- 12 Oct, 2007 40 commits
-
-
Matthew Wilcox authored
The ULD ->done callback moves into the scsi_driver. By moving the call to scsi_io_completion() from scsi_blk_pc_done() to scsi_finish_command(), we can eliminate the latter entirely. By returning 'good_bytes' from the ->done callback (rather than invoking scsi_io_completion()), we can stop exporting scsi_io_completion(). Also move the prototypes from sd.h to sd.c as they're all internal anyway. Rename sd_rw_intr to sd_done and rw_intr to sr_done. Inspired-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
Matthew Wilcox <willy@linux.intel.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
The ->done member was being used to mark commands as being internal. I decided to put a magic number in ->underflow instead. I believe this to be safe as no current user of ->underflow has any of the bottom 9 bits set. Signed-off-by:
-
Matthew Wilcox authored
By configuring targets in slave_configure, we can eliminate a shadow queuecommand, a shadow scsi_done, a write to the host template, abuse of SCp->Message and SCp->Status, a use of kmap_atomic() and sniffing the results of INQUIRY. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Rob Landley authored
Update Documentation/scsi/00-INDEX to match current files. Signed-off-by:
Rob Landley <rob@landley.net> Signed-off-by:
-
Jeff Garzik authored
The SSP response DPRINTK in asd_get_response_tasklet() was printing a hardcoded status result, rather than the status from the SSP response IU. Arguably, this should not be a DPRINTK either, since the admin might want to know about this. Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Eric Moore authored
drivers/message/fusion/mptctl.c: In function ‘mptctl_mpt_command’: drivers/message/fusion/mptctl.c:1764: warning: ‘bufIn.len’ may be used uninitialized in this function drivers/message/fusion/mptctl.c:1765: warning: ‘bufOut.len’ may be used uninitialized in this function come because gcc gets confused by some "goto" statements in above function. The warnings have been verified to be bogus, however, the function does initialize these later (after the offending goto's) in the function anyway. So let's move those initializations to top of function, thereby also shutting up these warnings. Signed-off-by:
Eric Moore <Eric.Moore@lsi.com> Signed-off-by:
Satyam Sharma <satyam@infradead.org> Signed-off-by:
-
Eric Moore authored
NB = number of blocks. This represents the number of blocks to transfer. The block size is based on the message frame size provided in the ioc_facts. A value of zero indicates the entire message frame should be copied. This is two bit value. So by setting this to non-zero vaule, you increase performance by reducing amount of data needing to be dma'd. The value that is stored in ioc->ReqeustNB is sometimes a non-zero vaule, which creates a bug in mptlan, where not the entire message frame is getting transfer to firware, resulting in corruption. This fix sets the default to zero, thus entire message frame is copied. Signed-off-by:
-
Eric Moore authored
Cleaning up prints that use the xxx_printk API, in that the fusion preamble "mptbase: iocX" follows the info provided by the print API. The way its currently coded, the [H:C:T] print in sdev_printk will be inbetween "mptbase" and "iocX", instead of before. Signed-off-by:
-
Eric Moore authored
ScsiLookup is an array of pending scmd pointers that the scsi lld maintains. This array is touched from queuecommand, eh threads, and interrupt context. This array should put under locks, hence this patch to synchronize its access. I've added some nice little function wrappers for this, and moved the ScsiLookup array over to MPT_ADAPTER struct. Signed-off-by:
-
Eric Moore authored
List below is output from C=2 sparse compilation, which are fixed with this patch. 1) mptspi: pg0 is defined in x86 version of include/asm/pgtable.h 2) mptsas: context imbalance in 'mptsas_probe' different lock contexts for basic block 3) mptbase: from mpt_attach - cast adds address space to expression 4) mptbase: from mpt_do_upload - request[] is bad constant expression Signed-off-by:
-
Eric Moore authored
The driver is currently typecasting to obtain the shost hostdata. The driver is updated to use the shost_priv macro. Signed-off-by:
-
Matthew Wilcox authored
All these drivers meant to call ->scsi_done() but got confused. Signed-off-by:
-
Matthew Wilcox authored
We can simply call the internal done function directly Signed-off-by:
-
James Bottomley authored
Because scsi_print_sense_hdr prefixes with KERN_INFO, the output from scsi_io_completion looks like: sd 0:0:0:0: [sdb] Device not ready: <6>: Sense Key : 0x2 [current] : ASC=0x4 ASCQ=0x3 By using scsi_show_sense_hdr, we can get the much more appealing output: sd 0:0:0:0: [sdb] Device not ready: Sense Key : 0x2 [current] sd 0:0:0:0: [sdb] Device not ready: ASC=0x4 ASCQ=0x3 Acked-by:
-
Matthew Wilcox authored
The pid field is a duplicate of the serial_number field and has been scheduled for removal for a long time. A few drivers were still using it, so just change them to use serial_number instead. Signed-off-by:
-
Kay Sievers authored
Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
Bernhard Walle authored
This patch just makes the version number in ips.c and ips.h consistent. It seems that this has been forgotten in a60768e2. It also removes code duplication, each number is now only once in the code to avoid similar errors in the future. Signed-off-by:
