq while guc is selected, we need to hook into the parking facility of intel_engines so that we only enable the breadcrumbs while the GT is active (one step better would be to individually park/unpark each engine). In effect, this means that we keep the breadcrumb irq always enabled for the entire duration the guc is busy, whereas before we would try to switch it off whenever we idled for more than interrupt with no associated waiters. The difference *should* be negligible in practice! v2: Stop abusing fence signaling (and its auxiliary data structures) to enable the breadcrumbs irqs. Signed-off-by:
-
Chris Wilson authored
In the next patch, we will want to install a callback when the engines (GT as a whole) become idle and similarly when they first become busy. To enable that callback, first rename intel_engines_mark_idle() to intel_engines_park() and provide the companion intel_engines_unpark(). Signed-off-by:
-
Rodrigo Vivi authored
This is heavily based on a initial patch provided by Ville plus all changes provided later by Ander. As Geminilake, Cannonlake also supports 2 pixels per clock. Different from Geminilake we are not implementing the 99% Wa. But we can revisit that decision later if we find out any limitation on later CNL SKUs. v2: Rebase on top of commit 'd305e061 ("drm/i915: Track minimum acceptable cdclk instead of "minimum dotclock")' v3: When fixing HDMI on CNL I noticed that I missed to convert back the doubled pixel rate to cdclk. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003223142.26264-1-rodrigo.vivi@intel.com
-
Joonas Lahtinen authored
When running under virtualization (vGPU active), we must disable the lazy PPGTT page table initialization optimization introduced by commit 14826673 ("drm/i915: Only initialize partially filled pagetables"). We must do this because GVT-g makes unduly assumptions about guest behaviour, which this optimization breaks. This results in following looking errors in the host: ERROR gvt: guest page write error -22, gfn 0x7ada8, pa 0x7ada89a8, var 0x6, len 1 The real fix is to not to depend on i915 driver behaviour, but instead either rely on only the contracts that i915 has with the hardware, or add some paravirtualization. While the real fix is en route, it won't be finished in time for 4.15, so the best option is to disable the optimization for now when vGPU is active to avoid breaking 4.15 guests in existing VM environments. Fixes: 14826673 ("drm/i915: Only initialize partially filled pagetables") Suggested-by:
Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171023153209.10527-1-joonas.lahtinen@linux.intel.com
-
Chris Wilson authored
This reverts commit 6d0dbd30. timer_setup_on_stack() does not yet exist: In file included from drivers/gpu/drm/i915/i915_sw_fence.c:517:0: drivers/gpu/drm/i915/selftests/lib_sw_fence.c: In function ‘timed_fence_init’: drivers/gpu/drm/i915/selftests/lib_sw_fence.c:63:2: error: implicit declaration of function ‘timer_setup_on_stack’; did you mean ‘hrtimer_init_on_stack’? [-Werror=implicit-function-declaration] timer_setup_on_stack(&tf->timer, timed_fence_wake, 0); Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171024151344.GA104417@beastReviewed-by:
-
Chris Wilson authored
During evict, we wish to idle the GPU if we see that the GGTT is full. However, our test for idle in i915_gem_evict_something() and in i915_gem_switch_to_kernel_context() do not match leading to disappointment - we never believe that we are idle and keep trying to flush the GGTT ad infinitum. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103438Signed-off-by:
-
Chris Wilson authored
Instead of trying to create a timer with zero delay (i.e. with expires set to the current jiffies and not the future, an already expired timer), execute that request immediately. v2: Refactor list_del_init+signal into its own little function. v3: Reorder testing so as not to immediately signal a delayed request. Signed-off-by:
-
