Skip to content

L
linux
Switch branch/tag
  1. 21 Feb, 2014 2 commits
    • Linus Torvalds's avatar
      Merge tag 'iommu-fixes-v3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu · 7777d934
      Linus Torvalds authored 
      Pull IOMMU fixes from Joerg Roedel:
 "The fixes are only for the ARM-SMMU driver.  Here is the summary from
  Will Deacon:

   - Andreas Herrmann took the driver for a run with a real SATA
     controller, which caused the new mutex-based locking to explode
     since we require mappings in atomic context

   - Yifan fixed an issue with the page table creation, which then
     caused breakages with the way in which we flush descriptors out to
     the table walker

   - I ran the driver on a system where the SMMU is hooked into a
     coherent interconnect for table walks, and noticed a shareability
     mismatch between the CPU and the SMMU

  These issues are all fixed here and have been tested on both arm and
  arm64 based systems.

  Besides that I put a fix on-top to make the spinlock irq-safe, so that
  the code-paths can be used in the DMA-API"

* tag 'iommu-fixes-v3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  arm/smmu: Use irqsafe spinlock for domain lock
  iommu/arm-smmu: fix compilation issue when !CONFIG_ARM_AMBA
  iommu/arm-smmu: set CBARn.BPSHCFG to NSH for s1-s2-bypass contexts
  iommu/arm-smmu: fix table flushing during initial allocations
  iommu/arm-smmu: really fix page table locking
  iommu/arm-smmu: fix pud/pmd entry fill sequence
      7777d934
    • Linus Torvalds's avatar
      Merge tag 'sound-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · 04133209
      Linus Torvalds authored 
      Pull sound fixes from Takashi Iwai:
 "This time we got a slightly higher volume than previous times, but all
  device-specific good fixes.  Noticeable changes are fixes in davinci,
  and the removal of open-codes in HD-audio ca0132 driver.  The rest are
  all small fixes and/or quirks"

* tag 'sound-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Enable front audio jacks on one HP desktop model
  ALSA: hda/ca0132 - Fix recording from mode id 0x8
  ALSA: hda/ca0132 - setup/cleanup streams
  ALSA: hda - add headset mic detect quirks for two Dell laptops
  ALSA: usb-audio: work around KEF X300A firmware bug
  ASoC: max98090: make REVISION_ID readable
  ASoC: txx9aclc_ac97: Fix kernel crash on probe
  ASoC: max98090: sync regcache on entering STANDBY
  ASoC: blackfin: Fix machine driver Kconfig dependencies
  ASoC: da9055: Fix device registration of PMIC and CODEC devices
  ASoC: fsl-esai: fix ESAI TDM slot setting
  ASoC: fsl: fix pm support of machine drivers
  ASoC: rt5640: Add ACPI ID for Intel Baytrail
  ASoC: davinci-evm: Add pm callbacks to platform driver
  ASoC: davinci-mcasp: Consolidate pm_runtime_get/put() use in the driver
  ASoC: davinci-mcasp: Configure xxTDM, xxFMT and xxFMCT registers synchronously
  ASoC: davinci-mcasp: Harmonize the sub hw_params function names
  ASoC: samsung: Fix trivial typo
  ASoC: samsung: Remove invalid dependencies
  ASoC: wm8993: drop regulator_bulk_free of devm_ allocated data
      04133209
  3. 20 Feb, 2014 9 commits
  5. 19 Feb, 2014 15 commits
  7. 18 Feb, 2014 14 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · b0d3f6d4
      Linus Torvalds authored 
      Pull networking fixes from David Miller:

 1) kvaser CAN driver has fixed limits of some of it's table, validate
    that we won't exceed those limits at probe time.  Fix from Olivier
    Sobrie.

 2) Fix rtl8192ce disabling interrupts for too long, from Olivier
    Langlois.

 3) Fix botched shift in ath5k driver, from Dan Carpenter.

 4) Fix corruption of deferred packets in TIPC, from Erik Hugne.

 5) Fix newlink error path in macvlan driver, from Cong Wang.

 6) Fix netpoll deadlock in bonding, from Ding Tianhong.

