- 19 Jul, 2007 12 commits
-
-
Jean Delvare authored
We have the following naming convention documented in Documentation/hwmon/sysfs-interface for fault files: in[0-*]_input_fault fan[1-*]_input_fault temp[1-*]_input_fault Some drivers follow this convention (lm63, lm83, lm90, smsc47m192). However some drivers omit the "input" part and create files named fan1_fault (pc87427) or temp1_fault (dme1737). And the new "generic" libsensors follows this second (non-standard) convention, so it fails to report fault conditions for drivers which follow the standard. We want a single naming scheme, and everyone seems to prefer the shorter variant, so let's go for it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Rainer Birkenmaier authored
Signed-off-by: Rainer Birkenmaier <rainer.birkenmaier@siemens.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
Use platform_device_add_data() in hardware monitoring drivers. This makes the code nicer and smaller too. Reported by David Hubbard. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Hubbard <david.c.hubbard@gmail.com>
-
Jean Delvare authored
Convert the pc87360 driver from the nonsensical i2c-isa hack to a regular platform driver. This is a direct conversion, other cleanups could happen on top of that. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jim Cromie <jim.cromie@gmail.com>
-
Juerg Haefliger authored
Add documentation for the new SMSC DME1737 driver. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Juerg Haefliger authored
Add support for the hardware monitoring and fan control capabilities of the SMSC DME1737 and Asus A8000 Super-I/O chips. The hardware monitoring logic of this chip is similar to the LM85 but has some additional features that this driver supports. Even though it's a Super-I/O chip, the hardware monitoring logic can only be accessed via SMBus. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
Future versions of libsensors will need this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
-
Jean Delvare authored
This lets us get rid of macro-generated functions and shrinks the driver size by about 8%. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
-
Jean Delvare authored
* Discard comments which do not apply or are redundant. * Remove a few useless instructions. * Rename new_client to just client. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
-
Jean Delvare authored
Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Mark M. Hoffman authored
Mark M. Hoffman is taking over for Jean Delvare as maintainer of the hwmon subsystem. He is also the author/maintainer for several existing drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
-
- 08 Jul, 2007 6 commits
-
-
Linus Torvalds authored
Woo-hoo. I'm sure somebody will report a "this doesn't compile, and I have a new root exploit" five minutes after release, but it still feels good ;) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: qd65xx: fix PIO mode selection sis5513: adding PCI-ID
-
Linus Torvalds authored
Commit 1c710c89 added the utimensat() system call, but didn't handle the case of checking for the writability of the target right, when the target was a file descriptor, not a filename. We cannot use vfs_permission(MAY_WRITE) for that case, and need to simply check whether the file descriptor is writable. The oops from using the wrong function was noticed and narrowed down by Markus Trippelsdorf. Cc: Ulrich Drepper <drepper@redhat.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Peter Zijlstra authored
Fix a post-2.6.21 regression. read_cache_page_async() has two invocations of mark_page_accessed() which will launch pages right onto the active list. Remove the first one, keeping the latter one. This avoids marking unwanted pages active (in the retry loop). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Bartlomiej Zolnierkiewicz authored
PIO4 is a maximum PIO mode supported by a driver. Using "255" as a max_mode argument to ide_get_best_pio_mode() could result in wrong timings being used by a driver (for "pio" equal to 5) or OOPS (for "pio" values > 5 && < 255). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Reviewed-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
-
Uwe Koziolek authored
