- 13 Aug, 2019 15 commits
-
-
https://github.com/intel/gvt-linuxRodrigo Vivi authored
gvt-next-2019-08-13 - Enhance command parser for extra length check (Fred) - remove debugfs function return check (Greg) - batch buffer end double check after shadow copy (Tina) - one typo fix (Zhenyu) - klocwork warning fix (Zhi) - use struct_size() helper (Gustavo) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190813100604.GG19140@zhen-hp.sh.intel.com
-
Chris Wilson authored
Stop assuming we only get called with irqs-on for disarming the breadcrumbs, and do a full save/restore spin_lock_irq. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190813132916.20382-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
If the backend wishes to defer the wakeref parking, make it responsible for unlocking the wakeref (i.e. bumping the counter). This allows it to time the unlock much more carefully in case it happens to needs the wakeref to be active during its deferral. For instance, during engine parking we may choose to emit an idle barrier (a request). To do so, we borrow the engine->kernel_context timeline and to ensure exclusive access we keep the engine->wakeref.count as 0. However, to submit that request to HW may require a intel_engine_pm_get() (e.g. to keep the submission tasklet alive) and before we allow that we have to rewake our wakeref to avoid a recursive deadlock. <4> [257.742916] IRQs not enabled as expected <4> [257.742930] WARNING: CPU: 0 PID: 0 at kernel/softirq.c:169 __local_bh_enable_ip+0xa9/0x100 <4> [257.742936] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 btusb btrtl btbcm btintel snd_hda_intel snd_intel_nhlt bluetooth snd_hda_codec coretemp snd_hwdep crct10dif_pclmul snd_hda_core crc32_pclmul ecdh_generic ecc ghash_clmulni_intel snd_pcm r8169 realtek lpc_ich prime_numbers i2c_hid <4> [257.742991] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G U W 5.3.0-rc3-g5d0a06cd532c-drmtip_340+ #1 <4> [257.742998] Hardware name: GIGABYTE GB-BXBT-1900/MZBAYAB-00, BIOS F6 02/17/2015 <4> [257.743008] RIP: 0010:__local_bh_enable_ip+0xa9/0x100 <4> [257.743017] Code: 37 5b 5d c3 8b 80 50 08 00 00 85 c0 75 a9 80 3d 0b be 25 01 00 75 a0 48 c7 c7 f3 0c 06 ac c6 05 fb bd 25 01 01 e8 77 84 ff ff <0f> 0b eb 89 48 89 ef e8 3b 41 06 00 eb 98 e8 e4 5c f4 ff 5b 5d c3 <4> [257.743025] RSP: 0018:ffffa78600003cb8 EFLAGS: 00010086 <4> [257.743035] RAX: 0000000000000000 RBX: 0000000000000200 RCX: 0000000000010302 <4> [257.743042] RDX: 0000000080010302 RSI: 0000000000000000 RDI: 00000000ffffffff <4> [257.743050] RBP: ffffffffc0494bb3 R08: 0000000000000000 R09: 0000000000000001 <4> [257.743058] R10: 0000000014c8f0e9 R11: 00000000fee2ff8e R12: ffffa23ba8c38008 <4> [257.743065] R13: ffffa23bacc579c0 R14: ffffa23bb7db0f60 R15: ffffa23b9cc8c430 <4> [257.743074] FS: 0000000000000000(0000) GS:ffffa23bbba00000(0000) knlGS:0000000000000000 <4> [257.743082] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [257.743089] CR2: 00007fe477b20778 CR3: 000000011f72a000 CR4: 00000000001006f0 <4> [257.743096] Call Trace: <4> [257.743104] <IRQ> <4> [257.743265] __i915_request_commit+0x240/0x5d0 [i915] <4> [257.743427] ? __i915_request_create+0x228/0x4c0 [i915] <4> [257.743584] __engine_park+0x64/0x250 [i915] <4> [257.743730] ____intel_wakeref_put_last+0x1c/0x70 [i915] <4> [257.743878] i915_sample+0x2ee/0x310 [i915] <4> [257.744030] ? i915_pmu_cpu_offline+0xb0/0xb0 [i915] <4> [257.744040] __hrtimer_run_queues+0x11e/0x4b0 <4> [257.744068] hrtimer_interrupt+0xea/0x250 <4> [257.744079] ? lockdep_hardirqs_off+0x79/0xd0 <4> [257.744101] smp_apic_timer_interrupt+0x96/0x280 <4> [257.744114] apic_timer_interrupt+0xf/0x20 <4> [257.744125] RIP: 0010:__do_softirq+0xb3/0x4ae v2: Keep the priority_hint assert v3: That assert was desperately trying to point out my bug. Sorry, little assert. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111378Signed-off-by:
-
José Roberto de Souza authored
In this case we want to apply the mask and then shift so the parentheses is needed. SPANK! SPANK! SPANK! Naughty programmer! Fixes: 9749a5b6 ("drm/i915/tgl: Fix the read of the DDI that transcoder is attached to") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812175405.14479-1-jose.souza@intel.com