 7) Handle GSO packets properly in forwarding path when fragmentation is
    necessary on egress, from Florian Westphal.

 8) Fix axienet build errors, from Michal Simek.

 9) Fix refcounting of ubufs on tx in vhost net driver, from Michael S
    Tsirkin.

10) Carrier status isn't set properly in hyperv driver, from Haiyang
    Zhang.

11) Missing pci_disable_device() in tulip_remove_one), from Ingo Molnar.

12) AF_PACKET qdisc bypass mode doesn't adhere to driver provided TX
    queue selection method.  Add a fallback method mechanism to fix this
    bug, from Daniel Borkmann.

13) Fix regression in link local route handling on GRE tunnels, from
    Nicolas Dichtel.

14) Bonding can assign dup aggregator IDs in some sequences of
    configuration, fix by making the allocation counter per-bond instead
    of global.  From Jiri Bohac.

15) sctp_connectx() needs compat translations, from Daniel Borkmann.

16) Fix of_mdio PHY interrupt parsing, from Ben Dooks

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
  MAINTAINERS: add entry for the PHY library
  of_mdio: fix phy interrupt passing
  net: ethernet: update dependency and help text of mvneta
  NET: fec: only enable napi if we are successful
  af_packet: remove a stray tab in packet_set_ring()
  net: sctp: fix sctp_connectx abi for ia32 emulation/compat mode
  ipv4: fix counter in_slow_tot
  irtty-sir.c: Do not set_termios() on irtty_close()
  bonding: 802.3ad: make aggregator_identifier bond-private
  usbnet: remove generic hard_header_len check
  gre: add link local route when local addr is any
  batman-adv: fix potential kernel paging error for unicast transmissions
  batman-adv: avoid double free when orig_node initialization fails
  batman-adv: free skb on TVLV parsing success
  batman-adv: fix TT CRC computation by ensuring byte order
  batman-adv: fix potential orig_node reference leak
  batman-adv: avoid potential race condition when adding a new neighbour
  batman-adv: properly check pskb_may_pull return value
  batman-adv: release vlan object after checking the CRC
  batman-adv: fix TT-TVLV parsing on OGM reception
  ...
      b0d3f6d4
    • Linus Torvalds's avatar
      Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm · 91c6c8dc
      Linus Torvalds authored 
      Pull ARM fixes from Russell King:
 "A range of ARM fixes.  Biggest change is the stage-2 attributes used
  for for hyp mode which were wrong.  I've killed some bits in a couple
  of DT files which turned out not to be required, and a few other
  fixes.

  One fix touches code outside of arch/arm, which is related to sorting
  out the DMA masks correctly.  There is a long standing issue with the
  conversion from PFNs to addresses where people assume that shifting an
  unsigned long left by PAGE_SHIFT results in a correct address.  This
  is not the case with C: the integer promotion happens at assignment
  after evaluation.  This fixes the recently introduced dma_max_pfn()
  function, but there's a number of other places where we try this
  directly on an unsigned long in the mm code"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 7957/1: add DSB after icache flush in __flush_icache_all()
  Fix uses of dma_max_pfn() when converting to a limiting address
  ARM: 7955/1: spinlock: ensure we have a compiler barrier before sev
  ARM: 7953/1: mm: ensure TLB invalidation is complete before enabling MMU
  ARM: 7952/1: mm: Fix the memblock allocation for LPAE machines
  ARM: 7950/1: mm: Fix stage-2 device memory attributes
  ARM: dts: fix spdif pinmux configuration
      91c6c8dc
    • Linus Torvalds's avatar
      Merge tag 'jfs-3.14-rc4' of git://github.com/kleikamp/linux-shaggy · 341bbdc5
      Linus Torvalds authored 
      Pull jfs fix from David Kleikamp:
 "Another ACL regression. This one more subtle"

* tag 'jfs-3.14-rc4' of git://github.com/kleikamp/linux-shaggy:
  jfs: set i_ctime when setting ACL
      341bbdc5
    • Tejun Heo's avatar
      cgroup: update cgroup_enable_task_cg_lists() to grab siglock · 532de3fc
      Tejun Heo authored 
      Currently, there's nothing preventing cgroup_enable_task_cg_lists()
from missing set PF_EXITING and race against cgroup_exit().  Depending
on the timing, cgroup_exit() may finish with the task still linked on
css_set leading to list corruption.  Fix it by grabbing siglock in
cgroup_enable_task_cg_lists() so that PF_EXITING is guaranteed to be
visible.