The SiS966 has one additional PCI-ID 1180. If the chipset is using this PCI-ID, the primary channel is connected to the first PATA-port. The secondary channel is connected to SATA-ports in IDE emulation mode. The legacy IO-ports are used. The including of the PCI-ID into pata_sis is not sufficient, because the legacy driver in drivers/ide is initialized before pata_sis. Signed-off-by: Uwe Koziolek <uwe.koziolek@gmx.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
- 07 Jul, 2007 4 commits
-
-
Adrian Bunk authored
The dependency of DLM on SYSFS got lost in commit 6ed7257b resulting in the following compile error with CONFIG_DLM=y, CONFIG_SYSFS=n: <-- snip --> ... LD .tmp_vmlinux1 fs/built-in.o: In function `dlm_lockspace_init': /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/fs/dlm/lockspace.c:231: undefined reference to `kernel_subsys' fs/built-in.o: In function `configfs_init': /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/fs/configfs/mount.c:143: undefined reference to `kernel_subsys' make[1]: *** [.tmp_vmlinux1] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Jones authored
The printk level in this printk is bogus, as the previous printk didn't have a terminating \n resulting in .. Intel E7520/7320/7525 detected.<6>Disabling irq balancing and affinity It also never printed a \n at all in the case where we didn't do the quirk. Change it to only make noise if it actually does something useful. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Adrian Bunk authored
This patch fixes the following 2.6.22 regression with CONFIG_KALLSYMS=n: <-- snip --> ... CC arch/m32r/kernel/traps.o In file included from /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/arch/m32r/kernel/traps.c:14: /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h: In function 'lookup_symbol_name': /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h:66: error: 'ERANGE' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h:66: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h:66: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h: In function 'lookup_symbol_attrs': /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/include/linux/kallsyms.h:71: error: 'ERANGE' undeclared (first use in this function) make[2]: *** [arch/m32r/kernel/traps.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Woodhouse authored
When cleaning up HIDP sessions, we currently close the ACL connection before deregistering the input device. Closing the ACL connection schedules a workqueue to remove the associated objects from sysfs, but the input device still refers to them -- and if the workqueue happens to run before the input device removal, the kernel will oops when trying to look up PHYSDEVPATH for the removed input device. Fix this by deregistering the input device before closing the connections. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 06 Jul, 2007 18 commits
-
-
Christoph Lameter authored
kmem_cache_open is static. EXPORT_SYMBOL was leftover from some earlier time period where kmem_cache_open was usable outside of slub. (Fixes powerpc build error) Signed-off-by: Chrsitoph Lameter <clameter@sgi.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
maximilian attems authored
davem kindly moved the list from osdl to vger. Signed-of-by: maximilian attems <max@stro.at> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andres Salomon authored
Writing to MSR 0x51400017 forces a hard reset on CS5536-based machines, this has the reboot fixup do just that if such a board is detected. Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETPOLL]: Fixups for 'fix soft lockup when removing module' [NET]: net/core/netevent.c should #include <net/netevent.h> [NETFILTER]: nf_conntrack_h323: add checking of out-of-range on choices' index values [NET] skbuff: remove export of static symbol SCTP: Add scope_id validation for link-local binds SCTP: Check to make sure file is valid before setting timeout SCTP: Fix thinko in sctp_copy_laddrs()
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix scheduling latency issue on 24K, 34K and 74K cores [MIPS] Add macros to encode processor revisions. [MIPS] RM7000: Enable ICACHE_REFILLS_WORKAROUND_WAR. [MIPS] SMTC: Fix cut'n'paste bug in Kconfig.debug [MIPS] Change libgcc-style functions from lib-y to obj-y [MIPS] Fix timer/performance interrupt detection [MIPS] AP/SP: Avoid triggering the 34K E125 performance issue [MIPS] 64-bit TO_PHYS_MASK macro for RM9000 processors
-
Peter Zijlstra authored
