- 24 Jul, 2018 6 commits
-
-
Jacopo Mondi authored
Add 'data-enable-active' property to endpoint node properties list. The property allows to specify the polarity of the data-enable signal, which when in active state determinates when data lines have to sampled for valid pixel data. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by:
Rob Herring <robh@kernel.org> Acked-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Jacopo Mondi authored
Describe the optional endpoint properties for endpoint nodes of the R-Car VIN interface device tree bindings documentation. Signed-off-by:
-
Jacopo Mondi authored
Align description of the Gen2 and Gen3 bindings for parallel input. This commit prepares for description of optional endpoint properties in ports subnodes accepting parallel video connections. Signed-off-by:
-
Luca Ceresoli authored
ask_h gets printed here instead of ask_w. Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
Hugues Fruchet authored
Save load of mode registers array when V4L2 client sets a format or a frame interval which selects the same mode than the current one. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Sakari Ailus authored
The smiapp driver is licensed under GNU GPL v2 only, as stated by the header. Reflect this in the MODULE_LICENSE macro. Signed-off-by:
-
- 13 Jul, 2018 1 commit
-
-
Sean Young authored
Currently we are leaking bpf programs when they are detached from the lirc device; the refcount never reaches zero. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
- 04 Jul, 2018 33 commits
-
-
Sylwester Nawrocki authored
This patch fixes potential NULL pointer dereference as indicated by the following static checker warning: drivers/media/platform/exynos4-is/fimc-isp-video.c:408 isp_video_try_fmt_mplane() error: NULL dereference inside function '__isp_video_try_fmt(isp, &f->fmt.pix_mp, (0))()'. Fixes: 34947b8a: ("[media] exynos4-is: Add the FIMC-IS ISP capture DMA driver") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Wolfram Sang authored
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by:
-
Wolfram Sang authored
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by:
-
Maciej S. Szmigiero authored
For some types of tuners (Philips FMD1216ME(X) MK3 currently) we know that letting TDA9887 output port 1 remain high (inactive) will switch FM radio to mono mode. Let's make use of this functionality - nothing changes for the default stereo radio mode. Tested on a Medion 95700 board which has a FMD1216ME tuner. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Maciej S. Szmigiero authored
This commit describes a device instance private data of the driver (struct cx25840_state) in a kernel-doc style comment. Signed-off-by:
-
Maciej S. Szmigiero authored
We need to zero-initialize cx25840 platform data structure to make sure that its future members do not contain random stack garbage. Signed-off-by:
-
Keiichi Watanabe authored
Add V4L2_CID_MPEG_VIDEO_VP9_PROFILE control in MediaTek decoder's driver. MediaTek decoder only supports profile 0 for now. Signed-off-by:
Keiichi Watanabe <keiichiw@chromium.org> Signed-off-by:
-
Keiichi Watanabe authored
Add a new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE for VP9 profiles. This control allows selecting the desired profile for VP9 encoder and querying for supported profiles by VP9 encoder/decoder. Though this control is similar to V4L2_CID_MPEG_VIDEO_VP8_PROFILE, we need to separate this control from it because supported profiles usually differ between VP8 and VP9. Signed-off-by:
-
Keiichi Watanabe authored
Add a menu control V4L2_CID_MPEG_VIDEO_VP8_PROFILE for VP8 profile and make V4L2_CID_MPEG_VIDEO_VPX_PROFILE an alias of it. This new control is used to select the desired profile for VP8 encoder and query for supported profiles by VP8 encoder/decoder. Though we have originally a control V4L2_CID_MPEG_VIDEO_VPX_PROFILE and its name contains 'VPX', it works only for VP8 because supported profiles usually differ between VP8 and VP9. In addition, this control cannot be used for querying since it is not a menu control but an integer control, which cannot return an arbitrary set of supported profiles. The new control V4L2_CID_MPEG_VIDEO_VP8_PROFILE is a menu control as with controls for other codec profiles. (e.g. H264) In addition, this patch also fixes the use of V4L2_CID_MPEG_VIDEO_VPX_PROFILE in drivers of Qualcomm's venus and Samsung's s5p-mfc. Signed-off-by:
