- 21 Mar, 2018 8 commits
-
-
Xose Vazquez Perez authored
Only present through ccw bus. [mkp: applied by hand] Cc: Matthias Rudolph <Matthias.Rudolph@hitachivantara.com> Cc: Takahiro Yasui <takahiro.yasui@hitachivantara.com> Cc: Anthony Cheung <anthony.cheung@hpe.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: s390 ML <linux-s390@vger.kernel.org> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: device-mapper development <dm-devel@redhat.com> Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Xose Vazquez Perez authored
Matthias did confirm that there are no such devices. [mkp: applied by hand] Cc: Matthias Rudolph <Matthias.Rudolph@hitachivantara.com> Cc: Anthony Cheung <anthony.cheung@hpe.com> Cc: Takahiro Yasui <takahiro.yasui@hitachivantara.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: device-mapper development <dm-devel@redhat.com> Signed-off-by:
-
Xose Vazquez Perez authored
"The DISK-SUBSYSTEM is a special model name returned when LUs are not installed. For example, when LU#0 is not installed in "OPEN-" models, LU#0 is detected as the DISK-SUBSYSTEM model": https://marc.info/?l=linux-scsi&m=125424006417825 It's missing for HP XP rebranded arrays, "HP"/"OPEN-". Only the HITACHI one is present: 13f7e5ac 627511e3 Cc: Anthony Cheung <anthony.cheung@hpe.com> Cc: Takahiro Yasui <takahiro.yasui@hitachivantara.com> Cc: Matthias Rudolph <Matthias.Rudolph@hitachivantara.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Mark Brown <broonie@kernel.org> Acked-by:
Robin Murphy <robin.murphy@arm.com> Acked-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Martin K. Petersen authored
Remove references to fdomain, ncr53c400a, tmscsim, and DAC960 from Documentation/scsi. Signed-off-by: -
Colin Ian King authored
Trivial fix to spelling mistake in debug message text Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Dan Carpenter authored
In __adpt_reset() the problem is that adpt_hba_reset() frees "pHba" on error but we dereference it to print the name in the error message. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The scsi_host_put() function frees "pHba" and then we dereference it on the next line when we do "scsi_host_put(pHba->host);". [mkp: included fix from hch] Fixes: 38e09e3b ("scsi: dpt_i2o: stop using scsi_unregister") Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
- 20 Mar, 2018 7 commits
-
-
Christoph Hellwig authored
After more than 15 years all users of this legacy interface are finally gone. Rest in peace! Signed-off-by:
-
Christoph Hellwig authored
This driver hasn't seen any recent bug fixing and is one of the last drivers using the scsi_module.c infrastruture that has been deprecated 15 years ago. Signed-off-by:
-
Christoph Hellwig authored
This driver hasn't seen any recent bug fixing and is one of the last drivers using the scsi_module.c infrastruture that has been deprecated 15 years ago. Signed-off-by:
-
Christoph Hellwig authored
These drivers haven't seen any recent bug fixing and are two of the last drivers using the scsi_module.c infrastruture that has been deprecated 15 years ago. Signed-off-by:
-
Christoph Hellwig authored
Convert the driver to modern style probing. Given that there only is a single instance for a given board that can be done using a global struct Scsi_Host instance easily. Also fix the removal path by passing the correct cookie to free_irq, and enable it unconditionally. Signed-off-by:
-
Christoph Hellwig authored
esas2r has been converted to hotplug style initialization long ago, but kept various remant of the old-style scsi_module.c initialization around. Remove those. Signed-off-by:
-
Christoph Hellwig authored
This function is only used inside the SCSI midlayer, so remove the export for it. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
-
- 15 Mar, 2018 10 commits
-
-
Varun Prakash authored
32 bit port capabilities are required to support new speeds which can not be supported using 16 bit port capabilities. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Stephen Kitt authored
In preparation to enabling -Wvla, remove VLAs and replace them with fixed-length arrays instead. bfad_bsg.c uses a variable-length array declaration to measure the size of a putative array; this can be replaced by the product of the size of an element and the number of elements, avoiding the VLA altogether. This was prompted by https://lkml.org/lkml/2018/3/7/621Signed-off-by:
Stephen Kitt <steve@sk2.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Stephen Kitt authored
In preparation to enabling -Wvla, remove VLAs and replace them with fixed-length arrays instead. The arrays fixed here, using the number of constant sections, aren't really VLAs, but they appear so to the compiler. Replace the array sizes with a pre-processor-level constant instead using ARRAY_SIZE. This was prompted by https://lkml.org/lkml/2018/3/7/621Signed-off-by:
-
John Pittman authored
In the comment for function alua_alloc_pg() the argument '@h' is mistakenly referred to. Fix this by replacing it with the correct argument reference, '@tpgs', and provide a short description. Signed-off-by:
John Pittman <jpittman@redhat.com> Reviewed-by Laurence Oberman <loberman@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
This 20+ year old changelog has no useful information for kernel development or users, so remove it. Signed-off-by:
-
Christoph Hellwig authored
aha1740 doesn't use scsi_register, so it should not use scsi_unregister either. Signed-off-by:
-
Christoph Hellwig authored
Since moving away from using scsi_module.c these were never called. The implementations are called directly, though so they remain. Signed-off-by:
-
Christoph Hellwig authored
dpt_i2o doesn't use scsi_register, so it should not use scsi_unregister either. Also refactor the module exit path to make a little more sense. Signed-off-by:
-
Martin K. Petersen authored
These two drivers do not appear to be in active use. Deprecate them. Suggested-by:
-
Colin Ian King authored
