- 12 Oct, 2017 36 commits
-
-
Ladi Prosek authored
Entering SMM while running in guest mode wasn't working very well because several pieces of the vcpu state were left set up for nested operation. Some of the issues observed: * L1 was getting unexpected VM exits (using L1 interception controls but running in SMM execution environment) * SMM handler couldn't write to vmx_set_cr4 because of incorrect validity checks predicated on nested.vmxon * MMU was confused (walk_mmu was still set to nested_mmu) Intel SDM actually prescribes the logical processor to "leave VMX operation" upon entering SMM in 34.14.1 Default Treatment of SMI Delivery. What we need to do is basically get out of guest mode and set nested.vmxon to false for the duration of SMM. All this completely transparent to L1, i.e. L1 is not given control and no L1 observable state changes. To avoid code duplication this commit takes advantage of the existing nested vmexit and run functionality, perhaps at the cost of efficiency. To get out of guest mode, nested_vmx_vmexit with exit_reason == -1 is called, a trick already used in vmx_leave_nested. Re-entering is cleaner, using enter_vmx_non_root_mode. This commit fixes running Windows Server 2016 with Hyper-V enabled in a VM with OVMF firmware (OVMF_CODE-need-smm.fd). Signed-off-by:
Ladi Prosek <lprosek@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Ladi Prosek authored
Intel SDM 27.5.2 Loading Host Segment and Descriptor-Table Registers: "The GDTR and IDTR limits are each set to FFFFH." Signed-off-by:
-
Ladi Prosek authored
Similar to NMI, there may be ISA specific reasons why an SMI cannot be injected into the guest. This commit adds a new smi_allowed callback to be implemented in following commits. Signed-off-by:
-
Ladi Prosek authored
Entering and exiting SMM may require ISA specific handling under certain circumstances. This commit adds two new callbacks with empty implementations. Actual functionality will be added in following commits. * pre_enter_smm() is to be called when injecting an SMM, before any SMM related vcpu state has been changed * pre_leave_smm() is to be called when emulating the RSM instruction, when the vcpu is in real mode and before any SMM related vcpu state has been restored Signed-off-by:
-
Paolo Bonzini authored
It has always annoyed me a bit how SVM_EXIT_NPF is handled by pf_interception. This is also the only reason behind the under-documented need_unprotect argument to kvm_handle_page_fault. Let NPF go straight to kvm_mmu_page_fault, just like VMX does in handle_ept_violation and handle_ept_misconfig. Reviewed-by:
Brijesh Singh <brijesh.singh@amd.com> Signed-off-by:
-
Paolo Bonzini authored
Checking the mode is unnecessary, and is done without a memory barrier separating the LAPIC write from the vcpu->mode read; in addition, kvm_vcpu_wake_up is already doing a check for waiters on the wait queue that has the same effect. In practice it's safe because spin_lock has full-barrier semantics on x86, but don't be too clever. Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Tim Hansen authored
Remove redundant null checks before calling kmem_cache_destroy. Found with make coccicheck M=arch/x86/kvm on linux-next tag next-20170929. Signed-off-by:
Tim Hansen <devtimhansen@gmail.com> Signed-off-by:
-
Wanpeng Li authored
SDM mentioned: "If either the “unrestricted guest†VM-execution control or the “mode-based execute control for EPT†VM- execution control is 1, the “enable EPT†VM-execution control must also be 1." However, we can still observe unrestricted_guest is Y after inserting the kvm-intel.ko w/ ept=N. It depends on later starts a guest in order that the function vmx_compute_secondary_exec_control() can be executed, then both the module parameter and exec control fields will be amended. This patch fixes it by amending module parameter immediately during vmcs data setup. Reviewed-by:
Jim Mattson <jmattson@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
-
Wanpeng Li authored
- XCR0 is reset to 1 by RESET but not INIT - XSS is zeroed by both RESET and INIT - BNDCFGU, BND0-BND3, BNDCFGS, BNDSTATUS are zeroed by both RESET and INIT This patch does this according to SDM. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
-
Radim Krčmář authored
