- 21 Nov, 2017 2 commits
-
-
Daniel Vetter authored
Bake in the conflict between the drm_print.h extraction and the addition of DRM_DEBUG_LEASES since we lost it a few too many times. Also fix a new use of drm_plane_helper_check_state in msm to follow Ville's conversion in commit a01cb8ba Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Nov 1 22:16:19 2017 +0200 drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c Acked-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Arvind Yadav authored
platform_get_irq_byname() can fail here and we must check its return value. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/f4b4f1b2cfa5e302ef7ffad4e3efb0d3147709d3.1510914877.git.arvind.yadav.cs@gmail.com
-
- 20 Nov, 2017 10 commits
-
-
Dave Stevenson authored
NV12 (YUV420 2 plane) and NV16 (YUV422 2 plane) were supported, but NV21 and NV61 (same but with Cb and Cr swapped) weren't. Add them. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
-
Dave Stevenson authored
The hardware has enums for altering the Cr and Cb order, so use this instead of having a flag which swaps the order the pointers are presented to the hardware (that only worked for 3 plane formats anyway). Explicitly sets .pixel_order in each case, rather than relying on then default XYCBCR order being a value 0. Signed-off-by:
-
Dave Stevenson authored
Filling out the list of supported formats based on those the hardware can support. Signed-off-by:
-
Ville Syrjälä authored
drm_plane_helper_check_update() isn't a transitional helper, so let's rename it to drm_atomic_helper_check_plane_state() and move it into drm_atomic_helper.c. v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc Cc: Daniel Vetter <daniel@ffwll.ch> Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Ville Syrjälä authored
drm_plane_helper_check_state() is supposed to do things the atomic way, so it should not be inspecting crtc->enabled. Rather we should be looking at crtc_state->enable. We have a slight complication due to drm_plane_helper_check_update() reusing drm_plane_helper_check_state() for non-atomic drivers. Thus we'll have to pass the crtc_state in manally and construct a fake crtc_state in drm_plane_helper_check_update(). v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc Signed-off-by:
-
Ville Syrjälä authored
Try to fix the code to actually clip the plane to the crtc bounds instead of the user provided crtc coordinates (which would be a no-op since those are exactly the coordinates before clipping). Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
Sinclair Yeh <syeh@vmware.com>
-
Ville Syrjälä authored
Atomic drivers have no reason to use drm_plane_helper_check_update() instead of drm_plane_helper_check_state(). So let's switch over. Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Ville Syrjälä authored
Throw away the bugs crtc coords vs. fb size check. Crtc coords don't define the viewport inside the fb, that's a job for the src coords, which have been checked by the core already. Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Greg Kroah-Hartman authored
There is no need to #define the license of the driver, just put it in the MODULE_LICENSE() line directly as a text string. This allows tools that check that the module license matches the source code license to work properly, as there is no need to unwind the unneeded dereference, especially when the string is defined in a .h file far away from the .c file it is used in. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Reported-by:
Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Lucas Stach authored
The i2c adapter on DP AUX is purely a software construct. Linking it to the device node of the parent device is wrong, as it leads to 2 devices sharing the same device node, which is bad practice, as well as the i2c trying to populate children of the i2c adapter by looking at the child device nodes of the parent device. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170113173630.22138-1-l.stach@pengutronix.de
-
- 17 Nov, 2017 2 commits
-
-
Lukasz Majewski authored
The Mitsubishi AA070MC01 is a 7.0" WVGA (800x480) TFT panel working in 8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector). Signed-off-by:
Lukasz Majewski <lukma@denx.de> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Lukasz Majewski authored
The Tianma TM070RVHG71 is a 7" WVGA (800x480) TFT LCD panel connected via LVDS and can be supported by the simple-panel binding. Signed-off-by:
-
- 16 Nov, 2017 4 commits
-
-
Maciej Purski authored
If the sink device is in HDMI mode, enable infoframe interrupt in scdt irq handle function else call start_video function immediately, because in DVI mode, there is no infoframe interrupt provided. Rename start_hdmi function to start_video and get rid of the old start_video function. In start_video, if the sink is DVI and mode is MHL1 or MHl2, write appropriate values to registers else the path should remain the same as in HDMI mode. Signed-off-by:
Maciej Purski <m.purski@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