There are several unions that are local to the source and do not need to be in global scope, so make them static. Also add in a missing void parameter to functions lpfc_nvme_cmd_template and lpfc_nvmet_cmd_template to clean up non-ANSI warning. Cleans up sparse warnings: drivers/scsi/lpfc/lpfc_nvme.c:68:19: warning: symbol 'lpfc_iread_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvme.c:69:19: warning: symbol 'lpfc_iwrite_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvme.c:70:19: warning: symbol 'lpfc_icmnd_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvme.c:74:24: warning: non-ANSI function 'lpfc_tsend_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvmet.c:78:19: warning: symbol 'lpfc_treceive_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvmet.c:79:19: warning: symbol 'lpfc_trsp_cmd_template' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvmet.c:83:25: warning: non-ANSI function declaration of function 'lpfc_nvmet_cmd_template' Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
- 13 Mar, 2018 15 commits
-
-
Stephen Kitt authored
In preparation to enabling -Wvla, remove VLAs and replace them with fixed-length arrays instead. scsi_dh_{alua,emc,rdac} use variable-length array declarations to store command blocks, with the appropriate size as determined by COMMAND_SIZE. This patch replaces these with fixed-sized arrays using MAX_COMMAND_SIZE, so that the array size can be determined at compile time. This was prompted by https://lkml.org/lkml/2018/3/7/621Signed-off-by:Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Finn Thain authored
In jazz_esp and sun3x_esp, the esp_driver_ops methods pass esp->dev in dma api calls as if it was a pointer to a struct device. But it actually points to a struct platform_device. Fix this. Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Reviewed-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Xiang Chen authored
Export device table of v3 hw to userspace, or auto probe will fail for v3 hw. Also change the module alias to include "pci", instead of "platform". Signed-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
-
Xiaofei Tan authored
Do some modifications for register configuring for hip08. In future, to reduce kernel churn with patches to modify registers, any registers which may change between board models (mostly PHY/SERDES related) should be set in ACPI reset handler. Signed-off-by:
Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by:
-
Xiang Chen authored
The patch does some code cleanup and fixes some small bugs: - Correct return status of phy_up_v3_hw() and phy_bcast_v3_hw() - Add static for function phy_get_max_linkrate_v3_hw() - Change exception return status when no reset method - Change magic value to ts->stat in slot_complete_vx_hw() - Remove unnecessary check for dev_is_sata() - Fix some issues of alignment and indents (Authored by Xiaofei Tan in another patch, but added here to be practical) Signed-off-by:
-
Xiaofei Tan authored
It is an implicit regulation that error code that function returned should be negative. But hisi_sas_task_prep() doesn't follow this. This may cause problems in the upper layer code. For example, in sas_expander.c of libsas, smp_execute_task_sg() may return the number of bytes of underrun. It will be conflicted with the scenaio lldd_execute_task() return an positive error code. This patch change the return value from SAS_PHY_DOWN to -ECOMM in hisi_sas_task_prep(). Signed-off-by:
-
Xiang Chen authored
The structure element hisi_sas_devices.running_req to count how many commands are active is in effect only ever written in the code, so remove it. Signed-off-by:
-
Xiaofei Tan authored
The current 110ms expiry time is not long enough for the internal abort task. The reason is that the internal abort task could be blocked in HW if the HW is retrying to set up link. The internal abort task will be executed only when the retry process finished. The maximum time is 5s for the retry of setting up link. So, the timer expire should be more than 5s. This patch increases it from 110ms to 6s. Signed-off-by:
-
Xiaofei Tan authored
It is not right to set the register PROG_PHY_LINK_RATE while PHY is still enabled. So if we want to change PHY linkrate, we need to disable PHY before setting the register PROG_PHY_LINK_RATE, and then start-up PHY. This patch is to fix this issue. Signed-off-by:
-
Xiaofei Tan authored
In sysfs, there are two files about minimum linkrate, and also two files for maximum linkrate. Take maximum linkrate example, maximum_linkrate_hw is read-only and indicated by the register HARD_PHY_LINKRATE, and maximum_linkrate is read-write and corresponding to the register PROG_PHY_LINK_RATE. But in the function phy_up_v*_hw(), we get *_linkrate value from HARD_PHY_LINKRATE. It is not right. This patch is to fix this issue. Unreferenced PHY-interrupt enum is also removed for v3 hw. Signed-off-by:
-
Xiaofei Tan authored
The register SAS_PHY_CTRL is configured according to signal quality. The signal quality is calculated by signal attenuation of hardware physical link. It may be different for different PCB layout. So, in order to give better support to new board, this patch add support to reading the devicetree property, "hisilicon,signal-attenuation". Of course, we still keep an default value in driver to adapt old board. Signed-off-by:
-
Xiaofei Tan authored
For some new boards with hip07 chipset we are required to set PHY config registers differently. The hw property which determines how to set these registers is in the PHY signal attenuation readings. This patch add an devicetree property, "hisilicon,signal-attenuation", which is used to describe the signal attenuation of an board. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Douglas Gilbert authored
The SCSI PRE-FETCH (10 or 16) command is present both on hard disks and some SSDs. It is useful when the address of the next block(s) to be read is known but it is not following the LBA of the current READ (so read-ahead won't help). It returns two "good" SCSI Status values. If the requested blocks have fitted (or will most likely fit (when the IMMED bit is set)) into the disk's cache, it returns CONDITION MET. If it didn't (or will not) fit then it returns GOOD status. The goal of this patch is to stop the SCSI subsystem treating the CONDITION MET SCSI status as an error. The current state makes the PRE-FETCH command effectively unusable via pass-throughs. Signed-off-by:
Douglas Gilbert <dgilbert@interlog.com> Reviewed-by:
-
James Smart authored
Updated Copyright in files updated as part of 12.0.0.1 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
-
James Smart authored
Update the driver version to 12.0.0.1 Signed-off-by:
-