Bernhard Walle <bwalle@suse.de> Acked-by:
Mark Salyzyn <aacraid@adaptec.com> Signed-off-by:
-
Matthew Wilcox authored
We were releasing the IRQ before removing the host, so commands could still be coming in which would never be seen by the interrupt handler. Just remove the host before releasing the IRQ to close this race. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Matthew Wilcox authored
If an error occurred during initialisation, we would sometimes fail to call scsi_host_put() and thus end up with a leaked scsi_host. It was also possible to miss calling scsi_remove_host(). Signed-off-by:
-
Matthew Wilcox authored
If scsi_add_host returned an error, the host would never be freed. We need to call scsi_host_put() if an error happens. Signed-off-by:
-
Matthew Wilcox authored
We were releasing the IRQ before removing the host, so commands could still be coming in which would never be seen by the interrupt handler. Just remove the host before releasing the IRQ to close this race. Signed-off-by:
-
Matthew Wilcox authored
We were releasing the IRQ before removing the host, so commands could still be coming in which would never be seen by the interrupt handler. Just remove the host before releasing the IRQ to close this race. Signed-off-by:
-
Matthew Wilcox authored
Since ncr53c8xx_attach() calls scsi_host_put(), make ncr53c8xx_release() call scsi_host_put() too, for symmetry. Both callers already expect it to put the host for them, so that works out nicely. While the zalon driver does 'use' the host pointer afterwards, it only compares it for equality and doesn't dereference it, so that's safe. While I'm at it, get rid of pointless checks for NULL, use shost_priv() and change ncr53c8xx_release to return void. Signed-off-by:
-
Matthew Wilcox authored
We were releasing the block devices before removing the host, so commands could still be coming in which would cause a panic. Just remove the host before releasing the block devices to close this race. Signed-off-by:
-
Matthew Wilcox authored
There was a missing call to scsi_host_put() causing us to leak a scsi host every time this module was unloaded. Signed-off-by:
-
Matthew Wilcox authored
If kthread_run failed, we would fail to scan the host, and leak the allocated async_scan_data. Since using a separate thread is just an optimisation, do the scan synchronously if we fail to spawn a thread. Signed-off-by:
-
Matthew Wilcox authored
The current code prints: scsi 13:0:4:0: scsi: Device offlined - not ready after error recovery which is repetitively redundant. This patch changes that message to: scsi 6:0:6:0: Device offlined - not ready after error recovery Signed-off-by:
-
James Bottomley authored
sg uses a scheme to reallocate a single contiguous array of all its pointers for lookup and management. This didn't matter too much when sg could only attach 256 nodes, but now the maximum has been bumped up to 32k we're starting to push the limits of the maximum allocatable contiguous memory. The solution to this is to eliminate the static array and do everything via idr, which this patch does. Acked-by:
Douglas Gilbert <dougg@torque.net> Signed-off-by:
-
Matthias Kaehlcke authored
The OnStream SCSI Tape driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by:
Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Willem Riede <wrlk@riede.org> Signed-off-by:
-
Jeff Garzik authored
* Remove IRQF_DISABLED, it is clearly wrong for this driver. * Remove wasteful spin_lock_irqsave() in interrupt handler. The lighter-weight spin_lock() is all that's needed. * Annotate with FIXME where arcmsr_interrupt() is called without any spinlock being acquired. * Eliminate pointless cast from void pointer in arcmsr_do_interrupt() [jejb: conflict resolution] Signed-off-by:
Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by:
-
Jeff Garzik authored
Remove _interruptible, since receiving a signal while waiting on a hardware condition will simply cause the driver to busy-wait. Using msleep_interruptible() is rarely the right thing to do, when waiting on a hardware condition to change. Also, replace msleep with ssleep while doing this, where appropriate. [jejb: fix up merge conflict] Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Do not adjust the iIDMA speed on ports which have a faster link-speed than the HBA itself. Signed-off-by:
-
Andrew Vasquez authored
Since MSI-X vectors do not require a clearing "handshake" from the system perspective, and the registered handler will not be called more than once for one occurrence of receipt of a vector, there is no requirement to flush the risc register write clearing the interrupt condition in the risc. Also, since the msi-x registered handlers are optimised for a particular vector, it is preferable to handle the one vector received per invocation of the handler. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Make several needlessly global functions static: - qla2x00_mark_vp_devices_dead() - qla24xx_configure_vp() Remove unused function qla24xx_modify_vport(). Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Drop usage of legacy to_qla_host() macro. Signed-off-by:
-
Andrew Vasquez authored
This change reduces by as much as 16% the memory footprint for each allocated sbr_t structure requested from the mempool. Signed-off-by:
-
Seokmann Ju authored
Signed-off-by:
-