Line up the vmstat_text with zone_stat_item enum zone_stat_item { /* First 128 byte cacheline (assuming 64 bit words) */ NR_FREE_PAGES, NR_INACTIVE, NR_ACTIVE, We current have nr_active and nr_inactive reversed. [ "OK with patch, though using initializers canbe handy to prevent such things in future: static const char * const vmstat_text[] = { [NR_FREE_PAGES] = "nr_free_pages", ..." - Alexey ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yoann Padioleau authored
In 7d12e780 David Howells performed this evolution: "IRQ: Maintain regs pointer globally rather than passing to IRQ handlers" He correctly updated many of the function definitions that were using this extra regs pointer parameter but forgot to update some caller sites of those functions. The reason the modifications was not properly done on all drivers is that some drivers were rarely compiled because they are for AMIGA, or that some code sites were inside #ifdefs where the option is not set or inside #if 0. Here is the semantic patch that found the occurences and fixed the problem. @ rule1 @ identifier fn; identifier irq, dev_id; typedef irqreturn_t; @@ static irqreturn_t fn(int irq, void *dev_id) { ... } @@ identifier rule1.fn; expression E1, E2, E3; @@ fn(E1, E2 - ,E3 ) Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Vivek Goyal authored
o Commit 1833d6bc broke the build if compiled with CONFIG_ES7000=y and CONFIG_X86_GENERICARCH=n arch/i386/kernel/built-in.o(.init.text+0x4fa9): In function `acpi_parse_madt': : undefined reference to `acpi_madt_oem_check' arch/i386/kernel/built-in.o(.init.text+0x7406): In function `smp_read_mpc': : undefined reference to `mps_oem_check' arch/i386/kernel/built-in.o(.init.text+0x8990): In function `connect_bsp_APIC': : undefined reference to `enable_apic_mode' make: *** [.tmp_vmlinux1] Error 1 o Fix the build issue. Provided the definitions of missing functions. o Don't have ES7000 machine. Only compile tested. Cc: Len Brown <lenb@kernel.org> Cc: Natalie Protasevich <protasnb@gmail.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Bjorn Helgaas authored
When we enable the SMCf010 IR device, the Toshiba Portege 4000 BIOS claims the device is working, but it really isn't configured correctly. The BIOS *will* configure it, but only if we call _SRS after (1) reversing the order of the SIR and FIR I/O port regions and (2) changing the IRQ from active-high to active-low. This patch addresses the 2.6.22 regression: "no irda0 interface (2.6.21 was OK), smsc does not find chip" I tested this on a Portege 4000. The smsc-ircc2 driver correctly detects the device, and "irattach irda0 -s && irdadump" shows transmitted and received packets. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexander Graf authored
When calling a semctl(IPC_STAT) without IPC_64 the check if the memory is unevaluated. This patch fixes this. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Woodhouse authored
A bug in headers_install for ARCH=x86_64 yields an asm/ directory full of files all of which are using the same #ifdef guard, "__ASM_STUB_" with no postfix. So the second and later asm files #included in the same C file (often through standard headers like ioctl.h) yields no symbols. Strangeness with the Ubuntu 'tell me if I support something that's not explcitly mentioned in POSIX, and I'll strip it out' shell, I believe. We don't need the 'export' but we do need a semicolon at the end of the FNAME line: Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Loic Prylli authored
Processors synchronization in set_mtrr requires the .gate field to be set after .count field is properly initialized. Without an explicit barrier, the compiler was reordering those memory stores. That was sometimes causing a processor (in ipi_handler) to see the .gate change and decrement .count before the latter is set by set_mtrr() (which then hangs in a infinite loop with irqs disabled). Signed-off-by: Loic Prylli <loic@myri.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jason Wessel authored