-
Tina Zhang authored
Double check the end of the privilege buffer to make sure the size of the privilege buffer remains unchanged after copy. v4: - Refine the commit message. (Zhenyu) v3: - To get the right offset of the batch buffer end cmd. (Yan) v2: - Use lightweight way to audit batch buffer end. (Yan) Reviewed-by:
Yan Zhao <yan.y.zhao@intel.com> Signed-off-by:
Tina Zhang <tina.zhang@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
Gao, Fred authored
Add valid length check for the commands with variable length. v2: remove the macro definition. (Zhenyu) v3: refine the LRI command. (Zhenyu) Reviewed-by:
Gao, Fred <fred.gao@intel.com> Signed-off-by:
-
Gao, Fred authored
Add the constant valid length of MI command. v2: Add F_VAL_CONST flag. (Zhenyu Wang) Reviewed-by:
-
Gao, Fred authored
Add utility for valid command length check. v2: Add F_VAL_CONST flag to identify the value is const although LEN maybe variable. (Zhenyu) v3: unused code removal, flag rename/conflict. (Zhenyu) v4: redefine F_IP_ADVANCE_CUSTOM and move the check function to next patch. (Zhenyu) Reviewed-by: -
Zhi Wang authored
Factor out tlb and mocs register offset table to fix the issues reported by klocwork, #512 and #550. Mostly, the reason why the klocwork reports these problems is because there can be possbilities for platforms, which have more rings than the ring offset table, to take the dirty data from the stack as the register offset. It results to a random HW register offset writting in this scenairo when doing context switch between vGPUs. After the factoring, the ring offset table of TLB and MOCS should be per platform. v2: - Enable TLB register switch for GEN8. (Zhenyu) Reviewed-by:
Zhi Wang <zhi.a.wang@intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Because there is no need to check these functions, a number of local functions can be made to return void to simplify things as nothing can fail. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gvt-dev@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Zhenyu Wang authored
This fixes typo for VBLANK_TIMER_PERIOD. Reviewed-by:
Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by:
-
Michal Wajdeczko authored
We don't care about internal firmware status changes unless we are doing some real debugging. Note that our CI is not using DRM_I915_DEBUG_GUC config by default so use it. v2: protect against accidental overwrites (Chris) Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
Since execlists and the guc have diverged in their port tracking, we cannot simply reuse the execlists cancellation code as it leads to unbalanced reference counting. Use a local, simpler routine for the guc. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812203626.3948-1-chris@chris-wilson.co.uk
-
Daniele Ceraolo Spurio authored
The last user has been removed, so drop the functions. Signed-off-by:
-
Daniele Ceraolo Spurio authored
We rely on the tasklet to update the GT PM refcount, so we can't disable it even if we've processed all the requests for the engine because we might have detected the request completion before the interrupt arrived. Since on all platforms on which we plan to support guc submission we don't allow disabling the breadcrumb interrupts, we can further siplify the park/unpark flow by removing the interrupt pin/unpin. A BUG_ON has been added to catch changes to this flow that would require us to restore some kind of pinning. v2: split removal of engine_pin/unpin_breadcrumbs_irq to its own patch (chris) Signed-off-by:
-
- 12 Aug, 2019 14 commits
-
-
Chris Wilson authored
Remove the raw i915_active_request tracking in favour of the higher level i915_active tracking for the sole purpose of making the lockless transition easier in later patches. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812174804.26180-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
