Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

dentry->d_sb is just as good as parent->d_sb
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Use ->d_sb directly.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The only place where we feed to __d_rehash() something other than
d_hash(dentry->d_name.hash) is __d_move(), where we give it d_hash
of another dentry.  Postpone rehashing until we'd switched the
names and we are rid of that exception, along with the need to
keep _d_rehash() and __d_rehash() separate.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull IDE updates from David Miller:
 "Just a couple small bug fixes, nothing overly exciting in here"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: missing break statement in set_timings_mdma()
  ide: hpt366: fix incorrect mask when checking at cmd_high_time
  ide-tape: fix misprint in failure handling in idetape_init()
  cmd640: add __init attribute

Pull sparc updates from David Miller:

 1) Double spin lock bug in sunhv serial driver, from Dan Carpenter.

 2) Use correct RSS estimate when determining whether to grow the huge
    TSB or not, from Mike Kravetz.

 3) Don't use full three level page tables for hugepages, PMD level is
    sufficient.  From Nitin Gupta.

 4) Mask out extraneous bits from TSB_TAG_ACCESS register, we only want
    the address bits.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Trim page tables for 8M hugepages
  sparc64 mm: Fix base TSB sizing when hugetlb pages are used
  sparc: serial: sunhv: fix a double lock bug
  sparc32: off by ones in BUG_ON()
  sparc: Don't leak context bits into thread->fault_address

Pull ARC updates from Vineet Gupta:
 "Things have been calm here - nothing much except for a few fixes"

* tag 'arc-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: mm: don't loose PTE_SPECIAL in pte_modify()
  ARC: dma: fix address translation in arc_dma_free
  ARC: typo fix in mm/ioremap.c
  ARC: fix linux-next build breakage

Pull AVR32 updates from Hans-Christian Noren Egtvedt.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  avr32: off by one in at32_init_pio()
  avr32: fixup code style in unistd.h and syscall_table.S
  avr32: wire up preadv2 and pwritev2 syscalls

Pull ARM updates from Russell King:
 "Included in this update are:

   - Patches from Gregory Clement to fix the coherent DMA cases in our
     dma-mapping code.

   - A number of CPU errata updates and fixes.

   - ARM cpuidle improvements from Jisheng Zhang.

   - Fix from Kees for the location of _etext.

   - Cleanups from Masahiro Yamada to avoid duplicated messages during
     the kernel build, and remove CONFIG_ARCH_HAS_BARRIERS.

   - Remove a udelay loop limitation, allowing for faster CPUs to
     calibrate the delay correctly.

   - Cleanup some left-overs from the SW PAN implementation.

   - Ensure that a modified address limit is not visible to exception
     handlers"

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (21 commits)
  ARM: 8586/1: cpuidle: make arm_cpuidle_suspend() a bit more efficient
  ARM: 8585/1: cpuidle: fix !cpuidle_ops[cpu].init case during init
  ARM: 8561/4: dma-mapping: Fix the coherent case when iommu is used
  ARM: 8561/3: dma-mapping: Don't use outer_flush_range when the L2C is coherent
  ARM: 8560/1: errata: Workaround errata A12 825619 / A17 852421
  ARM: 8559/1: errata: Workaround erratum A12 821420
  ARM: 8558/1: errata: Workaround errata A12 818325/852422 A17 852423
  ARM: save and reset the address limit when entering an exception
  ARM: 8577/1: Fix Cortex-A15 798181 errata initialization
  ARM: 8584/1: floppy: avoid gcc-6 warning
  ARM: 8583/1: mm: fix location of _etext
  ARM: 8582/1: remove unused CONFIG_ARCH_HAS_BARRIERS
  ARM: 8306/1: loop_udelay: remove bogomips value limitation
  ARM: 8581/1: add missing <asm/prom.h> to arch/arm/kernel/devtree.c
  ARM: 8576/1: avoid duplicating "Kernel: arch/arm/boot/*Image is ready"
  ARM: 8556/1: on a generic DT system: do not touch l2x0
  ARM: uaccess: remove put_user() code duplication
  ARM: 8580/1: Remove orphaned __addr_ok() definition
  ARM: get rid of horrible *(unsigned int *)(regs + 1)
  ARM: introduce svc_pt_regs structure
  ...