The maximum pixel clock depends on the version of the connected MHL adapter. Add mode_valid callback to filter out modes with too high pixel clock to avoid failure in mode_fixup later. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Sandy Huang authored
RK3126 vop register layout is similar with rk3036, so some feature can reuse with rk3036. RK3126 support two overlay plane and one hwc plane, max output resolution is 1080p. it support IOMMU, and its IOMMU same as rk3288's Signed-off-by:
Sandy Huang <hjc@rock-chips.com> Reviewed-by:
Mark Yao <mark.yao@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510658857-90299-1-git-send-email-hjc@rock-chips.com
-
Sandy Huang authored
Signed-off-by:
-
- 15 Nov, 2017 2 commits
-
-
Liviu Dudau authored
drm_gem_cma_prime_import_sg_table() will fail if the number of entries in the sg_table > 1. However, you can have a device that uses an IOMMU engine and can map a discontiguous buffer with multiple entries that have consecutive sg_dma_addresses, effectively making it contiguous. Allow for that scenario by testing the entries in the sg_table for contiguous coverage. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171110133310.1225-1-Liviu.Dudau@arm.com
-
Daniel Vetter authored
It's useful for syncing async connector work like link retraining. v2: Make it work (Manasi&Ville) Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
- 14 Nov, 2017 7 commits
-
-
Ville Syrjälä authored
Add the missing kerneldoc for modifiers and modifier_count. Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Suggested-by:
Alex Deucher <alexander.deucher@amd.com>
-
Ville Syrjälä authored
Use the correct name for the function argument in the docs. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Ville Syrjälä authored
The member is called 'modifiers_property' instead of 'modifiers'. Adjust the kernel docs to match. Cc: dri-devel@lists.freedesktop.org Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by:
-
Christian König authored
The amdgpu issue to also need signaled fences in the reservation objects should be fixed by now. Optimize the handling by replacing a signaled fence when adding a new shared one. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Christian König authored
The amdgpu issue to also need signaled fences in the reservation objects should be fixed by now. Optimize the list by keeping only the not signaled yet fences around. v2: temporary put the signaled fences at the end of the new container v3: put the old fence at the end of the new container as well. Signed-off-by:
-
Noralf Trønnes authored
The introduction of: drm/framebuffer: Add framebuffer debugfs file broke vgem. That patch assumed that all drivers had initialized the dev->mode_config.fb_lock mutex which happens in drm_mode_config_init(). vgem doesn't need to call drm_mode_config_init(). Fix this by only creating the framebuffer debugfs file for modesetting drivers. Fixes: 45d58b40 ("drm/framebuffer: Add framebuffer debugfs file") Suggested-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171113231201.26177-1-noralf@tronnes.org
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next - Improved HDMI and Mixer drivers . It moves mode setup and plane update code to commit like other CRTC drivers . It makes mode commit to be called in enable callback only one time . some cleanup and fixup to HDMI and Mixer drivers. . It adds 1024x768, 1280x1024 and 1366x768 modes support - Added HDMI audio interface driver . As of now, HDMI audio worked on boards with external audio codec connected in parallel with the HDMI audio transmitter's I2S interface. This patch is required to support HDMI audio properly. * tag 'exynos-drm-next-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm: exynos: Add driver for HDMI audio interface drm/exynos/hdmi: add 85.5MHz pixel clock for v14 HDMI PHY drm/exynos/mixer: enable support for 1024x768 and 1280x1024 modes drm/exynos/hdmi: quirk for support mode timings conversion drm/exynos/mixer: pass actual mode on MIXER to encoder drm/exynos: add mode_fixup callback to exynos_drm_crtc_ops drm/exynos/hdmi: remove redundant mode field drm/exynos/mixer: remove mixer_resources sub-structure drm/exynos/mixer: fix mode validation code drm/exynos/mixer: move resolution configuration to single function drm/exynos/mixer: move mode commit to enable callback drm/exynos/mixer: abstract out output mode setup code
-
- 13 Nov, 2017 6 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
This is a shared tree between drm and audio for some amd bits. * 'linus-4.14-rc4-acp-prereq' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu Moving amdgpu asic types to a separate file ASoC: AMD: Added asic_type as ACP DMA driver platform data drm/amd/amdgpu: Added asic_type as ACP DMA driver platform data
-
Christian König authored
That's the only wrapper function missing and necessary to cleanup TTM. Reviewed-and-Tested-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Driver Changes: - qxl: Use a shadow bo as primary and blit to it to fix flicker (Gerd) - rockchip: Convert psr spinlock to mutex (Emil) Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Gerd Hoffmann <kraxel@redhat.com> * tag 'drm-misc-fixes-2017-11-13' of git://anongit.freedesktop.org/drm/drm-misc: drm/rockchip: analogix_dp: Use mutex rather than spinlock