This whole on-demand cg_list optimization is extremely fragile and has
ample possibility to lead to bugs which can cause things like
once-a-year oops during boot.  I'm wondering whether the better
approach would be just adding "cgroup_disable=all" handling which
disables the whole cgroup rather than tempting fate with this
on-demand craziness.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Acked-by: default avatarLi Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
      532de3fc
    • Florian Fainelli's avatar
      MAINTAINERS: add entry for the PHY library · 22f08ad9
      Florian Fainelli authored 
      The PHY library has been subject to some changes, new drivers and DT
interactions over the past few months. Add myself as a maintainer for
the core PHY library parts and drivers. Make sure the PHY library entry
also covers the Device Tree files which have a close interaction with
the MDIO bus, PHY connection and Ethernet PHY mode parsing.

CC: Grant Likely <grant.likely@linaro.org>
CC: Shaohui Xie <shaohui.xie@freescale.com>
CC: Andy Fleming <afleming@gmail.com>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      22f08ad9
    • Ben Dooks's avatar
      of_mdio: fix phy interrupt passing · f15c586d
      Ben Dooks authored 
      The of_mdiobus_register_phy() is not setting phy->irq thus causing
some drivers to incorrectly assume that the PHY does not have an
IRQ associated with it. Not only do some drivers report no IRQ
they do not install an interrupt handler for the PHY.

Simplify the code setting irq and set the phy->irq at the same
time so that we cover the following issues, which should cover
all the cases the code will find:

- Set phy->irq if node has irq property and mdio->irq is NULL
- Set phy->irq if node has no irq and mdio->irq is not NULL
- Leave phy->irq as PHY_POLL default if none of the above

This fixes the issue:
 net eth0: attached PHY 1 (IRQ -1) to driver Micrel KSZ8041RNLI

to the correct:
 net eth0: attached PHY 1 (IRQ 416) to driver Micrel KSZ8041RNLI
Signed-off-by: default avatarBen Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f15c586d
    • Thomas Petazzoni's avatar
      net: ethernet: update dependency and help text of mvneta · 4b636b53
      Thomas Petazzoni authored 
      With the introduction of the support for Armada 375 and Armada 38x,
the hidden Kconfig option MACH_ARMADA_370_XP is being renamed to
MACH_MVEBU_V7. Therefore, the dependency that was used for the mvneta
driver can no longer work. This commit replaces this dependency by a
dependency on PLAT_ORION, which is used similarly for the mv643xx_eth
driver.

In addition to this, it takes this opportunity to adjust the
description and help text to indicate that the driver can is also used
for Armada 38x. Note that Armada 375 cannot use this driver as it has
a completely different networking unit, which will require a separate
driver.
Signed-off-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: default avatarJason Cooper <jason@lakedaemon.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4b636b53
    • Russell King's avatar
      NET: fec: only enable napi if we are successful · ce5eaf02
      Russell King authored 
      If napi is left enabled after a failed attempt to bring the interface
up, we BUG:

fec 2188000.ethernet eth0: no PHY, assuming direct connection to switch
libphy: PHY fixed-0:00 not found
fec 2188000.ethernet eth0: could not attach to PHY
------------[ cut here ]------------
kernel BUG at include/linux/netdevice.h:502!
Internal error: Oops - BUG: 0 [#1] SMP ARM
...
PC is at fec_enet_open+0x4d0/0x500
LR is at __dev_open+0xa4/0xfc

Only enable napi after we are past all the failure paths.
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ce5eaf02
    • Dan Carpenter's avatar
      af_packet: remove a stray tab in packet_set_ring() · d7cf0c34
      Dan Carpenter authored 
      At first glance it looks like there is a missing curly brace but
actually the code works the same either way.  I have adjusted the
indenting but left the code the same.
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Acked-by: default avatarDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d7cf0c34
    • Dave Airlie's avatar
      Merge tag 'ttm-fixes-3.14-2014-02-18' of git://people.freedesktop.org/~thomash/linux into drm-fixes · 75936c65
      Dave Airlie authored 
      Pull request of 2014-02-18

One compile fix and one memory leak.