-
Jan Luebbe authored
The IPU can only capture RGB565 with two 8-bit cycles in bayer/generic mode on the parallel bus, compared to a specific mode on MIPI CSI-2. To handle this, we extend imx_media_pixfmt with a cycles per pixel field, which is used for generic formats on the parallel bus. Based on the selected format and bus, we then update the width to account for the multiple cycles per pixel. Signed-off-by:
Jan Luebbe <jlu@pengutronix.de> Signed-off-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Jan Luebbe authored
By checking and handling the internal IPU formats (ARGB or AYUV) first, we don't need to check whether it's a bayer format, as we can default to passing the input format on in all other cases. This simplifies handling the different configurations for RGB565 between parallel and MIPI CSI-2, as we don't need to check the details of the format anymore. Signed-off-by:
-
Peter Seiderer authored
- enables gstreamer v4l2src lost frame detection, e.g: 0:00:08.685185668 348 0x54f520 WARN v4l2src gstv4l2src.c:970:gst_v4l2src_create:<v4l2src0> lost frames detected: count = 141 - ts: 0:00:08.330177332 - fixes v4l2-compliance test failure: Streaming ioctls: test read/write: OK (Not Supported) Video Capture: Buffer: 0 Sequence: 0 Field: None Timestamp: 92.991450s Buffer: 1 Sequence: 0 Field: None Timestamp: 93.008135s fail: v4l2-test-buffers.cpp(294): (int)g_sequence() < seq.last_seq + 1 fail: v4l2-test-buffers.cpp(707): buf.check(q, last_seq) Signed-off-by:Peter Seiderer <ps.report@gmx.net> Reviewed-by:
-
Peter Seiderer authored
- fixes gstreamer v4l2src warning: 0:00:00.716640334 349 0x164f720 WARN v4l2bufferpool gstv4l2bufferpool.c:1195:gst_v4l2_buffer_pool_dqbuf:<v4l2src0:pool:src> Driver should never set v4l2_buffer.field to ANY - fixes v4l2-compliance test failure: Streaming ioctls: test read/write: OK (Not Supported) Video Capture: Buffer: 0 Sequence: 0 Field: Any Timestamp: 58.383658s fail: v4l2-test-buffers.cpp(297): g_field() == V4L2_FIELD_ANY Signed-off-by: -
Jacopo Mondi authored
Add compatible string for R-Car D3 R8A7795 to list of SoCs supported by rcar-vin driver. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Jacopo Mondi authored
Add R-Car R8A77995 SoC to the rcar-vin supported ones. Signed-off-by:
-
Jacopo Mondi authored
Remove leading underscore to align all rcar_group_route structure declarations. Signed-off-by:
-
Jacopo Mondi authored
Handle parallel subdevices in link_notify callback. If the notified link involves a parallel subdevice, do not change routing of the VIN-CSI-2 devices and mark the VIN instance as using a parallel input. If the CSI-2 link setup succeeds instead, mark the VIN instance as using CSI-2. Signed-off-by:
-
Jacopo Mondi authored
When running with media-controller link the parallel input media entities with the VIN entities at 'complete' callback time. To create media links the v4l2_device should be registered first. Check if the device is already registered, to avoid double registrations. Signed-off-by:
-
Jacopo Mondi authored
The rcar-vin driver so far had a mutually exclusive code path for handling parallel and CSI-2 video input subdevices, with only the CSI-2 use case supporting media-controller. As we add support for parallel inputs to Gen3 media-controller compliant code path now parse both port@0 and port@1, handling the media-controller use case in the parallel bound/unbind notifier operations. Signed-off-by:
-
Jacopo Mondi authored
Media bus configuration flags and media bus type were so far a property of each VIN instance, as the subdevice they were connected to was immutable during the whole system life time. With the forth-coming introduction of parallel input devices support, a VIN instance can have the subdevice it is connected to switched at runtime, from a CSI-2 subdevice to a parallel one and viceversa, through the modification of links between media entities in the media controller graph. To avoid discarding the per-subdevice configuration flags retrieved by v4l2_fwnode parsing facilities, cache them in the 'rvin_graph_entity' member of each VIN instance, opportunely renamed to 'rvin_parallel_entity'. Also modify the register configuration function to take mbus flags into account when running on a bus type that supports them. The media bus type currently in use will be updated in a follow-up patch to the link state change notification function. Signed-off-by:
-
Jacopo Mondi authored
During the notifier initialization, memory for the list of associated async subdevices is reserved during the fwnode endpoint parsing from the v4l2-async framework. If the notifier registration fails, that memory should be released and the notifier 'cleaned up'. Catch the notifier registration error and perform the cleanup both for the group and the parallel notifiers. Signed-off-by:
-
Jacopo Mondi authored
As CSI-2 subdevices are shared between several VIN instances, a shared notifier to collect the CSI-2 async subdevices is required. So far, the rcar-vin driver used the notifier of the last VIN instance to probe but with the forth-coming introduction of parallel input subdevices support in mc-compliant code path, each VIN may register its own notifier if any parallel subdevice is connected there. To avoid registering a notifier twice (once for parallel subdev and one for the CSI-2 subdevs) create a group notifier, shared by all the VIN instances. Signed-off-by:
-
Jacopo Mondi authored
Remove un-necessary empty lines. Signed-off-by:
-
Jacopo Mondi authored
As the term 'digital' is used all over the rcar-vin code in place of 'parallel', rename all the occurrencies. Signed-off-by:
-
Hans Verkuil authored
Request API requires a media node. Add one to the vim2m driver so we can use requests with it. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Ezequiel Garcia authored
A memory-to-memory pipeline device consists in three entities: two DMA engine and one video processing entities. The DMA engine entities are linked to a V4L interface. This commit add a new v4l2_m2m_{un}register_media_controller API to register this topology. For instance, a typical mem2mem device topology would look like this: Device topology - entity 1: source (1 pad, 1 link) type Node subtype V4L flags 0 pad0: Source -> "proc":1 [ENABLED,IMMUTABLE] - entity 3: proc (2 pads, 2 links) type Node subtype Unknown flags 0 pad0: Source -> "sink":0 [ENABLED,IMMUTABLE] pad1: Sink <- "source":0 [ENABLED,IMMUTABLE] - entity 6: sink (1 pad, 1 link) type Node subtype V4L flags 0 pad0: Sink <- "proc":0 [ENABLED,IMMUTABLE] [hans.verkuil@cisco.com: mark interface links as IMMUTABLE] Suggested-by: -
Hans Verkuil authored
Currently links between entities and an interface are just marked as ENABLED. But (at least today) these links cannot be disabled by userspace or the driver, so they should also be marked as IMMUTABLE. It might become possible that drivers can disable such links (if for some reason the device node cannot be used), so we might need to add a new link flag at some point to mark interface links that can be changed by the driver but not by userspace. Acked-by:
-
Hans Verkuil authored
When you switch from auto to manual mode for an auto-cluster (e.g. autogain+gain controls), then the current HW value has to be copied to the current control value. However, has_changed was never set to true, so new_to_cur didn't actually copy this value. Reported-by:
-
Alexey Khoroshilov authored
viu_of_probe() ignores fails in i2c_get_adapter(), tries to unlock uninitialized mutex on error path. The patch streamlining the error handling in viu_of_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Philipp Zabel authored
This patch adds the i.MX6 CODA960 firmware versions 2.1.9 (revision 32515) to the list of supported firmware versions. Signed-off-by:
-
Philipp Zabel authored
Explicitly clear DEC_SEQ_JPG_THUMB_EN during sequence initialization. Not clearing the register does not cause problems, since the only other codec (MPEG-4 decode) that writes to this register happens to always write 0 as well. Signed-off-by:
-
Philipp Zabel authored
Padding the bitstream buffer is not enough to reliably avoid prefetch failures. Picture runs with the next buffer's header already visible to the CODA7541 succeed much more reliably, so always queue two JPEG frames into the bitstream buffer. Signed-off-by:
-
Philipp Zabel authored
The hardware codec is not colorspace aware. We should trust userspace to set the correct colorimetry information on the OUTPUT queue and mirror the exact same setting on the CAPTURE queue. There is no reason to restrict colorspace to JPEG for JPEG images, if userspace injects the correct colorspace information into the JPEG headers after encoding. Fixes: b14ac545 ("[media] coda: improve colorimetry handling") Signed-off-by:
-