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2017-11-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 fixes for v4.15 * tag 'drm-intel-next-fixes-2017-11-10' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU drm/i915: Move init_clock_gating() back to where it was drm/i915: Prune the reservation shared fence array drm/i915: Idle the GPU before shinking everything drm/i915: Lock llist_del_first() vs llist_del_all() drm/i915: Calculate ironlake intermediate watermarks correctly, v2. drm/i915: Disable lazy PPGTT page table optimization for vGPU drm/i915/execlists: Remove the priority "optimisation" drm/i915: Filter out spurious execlists context-switch interrupts
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Driver Changes: - qxl: Use a shadow bo as primary and blit to it to fix flicker (Gerd) * tag 'drm-misc-fixes-2017-11-02' of git://anongit.freedesktop.org/drm/drm-misc: qxl: alloc & use shadow for dumb buffers drm/qxl: replace QXL_INFO with DRM_DEBUG_DRIVER
-
Emil Renner Berthing authored
On the Samsung Chromebook Plus I get this error with 4.14-rc3: BUG: scheduling while atomic: kworker/3:1/50/0x00000002 Modules linked in: CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 4.14.0-0.rc3-kevin #2 Hardware name: Google Kevin (DT) Workqueue: events analogix_dp_psr_work Call trace: [<ffffff80080873b0>] dump_backtrace+0x0/0x320 [<ffffff80080876e4>] show_stack+0x14/0x20 [<ffffff8008606d38>] dump_stack+0x9c/0xbc [<ffffff80080c6b5c>] __schedule_bug+0x4c/0x70 [<ffffff80086188c0>] __schedule+0x3f0/0x458 [<ffffff8008618960>] schedule+0x38/0xa0 [<ffffff800861c20c>] schedule_hrtimeout_range_clock+0x84/0xe8 [<ffffff800861c2a0>] schedule_hrtimeout_range+0x10/0x18 [<ffffff800861bcec>] usleep_range+0x64/0x78 [<ffffff8008415a6c>] analogix_dp_transfer+0x16c/0x340 [<ffffff8008412550>] analogix_dpaux_transfer+0x10/0x18 [<ffffff80083ceb14>] drm_dp_dpcd_access+0x4c/0xf0 [<ffffff80083cf614>] drm_dp_dpcd_write+0x1c/0x28 [<ffffff8008413b98>] analogix_dp_disable_psr+0x60/0xa8 [<ffffff800840da3c>] analogix_dp_psr_work+0x4c/0x90 [<ffffff80080bb09c>] process_one_work+0x1d4/0x348 [<ffffff80080bb258>] worker_thread+0x48/0x478 [<ffffff80080c11fc>] kthread+0x12c/0x130 [<ffffff8008084290>] ret_from_fork+0x10/0x18 Changing rockchip_dp_device::psr_lock to a mutex rather than spinlock seems to fix the issue. Signed-off-by:
Emil Renner Berthing <kernel@esmil.dk> Tested-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
-
- 11 Nov, 2017 7 commits
-
-
Noralf Trønnes authored
drm_fb_cma_debugfs_show() and drm_gem_cma_describe() are superseded by drm_framebuffer_debugfs_init() and drm_gem_cma_print_info(). Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Noralf Trønnes authored
There is a new core debugfs file that prints fb/gem info: <debugfs>/dri/<n>/framebuffer Use drm_gem_cma_print_info() to provide info to that output instead of using drm_fb_cma_debugfs_show(). Reviewed-by:
-
Noralf Trønnes authored
There is a new core debugfs file that prints fb/gem info: <debugfs>/dri/<n>/framebuffer Use drm_gem_cma_print_info() to provide info to that output instead of using drm_fb_cma_debugfs_show(). Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Jyri Sarha <jsarha@ti.com> Reviewed-by:
-
Noralf Trønnes authored
There is a new core debugfs file that prints fb/gem info: <debugfs>/dri/<n>/framebuffer Use drm_gem_cma_print_info() to provide info to that output instead of using drm_fb_cma_debugfs_show(). Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by:
-
Noralf Trønnes authored
There is a new core debugfs file that prints fb/gem info: <debugfs>/dri/<n>/framebuffer Use drm_gem_cma_print_info() to provide info to that output instead of using drm_fb_cma_debugfs_show(). Cc: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-9-noralf@tronnes.org
-
Noralf Trønnes authored
Add drm_gem_cma_print_info() for debugfs printing struct drm_gem_cma_object specific info. Reviewed-by:
-
Noralf Trønnes authored
This allows the argument to be a const. The other option was to keep it an inline function and make the argument a const: static inline struct drm_gem_cma_object * to_drm_gem_cma_obj(const struct drm_gem_object *gem_obj) { return container_of(gem_obj, struct drm_gem_cma_object, base); } This will happily return a non-const pointer to the drm_gem_cma_object based on a const pointer to the contained drm_gem_object, thus creating const-safety problems. There was an attempt to fix the problem in the container_of() macro itself (see https://lkml.org/lkml/2017/5/19/381) but the patch seems to have fallen through the cracks. It would require turning this inline function into a macro. By making this a macro now, we will benefit from a possible future enhancement of container_of(). We don't loose type checking by doing this, container_of() takes care of that. Suggested-by:
-