We were using the last_fence to track the last request that used this vma that might be interpreted by a fence register and forced ourselves to wait for this request before modifying any fence register that overlapped our vma. Due to requirement that we need to track any XY_BLT command, linear or tiled, this in effect meant that we have to track the vma for its active lifespan anyway, so we can forgo the explicit last_fence tracking and just use the whole vma->active. Another solution would be to pipeline the register updates, and would help resolve some long running stalls for gen3 (but only gen 2 and 3!) Signed-off-by:
-
Andi Shyti authored
i915_irq.c is large. It serves as the central dispatch and handler for all of our device interrupts. Lets break it up by pulling out the GT interrupt handlers. Based on a patch by Chris Wilson. Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Reviewed-by:
-
Andi Shyti authored
i915_irq.c is large. It serves as the central dispatch and handler for all of our device interrupts. Pull out the GT pm interrupt handling (leaving the central dispatch) so that we can encapsulate the logic a little better. Based on a patch by Chris Wilson. Signed-off-by:
-
Chris Wilson authored
Now that we can atomically acquire the engine wakeref, make use of it when check whether the RING registers are idle. Signed-off-by:
-
Chris Wilson authored
When testing whether we prevent suppressing preemption, it helps to avoid a time slice expiring prematurely. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111108Signed-off-by:
-
Chris Wilson authored
Since we allow ourselves to use non-process context during parking, we cannot allow ourselves to sleep and in particular cannot call del_timer_sync() -- but we can use a plain del_timer(). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111375Signed-off-by:
-
Michal Wajdeczko authored
Include 2019 in copyright years and start using SPDX tag. Signed-off-by:
-
Anshuman Gupta authored
The DDI-IO power wells (PWR_WELL_CTL_DDI) are backing the IO/PHY functionality, which doesn't need the PG3 power power well. Accordingly fixing up the list of PG3 power domains. Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Anshuman Gupta authored
The DDI-IO power wells (PWR_WELL_CTL_DDI) are backing the IO/PHY functionality, which doesn't need the PG3 power power well. Accordingly fixing up the list of PG3 power domains. v2: Removed "DDI E/F IO"power domain as well [Imre] Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Michal Wajdeczko authored
Since commit 6ca9a2be ("drm/i915: Unwind i915_gem_init() failure") we believed that we correctly handle all errors encountered during GuC initialization, including special one that indicates request to run driver with disabled GPU submission (-EIO). Unfortunately since commit 121981fa ("drm/i915/guc: Combine enable_guc_loading|submission modparams") we stopped using that error code to avoid unwanted fallback to execlist submission mode. In result any GuC initialization failure was treated as non-recoverable error leading to driver load abort, so we could not even read related GuC error log to investigate cause of the problem. For now always return -EIO on any uC hardware related failure. Signed-off-by:
-
Michal Wajdeczko authored
Our old messages were redundant or misleading (as loaded is not the same as running). Keep only one message for debug. Signed-off-by:
-
Michal Wajdeczko authored
After successful uC initialization we are reporting GuC firmware version and status of GuC submission and HuC. Add HuC fw version to this report to make it complete, but also skip all HuC info if HuC is not supported. v2: squeeze to one line (Chris) Signed-off-by:
-
Michal Wajdeczko authored
We don't want to rely on misleading WOPCM partitioning error. Signed-off-by:
-
- 11 Aug, 2019 1 commit
-
-
Chris Wilson authored
Before we start upon our great GT interrupt refactor, throw out the cruft! In this case, it is an unloved debugfs showing the current ips status, a fairly meaningless bunch of numbers that we are not checking. Signed-off-by:
-
- 10 Aug, 2019 7 commits
-
-
Matthew Auld authored