* tag 'ttm-fixes-3.14-2014-02-18' of git://people.freedesktop.org/~thomash/linux:
  drm/ttm: Fix memory leak in ttm_agp_backend.c
  drm/ttm: declare 'struct device' in ttm_page_alloc.h
      75936c65
    • Dave Airlie's avatar
      Merge tag 'vmwgfx-fixes-3.14-2014-02-18' of... · 9830e44f
      Dave Airlie authored 
      Merge tag 'vmwgfx-fixes-3.14-2014-02-18' of git://people.freedesktop.org/~thomash/linux into drm-fixes

Pull request of 2014-02-18.

Nothing special. The biggest change is adding a couple of command defines and
packing the command data correctly.

* tag 'vmwgfx-fixes-3.14-2014-02-18' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Fix command defines and checks
  drm/vmwgfx: Fix possible integer overflow
  drm/vmwgfx: Remove stray const
  drm/vmwgfx: unlock on error path in vmw_execbuf_process()
  drm/vmwgfx: Get maximum mob size from register SVGA_REG_MOB_MAX_SIZE
  drm/vmwgfx: Fix a couple of sparse warnings and errors
      9830e44f
    • Dave Airlie's avatar
      Merge branch 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux into drm-fixes · 560591f1
      Dave Airlie authored 
      Fix for 128x128 cursors, along with some misc fixes.

* 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon/ni: fix typo in dpm sq ramping setup
  drm/radeon/si: fix typo in dpm sq ramping setup
  drm/radeon: fix CP semaphores on CIK
  drm/radeon: delete a stray tab
  drm/radeon: fix display tiling setup on SI
  drm/radeon/dpm: reduce r7xx vblank mclk threshold to 200
  drm/radeon: fill in DRM_CAPs for cursor size
  drm: add DRM_CAPs for cursor size
  drm/radeon: unify bpc handling
      560591f1
    • David S. Miller's avatar
      Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless · d3ec67c0
      David S. Miller authored 
      John W. Linville says:

====================
Please pull this batch of fixes intended for the 3.14 stream...

For the iwlwifi one, Emmanuel says:

"As explicitly written in the commit message, we prefer to disable Tx
AMPDU on NICs supported by iwldvm. This feature gives a big boost in
Tx performance, but the firmware is buggy and we can't rely on it.
Our hope is that most of the users out there want wifi to surf on
the web which means that they care more for Rx traffic than for Tx.
People who want to enable it can do so with the help of a module
parameter."

On top of that...

Dan Carpenter fixes a typo/thinko in ath5k.

Olivier Langlois fixes a couple of rtlwifi issues, one which leaves
IRQs disabled too long (causing a variety of problems elsewhere),
and one which fixes an incorrect return code when failing to enable
the NIC.

Russell King fixes a NULL pointer dereference in hostap.

Stanislaw Gruszka fixes a DMA coherence issue in the rtl8187 driver.

Please let me know if there are problems!
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d3ec67c0
    • Lai Jiangshan's avatar
      workqueue: ensure @task is valid across kthread_stop() · 5bdfff96
      Lai Jiangshan authored 
      When a kworker should die, the kworkre is notified through WORKER_DIE
flag instead of kthread_should_stop().  This, IIRC, is primarily to
keep the test synchronized inside worker_pool lock.  WORKER_DIE is
first set while holding pool->lock, the lock is dropped and
kthread_stop() is called.

Unfortunately, this means that there's a slight chance that the target
kworker may see WORKER_DIE before kthread_stop() finishes and exits
and frees the target task before or during kthread_stop().

Fix it by pinning the target task before setting WORKER_DIE and
putting it after kthread_stop() is done.

tj: Improved patch description and comment.  Moved pinning above
    WORKER_DIE for better signify what it's protecting.

CC: stable@vger.kernel.org
Signed-off-by: default avatarLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      5bdfff96
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7