Our routines look at tscdeadline and period when deciding state of a timer. The timer is disarmed when switching between TSC deadline and other modes, so we should set everything to disarmed state. Signed-off-by:
-
Radim Krčmář authored
preemption timer only looks at tscdeadline and could inject already disarmed timer. Signed-off-by:
-
Radim Krčmář authored
0 should disable the timer, but start_hv_timer will recognize it as an expired timer instead. Signed-off-by:
-
Shakeel Butt authored
The kvm slabs can consume a significant amount of system memory and indeed in our production environment we have observed that a lot of machines are spending significant amount of memory that can not be left as system memory overhead. Also the allocations from these slabs can be triggered directly by user space applications which has access to kvm and thus a buggy application can leak such memory. So, these caches should be accounted to kmemcg. Signed-off-by:
Shakeel Butt <shakeelb@google.com> Signed-off-by:
-
David Hildenbrand authored
Let's just name these according to the SDM. This should make it clearer that the are used to enable exiting and not the feature itself. Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
David Hildenbrand authored
Changing it afterwards doesn't make too much sense and will only result in inconsistencies. Reviewed-by:
-
David Hildenbrand authored
Setting it to 0 leads to setting it to the default value, let's document this. Reviewed-by:
-
David Hildenbrand authored
No need for another enable_ept check. kvm->arch.ept_identity_map_addr only has to be inititalized once. Having alloc_identity_pagetable() is overkill and dropping BUG_ONs is always nice. Reviewed-by:
-
David Hildenbrand authored
They are inititally 0, so no need to reset them to 0. Signed-off-by:
-
David Hildenbrand authored
vcpu->cpu is not cleared when doing a vmx_vcpu_put/load, so this can be dropped. Reviewed-by:
-
David Hildenbrand authored
Reviewed-by:
-
David Hildenbrand authored
Without this, we won't be able to do any flushes, so let's just require it. Should be absent in very strange configurations. Suggested-by:
-
David Hildenbrand authored
ept_* function should only be called with enable_ept being set. Reviewed-by:
-
David Hildenbrand authored
This function is only called with enable_ept. Reviewed-by:
-
David Hildenbrand authored
vmx and svm use zalloc, so this is not necessary. Reviewed-by:
-
David Hildenbrand authored
Make it a void and drop error handling code. Reviewed-by:
-
David Hildenbrand authored
And also get rid of that superfluous local variable "kvm". Reviewed-by:
-
David Hildenbrand authored
Reviewed-by:
-
David Hildenbrand authored
Let's just drop the return. Reviewed-by:
-
Wanpeng Li authored
The description in the Intel SDM of how the divide configuration register is used: "The APIC timer frequency will be the processor's bus clock or core crystal clock frequency divided by the value specified in the divide configuration register." Observation of baremetal shown that when the TDCR is change, the TMCCT does not change or make a big jump in value, but the rate at which it count down change. The patch update the emulation to APIC timer to so that a change to the divide configuration would be reflected in the value of the counter and when the next interrupt is triggered. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Wanpeng Li authored
If we take TSC-deadline mode timer out of the picture, the Intel SDM does not say that the timer is disable when the timer mode is change, either from one-shot to periodic or vice versa. After this patch, the timer is no longer disarmed on change of mode, so the counter (TMCCT) keeps counting down. So what does a write to LVTT changes ? On baremetal, the change of mode is probably taken into account only when the counter reach 0. When this happen, LVTT is use to figure out if the counter should restard counting down from TMICT (so periodic mode) or stop counting (if one-shot mode). This patch is based on observation of the behavior of the APIC timer on baremetal as well as check that they does not go against the description written in the Intel SDM. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Wanpeng Li authored
Extract the logic of limit lapic periodic timer frequency to a new function, this function will be used by later patches. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Wanpeng Li authored