Simple buddy allocator. We want to allocate properly aligned power-of-two blocks to promote usage of huge-pages for the GTT, so 64K, 2M and possibly even 1G. While we do support allocating stuff at a specific offset, it is more intended for preallocating portions of the address space, say for an initial framebuffer, for other uses drm_mm is probably a much better fit. Anyway, hopefully this can all be thrown away if we eventually move to having the core MM manage device memory. Signed-off-by:
-
Matthew Auld authored
We can already clear an object with the blt, so try to do the same to support copying from one object backing store to another. Really this is just object -> object, which is not that useful yet, what we really want is two backing stores, but that will require some vma rework first, otherwise we are stuck with "tmp" objects. Signed-off-by:
-
Matthew Auld authored
We currently disable THP(Transparent-Huge-Pages) for our shmem objects due to a performance regression with read BW in some internal benchmarks. Given that this is our main source of 2M pages, there really isn't much point in enabling 2M GTT pages, especially as that comes at the cost of disabling the GTT cache. However from gen11 it looks like we should hopefully see the HW issue resolved. Given this opt for only enabling 2M GTT pages from gen11 onwards. Signed-off-by:
-
Matthew Auld authored
For some platforms the GTT cache is by default not enabled, and currently where we explicitly enable it, we make it conditional on 2M GTT page support, since the BSpec states that we must disable it if we enable 2M/1G pages. To make this more consistent opt for blanket enabling the GTT cache for all relevant gens in a single place, while still keeping the same behaviour of checking for 2M support. BSpec: 9314 BSpec: 423 Signed-off-by:
-
Matthew Auld authored
Using the gpu to write to some dword over a number of pages is rather useful, and we already have two copies of such a thing, and we don't want a third so move it to utils. There is probably some other stuff also... Signed-off-by:
-
Matthew Auld authored
As pointed out by Chris, with our current approach we are actually limited to S16_MAX * PAGE_SIZE for our size when using the blt to clear pages. Keeping things simple try to fix this by reducing the copy to a sequence of S16_MAX * PAGE_SIZE blocks. Reported-by:
-
Matthew Auld authored
Currently we just pass in bcs0->engine_context so it matters not, but in the future we may want to pass in something that is not a kernel_context, so try to be a bit more generic. Suggested-by:
-
- 09 Aug, 2019 3 commits
-
-
Daniele Ceraolo Spurio authored
Multiple uncore structures will share the debug infrastructure, so move it to a common place and add extra locking around it. Also, since we now have a separate object, it is cleaner to have dedicated functions working on the object to stop and restart the mmio debug. Apart from the cosmetic changes, this patch introduces 2 functional updates: - All calls to check_for_unclaimed_mmio will now return false when the debug is suspended, not just the ones that are active only when i915_modparams.mmio_debug is set. If we don't trust the result of the check while a user is doing mmio access then we shouldn't attempt the check anywhere. - i915_modparams.mmio_debug is not save/restored anymore around user access. The value is now never touched by the kernel while debug is disabled so no need for save/restore. v2: squash mmio_debug patches, restrict mmio_debug lock usage (Chris) Signed-off-by:
-
Chris Wilson authored
The filesystem reconfigure API is undergoing a transition, breaking our current code. As we only set the default options, we can simply remove the call to s_op->remount_fs(). In the future, when HW permits, we can try re-enabling huge page support, albeit as suggested with new per-file controls. Reported-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by:
Sedat Dilek <sedat.dilek@gmail.com> Suggested-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Chris Wilson authored
Move the timeline from being inside the intel_ring to intel_context itself. This saves much pointer dancing and makes the relations of the context to its timeline much clearer. Signed-off-by:
-