Pull fuse updates from Miklos Szeredi:
 "This fixes error propagation from writeback to fsync/close for
  writeback cache mode as well as adding a missing capability flag to
  the INIT message.  The rest are cleanups.

  (The commits are recent but all the code actually sat in -next for a
  while now.  The recommits are due to conflict avoidance and the
  addition of Cc: stable@...)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: use filemap_check_errors()
  mm: export filemap_check_errors() to modules
  fuse: fix wrong assignment of ->flags in fuse_send_init()
  fuse: fuse_flush must check mapping->flags for errors
  fuse: fsync() did not return IO errors
  fuse: don't mess with blocking signals
  new helper: wait_event_killable_exclusive()
  fuse: improve aio directIO write performance for size extending writes

This reverts commit 3c9fe8cd.

As Miklos points out in commit c1b2cc1a, the "lookup_hash()" helper
is now unused, and in fact, with the hash salting changes, since the
hash of a dentry name now depends on the directory dentry it is in, the
helper function isn't even really likely to be useful.

So rather than keep it around in case somebody else might end up finding
a use for it, let's just remove the helper and not trick people into
thinking it might be a useful thing.

For example, I had obviously completely missed how the helper didn't
follow the normal dentry hashing patterns, and how the hash salting
patch broke overlayfs.  Things would quietly build and look sane, but
not work.
Suggested-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull overlayfs update from Miklos Szeredi:
 "First of all, this fixes a regression in overlayfs introduced by the
  dentry hash salting.  I've moved the patch fixing this to the front of
  the queue, so if (god forbid) something needs to be bisected in
  overlayfs this regression won't interfere with that.

  The biggest part is preparation for selinux support, done by Vivek
  Goyal.  Essentially this makes all operations on underlying
  filesystems be done with credentials of mounter.  This makes
  everything nicely consistent.

  There are also fixes for a number of known and recently discovered
  non-standard behavior (thanks to Eryu Guan for testing and improving
  the test suites)"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (23 commits)
  ovl: simplify empty checking
  qstr: constify instances in overlayfs
  ovl: clear nlink on rmdir
  ovl: disallow overlayfs as upperdir
  ovl: fix warning
  ovl: remove duplicated include from super.c
  ovl: append MAY_READ when diluting write checks
  ovl: dilute permission checks on lower only if not special file
  ovl: fix POSIX ACL setting
  ovl: share inode for hard link
  ovl: store real inode pointer in ->i_private
  ovl: permission: return ECHILD instead of ENOENT
  ovl: update atime on upper
  ovl: fix sgid on directory
  ovl: simplify permission checking
  ovl: do not require mounter to have MAY_WRITE on lower
  ovl: do operations on underlying file system in mounter's context
  ovl: modify ovl_permission() to do checks on two inodes
  ovl: define ->get_acl() for overlay inodes
  ovl: move some common code in a function
  ...

Pull freevxfs updates from Christoph Hellwig:
 "Support for foreign endianess and HP-UP superblocks from
  Krzysztof Błaszkowski"

* tag 'freevxfs-for-4.8' of git://git.infradead.org/users/hch/freevxfs:
  freevxfs: update Kconfig information
  freevxfs: refactor readdir and lookup code
  freevxfs: fix lack of inode initialization
  freevxfs: fix memory leak in vxfs_read_fshead()
  freevxfs: update documentation and cresdits for HP-UX support
  freevxfs: implement ->alloc_inode and ->destroy_inode
  freevxfs: avoid the need for forward declaring the super operations
  freevxfs: move VFS inode allocation into vxfs_blkiget and vxfs_stiget
  freevxfs: remove vxfs_put_fake_inode
  freevxfs: handle big endian HP-UX file systems

Pull configfs update from Christoph Hellwig:
 "A simple error handling fix from Tal Shorer"

* tag 'configfs-for-4.8' of git://git.infradead.org/users/hch/configfs:
  configfs: don't set buffer_needs_fill to zero if show() returns error