SDM 10.5.4.1 TSC-Deadline Mode mentioned that "Transitioning between TSC-Deadline mode and other timer modes also disarms the timer". So the APIC Timer Initial Count Register for one-shot/periodic mode should be reset. This patch do it. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Jeremy Cline authored
Make kvm_stat support Python 3 by changing the use of "print" to a function rather than a statement, switching from "iteritems" and "iterkeys" (removed in Python 3) to "items" and "keys" respectively, and decoding bytes to strings when dealing with text. With this change, kvm_stat is usable with Python 2.6 and greater. Signed-off-by:
Jeremy Cline <jeremy@jcline.org> Signed-off-by:
-
Wanpeng Li authored
KVM doesn't expose the PLE capability to the L1 hypervisor, however, ple_window still shows the default value on L1 hypervisor. This patch fixes it by clearing all the PLE related module parameter if there is no PLE capability. Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Thomas Huth authored
Paul is handling almost all of the powerpc related KVM patches nowadays, so he should be mentioned in the MAINTAINERS file accordingly. Signed-off-by:
Thomas Huth <thuth@redhat.com> Signed-off-by:
-
Haozhong Zhang authored
When KVM emulates an exit from L2 to L1, it loads L1 CR4 into the guest CR4. Before this CR4 loading, the guest CR4 refers to L2 CR4. Because these two CR4's are in different levels of guest, we should vmx_set_cr4() rather than kvm_set_cr4() here. The latter, which is used to handle guest writes to its CR4, checks the guest change to CR4 and may fail if the change is invalid. The failure may cause trouble. Consider we start a L1 guest with non-zero L1 PCID in use, (i.e. L1 CR4.PCIDE == 1 && L1 CR3.PCID != 0) and a L2 guest with L2 PCID disabled, (i.e. L2 CR4.PCIDE == 0) and following events may happen: 1. If kvm_set_cr4() is used in load_vmcs12_host_state() to load L1 CR4 into guest CR4 (in VMCS01) for L2 to L1 exit, it will fail because of PCID check. As a result, the guest CR4 recorded in L0 KVM (i.e. vcpu->arch.cr4) is left to the value of L2 CR4. 2. Later, if L1 attempts to change its CR4, e.g., clearing VMXE bit, kvm_set_cr4() in L0 KVM will think L1 also wants to enable PCID, because the wrong L2 CR4 is used by L0 KVM as L1 CR4. As L1 CR3.PCID != 0, L0 KVM will inject GP to L1 guest. Fixes: 4704d0be ("KVM: nVMX: Exiting from L2 to L1") Cc: qemu-stable@nongnu.org Signed-off-by:Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by:
-
- 10 Oct, 2017 2 commits
-
-
Ladi Prosek authored
is_last_gpte() is not equivalent to the pseudo-code given in commit 6bb69c9b ("KVM: MMU: simplify last_pte_bitmap") because an incorrect value of last_nonleaf_level may override the result even if level == 1. It is critical for is_last_gpte() to return true on level == 1 to terminate page walks. Otherwise memory corruption may occur as level is used as an index to various data structures throughout the page walking code. Even though the actual bug would be wherever the MMU is initialized (as in the previous patch), be defensive and ensure here that is_last_gpte() returns the correct value. This patch is also enough to fix CVE-2017-12188. Fixes: 6bb69c9b Cc: stable@vger.kernel.org Cc: Andy Honig <ahonig@google.com> Signed-off-by:
-
Ladi Prosek authored
The function updates context->root_level but didn't call update_last_nonleaf_level so the previous and potentially wrong value was used for page walks. For example, a zero value of last_nonleaf_level would allow a potential out-of-bounds access in arch/x86/mmu/paging_tmpl.h's walk_addr_generic function (CVE-2017-12188). Fixes: 155a97a3Signed-off-by:
-
- 09 Oct, 2017 1 commit
-
-
Linus Torvalds authored
-
- 07 Oct, 2017 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: - a couple of serious fixes: use after free and blacklist for WRITE SAME - one error leg fix: write_pending failure - one user experience problem: do not override max_sectors_kb - one minor unused function removal * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ibmvscsis: Fix write_pending failure path scsi: libiscsi: Remove iscsi_destroy_session scsi: libiscsi: Fix use-after-free race during iscsi_session_teardown scsi: sd: Do not override max_sectors_kb sysfs setting scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAP
-