The commit 635cf99a introduced a regression. Executing a ptrace single step after certain int80 accesses will infinitely loop and never advance the PC. The TIF_SINGLESTEP check should be done on the return from the syscall and not before it. I loops on each single step on the pop right after the int80 which writes out to the console. At that point you can issue as many single steps as you want and it will not advance any further. The test case is below: /* Test whether singlestep through an int80 syscall works. */ #define _GNU_SOURCE #include <stdio.h> #include <unistd.h> #include <fcntl.h> #include <sys/ptrace.h> #include <sys/wait.h> #include <sys/mman.h> #include <asm/user.h> #include <string.h> static int child, status; static struct user_regs_struct regs; static void do_child() { char str[80] = "child: int80 test\n"; ptrace(PTRACE_TRACEME, 0, 0, 0); kill(getpid(), SIGUSR1); write(fileno(stdout),str,strlen(str)); asm ("int $0x80" : : "a" (20)); /* getpid */ } static void do_parent() { unsigned long eip, expected = 0; again: waitpid(child, &status, 0); if (WIFEXITED(status) || WIFSIGNALED(status)) return; if (WIFSTOPPED(status)) { ptrace(PTRACE_GETREGS, child, 0, ®s); eip = regs.eip; if (expected) fprintf(stderr, "child stop @ %08lx, expected %08lx %s\n", eip, expected, eip == expected ? "" : " <== ERROR"); if (*(unsigned short *)eip == 0x80cd) { fprintf(stderr, "int 0x80 at %08x\n", (unsigned int)eip); expected = eip + 2; } else expected = 0; ptrace(PTRACE_SINGLESTEP, child, NULL, NULL); } goto again; } int main(int argc, char * const argv[]) { child = fork(); if (child) do_parent(); else do_child(); return 0; } Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: <stable@kernel.org> Cc: Chuck Ebbert <76306.1226@compuserve.com> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Michael Ellerman authored
elf_core_dump() supports dumping arch specific ELF notes, via the #define ELF_CORE_WRITE_EXTRA_NOTES. Currently the only user of this is the powerpc spu coredump code. There is a bug in the handling of foffset WRT the arch notes, which causes us to erroneously increment foffset by the size of the arch notes, leaving a block of zeroes in the file, and causing all subsequent data in the file to be at <supposed position> + <arch note size>. eg: LOAD 0x050000 0x00100000 0x00000000 0x20000 0x20000 R E 0x10000 Tells us we should have a chunk of data at 0x50000. The truth is the data is at 0x90dbc = 0x50000 + 0x40dbc (the size of the arch notes). This bug prevents gdb from reading the core file correctly. The simplest fix is to simply remember the size of the arch notes, and add it to foffset after we've written the arch notes. The only drawback is that if the arch code doesn't write as many bytes as it said it would, we end up with a broken core dump again. For now I think that's a reasonable requirement. Tested on a Cell blade, gdb no longer complains about the core file being bogus. While I'm here I should point out that the spu coredump code does not work if we're dumping to a pipe - we'll have to wait for 23 to fix that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ralf Baechle authored
The idle loop goes to sleep using the WAIT instruction if !need_resched(). This has is suffering from from a race condition that if if just after need_resched has returned 0 an interrupt might set TIF_NEED_RESCHED but we've just completed the test so go to sleep anyway. This would be trivial to fix by just disabling interrupts during that sequence as in: local_irq_disable(); if (!need_resched()) __asm__("wait"); local_irq_enable(); but the processor architecture leaves it undefined if a processor calling WAIT with interrupts disabled will ever restart its pipeline and indeed some processors have made use of the freedom provided by the architecture definition. This has been resolved and the Config7.WII bit indicates that the use of WAIT is safe on 24K, 24KE and 34K cores. It also is safe on 74K starting revision 2.1.0 so enable the use of WAIT with interrupts disabled for 74K based on a c0_prid of at least that. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Older processors used to encode processor version and revision in two 4-bit bitfields, the 4K seems to simply count up and even newer MTI cores have switched to use the 8-bits as 3:3:2 bitfield with the last field as the patch number. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
The RM7000 processors and the E9000 cores have a bug (though PMC-Sierra opposes it being called that) where invalid instructions in the same I-cache line worth of instructions being fetched may case spurious exceptions. The workaround for this was only enabled for E9000 cores; enable it also for all RM7000-based platforms. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
This effectivly turned the SMTC_IDLE_HOOK_DEBUG debug option into a no-op. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-