Pull CIFS/SMB3 fixes from Steve French:
 "Various CIFS/SMB3 fixes, most for stable"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix a possible invalid memory access in smb2_query_symlink()
  fs/cifs: make share unaccessible at root level mountable
  cifs: fix crash due to race in hmac(md5) handling
  cifs: unbreak TCP session reuse
  cifs: Check for existing directory when opening file with O_CREAT
  Add MF-Symlinks support for SMB 2.0

For PMD aligned (8M) hugepages, we currently allocate
all four page table levels which is wasteful. We now
allocate till PMD level only which saves memory usage
from page tables.

Also, when freeing page table for 8M hugepage backed region,
make sure we don't try to access non-existent PTE level.

Orabug: 22630259
Signed-off-by: Nitin Gupta <nitin.m.gupta@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Can be used by fuse, btrfs and f2fs to replace opencoded variants.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

FUSE_HAS_IOCTL_DIR should be assigned to ->flags, it may be a typo.
Signed-off-by: Wei Fang <fangwei1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 69fe05c9 ("fuse: add missing INIT flags")
Cc: <stable@vger.kernel.org>

fuse_flush() calls write_inode_now() that triggers writeback, but actual
writeback will happen later, on fuse_sync_writes(). If an error happens,
fuse_writepage_end() will set error bit in mapping->flags. So, we have to
check mapping->flags after fuse_sync_writes().
Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 4d99ff8f ("fuse: Turn writeback cache on")
Cc: <stable@vger.kernel.org> # v3.15+

Due to implementation of fuse writeback filemap_write_and_wait_range() does
not catch errors. We have to do this directly after fuse_sync_writes()
Signed-off-by: Alexey Kuznetsov <kuznet@virtuozzo.com>
Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 4d99ff8f ("fuse: Turn writeback cache on")
Cc: <stable@vger.kernel.org> # v3.15+

The empty checking logic is duplicated in ovl_check_empty_and_clear() and
ovl_remove_and_whiteout(), except the condition for clearing whiteouts is
different:

ovl_check_empty_and_clear() checked for being upper

ovl_remove_and_whiteout() checked for merge OR lower

Move the intersection of those checks (upper AND merge) into
ovl_check_empty_and_clear() and simplify ovl_remove_and_whiteout().
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

To make delete notification work on fa/inotify.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

This does not work and does not make sense.  So instead of fixing it
(probably not hard) just disallow.
Reported-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>

There's a superfluous newline in the warning message in ovl_d_real().
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Remove duplicated include.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Right now we remove MAY_WRITE/MAY_APPEND bits from mask if realfile is on
lower/. This is done as files on lower will never be written and will be
copied up. But to copy up a file, mounter should have MAY_READ permission
otherwise copy up will fail. So set MAY_READ in mask when MAY_WRITE is
reset.

Dan Walsh noticed this when he did access(lowerfile, W_OK) and it returned
True (context mounts) but when he tried to actually write to file, it
failed as mounter did not have permission on lower file.

[SzM] don't set MAY_READ if only MAY_APPEND is set without MAY_WRITE; this
won't trigger a copy-up.
Reported-by: Dan Walsh <dwalsh@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Right now if file is on lower/, we remove MAY_WRITE/MAY_APPEND bits from
mask as lower/ will never be written and file will be copied up. But this
is not true for special files. These files are not copied up and are opened
in place. So don't dilute the checks for these types of files.
Reported-by: Dan Walsh <dwalsh@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Setting POSIX ACL needs special handling:

1) Some permission checks are done by ->setxattr() which now uses mounter's
creds ("ovl: do operations on underlying file system in mounter's
context").  These permission checks need to be done with current cred as
well.

2) Setting ACL can fail for various reasons.  We do not need to copy up in
these cases.

In the mean time switch to using generic_setxattr.

[Arnd Bergmann] Fix link error without POSIX ACL. posix_acl_from_xattr()
doesn't have a 'static inline' implementation when CONFIG_FS_POSIX_ACL is
disabled, and I could not come up with an obvious way to do it.

This instead avoids the link error by defining two sets of ACL operations
and letting the compiler drop one of the two at compile time depending
on CONFIG_FS_POSIX_ACL. This avoids all references to the ACL code,
also leading to smaller code.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Inode attributes are copied up to overlay inode (uid, gid, mode, atime,
mtime, ctime) so generic code using these fields works correcty.  If a hard
link is created in overlayfs separate inodes are allocated for each link.
If chmod/chown/etc. is performed on one of the links then the inode
belonging to the other ones won't be updated.

This patch attempts to fix this by sharing inodes for hard links.

Use inode hash (with real inode pointer as a key) to make sure overlay
inodes are shared for hard links on upper.  Hard links on lower are still
split (which is not user observable until the copy-up happens, see
Documentation/filesystems/overlayfs.txt under "Non-standard behavior").

The inode is only inserted in the hash if it is non-directoy and upper.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

To get from overlay inode to real inode we currently use 'struct
ovl_entry', which has lifetime connected to overlay dentry.  This is okay,
since each overlay dentry had a new overlay inode allocated.

Following patch will break that assumption, so need to leave out ovl_entry.
This patch stores the real inode directly in i_private, with the lowest bit
used to indicate whether the inode is upper or lower.

Lifetime rules remain, using ovl_inode_real() must only be done while
caller holds ref on overlay dentry (and hence on real dentry), or within
RCU protected regions.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

The error is due to RCU and is temporary.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Fix atime update logic in overlayfs.

This patch adds an i_op->update_time() handler to overlayfs inodes.  This
forwards atime updates to the upper layer only.  No atime updates are done
on lower layers.

Remove implicit atime updates to underlying files and directories with
O_NOATIME.  Remove explicit atime update in ovl_readlink().

Clear atime related mnt flags from cloned upper mount.  This means atime
updates are controlled purely by overlayfs mount options.

Reported-by: Konstantin Khlebnikov <koct9i@gmail.com> 
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

When creating directory in workdir, the group/sgid inheritance from the
parent dir was omitted completely.  Fix this by calling inode_init_owner()
on overlay inode and using the resulting uid/gid/mode to create the file.

Unfortunately the sgid bit can be stripped off due to umask, so need to
reset the mode in this case in workdir before moving the directory in
place.
Reported-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

The fact that we always do permission checking on the overlay inode and
clear MAY_WRITE for checking access to the lower inode allows cruft to be
removed from ovl_permission().

1) "default_permissions" option effectively did generic_permission() on the
overlay inode with i_mode, i_uid and i_gid updated from underlying
filesystem.  This is what we do by default now.  It did the update using
vfs_getattr() but that's only needed if the underlying filesystem can
change (which is not allowed).  We may later introduce a "paranoia_mode"
that verifies that mode/uid/gid are not changed.

2) splitting out the IS_RDONLY() check from inode_permission() also becomes
unnecessary once we remove the MAY_WRITE from the lower inode check.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Now we have two levels of checks in ovl_permission(). overlay inode
is checked with the creds of task while underlying inode is checked
with the creds of mounter.

Looks like mounter does not have to have WRITE access to files on lower/.
So remove the MAY_WRITE from access mask for checks on underlying
lower inode.

This means task should still have the MAY_WRITE permission on lower
inode and mounter is not required to have MAY_WRITE.

It also solves the problem of read only NFS mounts being used as lower.
If __inode_permission(lower_inode, MAY_WRITE) is called on read only
NFS, it fails. By resetting MAY_WRITE, check succeeds and case of
read only NFS shold work with overlay without having to specify any
special mount options (default permission).
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Given we are now doing checks both on overlay inode as well underlying
inode, we should be able to do checks and operations on underlying file
system using mounter's context.

So modify all operations to do checks/operations on underlying dentry/inode
in the context of mounter.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Right now ovl_permission() calls __inode_permission(realinode), to do
permission checks on real inode and no checks are done on overlay inode.

Modify it to do checks both on overlay inode as well as underlying inode.
Checks on overlay inode will be done with the creds of calling task while
checks on underlying inode will be done with the creds of mounter.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>